COMPONENTS

GUIDE TO
COMPONENTS
CONCRETE DISTRIBUTION SYSTEMS
valme.it
1 STANDARD
COLLARS COUPLINGS
CONCRETE DISTRIBUTION SYSTEMS
The plane couplings are the most used for the coupling of pipes or elbows, thank to easy assembly;
They are available in various models as following.
COLLARs sp
DN
D
DENOMINATION
DN
D
SP20
50
60
SP25
50
73
SP30
75
89
SP34
75
97
SP40
100
115
SP45
100
126
SP50
125
139,7
SP51
112
139
SP55
125
148
SP56
112
148
SP60
150
169
SP65
150
178
SP70
175
200
DN
D
FIXED COUPLINGS LEVER
CODE
PRESSURE
MATERIAL
0.95 Kg
85 bar
S355
Couplings 2.5"
1.5 Kg
85 bar
S355
Couplings 3"
2.2 Kg
85 bar
S355
Couplings 3" + Grease nipples
2.2 Kg
85 bar
S355
FC25
FC30
FC34
DN
WEIGHT
Couplings 2"
FC30G
D
DESCRIPTION
FC20
Couplings 3-1/4"
3.5 Kg
85 bar
S355
FC34G
Couplings 3-1/4" + Grease nipples
3.5 Kg
85bar
S355
FC30P
Couplings 3-1/4" + Mounting Plate
4.3 Kg
85 bar
S355
FC45
Couplings 4.5"
4.2 Kg
85 bar
S355
FC45G
Couplings 4.5" + Grease nipples
4.2 Kg
85 bar
S355
FC45P
Couplings 4.5" + Mounting Plate
5 Kg
85 bar
S355
FC45PG
5 Kg
85 bar
S355
FC50
Couplings 4.5" + Mounting Plate + Grease nipples
Couplings 5"
4.4 Kg
85bar
S355
FC55
Couplings 5.5"
4.5 Kg
85 bar
S355
FC55I
Couplings 5.5" + Grease nipples
4.5 Kg
85 bar
S355
FC55P
Couplings 5.5" + Mounting Plate
5.3 Kg
85 bar
S355
Couplings 5.5" + Mounting Plate + Grease nipples
5.3 Kg
85 bar
S355
FC55PG
F=FIXED
A=ADJUSTABLE
B=BOLTS
C=CouPliNGs
G=GRease NiPPles
P=MouNtiNG Plate
H=hiGh PRESSURE
F=FIX
A=ADJUSTABLE
B=BOLTS
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
C=CLAMP
G=GREASER
P=PLATE
H=HIGH PRESSURE
CONCRETE DISTRIBUTION SYSTEMS
ADJUSTABLE COUPLINGS LEVER
CODE
DESCRIPTION
WEIGHT
PRESSURE
MATERIAL
AC40
Couplings 4"
4.5 Kg
85 bar
S355
AC40P
Couplings 4" + Mounting Plate
5.3 Kg
85 bar
S355
AC45
Couplings 4.5"
4.9 Kg
85 bar
S355
AC50
Couplings 5"
5 Kg
85 bar
S355
Couplings 5" + Grease
5 Kg
85 bar
S355
AC50G
Couplings 5.5"
5Kg
85 bar
S355
AC55G
AC55
Couplings 5.5" + Grease nipples
5 Kg
85 bar
S355
AC55P
Couplings 5.5" + Mounting Plate
5.8 Kg
85 bar
S355
WEIGHT
PRESSURE
MATERIAL
3 Kg
85 bar
S355
ADJUSTABLE TWO-BOLT COUPLINGS
CODE
DESCRIPTION
ACB40
Couplings 4"
ACB45
Couplings 4.5"
4.3 Kg
85 bar
S355
ACB45G
Couplings 4.5" + Grease nipples
4.3 Kg
85 bar
S355
ACB45PG
Couplings 4.5" + Mounting Plate + Grease nipples
5.1 Kg
85 bar
S355
ACB50
Couplings 5"
4.4 Kg
85 bar
S355
ACB55
Couplings 5.5"
4.5 Kg
85 bar
S355
ACB55G
Couplings 5.5" + Grease nipples
4.5 Kg
85 bar
S355
ACB55P
Couplings 5.5" + Mounting Plate
5.3 Kg
85 bar
S355
Couplings 5.5" + Mounting Plate + Grease nipples
5.3 Kg
85 bar
S355
ACB55PG
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
1 STANDARD
COLLARS COUPLINGS
CONCRETE DISTRIBUTION SYSTEMS
TWO-BOLT COUPLINGS 85 bar
WEIGHT
PRESSURE
MATERIAL
SCREW
(UNI 5931)
Couplings 4.5"
3.75 Kg
85 Bar
S355
VITI TCEI M12
Couplings 4.5" + Grease nipples
3.75 Kg
85 Bar
S355
VITI TCEI M12
BC55
Couplings 5.5"
5.15 Kg
85 Bar
S355
VITI TCEI M14
