Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Power Solutions Product Supplier Routing Guide Effective: November 2014, v3.0 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 TableofContents SUMMARY ..................................................................................................................................................................... 3 SECTION 1: SUPPLIER RESPONSIBILITY ......................................................................................................................... 3 SECTION 2: MODE AND SERVICE .................................................................................................................................. 3 SECTION 3: CONSOLIDATION ........................................................................................................................................ 4 SECTION 4: NORTH AMERICAN INLAND TRUCKLOAD (TL) and LESS‐THAN‐TRUCKLOAD (LTL) SHIPMENTS ................ 4 SECTION 5: ALASKA, HAWAII, PUERTO RICO, GUAM and SAIPAN OCEAN SHIPMENTS FOR CORES/USED BATTERIES.  ...................................................................................................................................................................................... 5 SECTION 6: PARCEL “COURIER” SHIPMENTS (Air and Ground) .................................................................................... 8 SECTION 7: SHIPMENTS REQUIRING SPECIAL HANDLING ............................................................................................ 8 SECTION 8: INSURANCE ................................................................................................................................................ 8 SECTION 9: INTERNATIONAL SHIPMENTS IMPORTED TO THE US ................................................................................ 9 SECTION 10: C‐TPAT .................................................................................................................................................... 12 SECTION 11: DISCREPANCY RESOLUTION ................................................................................................................... 12 APPENDIX A: NON‐COMPLIANCE CHARGEBACKS ....................................................................................................... 13 APPENDIX B: TERMS & DEFINITIONS .......................................................................................................................... 14 APPENDIX C: ISF Template for International Ocean Shipments ................................................................................. 15 APPENDIX D: BILL OF LADING TEMPLATE FOR TL OR LTL US DOMESTIC SHIPMENTS ................................................ 16 APPENDIX E: TMC SUPPLIER SHIPMENT ENTRY SOP .................................................................................................. 17 Page 2 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 SUMMARY Johnson Controls Inc. - Power Solutions (“JCI-PS”), a division of Johnson Controls, Inc., Supplier Routing Guide (“Guide”) provides instructions on carrier selection and shipping specifications for all domestic and international purchases with a point of delivery in the United States. This Guide is the only authorized source of instructions about carrier selection, receiving addresses and shipping specifications for domestic and international purchase orders. Failure to comply with this Guide may result in a minimum chargeback of $150 per shipment along with any additional charges (i.e., fines and penalties) incurred. SECTION 1: SUPPLIER RESPONSIBILITY Please note that the information in this guide is updated periodically and can change without notice. We do not recommend that you print any section of this guide. Please refer to the online version of the Routing Guide found at (http://www.johnsoncontrols.com/content/dam/WWW/jci/Suppliers/ps/Forms/Supplier_Routing_Guidelines.pdf) to make sure you have the most current information available. Acceptance of a JCI-PS Purchase Order is an agreement to this Guide and the JCI-PS Terms and Conditions, which can be found in the Johnson Controls website: (http://www.johnsoncontrols.com/content/us/en/Suppliers/power_solutions/terms_conditions.html) Shipments must be shipped complete and set to arrive within the prescribed delivery window stated on the Purchase Order. Penalties may be imposed on late or early shipments. SECTION 2: MODE AND SERVICE JCI-PS shall always be responsible for the transportation. Therefore, all Suppliers (vendor providers or PS Shipping sites) must prepare their shipments under INCOTERM 2010 FCA (loaded) at Seller’s Premises or another specified location, i.e. Freight Collect. Shipping under an Incoterm other than FCA (loaded) must first be authorized in writing by JCI-PS Transportation and your JCI-PS Buyer prior to shipping. Unless previously approved by JCI-PS, deviation from this requirement will cause a penalty fee and the