close

Enter

Log in using OpenID

ADVANCED MATERIALS AND TECHNOLOGIES FOR

embedDownload
4th International Conference
ADVANCED MATERIALS AND TECHNOLOGIES
FOR TRANSPORT
Lightweight materials: sustainable solutions for the next
vehicles generation
27-28 February 2014
Aula Magna del Politecnico di Torino-Sede
Torino
Lingotto
Via Nizza 230
Torino (Italy)
ATA-Associazione
Associazione Tecnica dell’Automobile (the Italian Automotive Society), with the
cooperation of Fiat, is organising the 4th International Conference on ‘Advanced
‘
materials
and technologies for transport-Lightweight
Lightweight materials: sustainable solutions for the next
vehicles generation.
This Conference is intended to be an event where car-makers
car
needs, research developers
and materials/technology suppliers offers, are shared together to discuss the future of
materials in automotive, also including cross fertilization with other transport sectors.
The issue of reducing fuel consumption and CO2 emissions is probably the most important
challenge for automotive research over the coming years. Hence, car makers have to face
the reduction of vehicle structural weight through the deployment of new materials in many
sub-systems
systems and components and on the optimization of the structural layout, including
complementary ways of achieving weight reduction through holistic, multi-functional
multi
design
and numerical simulation, considering the potential for the standardization of the materials
and the respective process technologies.
In this context, further medium-term
term research is required to accelerate the development
and applications of advanced lightweight materials and the respective production processes
in order to enable rapid introduction, while ensuring sustainability and viability by rapidly
achieving the appropriate economies of scale.
The analysis of the trade-off
off between the extra cost of lightweight design and the possible
gains from lower life-time
time costs for energy consumption and emissions is really important
and strategic.
Accordingly, innovation in materials engineering will play a central role in light weighting
strategies. In particular, significant evolution is expected over the coming years, as regards:
• steels offering improved performance
• aluminum and hybrid-integrated light alloys
• advanced plastics and composites
• new methodologies to predict long term behavior of novel materials and
multi-material solutions.
Likely, no particular class of materials will prevail but, after technical and economic matters
are solved, each different material will be used to exploit its potential in multi-materials
multi
solutions.
The Conference is chaired by
Rosanna Serra (Fiat-Chrysler)
(Fiat
Sponsored by:
27 February 2014
8:30 Participants’ Registration
9:30 Welcome addresses: N. Di Giusto – ATA President
R. Serra – Head of Group Materials Labs - Fiat-Chrysler
9:40
Key-note
note on ‘Automotive Lightweighting Materials: current trends and future scenarios’
presented by P. Martino - Frost & Sullivan
10:10 Session 1: Lightweight overview
E. Pisino – Fiat-Chrysler
Vehicle weight reduction: sustainable and affordable technology for achieving CO2 emissions
target
J. W. Meschke – Volkswagen
ALIVE Project: Advanced high volume affordable lightweighting for future electric vehicles
11:00 – 11.30 Coffee Break
A. Giubellini - Dallara
From racing to automotive: advantages of composite materials
D. Ferrario – Streparava
Lightweight Design - Every Gram Counts
M. Carello - Politecnico di Torino
XAM 2.0: a E-REV
REV city vehicle made of aluminum and composite materials
13:00
Lunch
14:30 Session 2: Metals & Alloys
Ph. Antoine - ArcelorMittal
Global approach and related examples for weight savings on modules
Y. Zhong – Baosteel
AHSS (Advanced High-Strength Steels) in Baosteel
S. Köllerer - Voestalpine
High ductility AHSS: a new trend to match lightweight
15:45 – 16:15
Coffee Break
H. Ribes - Constellium
Constellium aluminum development to supply all automotive OEM’s
M. Padovani, M. Brandt - Wisco Tailored Blank
Tailored Solutions in Lightweight design
L. De Prada Martin - Cidaut
New processes for Aluminium Castings
A. Igartua – IK4-Tekniker
Plasma electroxidation of light alloys to enhance wear and corrosion resistance of automotive
components
Congress dinner
28 February 2014
9:00 Key-note
note on ‘EVolution Project: the electric vehicle enabled by advanced materials highly
hybridized into lightweight components’
presented by E. Cischino – Pininfarina and D. Pullini – Centro Ricerche Fiat
9:30 Session 3 – Plastics, Composites and Multimaterials
I. Verpoest - Katholieke Universiteit Leuven
project: two new material concepts for high volume, structural composite parts
The HIVOCOMP-project:
for road transport applications
U. Fresia - Sabic Innovative Plastics
Losing weight looks great
R. Lenferink – TenCate Advanced Composites
TenCate Thermoplastic Composite Materials and Applications in Automotive
10:50 – 11:15
Coffee Break
P. Dassi – Gurit
Composite solutions in mass transport and performance vehicles
L. Mondino - Adler Group
Production of a carbon fibre monocoque with a volume of 20 parts a day: technologies, process
development, quality assurance
G. Belingardi – Politecnico di Torino, B. Martorana – Centro Ricerche Fiat
Recent experiences in composite and adhesive for vehicular applications
A. Lutz, S. Schmatloch – Dow Chemical
Structural Adhesives for Automotive light weight constructions
13:00
Lunch
14:00 Session 4 - Material know-how
how for reliable design
M. Sperati - Altair
Altair material vision in CAE: leading edge solution for complex materials
V. Capitani – Bytest
Non Destructive Testing on composites
M. Lattere - MSC Software presentation
A. Romeo – Proplast
From Process to Application: Morphological Characterisation of Polymers for Accurate FEM
