close

Enter

Log in using OpenID

Brass high pressure regulator, suitable for

embedDownload
Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
R1000
Brass high pressure regulator,
suitable for compressed air, gas and liquid
FEATURES
High pressure regulator, standard version inlet
pressure up to 220 bar (3190 psi), higher
pressure for special versions.
Suitable for industrial applications that
require high flow rates.
Inlet and outlet connection 1” – M.
Other connections available on request.
Outlet pressure up to 15 bar (218 psi) is
controlled by a diaphragm; greater outlet
pressures are controlled by a piston.
The main valve is balanced for outlet
pressure up to 50 bar.
Inlet and outlet pressure gauges.
Available the ATEX version
Brand II2GDcIICX.
For use in potentially explosive
atmospheres zones:
1, 21, 2, 22 (not for mines and zone 0).
The product complies with the directive
97/23/CE (PED).
SPECIFICATIONS
Inlet and outlet pressure gauges: accuracy class 1.6, G 1/4 ports
Diaphragm regulator weight: ~15 kg (~33 lb)
Piston regulator weight: ~17 kg (~37 lb)
Standard version operating temperature -20 °C ÷ +60 °C (-4 °F ÷ +140 °F)
Main valve leakage classification: VI (bubble tight)
Flow coefficient: Kv= 2.5 Nm3/h (Cv= 2.93 US gal/min)
Degree of protection: IP25
Big dimension upstream filter
MATERIALS
Body and bonnet: brass
Internal parts: brass
Main valve spring: C85 (not in contact with the fluid)
Adjusting spring: C85 (not in contact with the fluid)
Diaphragm (for outlet pressure up to 15 bar): two coupled diaphragms neoprene+PTFE
(PTFE in contact with the fluid)
Piston (for greater outlet pressure): brass
O-ring: EPDM or FPM according to the fluid (other compounds available on request)
Main valve gasket: PA 6.6
ACCESSORIES
Wall mounting bracket: M1B304
Dome loaded version, outlet pressure to be controlled by a pilot pressure
SPARE PARTS
Gauges
Overpressure valve
Complete kit: filter cartridge, complete main valve, o-rings, assembled diaphragm
Copyright © ID Insert Deal S.r.l. - All rights reserved
2
available model types
Regolatori di pressione per alta pressione / High pressure regulators
Regolatori di pressione per alta pressione
in ottone, idonei per aria compressa e gas tecnici non corrosivi e liquidi
Pressure regulators for high pressure,
made of brass, for compressed air and technical, non corrosive gases and liquids
Corpo da lavorazione di barra tonda, attacco entrata G 1-M
Body by machining round bar, inlet connection G 1-M
PS bar
P.Out bar
CONNECTION
IN
CONNECTION
OUT
CODE
R1000 MA
R1000 MB
R1000 MC
80
80
80
0,8-8
1,5-15
3-30
G 1-M
G 1-M
G 1-M
G 1-M
G 1-M
G 1-M
1000#
1000#
1000#
R1000 HA
220
0,8-8
G 1-M
G 1-M
1000#
R1000 HB
220
1,5-15
G 1-M
G 1-M
1000#
R1000 HC
220
3-30
G 1-M
G 1-M
1000#
R1000 HD
220
5-50
G 1-M
G 1-M
1000#
R1000 HF
220
20-200
G 1-M
G 1-M
1000#
TYPE
MEDIUM
R1000
CO2
CO2
CO2
O2
H2 - CH4
Aria - N2 - Ar - He
O2
H2 - CH4
Aria - N2 - Ar - He
O2
H2 - CH4
Aria - N2 - Ar - He
O2
H2 - CH4
Aria - N2 - Ar - He
O2
H2 - CH4
Aria - N2 - Ar - He
ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD
Attacchi in/out diversi da standard (nipples esterni 1"NPT-M - 1"NPT-F) / Connections different from standard (external
nipples 1"NPT-M - 1"NPT-F)
ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD
Pressione ingresso 250-300 bar / Inlet pressure 250-300 bar
Pressione ingresso 350-400 bar / Inlet pressure 350-400 bar
Pressione uscita pretarata / Pre-set outlet pressure