Supplier will not be reimbursed for the transportation. PICKUP TIMELINE Inland: All Suppliers, unless previously authorized by PS Transportation, must request a pick-up date of at least two (2) business days prior to the ship date for all North America inland shipments. Non-Inland (or International): Suppliers must request a pick-up date of at least two (2) weeks for all noninland shipments, including PR, HI and AK. If the Supplier fails to provide sufficient lead time the Supplier will be fined and charged if any additional freight costs were incurred to ensure on-time arrival (i.e., expediting the shipment). JCI-PS will not be responsible for freight and accessorial charges on non-compliant shipments. If the Supplier has questions regarding the compliance or policies/procedures outlined in this Guide, contact JCI-PS Transportation ([email protected]) prior to scheduling a pick-up on the shipment. If your question/concern needs to be escalated, please contact your assigned JCI Buyer and they will contact a member of the JCI Transportation Team directly. Page 3 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 SECTION 3: CONSOLIDATION Consolidation of LTL shipments within the same week for inbound supplies is required. Multiple LTL (road, air or ocean) shipments per week to the same destination may be charged back to the Supplier and deducted from the current or future invoice. Contact JCI-PS Transportation ([email protected]) if JCI-PS is submitting purchase orders that is impeding you to follow this requirement. Refer to Appendix A for further information. SECTION 4: NORTH AMERICAN INLAND TRUCKLOAD (TL) and LESS-THANTRUCKLOAD (LTL) SHIPMENTS Responsibility It is the responsibility of the Suppliers, unless previously authorized by PS Transportation, to enter all inland TL and LTL shipments in TMC’s internet portal (www.mytmc.com). Entering the shipment into the website will ensure that the best available carrier is utilized to transport your goods and timely updates are provided to JCI-PS to monitor timeliness. Refer to Appendix E for TMC Entry Instructions. Suppliers will be charged back for any loads (TL or LTLs) that are not entered into the TMC portal (refer to Appendix A). Training and Contact Information If the Supplier requires training, the Supplier must contact TMC at the general phone number provided below to schedule a session. Be advised that each region has their own TMC mailbox, follow the legend below to email your representative. Note: Your region is defined by the location of your supplying office. Example Supplier ABC, LLC 1234 W North Ave Cityville, OH TMC Midwest Region Page 4 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Operational Weight Restrictions Shipments with a payload between 150 lbs. – 16,999 lbs. must ship via Less-Than-Truckload (LTL). Shipments with a payload over 17,000 lbs. must ship via Truckload (TL). Documentation Required Bill of Lading It is the responsibility of the Supplier to complete and provide a Straight Bill of Lading to the driver at the moment of pickup. For shipments of non-dangerous goods (non-hazardous materials), it is sufficient for the Supplier to utilize the Bill of Lading that TMC provides after entering shipments into their portal. Contact TMC, if the Supplier is not able to print the Bill of Lading. Suppliers may also utilize the Bill of Lading template on Appendix D, if TMC cannot create the BOL. For an electronic copy, email the [email protected] for request. When utilizing the electronic copies, ensure the following address is listed in the Third Party Freight Charges Field: TMC c/o Johnson Controls Power Solutions 315 N Racine Avenue Chicago, IL 60607 Documentation for Dangerous Goods (Haz Mat) It is the responsibility of the Supplier to complete and provide shipping papers according to any governmental regulations (e.g., Transport Canada and/or US DOT) to the carrier who will be picking up the product. The following two links are to aid in the developed of these shipping papers, however please understand that these links are only guides and do not replace/override any regulations. NOTE: UN2794 Lead Acid, Wet/Used, Batteries are not regulated by US DOT as Haz Mat if the shipment follows the requirements of 49CFR 173.159(e). US DOT: http://phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/shipping_papers_guide.pdf. TRANSPORT CANADA: http://www.tc.gc.ca/media/documents/tdg-eng/shippingdocuments.pdf SECTION 5: ALASKA, HAWAII, PUERTO RICO, GUAM and SAIPAN OCEAN SHIPMENTS FOR CORES/USED BATTERIES. Responsibility It is the responsibility of the Supplier to schedule a pickup by contacting the freight forwarder listed in the table below. Contact Information Customers with: Email for instructions: GMSPO (AC DELCO) [email protected] Autozone Napa Sam’s Club Sears Wal-Mart Jeff Olwell [email protected] Aaron Carr [email protected] For inquiries [email protected] Page 5 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Documentation