close

Enter

Log in using OpenID

Assoc. Prof. Dr. Mehmet ÇEVİK

embedDownload
Assoc. Prof. Dr. Mehmet ÇEVİK
EDUCATION
Degree
Undergrad
M.S.
Ph.D.
University
Boğaziçi University
Boğaziçi University
Celal Bayar University
Department / Program
Civil Engineering
Graduate School, Civil Engineering
Graduate School, Mechanical Engineering
Years
1986-1990
1991-1993
1994-2000
CONTACT INFORMATION
Address
Celal Bayar Univ., Faculty of Engineering, Dept. of Mechanical Engineering, Muradiye, Manisa
Phone
Fax
+90 236 201 2003, VOIP: 2003
+90 236 241 21 43
e-mail
Web page
[email protected], [email protected]
http://mehmetcevik.cbu.edu.tr/
POSITIONS & EMPLOYMENT
Affiliation
Celal Bayar University, Mechanical Engineering
Position
Associate Prof.
Years
2011-
Celal Bayar University, Mechanical Engineering
Dokuz Eylül University, İzmir Vocational School
Assistant Prof.
Assistant Prof.
2011
2010-2011
Gediz University, Engineering Faculty
Faculty Member (Part time)
2009-2013
Dokuz Eylül University, Maritime Faculty
Dokuz Eylül University, Civil Engineering
Dr. Instructor (Part time)
Dr. Instructor (Part time)
2010-2011
2009-2011
Dokuz Eylül University, İzmir Vocational School
Celal Bayar University, Mechanical Engineering
Dr. Instructor
Research Assistant
2000-2010
1997-2000
Yalı Construction Co., İzmir
Lale Construction Co., İstanbul
Project Engineer
Project Engineer
1993-1997
1990-1991
ADMINISTRATIVE ACTIVITIES & COMMITTEE MEMBERSHIP
Affiliation
Celal Bayar University, Bologna Control Group
Position
Head
Years
2014-
Celal Bayar University, Research Commission
Celal Bayar University, Student Affairs and
Education Commission
Celal Bayar University, Bologna Coordination
Commission
Celal Bayar University, Health Culture and Sports
Commission
Commission Member
2012-
Commission Member
2012-
Commission Member
2012-
Commission Member
2012-
Celal Bayar University, Faculty of Engineering
Faculty Board Member
2011-
Celal Bayar University, Mechanical Engineering
Vice Head of Department
Celal Bayar University, Faculty of Engineering
Celal Bayar University, Mechanical Engineering
Vice Dean
Head of Mechanics Subdiscipline
20112011-
Celal Bayar University, Faculty of Engineering
Celal Bayar University, Continuing Education
Center
Celal Bayar University, Transportation Com.
Faculty Executive Council Member
2011-
Advisory Board Member
2011-
Commission Member
2011-
Celal Bayar University, Mechanical Engineering
Dokuz Eylül University, İzmir Vocational School
Head, Commission for Strategic Planning
Coordinator, Construction Program
2011
2009-2011
Dokuz Eylül University, İzmir Vocational School
Member, Scholarship Commission
2004-2007
2012-2013
THESIS
M.S.
Ph.D.
Structural lightweight aggregate concrete (Advisor: Prof. Dr. Vedat Yerlici)
Nonlinear vibrations of suspension bridges (in Turkish) (Advisor: Associate Prof. Dr. Mehmet
Pakdemirli)
Research Interests
Foreign Language
Mechanical vibrations, Perturbation techniques, Composite materials, Finite Element
Method, Taylor series solutions
English (Advanced; 2005 ÜDS: 91.25; 2007 KPDS: 94)
ORIGINAL PUBLICATIONS
Articles Published in Journals Indexed by SCI
M. Çevik, M. M. Bahşı, M. Sezer, "Solution of the delayed single degree of freedom system equation
1
by exponential matrix method”, Applied Mathematics and Computation,
http://dx.doi.org/10.1016/j.amc.2014.05.111, 2014.
