close

Enter

Log in using OpenID

#14-1 2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM

embedDownload
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 1
#14-1
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 2
Dear SLP Customer,
The UTV industry is a rapidly evolving sport. Within the past year
much has changed and many new and exciting models have been
released. We are excited to be a part of this evolution. Our passion
for this industry has allowed us to develop many new products to
help you (and us) have a more enjoyable experience each and every
time you climb behind the wheel of your Polaris UTV. No matter
where your UTV adventure takes you, we are sure to have products
to help you get there. Please feel free to contact one of our knowledgeable staff with any questions you may have. And, be sure to say
hi when you see us on the trail or at one of the many events we plan
on attending this year.
Always Ready to Serve,
The Starting Line Products Crew
See page 40 for
more information.
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 3
RZR Doors
Polaris 570 RZR, 800
RZR, RZR-S, XC & RZR XP 900
for
The SLP RZR doors are light, durable and attractive.
The strong, lightweight powder coated steel tube
frame makes for an extremely durable door that will
retain its function and fit for years. The light weight
hard plastic skin is attractive and withstands bumps
and bangs without denting unlike metal skins. The
spring loaded double catch interior latch assembly allows quick and easy access with only a light push or
pull required to latch it closed. And best of all, they
provide the operator and passenger a more comfortable off-road experience. Sold per pair.
2008-10
Kits
raphic
Door G
Please
le
b
a
il
a
Av
Inquire
e 4
See Pag
2011-14
Door Seal Kit (Optional): Helps to keep dust, mud and
water out of the cab. Each kit comes with enough seal for
a complete set of SLP RZR Doors (see page 4).
PART #
67-144
67-122
67-122
67-122
67-158
DeSCRiPTiON
PRiCe/PAiR
2008-10 RZR and RZR-S
429.00
2012-14 570 RZR
429.00
2011-14 800 RZR, RZR-S, XC
429.00
2011-14 RZR XP 900
429.00
Optional Door Seal Kit
29.95
3
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 4
RZR Door Graphic Kits
for SLP Doors on
Polaris 570 RZR, 800 RZR, RZR-S,
RZR XC and RZR XP 900
SLP now offers a variety of graphics kits to match your RZR’s stock
graphics. To see a more inclusive list, visit our website at
www.startinglineproducts.com. If you don’t see a graphic kit that
matches your unit, please contact us as new graphic kits are being
added all of the time. These graphics are sold per pair. If purchased at
the same time as a door set from SLP, the graphics can be applied
prior to shipping.
DeSCRiPTiON
SLP RZR Door Graphics Kit, Pair
Install Graphics Kit, Pair
Visit our website to
see available color
combinations.
PRiCe/PAiR
175.00
50.00
RZR Door Seal Kit for SLP Doors on Polaris 570
RZR, 800 RZR, RZR-S, RZR XC and RZR XP 900
This seal kit keeps even more dust and dirt out of the cab
area of the RZR. It consists of an automotive type seal that
fastens to the plastic door jam of the RZR. When the door is closed
the seal has tension on the door and effectively keeps dust from entering at this seam. It also places tension on the door frame and
eliminates the door from rattling as the RZR flexes and twists as it
goes over obstacles encountered on the trail. PART #
PRiCe/KiT
67-158
4
29.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 5
Rocker Armorв„ў for Polaris RZR
SLP’s Rocker Armor™
protects the underside of the
Polaris RZR against rocks and
other hard objects without
losing valuable ground clearance. Made of high-tensile
steel for superior strength,
they slide easily over sharp
rocks and are extremely
resistant to gouging. The protection area covers from wheel
well to wheel well and they are
powder coated for maximum
durability. Includes mounting
hardware and installation
instructions. Sold per pair.
PART #
67-100
67-103
67-109
67-110
67-126
67-127
67-145
67-183
RZR 900 XP Rocker Armorв„ў
RZR/RZR-S Rocker Armor™
RZR-4 XP 900 Rocker Armorв„ў
DeSCRiPTiON
570/800 RZR, RZR-S & XC
570/800 RZR,RZR-S & XC
800 RZR-4
800 RZR-4
RZR XP 900**
RZR XP 900**
RZR-4 XP 900 and Jagged X**
RZR XP 1000
COLOR
PRiCe/PAiR
Silver and Black
255.00
Black Texture
255.00
Silver and Black
479.00
Black Texture
479.00
Silver and Black
299.00
Black Texture
299.00
Black Texture
479.00
Black Texture
TBA
800 RZR-4 Rocker Armorв„ў
*Free freight
available for
ground service
only on SLP’s
choice of carriers.
ight*
Free Fre
ow
to L er
s
48 State
**RZR 900 Rocker Armorв„ў has an integrated fuel tank guard.
5
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 6
Gas Tank Armor for Polaris 570/800 RZR
Gas Tank Armor is a must have for all 570/800 RZR, RZR-S, XC
and RZR-4 owners. This product will keep rocks, sticks, and any
other sharp objects from piercing the exposed rear portion of the
gas tank. It is compatible with SLP Rocker Armorв„ў and is
manufactured from 0.090” thick aircraft grade aluminum.
PART #
67-112
DeSCRiPTiON
570/800 RZR, RZR-S, XC & RZR-4
PRiCe/KiT
64.00
Note: For fuel tank protection on the RZR XP 900, see
our Rocker Armorв„ў on page 5.
Mud Guard for Polaris 570/800 RZR
The Mud Guard will keep rocks, sticks, and any debris from building
up in your undercarriage on the driver side of your vehicle. It’s compatible with SLP Rocker Armor™ and is manufactured from 0.090”
thick aircraft grade aluminum.
PART # DeSCRiPTiON
67-113 2008-10 800 RZR and RZR-S
67-114 All 800 RZR-4,
2011-14 570/800 RZR, XC & RZR-S