Required Bill of Lading For all core returns, the CRAN will act as the Bill of Lading for the shipment. Any additional documentation, the Freight Forwarder responsible for picking up the shipment will create them. However, as the Shipper it is your responsibility to provide any required information. CRANs (Core Return Authorization Number) The Supplier is responsible for ensuring that the Core shipment is accompanied by its respective CRAN indicating the number of pallets picked up. If at the moment of pickup, your facility does not have any cores, you are still required to sign off the CRAN. If you do not have an assigned CRAN please contact [email protected]. Page 6 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Core Battery Packaging Guidelines Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Billing Information These shipments are not entered into TMC, therefore the following address must be entered on the Bill of Lading’s Third Party Freight Charges field: Trans International, LLC c/o Johnson Controls Power Solutions N93 W16288 Megal Drive Menomonee Falls, WI 53051-1503 SECTION 6: PARCEL “COURIER” SHIPMENTS (Air and Ground) For shipments less than 150 lbs., contact your local FedEx or UPS office to schedule a pickup (unless your shipment requires special handling (i.e., fragile equipment/material) and it must ship LTL, in which refer to Section 4 for LTL instructions). Utilize the JCI-PS Third Party Accounts listed below to bill JCI-PS. JCI-PS’ preferred courier is FedEx, if FedEx cannot pick up the shipment, schedule with UPS. Only approved Suppliers may ship utilizing any Air modes (e.g., FedEx SameDay, FedEx First, FedEx Priority, FedEx 2Day, UPS NDA, UPS 2DA). Contact your respective JCI Buyer to confirm if you are an authorized Supplier. Courier FedEx UPS (For Meadowbrook shipments utilize FedEx) Account Number **Contact JCI Buyer for Acct. No** Note: For international shipments refer to Section 9. SECTION 7: SHIPMENTS REQUIRING SPECIAL HANDLING Contact your TMC Regional Inbox (See Section 4) and CC the [email protected] for shipments requiring same-day delivery (i.e., expedited) or specialized equipment (i.e., over-dimensional, heavy lift or out-of-gauge shipments). If your shipment is under 150 lbs and requires it to be crated and palletized, refer to Section 4 for LTL. SECTION 8: INSURANCE Insurance is only required to cover the following amounts by mode on Domestic shipments, including shipments between the U.S. and Mexico and between U.S. and Canada: Truckload (U.S.): LTL: Ground Parcel: Air Shipments: No supplemental insurance is required. Insure shipment value that exceeds $25 per lb. up to $50,000. Insure the lesser of the value of the shipment of $50,000. Insure the lesser of the value of the shipment or $50,000. Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 SECTION 9: INTERNATIONAL SHIPMENTS IMPORTED TO THE US   Importer of Record: JCI-PS shall always be responsible for US Customs Clearance o The commercial/pro forma invoice must include the following statement: “JCI-PS will be the Importer of Record in the United States.” JCI-PS’ preferred Incoterm is FCA (loaded @ Seller’s Premises), deviation from that must be approved prior to shipping. NOTE: Any exception to the two requirements mentioned above, must be documented and authorized via the [email protected] email. Failure to comply may result in a chargeback to the Supplier. General Requirements  All documents must be in English and Invoice amounts are preferred to be in US dollars.  Each product must be listed in separate line items on the commercial invoice  Any values unrelated to the sale of the product must be segregated and declared on the commercial invoice. o For Example: Freight, Insurance, Manufacturing Assists, etc… Document Requirements for International Shipments A Commercial Invoice, Packing List and Bill of Lading are required documents to facilitate an entry into the United States. 1. Commercial Invoice/Pro Forma Invoice Requirements  JCI-PS Ship-To address and Invoice-To address: include the contact name and telephone number of the JCIPS buyer.  The complete Supplier name and address; include a contact name, telephone number, and email address  The Delivery Terms (INCOTERMS 2010) for the shipment: FCA (loaded @ Seller’s Premises). Unless previously authorized by JCI-PS.  