BC55P
Couplings 5.5" + Mounting Plate
6 Kg
85 Bar
S355
VITI TCEI M14
CODE
BC45
BC45G
DESCRIPTION
ALUMINIUM NO-ADJUSTABLE COUPLINGS LEVER
CODE
DESCRIPTION
WEIGHT
PRESSURE
MATERIAL
FC45ALL
Couplings 4.5" aluminium
no-adjustable couplings lever
1.9 Kg
85 Bar
Aluminium
FC55ALL
Couplings 5.5" aluminium
no-adjustable couplings lever
2.35 Kg
85 Bar
Aluminium
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
GASKETS GU
CODE
DESCRIPTION
GU20
Gaskets 2" gu20
GU25
Gaskets 2.5" gu25
GU30
Gaskets 3" gu30
GU34
Gaskets 3"1/4 gu34
GU40
Gaskets 4" gu40
GU45
Gaskets 4.5" gu45
GU50
Gaskets 5" gu50
GU55
Gaskets 5.5" gu55
GU60
Gaskets 6.5" gu65
GU65
Gaskets 6" gu60
GU70
Gaskets 7" gu70
GU80
Gaskets 8" gu80
Gaskets GUV
CODE
DESCRIPTION
GUV45
Gaskets 4.5" Guv45
GUV55
Gaskets 5.5" Guv55
Gaskets GUTL
CODE
DESCRIPTION
GUTL45
Gaskets 4.5" GUTL45
GUTL55
Gaskets 5.5" GUTL55
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
2 CONICAL
COLLARS COUPLING
CONCRETE DISTRIBUTION SYSTEMS
DN
D
DN
D
In the conic coupling the external gaskets by inner gasket is replaced in a dedicated quarry. The effort to which are subject
is better distributed on throughout the contact surface of tapered sides. Tightening this coupling is more difficult for the
small tollerance. Thanks to this coupling the working pressure is 130 bar.
COLLARs CZ
COLLARs CP
CZ50M
CP50F
CP50M
DN
DN
D
D
CZ50F
DENOMINATION
DN
D
DENOMINATION
DN
D
CZ40
100
146
CP40 (small)
100
132
CZ50
125
168
CP50 (small)
125
158
CZ60-5
125
199
CP50
125
168
CP60
150
199
D
150
199
150
203
CZ70-6
150
227
CZ70
175
227
DENOMINATION
DN
D
DENOMINATION
DN
S50 Collar 5Z Schwing
125
164,8
P50 Collar 5Z PUTZMEISTER
125
175
S60 Collar 6Z Schwing
150
194,8
P60 Collar 6Z PUTZMEISTER
150
205
DN
D
CZ60
CZ6P
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
COUPLINGS 130 bar
CODE
DESCRIPTION
WEIGHT
PRESSURE
MATERIAL
2.3 Kg
130 bar
S355
FC3Z
No-adjustable couplings lever 3Z
ACB4Z.PICC
Cadjustable two-bolt couplings 4Z
4.1 Kg
130 bar
S355
FC5Z.PICC
No-adjustable couplings 5Z (small)
4.5 Kg
130 bar
S355
Adjustable two-bolt couplings 5Z
4.5 Kg
130 bar
S355
Two-bolt couplings 5Z
4.8 Kg
130 bar
S355
ACB5Z.PICC
BC5Z
ACB5Z
Adjustable two-bolt couplings 5Z
4.8 Kg
130 bar
S355
AC5Z
Adjustable couplings lever 5Z
4.8 Kg
130 bar
S355
AC5ZP
Adjustable couplings lever 5Z + Mounting Plate
5.7 Kg
130 bar
S355
AC6Z
Adjustable couplings lever 6Z
6.9 Kg
130 bar
S355
AC7Z
Adjustable couplings lever 7Z
7.2 Kg
130 bar
S355
High pressure adjustable two-bolt couplings
5.5 Kg
150 bar
S355
BC5ZH
Gaskets OR
CODE
DESCRIPTION
OR40
Gaskets 4z or
OR50
Gaskets 5z or
OR60
Gaskets 6z or
OR70
Gaskets 7z or
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
SCREW
(UNI 5931)
screw TCEI M14
screw TCEI M18
3 COUPLING PLATE -
INFORMATIONS
CONCRETE DISTRIBUTION SYSTEMS
This plate is welding to coupling, see the picture. In this case the coupling has 2 functions:
To connect 2 pipes/elbows and to support these on the boom.