Analysis
16:30
Final Remarks
Contacts:
For technical – scientific enquiries:
Andrea Pipino (Centro Ricerche Fiat)
[email protected]
Phone: +39.011.9083350
For organisational enquiries:
Marisa Giunipero
ATA – Strada Torino 32/A - 10043 Orbassano (Italy)
[email protected]
Phone: +39.011.9080405
www.ata.it
Venue
The Conference will take place at: Aula Magna del Politecnico di Torino, Sede Lingotto Via Nizza 230 – Torino (Italy)
How to reach the Conference venue
By plane: from Torino Caselle Airport, it takes about 30 minutes (by car) to Lingotto.
By train + underground: from Torino Porta Nuova or Porta Susa railway Stations (both in
Torino Centre) you can take the underground (direction LINGOTTO) that stops near the
Conference seat.
By car: a network of motorways connects Torino to Milano, Venezia, Trieste (A4), Bologna,
Firenze, Roma (A21+A1), and Genova (A21+A26). From Nice and Marseille, you can reach
Lingotto via Ventimiglia/Savona
/Savona (A6+A10), from Grenoble and Lyon, via Frejus/Susa (A32+T4).
The motorways are connected to the Torino ring road. Suggested exit: Corso Unità d’Italia;
from there, follow directions to Lingotto. There is an underground multi-storey
multi
car park that
can be accessed from the entrance on Via Nizza 230 or through Corso Giambone underpass
(accessible from Corso Unità d'Italia). Please find parking costs at:
http://www.ipi-spa.com/portafoglio-immobiliare/Lingotto
immobiliare/Lingotto-ipi/parking.aspx
Language & Presentations
Presentations will be written and presented in English.
It will be possible to download them from the ATA website, but the access will be limited to the
participants, by using a password that will be provided by ATA via email a few days after the
Conference.
Some innovative Presentations may be eligible for subsequent publication in ATA Review.
Registration & cancellation policy
You can register either on-line or via fax/email.
Refunds will be given to cancellations received in writing prior to 13 February 2014.
No refunds will be given after this deadline.. Replacement delegates are welcome at any time.
Payment
• on-line
• by bank transfer
• by credit card at the reception desk.
Congress dinner
The congress dinner will take place on 27 February.
February
Hotel information
Accommodation is not included in the Conference registration fee.
For information and booking your accommodation, please click on
http://www.ata.it/it/convegni/view/116/4th-international
international-conference-advanced-materials-andtechnologies-for-transport-lightweight-materials-sustainable
sustainable-solutions-for-the-next-vehiclesgeneration/ and go to ‘HOTEL’ section.
Registration form
4th International Conference ‘Advanced Materials and Technologies for Transport’
27–28 February 2014 – Torino (Italy)
Please return to: [email protected] or by fax: +39.011.9080400
Attendee Information:
Surname ___________________________________________________________________
Name ______________________________________________________________________
Company ___________________________________________________________________
Dept _______________________________________________________________________
Address_____________________________________________________________________
Post Code _____________ City ____________________________ Country _______________
Phone _____________________________Mobile____________________________________
E-Mail:______________________________________________________________________
Mail:______________________________________________________________________
Registration (it includes: on-line
line presentations, lunches, coffee, congress dinner on 27
February and 22% VAT). Please tick the appropriate category:
Speaker (FREE - only 1 for each
presentation)
Co-Author
Co
549,00
EUR
ATA Member
585,60 EUR
Delegate
671,00
EUR
Student (only ATA Juniores MembersMembership Nr ...................................)
FREE (congress dinner is not
included)
Congress dinner for accompanying persons
70,00 EUR (per person)
I will attend the congress dinner on 27 February
YES
NO
Payment:
Bank transfer to A.T.A. - S.r.L. - Banca Popolare di Novara, Filiale Beinasco TO (Italy)
IBAN: IT42L0503430090000000020407 – BIC: BAPP IT 21 A 93 - (payment must be
received before start of Conference)
Credit card at the conference registration desk (do not send in advance your credit card
number for authorisation to payment because we do not have this facility)
On-line payment on http://www.ata.it
Full refund is given to cancellations received in writing prior to 13 February 2014. No refunds after this
deadline.
Invoice to Company: _________________________________________________________
Dept ________________________________________________________________________
Address ______________________________________________________________________
Post code ______________City ______________________________Country ______________
Partita IVA-VAT
VAT Nr (Compulsory for Italian and EC Companies)___________________________
Codice Fiscale (only for Italian Companies)__________________________________________
Account Dept Phone: _____________________Account Dept E-Mail:_____________________
E
In compliance with art. 7 of Italian law 196/2003, your personal data are used exclusively for processing ATA activities. For further
information about our privacy policy: http://www.ata.it/en/content/42/privacy/
Date...................................................Signature
Signature...............................................................
A.T.A. S.r.L. – Strada Torino 32/A – 10043 Orbassano (TO) – Italy -Tel. +39.011.9080405 - Fax +39.011.9080400
Partita IVA / Codice fiscale 10241220010
Author
Document
Category
Uncategorized
Views
0
File Size
1 113 KB
Tags
1/--pages
Report inappropriate content