Pressione uscita tarata fissa, vite con dado cieco / Fixed outlet pressure, screw with cup nut
O-ring secondo FDA / O-ring in accordante to FDA
O-ring FPM / O-ring FPM
O-ring speciali / Special O-ring
Convogliamento su campana e Valvola di sovrapressione / Venting on bonnet and over pressure Valve
Versione idonea per liquidi / Execution for liquid
Versione regolatore pilotato / Dome loaded version
Cromatura-nichelatura / Crome-Nichel plating
Stampigliatura su specifica del cliente / Not standard branding
Versione ATEX / ATEX version
Temperature diverse da standard / Special temperature range
Sgrassato uso O2 / Degreased for O2
ACCESSORI / ACCESSORIES
Kit staffa + viti (mod. HA.HB, HC, HD) M1B304 / Bracket with screws (mod. HA.HB, HC, HD) M1B304
Kit staffa + viti (mod. HF) M1B305 / Bracket with screws (mod. HF) M1B305
Copyright © ID Insert Deal S.r.l. - All rights reserved
3
generating the product code
R1000 IN OTTONE
AA BB CC DD E F GG
AA
Attacchi / Connections
BB
Pressione ingresso / Inlet pressure
CC
Intervallo uscita / Outlet range
DD
Tipologia di fluido / Fluid type
E
Pilotato / Pilot operated
F
Marchiato / Marked
GG
Accessori / Accessories
01
R0
Y0
J0
L0
D0
E0
F0
G0
V0
15
94
98
N
P
I
Z
00
1" NPT-F
G 1-M
1" NPT-M
220 bar H
80 bar M
A - Pout 0,8 - 8 bar
B - Pout 1,5 - 15 bar
C - Pout 3 - 30 bar
D Pout 5 - 50 bar
F Pout 20 - 200 bar
O2 PED CLASSE III
FPM PED CLASSE III
EPDM
Non pilotato
Pilotato
ID
Dir ATEX 94/9 CE
Nessun accessorio
CODE COMPOSITION EXAMPLE
1000# R0 J0 E0 98 N I 00
1000#: Brass regulator R1000
R0: inlet and outlet connections G 1 - M
J0: Inlet pressure 220 bar
E0: Outlet pressure 1,5-15 bar
98: EPDM gaskets
N: Not dome loaded
I: Insert Deal
00: No accessories
Copyright © ID Insert Deal S.r.l. - All rights reserved
4
technical drawings (all dimensions in mm)
Bracket to be ordered separately
Order number M1B304
IN/OUT
G1
1" NPT
L1
149
156
L2
101
106
L2
Bracket
123
~370
IN
OUT
~128
L1
12
108
Ø135
Pin=80 bar - Pout=0.8÷8/1.5÷15
Pin=220 bar - Pout=0.8÷8/1.5÷15
85
Bracket to be ordered separately
Order number M1B304
IN/OUT
G1
1" NPT
L1
149
156
L2
101
106
L2
Bracket
158
~406
IN
OUT
~128
L1
12
108
Pin=80 bar - P.out=3÷30
Pin=220 bar - P.out=3÷30/5÷50
Copyright © ID Insert Deal S.r.l. - All rights reserved
Ø135
85
5
technical drawings (all dimensions in mm)
Bracket to be ordered separately
Order number M1B305
IN/OUT
G1
1" NPT
L1
149
156
L2
101
106
L2
IN
OUT
~111
L1
158
~387
Bracket
12
108
Pin=220 bar - Pout=20÷200
Copyright © ID Insert Deal S.r.l. - All rights reserved
85
6
ID Insert Deal Srl
Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso.
ID Insert Deal reserves the right to change and/or modify product specifications without prior notice.
Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e
manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente.
Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and
maintenance of any ID products remains entirely to the purchaser.
Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl.
Reproduction forbidden. All rights reserved; the hereby document can’t be reproduced, also partially, without the authorization of ID Insert Deal Srl.
1^S-1000 - R1000_EN_00
Azienda con sistema di gestione qualità certificato.
certificato N° 50 100 9191
Company with certificated quality management system.
certificate N° 50 100 9191
Copyright © ID Insert Deal S.r.l. - All rights reserved
7
Author
Document
Category
Uncategorized
Views
0
File Size
360 KB
Tags
1/--pages
Report inappropriate content