Mounting Plate
CODE
Mounting Plate.G.G
DESCRIPTION
MATERIAL
Supporting plate
S355
Grease Nipples
CODE
INGR001
DESCRIPTION
Grease nipples m10x1
All couplings are available with greasing system.
SAFETY PINS
CODE
DESCRIPTION
SPINA001
Safety pins D.6.5x70
SPINA002
Safety pins D.8x75
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
4 STANDARD PIPES
CONCRETE DISTRIBUTION SYSTEMS
STANDARD ELBOWS
thickness
INTER-AXIAL
DISTANCE
PRESSURE
collars
Elbow S355
6 mm
180
85 bar
L=40 SP-CZ-CP-S-P
100-125
Elbow S355
6 mm
225
85 bar
AVAILABLE
100-125
Elbow S355
6 mm
275
85 bar
AVAILABLE
100
Elbow S355
6 mm
285
85 bar
AVAILABLE
125
Elbow S355
6 mm
315
85 bar
AVAILABLE
100-125
Elbow S355 Tempeted
6 mm
180
85/130 bar
AVAILABLE
100-125
Elbow S355 Tempeted
6 mm
225
85/130 bar
AVAILABLE
100-125
Elbow S355 Tempeted
6 mm
275
85/130 bar
AVAILABLE
100
Elbow S355 Tempeted
6 mm
285
85/130 bar
AVAILABLE
125
Elbow S355 Tempeted
DN (mm)
100-125
!"
DESCRIPTION
6 mm
315
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn
Sp MAX 13
180
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn
Sp MAX 13
225
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn
Sp MAX 13
275
85/130 bar
AVAILABLE
100
Cast Elbow Mn
Sp MAX 13
285
85/130 bar
AVAILABLE
125
Cast Elbow Mn
Sp MAX 13
315
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn Cr
Sp MAX 13
180
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn Cr
Sp MAX 13
225
85/130 bar
AVAILABLE
100-125
Cast Elbow Mn Cr
Sp MAX 13
275
85/130 bar
AVAILABLE
100
Cast Elbow Mn Cr
Sp MAX 13
285
85/130 bar
AVAILABLE
125
Cast Elbow Mn Cr
Sp MAX 13
315
85/130 bar
AVAILABLE
100
Cast Elbow Cr
Sp MAX 9
180
85 bar
AVAILABLE
100
Cast Elbow Cr
Sp MAX 9
275
85 bar
AVAILABLE
100
Cast Elbow Cr
Sp MAX 9
285
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 8
180
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 10
225
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 7
275
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 8
275
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 10
275
85 bar
AVAILABLE
125
Cast Drop Stop Elbow Cr
Sp MAX 12
275
85 bar
AVAILABLE
125
Cast Elbow Cr
Sp MAX 8
1000
85 bar
AVAILABLE
150
Cast Elbow Cr
Sp MAX 12
275
85 bar
AVAILABLE
150
Cast Elbow Cr
Sp MAX 12
425
85 bar
AVAILABLE
Chrome cast elbows have external cover with of 4mm in S355 thickness.
The interaxial distance can be modified, in this case the radius will not change.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
4 STANDARD PIPES
CONCRETE DISTRIBUTION SYSTEMS
RAW REDUCTIONS
Dmax-Dmin
Lmin
Lmax
D 50-75
400
500
D 75-100
400
1000
D 100-112
1300
1700
D100-125
300
3000
D 112-125
1400
1600
D 125-132
500
700
D125-150
400
2000
D 132-150
500
700
D 150-175
600
1400
Coustom lenghts available on request.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
5 REDUCTIONS
CONCRETE DISTRIBUTION SYSTEMS
REDUCTIONS standard
PiPe S355.
COLLAR S355.
DN
(mm/in)
DESCRIPTION
Sp (mm)
PRESSURE
100/4_75/3
Reductions STD SP45/SP34 L=1000
7
85/130 bar
125/5_100/4
Reductions STD SP55/SP45 L=1000
7
85/130 bar
125/5_100/4
Reductions STD SP55/SP45 L=1500
7
85/130 bar
125/5_100/4
Reductions STD SP55/SP45 L=3000
7
85/130 bar
125/5_100/4
Reductions STD SP55/SP45 L=980
7
85/130 bar
125/5_75/3
Reductions STD CZ50F/SP34 L=1009
7
85/130 bar
150/6_125/5
Reductions STD CZ60F/SP55 L=1000
7
85/130 bar
150/6_125/5
Reductions STD CZ60F/SP55 L=1070
7
85/130 bar
150/6_125/5
Reductions STD CZ60F/SP55 L=1287
7
85/130 bar
150/6_125/5
Reductions STD CZ60F/CZ50M L=2000
7
85/130 bar
175/7_125/5
Reductions STD CZ70F/CZ50M L=2000
7
85/130 bar
Coustom lenghts available on request.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
REDUCTIONS TMP
PIPE IN haRdeNed STEEL - 54HRC.