Each line item on the commercial invoice must have: o Part Number o Detailed description: (NOTE: Do not use abbreviations. The part number by itself is NOT a sufficient description.) o Export country’s Harmonized Tariff Schedule Number (check your government’s customs website for detail) o In order to prevent any delays during importation, this information must be determined prior to scheduling a pick up. If you require additional assistance email, with specific part detail, [email protected] and [email protected]. o Manufacturing Country of Origin. Per the US Customs Regulations 19 CFR 134, the country of origin information on the invoice must be consistent with the country of origin marked on the article, and consistent with the country of origin identified on the supporting documents. o Unit Price o NOTE: Zero-values are not allowed. If the product is a Free of Charge sample, apply a Fair Market Value with the following statement next to the item: “F.O.C – Value for Customs Purposes Only” and add it to the Total Value. o Quantity o Unit of Measure (i.e. each, pounds, kg, piece, etc.) o Extended Cost o Currency Identifier  Discount/Rebate Amount (if applicable)  Insurance Charges (if applicable)  Shipper’s Signature & Date  Invoice total value  Total number of packages, including number of empty cartons  Total Gross Weight of shipment in LBS or KGS  Total Net Weight of shipment in LBS or KGS Page 9 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 2. Packing List Requirements The following elements are required on the packing list:  JCI-PS’ Purchase Order (PO) number Part number(s) and description,  Quantity of each part number/pallet  Description  Number of Pieces  Net weight in LBS or KGS  Gross weight in LBS or KGS 3. Bill of Lading (BOL)  For Ocean and Air Freight shipments, the designated Forwarding Agent will help prepare the Bill of Lading, however you must provide them any necessary information.  For Air Courier shipments, the Supplier shall prepare the airway bill.  Contact the [email protected] inbox should any questions arise. 4. ISF 10+2 Data (Ocean Only) – Applicable when JCI-PS is the Importer of Record. Routing Guide for shipments imported into the U.S. On any pickup requests please make sure that you include the following information, failure to do so may result in the delay of your request:      Origin Address: Where is the freight being picked up? Origin Contact Information: Name, E-mail, Phone Number Destination Address: Where is the freight shipping to? Pieces, weight and dimensions Commodity HTS (if hazardous, UN is required)  Small Package Shipping Instructions (<70 kg, <150 lbs) Contact Greg Fields ([email protected]) and Joseph D'amato ([email protected]) from DHL Express to help coordinate pick up at your facility. CC [email protected] on the request. NOTE: For Meadowbrook/Holland shipments, contact [email protected] and [email protected].  Air Freight (>150 lbs) – Authorization required. Authorization from JCI-PS via [email protected] is required prior to scheduling a shipment via Air Freight. Any Air Freight sent without prior authorization will be charged back to the Supplier. NOTE: For Meadowbrook/Holland shipments, contact [email protected] and [email protected].  Ocean Freight Shipping Instructions For Puerto Rico shipments email David Allegretti at [email protected] For non-Puerto Rico shipments email [email protected] at DHL to request pickup and he will help coordinate. CC to [email protected] on the request. NOTE: For Meadowbrook/Holland shipments, contact [email protected] and [email protected].  Ocean Freight Compliance ISF 10+2 Filing is a US Customs requirement and all Suppliers are required to submit the 10+2 elements, review Appendix C, to DGF 72 hours prior to lading. NOTE: Email the ISF 10+2 requirements, and all export documents to [email protected] with a CC to [email protected] (this is a separate email to the pickup request). NOTE: For Meadowbrook/Holland shipments, contact [email protected] and [email protected]. Page 10 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 If you wish to obtain an electronic copy of the ISF Form, email [email protected]. NOTE: Shipments sent with forwarders/carriers that have not been approved by JCITransportation will be billed to the Supplier. Contact Information for International Shipments Import/Export Shipment Support Third Party Compliance Consultant [email protected] International Customs Services, Inc. N64 W23801 Main Street, Suite 121 Sussex, WI 53089 Ph: 262-820-2700 Fx: 262-820-2727 Johnson Controls Power Solutions Support [email protected] 5757 N Green bay Ave. Mail Station X-11 Milwaukee, WI 53209 Ph: 414-524-3330 Fx: 414-524-3191 Authorized US Customs Brokers For Non-CA and Non-MX Origin Shipments: [email protected] DHL Global Forwarding 11101 Metro Airport Center Dr. Ste 107 Romulus, MI 48174 United States Phone: 734-229-3244 Fax: 734-941-1989 For Meadowbrook Li-ion Bound Shipments : [email protected] For CA BoundShipments : [email protected] [email protected] (519) 246-9800 Ext. 5304 ; Team 70 For MX Bound Shipments : T&T Forwarding Services Mayra Silva [email protected] (956) 717-5411 Richer/TPW Laredo, TX (956) 693-5956 El Paso, TX (915)249-9233 Page 11 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 SECTION 10: C-TPAT JCI-PS is an active participant in Customs Trade Partnership Against Terrorism (C-TPAT). C-TPAT is a voluntary joint government-business partnership to enhance supply chain and border security. As a JCI-PS Supplier, you also have a role to play in ensuring the security