Mehmet Çevik, "Application of Taylor Matrix Method to the Solution of Longitudinal Vibration of
2
Rods", Mathematical and Computational Applications, Vol. 15, No. 3, 334-343, 2010.
Mehmet Çevik, "Effects of Fiber Orientation on Out-of-plane and In-plane Natural Frequencies of
3
Angle-ply Laminated Composite Arches", Journal of Reinforced Plastics and Composites, Vol.28, No.1,
59-71, 2009.
N. Kurt, M. Çevik, "Polynomial Solution of the Single Degree of Freedom System by Taylor Matrix
4
Method", Mechanics Research Communications, Vol.35, No.8, 530-536, 2008.
Mehmet Çevik, "Elastic-Plastic Thermal Stress Analysis of an Aluminum Metal-Matrix Composite Arch
5
Under Steady-State Temperature Distribution", Science and Engineering of Composite Materials,
Vol.14, No.1, 57-66, 2007.
Mehmet Çevik, "An Elastic-Plastic Thermal Stress Analysis of Cross-ply and Angle-ply Aluminum
6
Metal-Matrix Composite Arches", Journal of Reinforced Plastics and Composites, Vol.26, No.2, 169181, 2007.
Mehmet Çevik, Mehmet Pakdemirli, "Non-linear Vibrations of Suspension Bridges with External
7
Excitation", International Journal of Non-linear Mechanics, Vol.40, No.6, 901-923, 2005.
Articles Published in Other International Refereed Journals
Bahşı, M., M. and M. Çevik, “Taylor Matrix Solution of the Mathematical Model of the RLC Circuits,”
1
Mathematical and Computational Applications, Vol. 18, No.3, 467-475, 2013.
Mehmet Çevik,"In-plane Vibration Analysis of Symmetric Angle-ply Laminated Composite Arches",
2
Gazi University Journal of Science, Vol. 23, No.2, 187-199, 2010.
Articles Published in National Refereed Journals
Mehmet Çevik, "Effect of Fiber Angle on Out-of-plane and In-plane Natural Frequencies of Laminated
1
Composite Beams", Sigma Mühendislik ve Fen Bilimleri Dergisi, Cilt: 26, Sayı: 2, 112-123, 2008.
2
3
Mehmet Çevik, "Çapraz-Tabakalı ve Açılı-Tabakalı Kompozit Konsol Kirişlerin Serbest Titreşim Analizi",
Fırat Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt 19, No. 2, 139-145, 2007.
Mehmet Çevik, "Thermal Elastic-Plastic Stress Analysis of Steel Fiber Reinforced Aluminum MetalMatrix Composite Arches", Sigma Mühendislik ve Fen Bilimleri Dergisi, 2006/4, 92-99, 2006.
International Conference Proceedings
Sınır, S. and M. Çevik, “Taylor Matrix Solution of Euler-Bernoulli Beam Equation subjected to Static
1
Loads,” Proc. 4th Int. Conference on Mathematical and Computational Applications, Manisa, 382-389,
June 11-13, 2013.
Köksal, N. S., A. Kayapunar and M. Çevik, “Fatigue Analysis of a Notched Cantilever Beam using Ansys
2
Workbench,” Proc. 4th Int. Conference on Mathematical and Computational Applications, Manisa,
111-118, June 11-13, 2013.
Baykuş, N., M. Çevik and M. Sezer, “Numerical Solution of the Single Degree of Freedom System by a
3
Practical Collocation Method Based on the Chebyshev Polynomials,” Proc. 2nd Int. Symposium on
Computing in Science & Engineering, Kuşadası, 238-244, June 1-4, 2011.
Özkaya, E. and M. Çevik, “Transverse Vibrations of Fluid Conveying Pipes with Small Flexural
4
Stiffness,” Proc. 3rd Int. Conference on Mathematical and Computational Applications, Konya, 69-78,
September 4-6, 2002.
Çevik, M. ve M. Pakdemirli, “Asma Köprülerin Nonlineer Serbest Titreşimleri,” Proc. 2nd Int.
