close

Enter

Log in using OpenID

cryogenic pumps for marine and shipping applications

embedDownload
VANZETTI ENGINEERING
CRYOGENIC PUMPS FOR MARINE AND SHIPPING
APPLICATIONS
www.vanzettiengineering.com
Giancarlo Geninatti Crich
Sales Manager
2° Conference on LNG for Transport in Italy and the Mediterranean Area - Rome, April 10-11, 2014
CRYOGENIC PUMPS FOR MARINE AND SHIPPING
APPLICATIONS
It is globally recognized that LNG is the best solution for ship engines propulsion as it is cost
effective and the cleanest fuel immediately available.
This environmental awareness is urgent in many areas of the world, from the Mediterranean to
the Asian Pacific seas, further to what has already been achieved in order to protect Northern
Europe maritime areas.
Specifically to this industry, Vanzetti Engineering has developed cryogenic components and a
wide set of engineered systems required by the LNG supply chain:
Cryogenic Pumps for feeding LNG at Low Pressure to ship engines (ARTIKA series)
Cryogenic Pumps for Loading Stations, Bunkering, Cold Ironing
Cryogenic Pumps for LNG and LCNG refuelling to port land working vehicles
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
Thanks to the seal-less concept, ARTIKA pumps are suitable for Fuel Gas Systems
continuous feeding or as back-up solution. Moreover, the maintenance needs are
minimized.
Suitable for in-tank installation as well as in vacuum insulated cryotank.
Frequent start and stop are possible thanks to the fact the pump is always
submerged.
Available in three dimensions, 1, 2 or 4 stages.
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
ARTIKA 160-II
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
ARTIKA 200-IV
ARTIKA 230-II
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
AVAILABLE ACCESSORIES
Vacuum insulated Cryostat
With different sizes depending on submerged pump model, including safety valves, pressure
gauge, inlet an outlet manual valves, check valve, gas and liquid purge valves.
Electric connector with gas seal system
For connecting the electrical motor wires to the main electrical control panel (specifically
designed stainless steel connector with ceramic insulation and copper bars cable terminal strip).
Electric junction box
For easy wire / unwire the cable pipe coming from the main electrical panel.
Electric cable for extreme temperatures
In case of in-tank installation to connect the electric connector from the pump to the top of the
tank.
LNG CRYOGENIC CENTRIFUGAL SUBMERGED
PUMPS ARTIKA SERIES
EXAMPLE OF INSTALLATIONS
ARTIKA 230-II in
cryostat installation
(outside tank)
ARTIKA 160-II in-tank installation
LNG MARINE REFERENCES
Q.ty 1 ARTIKA 160-II for 28.000 m3 LNG Carrier DALIAN INTEH, China
Class Certifications BV, CCS
in-tank application - Wärtsilä engines
Q.ty 2 ARTIKA 160-II for 30.000 m3 LNG Carrier NINGBO XINLE, China
Class Certifications BV, CCS
in-tank application - Wärtsilä engines
Q.ty 2 ARTIKA 160-II for LNG powered vessels, Poland
Class Certifications DNV-GL
cryostat application (outside tank) - Rolls-Royce Marine engines
Q.ty 1 HP VT-55 reciprocating pump for MAN Copenhagen test bench
Q.ty 1 HP VT-1 reciprocating pump for SEWON (Samsung Heavy Industries) test bench in Korea
LNG HIGH PRESSURE PUMPS
VT-55/65 TW10
Available MONO to QUINTUPLEX
from 270 kg/min to 8.000 kg/min
COASTAL STORAGE / LOADING STATIONS
Cryogenic pump
engineered automatic
skids for LNG transfer for
coastal storage / loading
stations
Loading of bunkering
vessel (up to 350 m3/h)
Receiving of 3.000 tons
LNG barges
Thermal utilities for
BOG recovery
9.000 m3 storage
capacity, with cryogenic
tanks, 7/9 bar pressure
Loading of LNG semitrailers (up to 100 m3/h)
COASTAL STORAGE / LOADING STATIONS
AND BUNKERING ENGINEERED SKIDS SOLUTIONS
Cryogenic Centrifugal
Pumps Manual / Semi
Automatic Skids
Cryogenic
Centrifugal
Pumps fully
Automatic Skids
COLD IRONING
Eco-friendly systems
providing shore-side electrical
power ot ships at berth while
main and auxiliary engines
are turned off.
All ships not currently
equipped with NG propulsion
systems can be fed by NG to
receive electrical power while
at berth.
THANK YOU
FOR YOUR ATTENTION
CRYOGENIC PUMPS FOR MARINE AND SHIPPING
APPLICATIONS
www.vanzettiengineering.com
Giancarlo Geninatti Crich
Sales Manager
2° Conference on LNG for Transport in Italy and the Mediterranean Area - Rome, April 10-11, 2014
Author
Document
Category
Uncategorized
Views
0
File Size
1 406 KB
Tags
1/--pages
Report inappropriate content