of the supply chain. We are asking JCIPS’ Suppliers to assess, and enhance if necessary, their security processes in the following areas recommended by U.S. Customs: Physical Security, Access Control, Procedural Security, Personnel Security, Education and Awareness Training. Guidelines for establishing, improving, or amending supply chain security procedures. Manufacturer Security Recommendations: Non-U.S. JCI-PS Suppliers should develop and implement a sound plan to enhance security procedures. The following are general recommendations that should be applied on a case by case basis, depending on the Supplier’s size and structure. These recommendations may not be applicable to all JCI-PS Suppliers. JCI-PS Suppliers should have a written security procedure plan in place that addresses the following areas of concern:  Physical Security  Access Controls  Procedural Security  Personnel Security  Education and Training Awareness Additional Information on C-TPAT Additional information is available on the U.S. Customs Web site, under Security Criteria for C-TPAT Imports at: http://www.cbp.gov/xp/cgov/trade/cargo_security/ctpat/ctpat_application_material/ctpat_security_guidelines/importe rs/ Adherence to the C-TPAT security recommendations is critical to strengthening security for all supply chain members. Your assistance in this endeavor is required. SECTION 11: DISCREPANCY RESOLUTION Johnson Controls Power Solutions is instituting a statute of limitations of 120 days to resolve any payment discrepancies. Exception: Any ongoing claims or any prior written notifications to Johnson Control associates regarding issue resolutions Page 12 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 APPENDIX A: NON-COMPLIANCE CHARGEBACKS It is JCI-PS policy to chargeback Suppliers for costs incurred for non-compliance to the requirements described in this Guide. The purpose of chargebacks is not to create revenue for the Company, but to recover operating expenses incurred for correcting Supplier errors. This policy creates awareness with our Supplier partners, ensures cost recovery and supports the goals of JCI-PS and its supply chain. Suppliers must appeal all charge back reviews within 30 days of the date the chargeback was issued. Suppliers failing to appeal within 30days from the date of the chargeback issuance will not be eligible for any refunded amounts. Any questions or concerns pertaining to chargeback issuance, negotiation, and/or refunds need to be directed to [email protected]. Be sure to include the following information: 1. Name of Contact 2. Title 3. Mailing Address 4. Phone Number 5. Fax Number 6. E-mail Address 7. Vendor P.O. Number for Chargeback in Question 8. Violation Number Below are examples on what JCI could potential charge back the Supplier, however be advised that this is not an all-inclusive list and JCI reserves the right to chargeback for any violations to this Supplier Routing Guide. Non-Compliance Issue Chargeback Expense Multiple LTL shipments per week to the same destination $150 plus JCI-PS cost incurred per occurrence Merchandise routed without JCI-PS / TMC notification $150 plus JCI-PS cost incurred per PO/shipment Failure to notify JCI-PS Transportation of changes on domestic routing prior to shipping that result in unnecessary transportation expense $150 plus the difference between standard freight cost and actual freight costs incurred per shipment Unauthorized routing used for domestic shipment $150 plus freight cost difference between standard freight cost and actual freight costs incurred per shipment Failure to follow instructions for imported shipments $150 plus the any issued US CBP fines Vendor shipped merchandise to wrong location $150 plus JCI-PS cost incurred per PO/shipment Detention of JCI-PS routed carrier, or canceling carrier after dispatched for pickup $150 plus actual carrier charges incurred Merchandise received after “cancellation” date of P.O. $150 plus actual carrier charges incurred Merchandise received prior to “ship on” date of P.O. $150 plus actual carrier charges incurred Load size (cube, weight, linear feet) provided does not match actual $150 plus additional freight charges Orders delivered with loose and/or damaged merchandise $150 per occurrence + rework cost Failure to provide all required JCI-PS documentation as specified within 45 days $150 per occurrence No BOL or inaccurate/insufficient detail on BOL $150 per occurrence Insufficient packaging resulting in DOT violation, and/or additional labor to rework. $/hr and administrative fee $25 Commercial Invoice does not meet the criteria outline in these Instructions $25 per occurrence Supplier/Vendor utilizing the TMC website to enter TL or LTL shipment information $150 per occurence Page 13 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 APPENDIX B: TERMS & DEFINITIONS AP or A/P Accounts Payable BOL Bill of Lading BOM Bill of Material C-TPAT Customs – Trade Partnership Against