COLLAR WITH haRdeNed INSERT – 63 HRC.
DN
(mm/in)
DESCRIPTION
Sp (mm)
PRESSURE
125/5_100/4
Reductions TMP SP55/SP45 L=1000
7
85/130 bar
125/5_100/4
Reductions TMP SP55/SP45 L=1200
7
85/130 bar
125/5_100/4
Reductions TMP SP55/SP45 L=1500
7
85/130 bar
125/5_100/4
Reductions TMP SP55/SP45 L=1900
7
85/130 bar
125/5_100/4
Reductions TMP SP55/SP45 L=3000
7
85/130 bar
150/6_125/5
Reductions TMP CZ60F/SP55 L=1287
7
85/130 bar
150/6_125/5
Reductions TMP CZ60F/SP55 L=1070
7
85/130 bar
150/6_125/5
Reductions TMP CP60F/SP55 L=1070
7
85/130 bar
Coustom lenghts available on request.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
REDUCTIONS lln
INTERNAL PIPE IN haRdeNed STEEL - 65HRC.
ESTERNAL PIPE IN STEEL S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
DESCRIPTION
Sp-i (mm)
Sp-e (mm)
PRESSURE
125/5_100/4
Reductions LLN SP55/SP45 L=1000
7
4
85/130 bar
125/5_100/4
Reductions LLN SP55/SP45 L=1200
7
4
85/130 bar
125/5_100/4
Reductions LLN SP55/SP45 L=1500
7
4
85/130 bar
125/5_100/4
Reductions LLN SP55/SP45 L=1900
7
4
85/130 bar
125/5_100/4
Reductions LLN SP55/SP45 L=3000
7
4
85/130 bar
150/6_125/5
Reductions LLN CZ60F/SP55 L=1000
7
4
85/130 bar
150/6_125/5
Reductions LLN CZ60F/SP55 L=1070
7
4
85/130 bar
150/6_125/5
Reductions LLN CZ60F/SP55 L=1287
7
4
85/130 bar
175/7_125/5
Reductions LLN CZ70F/SP55 L=1070
7
4
85/130 bar
Coustom lenghts available on request.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
REDUCTIONS LLH
WEAR INTERNAL PIPE MADE OF CHROME CARBIDE.
ESTERNAL PIPE S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
DESCRIPTION
Sp-i (mm)
Sp-e (mm)
PRESSURE
125/5_100/4
Reductions LLH SP55/SP45 L=1200
10
4
85/130 bar
125/5_100/4
Reductions LLH SP55/SP45 L=1500
10
4
85/130 bar
125/5_100/4
Reductions LLH SP55/SP45 L=3000
10
4
85/130 bar
150/6_125/5
Reductions LLH SP65/SP55 L=1200
10
4
85/130 bar
150/6_125/5
Reductions LLH CZ60F/CP50M L=1000
10
4
85/130 bar
150/6_125/5
Reductions LLH CZ60F/CP50M L=1070
10
4
85/130 bar
150/6_125/5
Reductions LLH CZ60F/SP55 L=1200
10
4
85/130 bar
150/6_125/5
Reductions LLH CZ60F/CP50M L=1287
10
4
85/130 bar
The reductions llh have the external pipe with of 4mm thickness.
Coustom lenghts available on request.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
CONCRETE RUBBER HOSES
CONCRETE RUBBER HOSE, 4 WIRES REINFORCEMENT, PRESSURE 80 bar WORKING.