5
Conference on Mathematical and Computational Applications, Baku, Azerbaijan, 205-215, September
1-3, 1999.
National Conference Proceedings
Bahşı, M. M. ve M. Çevik, “Eksenel Yüklemeye Maruz Değişken Kesitli Euler-Bernoulli Kirişinin Üstel
1
Matris Yöntemi ile Enine Titreşim Analizi”, XVIII. Ulusal Mekanik Kongresi, 94-104, Manisa, Ağustos
2013.
Sınır, S. ve M. Çevik, “Üç Serbestlik Dereceli Kütle-Yay Sisteminin Serbest Titreşim Analizi için Taylor
2
Matris Yaklaşımı”, XVIII. Ulusal Mekanik Kongresi, 581-588, Manisa, Ağustos 2013.
Çevik, M. ve N. Baykuş, “Tek Serbestlik Dereceli Titreşim Sisteminin Laguerre Polinomları ile Matris
3
Çözümü”, XVII. Ulusal Mekanik Kongresi, 000-000, Elazığ, Eylül 2011.
Çevik, M. ve N. Baykuş, “Tek Serbestlik Dereceli Titreşim Sisteminin Taylor Matris Yöntemi ile Polinom
4
Çözümü”, XVI. Ulusal Mekanik Kongresi, 427-431, Kayseri, Haziran 2009.
Çevik, M., “Basit mesnetli simetrik çapraz- ve açılı-tabakalı kompozit kirişlerin etkileşimli serbest
5
titreşimleri”, XV. Ulusal Mekanik Kongresi, 287-297, Isparta, Eylül 2007.
Çevik, M., E. Özkaya ve M. Pakdemirli, “Asma Köprülerin Tabii Frekanslarının Yapay Sinir Ağları ile
6
Hesaplanması”, Bilim Günleri, 187-191, Denizli, Mayıs 1999.
Çevik, M., “Yüksek Fırın Cürufu ve Uçucu Külden Taşıyıcı Hafif Agrega Üretimi”, Endüstriyel Atıkların
7
İnşaat Sektöründe Kullanılması Sempozyumu, 235-242, Ankara, Kasım 1993.
Books & Chapters in Books
1
Other Publications
Unpublished Conference Paper – Baykuş, N., M. Çevik and M. Sezer, “Laguerre Polynomial Solution of
1
Fredholm Integro-Differential Equations by a Practical Matrix Method”, Int. Conference on Applied
Analysis and Algebra, Yıldız Technical University, Istanbul, June 29-July 2, 2011.
Unpublished Conference Paper – Çevik, M., “Out-of-plane Vibration Analysis of Symmetric Angle-ply
2
Laminated Composite Arches”, 1st Int. Symposium on Computing in Science & Engineering, Kuşadası,
June 3-5, 2010.
Unpublished Conference Paper – Çevik, M., “Elastik çubukların burulma titreşimlerinin Taylor matris
3
yöntemi ile çözümü”, IX. Dinamik Sistemler Çalıştayı, İzmir, Haziran 2009.
LETTER TO THE EDITOR–Çevik, M., E. Özkaya and M. Pakdemirli, “Natural Frequencies of Suspension
4
Bridges: An Artificial Neural Network Approach,” J. Sound Vibration, 257, 596-604 (2002).
