Uddeholm Sleipner Stock Standard Flat bar Soft annealed/Unmachined Soft annealed/Rough machined mm 30 38 45 57 69 82 86 108 127 133 153 158 160 166 203 210 250 254 260 300 305 407 457 528 6 8 10 12 15 18 22 27 28 32 35 38 43 50,8 54 The stock standard might change without notice 60 63,5 67 70 80 90 102 153 178 203 300 Issue date July, 2014 1 (3) Uddeholm Sleipner Stock Standard Square bar Soft annealed/Unmachined Soft annealed/Rough machined mm 18 28 43 57 69 82 86 102 127 153 203 254 50 50,8 55 60 63,5 70 76,2 280 290 Round bar Soft annealed/Unmachined o Soft annealed/Machined mm 13 16 20 22 25,4 28 32 35 38 43 48 o o o o o o o o o o o mm 90 95 100 108 120 127 140 150 160 170 180 200 203 225 250 270 mm 300 320 330 356 380 400 460 10 13 16 19 22 25 27 30 32 35 38 43 54 80 Plate Soft annealed/Unmachined Width: 1500-1700 mm mm 4,2 6 8 The stock standard might change without notice Issue date July, 2014 2 (3) Uddeholm Sleipner Stock Standard Pre-machined Tolerances: Thickness: +0.4+0.65 mm Length: 1030 mm Width mm Width: +0.4/+0.80 mm Thickness, mm 4 6 8 10 12 15 16 20 25 30 32 40 50 60 63 80 20 25 30 32 40 50 60 63 70 80 100 125 150 160 175 200 250 300 315 350 400 Square The stock standard might change without notice Issue date July, 2014 3 (3)
© Copyright 2024 Paperzz