Terrorism DC Distribution Center Drop-trailer Trailer left at the delivery location for future unloading EDI Electronic Data Interchange – computer-to-computer exchange of business documents between companies, using a public standard format FOB (Free on Board) Term of sale indicating that seller will deliver to the Company at seller’s expense, and seller assumes all responsibilities up to place of delivery including insurance, risk of loss, etc. JCI-PS Johnson Controls Inc. – Power Solutions Live-delivery Trailer unloading method that requires merchandise to be received at date and time of delivery to location LTL Less Than Truckload – term used to describe a shipment of merchandise which is too small for the use of a single trailer MBOL Master Bill of Lading – used to consolidate several BOL numbers into a single number PO Purchase Order SKU Stock Keeping Unit Supplier Referred to as the origin site (Vendor or PS Shipping Site) TL Truck Load – term used to describe a shipment of merchandise which must use a single trailer TMC Transportation Management Company TMS Transportation Management System UPC Universal Product Code PS Transportation Refers to the Transportation department in PS HQ in Milwaukee. You may contact them by emailing [email protected]. Page 14 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 APPENDIX C: ISF Template for International Ocean Shipments (Email [email protected] for an electronic copy of this form) Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 APPENDIX D: BILL OF LADING TEMPLATE FOR TL OR LTL US DOMESTIC SHIPMENTS (Email [email protected] for an electronic copy) Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 APPENDIX E: TMC SUPPLIER SHIPMENT ENTRY SOP JCI Supplier Shipment Entry SOP Business Purpose: The purpose of the document is to give suppliers instruction on how to enter a JCI-PS supplier shipment into the TMC system. The TMC system tenders the shipment, books the carrier, and gives the supplier access to tracking , Bill of Lading (BOL) prints, and carrier pro number documentation. Audience: JCI-PS Suppliers Approved by: Dominic Crotty Last Updated: 2/12/2014 Table of Contents Overview .......................................................................................... 18 Process............................................................................................... 2 Login .................................................................................................. 2 Enter a Unique Reference Number ......................................................... 3 Enter Origin ........................................................................................3 Enter Destination ................................................................................. 4 Enter a Commodity .............................................................................. 5 Other Features and Final Shipment Submission ........................................ 6 Add Carrier Pro Number After Pick Up ..................................................... 6 Cancel a Shipment ............................................................................... 7 Appendix A: Transit Miles ...................................................................... 8 Links to Related ...................................................................................8 Page 17 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Overview This document aligns with the Johnson Controls Power Solutions Supplier Routing Guide effective October 2013; in which Section 4 states that “All U.S. Domestic shipments, TL, Flatbed, and LTL must be entered through TMC internet portal: http://www.chrobinson.com/en/us/. If access and/or training are required, contact TMC at 1-800-967-9619 x2015 or email [email protected].” Suppliers are reminded that shipments with a payload over 17,000 lbs. must ship via Truckload (TL). Shipment with a payload between 150 lbs. – 16,999 lbs. must ship via Less-Than-Truckload (LTL). Also, suppliers need to have the following information readily available in order complete shipment entry steps. ● Shipper Name ● Shipper Address ● Shipper Hours ● Shipping Date ● Shipper Contact & Phone Number ● Destination Name ● Destination Address ● Destination Contact & Phone Number ● Requested Delivery Date ● JCI Purchase Order # ● Commodity Description ● Freight Class ● Total Weight ● Piece Quantity ● Pallet Count ● Pallet Size Length (in feet and inches), Width (in inches), & Height (in inches) ● Cargo Value (for TL and Flatbed) …And the most important information to answer: Is the commodity hazardous? If the commodity is hazardous, you must provide the following hazardous information ● Technical Name Req ● UN/NA# ● Regulatory Authority Code ● Technical Name ● Hazardous Class ● Class Packing Group ● Reportable Quantity ● Primary Commodity ● NOS Commodity ● Emergency Response Phone Number ● Placarded Follow the next steps for shipment entry. Process  Login  1. Go to http://www.chrobinson.com/en/us/ and enter your username and password. 