Log in using OpenID

Aluminum Powders Pastes and Flakes Market Growth, Demand, Opportunity, Analysis And Forecasts To 2020

According to the report, demand from automobile industry will be a key driver for market growth. Aluminum is used in various applications in the automobile industry
Aluminum Powders Pastes and Flakes Market Share and Size,
Emerging Trends, Analysis, Overview and Outlook, Growth And
Segment Forecasts To 2020
Technavio Announces the Publication of its Research Report Global Aluminum Powders, Pastes, and
Flakes Market 2016-2020
Technavio recognizes the following companies as the key players in the global aluminum powders,
pastes, and flakes market: Alcoa, AMG Alpoco UK, ECKA Granules, MEPCO, RUSAL, and Toyal.
Other Prominent Vendors in the market are: Ampal, Bahrain Atomizer, ECKART, Silberline, and Valimet.
Browse full report with TOC@
Commenting on the report, an analyst from Technavio’ s team said: “Presence of aluminum paste in
photovoltaic systems and electronics will be a key trend for market growth. Aluminum is a corrosion
resistant material and is two times more conductive than copper. In addition, aluminum is also a good
insulator and is increasing its market share in the electronics sector. Aluminum powder is expected to
increase its share in photovoltaic solar cells. Aluminum is used to produce thick film pastes applied to
the back side of the silicon. These pastes are screen printed and metallized to generate an electrical
conductor which helps in proper functioning of the photovoltaic solar cell. The application requires
superfine aluminum powders and paste with the tightly controlled particle size distribution.”
According to the report, demand from automobile industry will be a key driver for market growth.
Aluminum is used in various applications in the automobile industry. Aluminum powders, pastes, and
flakes are used in automotive paints and in OEM coatings of high-duty engine components and brake
linings. By volume, the global motor vehicle production was 92.14 million units in 2015 and will reach
108.95 million units by 2020, growing at a CAGR 3.41%. This predicted growth of the motor vehicle
production translates into the demand for aluminum powders, pastes, and flakes for in the automobile
Further, the report states that one of the challenges for the market will be power shortage that leads to
imbalance in demand supply. The aluminum industry is considered to be power intensive as 30%-40% of
the cost of production is attributed the power cost in smelting operations. Globally, it is noted that even
renowned smelters and downstream operations are taking production cut measures over power
shortage to sustain the business. As a result, many smelters have shut down during 2010-2015. In 2010,
Qatalum, one of the largest aluminum smelters in the Middle East based out of Qatar, was shut down
due to power outages. More recently, Alcoa announced that it will close its Warrick County smelting
operations in 2016. As South America becomes more dependent on primary aluminum imports,
hydropower has become insufficient in fulfilling power requirements for the region. For instance, we
expect Brazil to import power from Argentina and Uruguay in order to address the deficiency of power
to the industrial sector including aluminum production during the forecast period.
The study was conducted using an objective combination of primary and secondary information
including inputs from key participants in the industry. The report contains a comprehensive market and
vendor landscape in addition to a SWOT analysis of the key vendors.
Request A Sample copy of This Report @
About Aluminum Powder
Aluminum powder is a fine granular powder usually made of spherical or spindle-shaped aluminum
particles. It is widely produced by atomization of pure molten aluminum metal that is converted into
fine droplets, solidified, collected and used for various applications. Aluminum flakes are derived from
aluminum powder by the dry ball milling process. Aluminum flakes are typically irregular in shape under
microscopic examination. Aluminum paste is made from aluminum powder or milled flake powder by
the wet ball milling process using solvents, such as isopropyl alcohol, ethyl acetate, and xylene.
Technavio’ s analysts forecast the global aluminum powders, pastes, and flakes market to grow at a
CAGR of 4.87% during the period 2016-2020.
Covered in this report
The report covers the present scenario and the growth prospects of the global aluminum powders,
pastes, and flakes market for 2016-2020. To calculate the market size, the report considers the revenue
generated through sales of aluminum powders, pastes, and flakes for end-users such as industrial,
automotive, chemical, construction, explosives, defense and aerospace, and others.
The market is divided into the following segments based on geography:
Technavio's report, Global Aluminum Powders, Pastes, and Flakes Market 2016-2020, has been
prepared based on an in-depth market analysis with inputs from industry experts. The report covers the
market landscape and its growth prospects over the coming years. The report also includes a discussion
of the key vendors operating in this market.
To Get Discount On The Report @
Connect for more details:
Sam Collins
Market Reports Center
1-646-883-3044 (US)
[email protected]
beltranbob87328   документов Email
Science and Nature
File Size
314 Кб
Пожаловаться на содержимое документа