CODE
DESCRIPTION
WORKING PRESSURE (bar) BURST PRESSURE (bar) WEIGHT
length
226090
DN=76 2x3"1/4
85 bar
200 bar
5.5 kg/m
2800
236757
DN=76 2x3"1/4
85 bar
200 bar
5.5 kg/m
3100
S1010801
DN=76 2x3"1/4
85 bar
200 bar
5.5 kg/m
6100
226717
DN=76 2x3"1/4
85 bar
200 bar
5.5 kg/m
10000
232118
DN=102 2x4"
85 bar
200 bar
7.7 kg/m
3000
232119
DN=102 2x4"
85 bar
200 bar
7.7 kg/m
4000
232120
DN=102 2x4"
85 bar
200 bar
7.7 kg/m
5000
494226
DN=102 2x4"
85 bar
200 bar
7.7 kg/m
6000
232121
DN=102 2x4"1/2
85 bar
200 bar
7.7 kg/m
3000
232122
DN=102 2x4"1/2
85 bar
200 bar
7.7 kg/m
4000
232123
DN=102 2x4"1/2
85 bar
200 bar
7.7 kg/m
5000
494798
DN=102 2x4"1/2
85 bar
200 bar
7.7 kg/m
6000
232124
DN=127 2x5"
85 bar
200 bar
9.5 kg/m
3000
232125
DN=127 2x5"
85 bar
200 bar
9.5 kg/m
4000
232126
DN=127 2x5"
85 bar
200 bar
9.5 kg/m
5000
232127
DN=127 2x5"1/2
85 bar
200 bar
9.5 kg/m
3000
232128
DN=127 2x5"1/2
85 bar
200 bar
9.5 kg/m
4000
232129
DN=127 2x5"1/2
85 bar
200 bar
9.5 kg/m
5000
229830
DN=127 2x5"1/2
85 bar
200 bar
9.5 kg/m
6000
On request are available: different options of hose ends, hoses with only one end, end with spring.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
SHUT OFF VALVE
DN (mm)
DESCRIPTION
L
(mm)
WORKING
PRESSURE
BURST
PRESSURE
WEIGHT
air
CONNECTION Ø
SHUT45
SHUT OFF 4.5"
600
85
200
18
3/8" GAS
SHUT55
SHUT OFF 5.5"
600
85
200
22.9
3/8" GAS
SHUT45CPL
CODE KIT 4.5
SHUT55CPL
CODE KIT 5.5
SHUT-OFF VALVE is available in two version: only the valve; full kit (VALVE, CONTROLLER, NIPPLES,
HOSES).
On request it is possible any customizing.
KIT DESCRIPTION
• SHUT OFF VALVE
•ELECTRONIC UNIT
• WIRINGs
•INsTRUCTION INsTALLATION
•UsE AND sPARE PARTs MANUAL
When the command shut-off valve is “off” it is open. When the command shut-off valve is ”oN” the valve
is closed, it is opened by the command pump start .
AIR LINE
FAST
DESCARDE
AIR VALVE
“PUMP COMMAND”
ON - SHUT-OFF OPEN
“PUMP COMMAND”
OFF - SHUT-OFF CLOSED
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
2 WAY DEVIATION VALVES
CODE
DESCRIPTION
PRESSURE
WEIGHT
DN
DEV55S
Deviation valve 5.5” – Low pressure
85 bar
70 Kg
125
2 WAY LONG LIFE DEVIATION VALVE
CODE
DESCRIPTION
PRESSURE
WEIGHT
DN
DEV55H
Deviation valve 5z – high pressure
130 bar
102 Kg
125
DEV5ZH
Deviation valve 5.5 – Low pressure
85 bar
102 Kg
125
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
HYDRAULIC SHUT-OFF VALVES
PRESSURE
WEIGHT
DN
GH55AUTO
CODE
SHUT-OFF Valve 5Z
DESCRIPTION
130 bar
180 Kg
125
GH5ZAUTO
SHUT-OFF Valve 5.5
85 bar
180 Kg
125
PRESSURE
WEIGHT
DN
STANDARD: control driven hydraulically by manual pump.
OPTIONAL: control driven hydraulically by suction box.
SHUT-OFF VALVES
CODE
DESCRIPTION
GH30MAN
SHUT-OFF Valve 3"
30 bar
20 Kg
75
GH34MAN
SHUT-OFF Valve 3"1/4
30 bar
20 Kg
75
GH45MAN
SHUT-OFF Valve 4.5"
30 bar
20 Kg
100
GH5ZMAN
SHUT-OFF Valve 5Z
30 bar
20 Kg
125
GH60MAN
SHUT-OFF Valve 6"
30 bar
20 Kg
150
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PIPE SUPPORTS
WEIGHT
MATERIAL
SUPP40
CODE
Claw support – 4” (D108-114)
DESCRIPTION
1.0 Kg
S355
SUPP50
Claw support – 5” (D133-139)
1.9 Kg
S355
DENOMINATION
i
d
c
h
l
Support 5”
154
14,5
83
158
263
Support 4”
128
14,5
68
133
250
“U” CLAMPING
CODE
DESCRIPTION
PRESSURE
DN
CAV40
“U” clamping – 4”
0,4 Kg
S355
SELLA40
Plastic support – 4”
0,4 Kg
Plastic
CAV50