# of Articles in SCI-Expanded
# of Citations in SCI-Expanded
7
12
PROJECTS
Date
Institution
1
2014-
SAN-TEZ
2
2014-
CBÜ-BAP
3
2013-
CBÜ-BAP
4
2012-2013
TÜBİTAK
2209
5
2006-2007 TÜBİTAK
6
1999-2001
DPT
Subject
Fatigue crack behavior in leaf springs and modeling leaf life by
finite element method and verification by physical tests, Project
No: 0369.STZ.2013-2
Analysis of delay differential equations via perturbation-iteration
method
Vibration analysis of variable section functionally graded material
(FGM) beams
Design of a new Go-kart chassis and prototype manufacturing
Free vibration analysis of angle-ply laminated composite beams,
Project No: 106M154
Linear and nonlinear vibrations of suspension bridges,
Project No: 99K120240
Position
Executer
Supervisor
Supervisor
Supervisor
Coordinator
Researcher
MENTORING ACTIVITIES
Masters Students
1
2
Özer Tatar, Analysis of beam vibration equations by Taylor matrix method
Özgün Sunar, Fatigue analysis of leaf springs by finite element method
Doctoral Students
1
M. Mustafa Bahşı, Analysis of delay differential equations via perturbation-iteration method
2
Sümeyye Sınır, Vibration of variable section functionally graded material beams
REFEREE ACTIVITIES
Journal
International
National
10
3
Congress,
Symposium
International
National
2
2
ORGANIZING ACTIVITIES IN SYMPOSIUM & CONGRESS
1
2
3
4
Name of Activity
XVIII. National Mechanics Congress, August 26-30, 2013, Manisa, Türkiye
Fourth Symposium on Mathematical and Computational Applications, 11-13 June 2013,
Manisa, Türkiye.
Second International Symposium on Mathematical and Computational Applications,
Baku, Azerbaijan.
First Symposium on Mathematical and Computational Applications, Manisa, Türkiye.
Year
2013
2013
1999
1996
MEMBERSHIPS
Association
Years
1
2
Association for Scientific Research, Manisa.
UCTEA Chamber of Civil Engineers, İzmir Branch
19931994-
3
Association of Architects and Engineers Group, İzmir Branch
2007-
AWARDS AND HONORS
Institution
Years
1
Tübitak Publication Award (6 times)
2005-2010
2
3
COURSES GIVEN IN THE LAST TWO YEARS
Year
Semester
Place
Course Name
Level
2013-2014
Spring
Celal Bayar Uni. Mechanical Eng
Celal Bayar Uni. Mechanical Eng
Strength of Materials 2
Professional English
Undergrad.
Undergrad.
2013-2014
Fall
Celal Bayar Uni. Mechanical Eng
Celal Bayar Uni. Mechanical Eng
Finite Elements Method
Technical Drawing
Graduate
Undergrad.
Gediz Uni. Engineering Faculty
Strength of Materials 1
Undergrad.
2012-2013
Spring
Celal Bayar Uni. Mechanical Eng
Undergrad.
Gediz Uni. Engineering Faculty
Celal Bayar Uni. Mechanical Eng
Strength of Materials 2
Computer Applications in
Mechanical Engineering
Finite Elements Method
Strength of Materials 1
Celal Bayar Uni. Mechanical Eng
Professional English
Undergrad.
Celal Bayar Uni. Mechanical Eng
Celal Bayar Uni. Mechanical Eng
Graduate
Undergrad.
Celal Bayar Uni. Mechanical Eng
Finite Elements Method
Strength of Materials 2
Computer Applications in
Mechanical Engineering
Strength of Materials 1
Celal Bayar Uni. Mechanical Eng
Introduction to Finite Elements
Undergrad.
Celal Bayar Uni. Mechanical Eng
Celal Bayar Uni. Mechanical Eng
Finite Elements Method
Strength of Materials 2
Graduate
Undergrad.
Celal Bayar Uni. Mechanical Eng
Celal Bayar Uni. Mechanical Eng
Introduction to Finite Elements
Finite Elements Method
Dokuz Eylül Uni. Maritime Fac.
Strength of Materials
Dokuz Eylül Uni. Maritime Fac.
Statics
Undergrad.
Graduate
Undergrad.
Undergrad.
Celal Bayar Uni. Mechanical Eng
2012-2013
2011-2012
Fall
Spring
Celal Bayar Uni. Mechanical Eng
2011-2012
2010-2011
Fall
Spring
CV last updated
June 17, 2014
Undergrad.
Graduate
Undergrad.
Undergrad.
Undergrad.
Author
Document
Category
Uncategorized
Views
1
File Size
230 KB
Tags
1/--pages
Report inappropriate content