2. When logged in, select Manage Shipments on the left side menu, and then select Enter Shipment Page 18 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 3. Next, select the account (C4773063 – JCI ==Supplier Non-Lead) and shipment type (mode) and create shipment. NOTE: If the shipment commodity is HAZARDOUS, you MUST select account C4773064 – JCI ==Hazmat Online Entry. If the shipment commodity is HAZARDOUS WASTE CLASS 9, you MUST select account C6884633 – JCI==Haz-Waste. The shipment type (mode) defaults to LTL, so use the drop down to change to TL or Flatbed when appropriate. Enter a Unique Reference Number 4. Enter a reference number, which must be unique. The suggested format for reference number is the customer purchase order and the suppliers internal order number. For example, JCIPO#InternalOrder# (123456789-56789). This will help ensure a unique reference number is used every time. Duplicate reference numbers will be communicated by TMC to supplier. Upon communication, the supplier must enter the shipment again with a unique reference number. Enter Origin 5. Origin will default to your shipper. However, if you are using multiple ship points then your origin will be blank and you will need to utilize the drop down menu for locations.  If you cannot find your location, then search for existing locations.   Search City and State.   (Note on glitches: Do not be deceived by the requirement asterisks, as the fields are NOT required!  And the location selection is very sensitive, as once you click a result it will automatically close the search location and the result now appears in your origin.)  Page 19 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209   6. Enter the pick-up date as an appointment or a range. Appointment Range Enter Destination 7. Destination is selected from the drop down menu or by searching for an existing location. 8. Enter a requested delivery date based on transit or customer given due date. See transit chart below. Transit Miles Transit Days 0‐500 1   501‐1000 2   1001‐1500 3   1501‐2000 4   2001‐2500 5             Page 20 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 Enter a Commodity 9. Add a new commodity when the product you ship is not on the drop down menu. NOTE: for HAZARDOUS shipments (accounts C4773064 and C6884633), ALWAYS first peruse the drop down menu to select the commodity.  If the commodity is not available on drop down menu, then you can “Add New Commodity”. 10. All the required fields for Commodity must be filled out in Identifiers, Details, and Reference Numbers & Notes and saved. (Note: example images below are for LTL mode, and fields for TL mode may not have all fields shown below) a. Identifiers b. Details c. Reference Numbers & Notes Other Features and Final Shipment Submission Page 21 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 11. BOL’s are automatically emailed once the carrier is booked. Just fill in all the email addresses you need. 12. Do you ship this lane frequently? Save the shipment as a Template by giving it a name. 13. Finally, select Submit Shipment. 14. A shipment confirmation number is generated. Add Carrier Pro Number After Pick‐Up  15. The supplier should receive a carrier pro number from the driver upon pick‐up of the freight/BOL.  Enter that carrier pro number on the website.  NOTE: Remove any dashes or spaces from the pro number.  For example, pro 921‐45645589 should be entered in as 92145645589.   16. The shipment can be searched in the Quick Track to access the “i” icon.     Page 22 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209  17. In the shipment detail, scroll to the bottom of the detail and select “Edit Carrier Info”.   18. A new window will pop up, then input the carrier pro #, and save. REMEMBER: Remove any dashes or spaces from the pro number.  For example, pro 921‐45645589 should be entered in as 92145645589.                      Cancel a Shipment                         19. If you need to cancel a shipment, select the View Shipment Detail link or “i” icon  The shipment can be searched in the Quick Track to access the “i” icon.     20. In the shipment detail, you will need to remove the carrier (if a carrier is booked) in order to cancel the shipment. Scroll to the bottom of the detail and select the link to “remove carrier”. A new window will pop up and select the reason for removal and submit. 21. Then at the top of the shipment detail, select the “cancel shipment” link, and a new window will pop up to shipment. Submit cancellation, and the shipment will be cancelled from TMC system. Page 23 of 24 Johnson Controls, Inc. Power Solutions 5757 N. Green Bay Avenue Milwaukee, WI 53209 22. Finished Appendix A: Transit Miles Transit Miles Transit Days 0‐500 1   501‐1000 2   1001‐1500 3   1501‐2000 4   2001‐2500 5             Links to Related  www.chrobinson.com  Page 24 of 24
© Copyright 2024 Paperzz