“U” clamping – 5"
0,5 Kg
S355
SELLA50
Plastic support – 5"
0,5 Kg
Plastic
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
STOP BALL DEVICES
CODE
DESCRIPTION
WEIGHT
STOP45
Stop ball device – 4.5”
3.9 Kg
STOP55
Stop ball device – 5.5"
4.4 Kg
SPONGE BALLS
CODE
DESCRIPTION
S30L
Sponge ball D.100 - 3” – Soft
150 Kg/m³
S40L
Sponge ball D.125 - 4" - Soft
150 Kg/m³
S50L
Sponge ball D.150 - 5" - Soft
150 Kg/m³
S60L
Sponge ball D.175 - 6" - Soft
150 Kg/m³
S70L
Sponge ball D.200 - 7" - Soft
150 Kg/m³
CODE
DESCRIPTION
density
S40M
Sponge ball D.125 - 4" – Medium
200 Kg/m³
S50M
Sponge ball D.150 - 5" - Medium
200 Kg/m³
S60M
Sponge ball D.175 - 6" - Medium
200 Kg/m³
CODE
SPONGE ROLLERS
density
DESCRIPTION
density
S40H
Sponge ball D.125 - 4" – Hard
300 Kg/m³
S50H
Sponge ball D.150 - 5" - Hard
300 Kg/m³
S60H
Sponge ball D.175 - 6" - Hard
300 Kg/m³
S= SPONGE
L=LIGHT
CODE
M=MEDIUM
H=HARD
DESCRIPTION
density
S120-150M
Sponge roller D. 120 LG. 150
200 Kg/m³
S125-150M
Sponge roller D. 125 LG. 150
200 Kg/m³
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PUTZMEISTER - TRUCK PUMPS KIT
PZ0004
PZ0004A
PZ0003
PZ0003A
PZ0002A
PZ0002
PZ0001
CODE
DESCRIPTION
PZ0001
Elbow dn 180-150
PZ0002
Elbow dn 150 90° P60m-P60f
PZ0002A
Elbow dn 150 90° P60m-sp65
PZ0003
Reductions dn 150-125 l1200mm p60m-sp55)
PZ0003A
Reductions dn 150-125 l1200mm sp65-sp55)
PZ0004
Elbow dn 125 45°
PZ0004A
Elbow dn 125 45°
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
SCHWING - TRUCK PUMPS KIT
SW0004
SW0003
SW0002A
SW00000
SW0002B
SW0002
SW0001
CODE
DESCRIPTION
CODE
DESCRIPTION
SW0000
Elbow DN 180 14°
SW0000A
Pipe DN 150 S60F-S60M
SW0001
Elbow DN 180-150
SW0001A
Elbow DN 180-150
SW0002
Elbow DN 150 90° long
SW0002A
Elbow DN 150 90°
SW0002A
Elbow DN 150 90°
SW0003A
Reductions DN 150-125 L1500mm
SW0002B
Elbow DN 150 90° short
SW0003
Reductions DN 150-125 L1600mm
SW0004
Elbow DN 125 45°
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PIPES – LLN SERIES
INTERNAL PIPE MADE OF C60 haRdeNed STEEL – 65 HRC.
esteRNal PiPe S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
De (mm)
Sp-i
(mm)
Sp-e
(mm)
PRESSURE
Kg/m
Kg/m
concrete
100/4
108
2.7
2
85 bar
12.1
18.5
112/4.5
121
2.7
2
85 bar
13.6
23.7
125/5
133
2.7
2
85 bar
15.1
29.0
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PIPES – LLS SERIES
INTERNAL PIPE MADE OF C60 haRdeNed STEEL – 65 HRC.
ESTERNAL PIPE S355.
EXTENDED COLLAR WITH CHROME CARBIDE CASTING-INSERT, ACCESS SIDE OF THE CONCRETE (L=100mm).
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
De (mm)
Sp
(mm)
Sp-e
(mm)
PRESSURE
Kg/m
100/4
108
2.7
2
85 bar
12.1
18.5
125/5
133
2.7
2
85 bar
15.1
29.0
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
Kg/m
concrete
CONCRETE DISTRIBUTION SYSTEMS
PIPES – STANDARD SERIES
PiPe S355.
COLLAR S355.
DN
(mm/in)
De (mm)
75/3
82.5
4
75/3
88.9
6.3
Sp (mm)
Kg/m
Kg/m
concrete
85 bar
7.8
10.5
85/130 bar
12.9
11.0
PRESSURE
75/3
88.9
8
85/130 bar
16.0
10.0
100/4
108
4
85 bar
10.3
18.9
100/4
114.3
6.3
85/130 bar
16.8
19.5
112/4.5
121
4
85 bar
11.6
24.1
112/4.5
127
6.3
85/130 bar
18.6
24.7
125/5
133
4
85 bar
12.8
29.5
125/5
139.7
6.3
85/130 bar
20.7
30.5
125/5
139.7
8
150 bar
26.0
28.9
150/6
159
4.5
85 bar
17.2
42.5
150/6
168.3
8
150 bar
31.7
43.8
175/7
193.7
6.3
85/130 bar
29.1
61.9
85 bar work pressure needs “SP” collars.
130 and 150 bar work pressures need “CZ” or “CP” collars.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PIPES – LLH SERIES
INTERNAL PIPE IN C60 haRdeNed STEEL – 65 HRC.
ESTERNAL PIPE S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
CHROME CARBIDE INSERT-COLLAR EXTENSION.
DN
(mm/in)
.
De (mm)
Sp
(mm)
Sp-e
(mm)
PRESSURE
100/4
114.3
5.6
2.7
85 bar
21.7
18.0
125/5
139.7
5.6
2.7
85 bar
25.7
28.6
150/6
168.3
5.0
4.0
85 bar
35.4
42.6
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
Kg/m
Kg/m
concrete
CONCRETE DISTRIBUTION SYSTEMS
TUBI LLHC
WEAR INTERNAL PIPE IS ON CHROME CARBIDE.
ESTERNAL PIPE IN S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
De (mm)
Sp-i (mm)
Sp-e (mm)
PRESSURE
Kg/m
Kg/m
concrete
100/4
114.3
5
2.7
85 bar
20.2
18.4
125/5
139.7
5
2.7
85 bar
25.1
29.1
In cheap solution the collar can be installed on the external side of the pipe.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PIPES – HARDENED SERIES
PIPE IN haRdeNed STEEL - 54 HRC.
COLLAR WITH haRdeNed INSERT – 63 HRC.
DN
(mm/in)
De (mm)
Sp (mm)
PRESSURE
Kg/m
Kg/m
concrete
75/3
82.5
4
85 bar
7.8
10.5
100/4
108
4
85 bar
10.3
18.9
100/4
114.3
6.3
85/130 bar
16.8
19.5
112/4.5
121
4
85 bar
11.6
24.1
112/4.5
127
6.3
85/130 bar
18.6
24.7
125/5
133
4
85 bar
12.8
29.5
125/5
139.7
6.3
85/130 bar
20.7
30.5
In cheap solution the collar can be installed on the external side of the pipe.
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
ELBOWS – Fe SERIES
ELBOW IN S355.
COLLAR IN S355.
DN
(mm/in)
Sp (mm)
PRESSURE
INTER-AXIAL
DISTANCE (mm)
75/3
6
85
150
100/4
6
85/130 bar
180
100/4
6
85/130 bar
225
100/4
6
85/130 bar
275
100/4
6
85/130 bar
285
100/4
7.1
85/130 bar
1000
125/5
6
85/130 bar
180
125/5
6
85/130 bar
225
125/5
6
85/130 bar
275
125/5
6
85/130 bar
315
125/5
6.3
85/130 bar
1000
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
CAST ELBOWS
ALL THE ELBOW IS ONE SINGLE.
MANGANESE CAST.
DN
(mm/in)
INTER-AXIAL
DISTANCE (mm)
Sp (mm)
PRESSURE
100/4
13
85/130 bar
180
100/4
13
85/130 bar
225
100/4
13
85/130 bar
275
100/4
13
85/130 bar
285
125/5
13
85/130 bar
180
125/5
13
85/130 bar
225
125/5
13
85/130 bar
275
125/5
13
85/130 bar
315
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
ELBOWS – HARDENED SERIES
ALL THE ELBOW IS ONE SINGLE CHROME/MANGANESE CAST.
INTER-AXIAL
DISTANCE (mm)
DN
(mm/in)
Sp (mm)
75/3
10
85 bar
150
100/4
13
85/130 bar
180
PRESSURE
100/4
13
85/130 bar
225
100/4
13
85/130 bar
275
100/4
13
85/130 bar
285
112/4.5
13
85/130 bar
180
112/4.5
13
85/130 bar
275
125/5
13
85/130 bar
180
125/5
13
85/130 bar
225
125/5
13
85/130 bar
275
125/5
13
85/130 bar
315
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
ELBOWS – LLN SERIES
ALL THE ELBOW IS ONE SINGLE CHROME/MANGANESE CAST.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
INTER-AXIAL
DISTANCE (mm)
Sp (mm)
PRESSURE
100/4
13
85/130 bar
180
100/4
13
85/130 bar
225
100/4
13
85/130 bar
275
100/4
13
85/130 bar
285
125/5
13
85/130 bar
180
125/5
13
85/130 bar
225
125/5
13
85/130 bar
275
125/5
13
85/130 bar
315
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
CURVe SERIE LLH
INTERNAL ELBOW IS IN CROME IRON CAST.
EXTERNAL ELBOWS IN S355.
COLLAR WITH CHROME CARBIDE CASTING-INSERT.
DN
(mm/in)
Sp max-i(mm)
Sp-e (mm)
PRESSURE
100/4
9
2.5
85 bar
180
100/4
9
2.5
85 bar
275
100/4
9
2.5
85 bar
285
125/5
7
2.5
85 bar
275
125/5
8
2.5
85 bar
180
125/5
8
2.5
85 bar
275
125/5
8
2.5
85 bar
1000
125/5
10
2.5
85 bar
225
125/5
10
2.5
85 bar
275
125/5
12
2.5
85 bar
275
150/6
12
2.5
85 bar
275
150/6
12
2.5
85 bar
425
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
INTER-AXIAL
DISTANCE (mm)
CONCRETE DISTRIBUTION SYSTEMS
CIFA TRUCK PUMPS KIT
2ND BENDS AFTHER THE REDUCTION IS AVAILABLE WITH : 30° 35° 42° 45° 50° 55°
CODE
DESCRIPTION
S1030250
Elbow S8 DN 180-150
S1023245
Elbow S9 DN 180-150
S1015711
Elbow DN 150 90° CP60F-CZ60M
S1026125
Reductions LLH DN 150-125 L1287 CZ60F-SP55
S2003041
Elbow LLH DN 125 55° SP55-SP55
KITPALLA001
PZ0004A
Stopball pin – Washing botton - Gasket – Coupling
Elbow dn 125 45°
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
CIFA TRUCK BETONPUMPS KIT
* TAILOR MADE FOR
CODE
DESCRIPTION
236867
Elbow S6 DN 125-125
S1007092
Elbow S7 DN 150-125
S1035920
Pipe LLH DN 125 L815 CP50F-CP50M
S1035914
Elbow LLH DN 125 55° CP50F-SP55
S2002644
Pipe LLH DN 125 L1500* SP55-SP55
S1035924
Reductions LLH DN 125-100 L3000 SP55-SP45
S2006550
Reductions LLH DN 125-100 L1500 SP55-SP45
S1042214
Reductions LL DN 125-100 L1000 SP55-SP45
KITPALLA002
Stopball pin – Washing botton - Gasket – Coupling
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
PUTZMEISTER TRUCK BETONPUMPS KIT
PZ0105
PZ0104
PZ0102
PZ0101
PZ0103
CODE
DESCRIPTION
PZ0101
Elbow DN 150-125
PZ0102
Pipe LLH L.500 with Stop-ball
PZ0103
Elbow LLH DN 125 90°
PZ0104
Elbow LLH DN 125 30°
PZ0105
Reductions LLH DN 125-100 L.1900 mm
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
material
L
LONG LIFE
S
LONG LIFE SOFT
H
LONG LIFE HARD
A
STANDARD SP4
B
STANDARD SP7
C
STANDARD SP8
45
SP45
55
SP55
collar
5ZM
CZ50M
5ZF
CZ50F
5PM
CP50M
5PF
CP50F
component
R
Reductions
C
elbow
T
STRAIGHT PIPE
L
length
G
angle
I
beam
INFORMAtion
component
COLLAR
R
5545
INFORMAtion
MATERIAL
MATERIAL
L1000
S
R5545L1000S
R
6ZM5ZM
7
S
R6ZM5ZML1000S
C
55
G90R180
S
C55G90R180S
C
555PF
G90R180
S
C55G90I180S
C
7ZF6ZM
PUTZ
L
C
7ZF6ZM
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
CONCRETE DISTRIBUTION SYSTEMS
REFERENCES
The standard reference for dimensional and safety parameters quoted in this document is:
EN12001:2009
Conveying, spraying and placing machines for concrete and mortar – Safety Requirements
According with this norm all components are tested per resist to nominal pressure with a specific safety factor:
pipes, bends, joints and accessories: SAFETY FACTOR=2
rubber end hose: SAFETY FACTOR=1,75
TECHNICAL DATA
Every VALME product have a plate with product specific technical data.
En example of identification plate is shown below:
MAX OPERATIVE PRESSURE
NOMINAL DIAMETER
CONCRETE DISTRIBUTION SYSTEMS
WEIGHT FULL
OF CONCRETE
NET WEIGHT
DATE or PRODUCTION
BATCH N°
PART NUMBER
every VALME pipe is identified trought date of production or production batch number, impressed directly on the
identification plate or on the collar. This guaranty an immediate traceability of the product and a real-time quality
monitoring.
QUALITY
All the process linked to destructive and non destrucive test are made internally, for each production batch, as per
European norm.
CONTACTS
For any further informations,
[email protected]
VALME srl: Via Vittorio Veneto, 2tecnico
- [email protected]
ROGOLO (SO) Italy
please contact VALME at:
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it
www.grafocom.it
CONCRETE DISTRIBUTION SYSTEMS
VALME srl: Via Vittorio Veneto, 2 - 23010 ROGOLO (SO) Italy
Tel. +39 0342 684248 - Fax +39 0342 684467 - [email protected] - www.valme.it