PRiCe/KiT
69.00
74.00
Highly recommended for use with
Rocker Armorв„ў (see page 5).
67-114 Pictured
6
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:51 PM Page 7
Performance Slip-On Silencer
for Polaris 800 RZR Models
This performance slip-on silencer for the Polaris RZR is designed for maximum airflow without substantially increasing sound level output. It provides a 79% increase
in airflow over the stock silencer. This results in a substantial performance improvement, showing better throttle response as well as top-end horsepower. The sound
levels are within 2 decibels of stock (90 dBA on SAE J1287 test) for a trail friendly performance silencer.
It also features a removable
PART # DeSCRiPTiON
PRiCe
spark arrestor.
09-106 2008-14 Polaris 800 RZR, RZR-S, XC and RZR-4
289.95
No fuel controller required.
Super Silent Muffler for Polaris 800 RZR Models
This muffler for the Polaris RZR is an incredible 5 decibels quieter than stock
while providing a 41% increase in airflow (20 more cfm) for more power. The
subtle sound of this muffler provides a relaxing environment for the rider and
passenger to carry on a conversation easily while under way, not to mention the benefit to others in the surrounding area. Whether you are using
your RZR to get you in and out of your favorite hunting spots, or just want
to have a more enjoyable ride with less noise, this muffler is perfect for you.
PART # DeSCRiPTiON
09-108 2008-14 Polaris 800 RZR, RZR-S, XC and RZR-4
PRiCe
359.95
No fuel controller required.
Features a removable spark arrestor.
Note: 2009 Standard RZR and 2009 RZR-S will require the rear differential
stabilizer bracket to be changed to the 2010 rear differential stabilizer bracket
(Polaris Part Number 3235062).
ter on
5 dB quie
7
SAE J128
ry
a
on
stati
00 RPM
test @ 33
7
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 8
Performance Slip-On Muffler
for Polaris RZR XP 900 and RZR-4 XP 900
This slip-on silencer for the Polaris XP 900 RZR delivers an
additional 4.2 horsepower with well over double the airflow
compared to the stock silencer. This translates into a substantial
performance increase and better throttle response. Its stainless steel construction provides excellent
strength and durability. The sound level measures 95.5 DB (at 4200 RPM) using the SAE J1287 sound
test. It also includes a spark arrestor
PART # DeSCRiPTiON
PRiCe
that can be added for trail use.
Fuel controller not required.
For optimal performance use in conjunction with High Flow intake Kit (page
29), Power Commander V (page 25) and
SLP Clutch Kit (page 32-33)
as
encer
l
i
S
e
Same
on th
d
n
u
Fo
ed X
Jagg
8
09-109 2011 RZR XP 900
09-110 2012-14 RZR XP 900 and RZR-4 XP 900
475.00
475.00
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 9
SLP Performance Package
for Polaris XP 900 RZR and XP 900 RZR-4
This sharp new performance package from SLP is
sure to give your XP 900 RZR the edge! We have combined our
Performance Slip-On Muffler, High Flow Intake Kit, Power
Commander V with pre-programmed SLP Map and a Clutch Kit.
Together these bolt-on parts optimize the performance of the XP
900 by delivering an addiontal 7 horsepower (3 1/2 lengths in a
drag race). The Performance Slip-On Muffler delivers well over
double the airflow compared to stock. It is constructed of stainless
steel for strength and durability. The High Flow intake Kit includes an additional vent that provides substantially more intake
surface area for a significant increase of air flow for better throttle
response, quicker acceleration and better top-end speed. The Power
Commander V with SLP pre-programmed map made specifically for this
combination optimizes ignition and fuel delivery for maximum horsepower
and running consistency. Finally, a Complete Clutch Kit that insures maximum horsepower transfer to the ground and can be tailored to match your
combination and riding conditions.
er
epow
Hors
8
e
g
See
Pa
h on
Grap
Performance Kits also available for Jagged X and Polaris Stage 2 Kit, please inquire.
elevation
0-4500’
Description
Trail Kit
Price
0-4500’
Sand, Mud or
Larger Tires
Part#
Price
4500’ +
Part #
54-401
1252.80
54-402
1252.80
Trail Kit
Model
Part #
2011 XP 900 RZR
54-400
1252.80
2012-14 XP 900 RZR
54-404
1252.80
54-405
1252.80
54-406
2012-14 XP 900 RZR-4
54-420
1252.80
54-422
1252.80
54-421
Price
4500’+
Sand, Mud or
Larger Tires
Part#
Price
54-403
1252.80
1252.80
54-407
1252.80
1252.80
54-423
1252.80
9
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 10
Performance Slip-On Muffler
for Polaris XP 1000 RZR/RZR-4
This slip-on muffler delivers 30% more
air flow compared to the stock muffler. This translates
into a substantial performance increase and better
throttle response. Its stainless steel construction provides excellent strength and durability. The sound level
measures 95.5 DB (@ 4200 RPM) using the SAE
J1287 sound test. It also features spark arrestors that
can be added for trail use.
No fuel changes required.
PART #
09-111
DeSCRiPTiON
XP 1000 RZR/RZR-4
PRiCe
475.00
High Strength Front Bumper Upper Mount Kit /
Radiator Support
for Polaris 570/800 RZR, RZR-S, RZR XC & RZR-4
This kit replaces the stock radiator mount bracket that also acts as an
upper mounting point for most bumpers. It is made of high-strength steel
that has been reinforced so that it can take more impact in the event of a
crash without folding into and damaging the radiator and other front-end
components. This kit can be used on its own or with
PART #
PRiCe/KiT
most factory and aftermarket front bumpers.
67-129
10
75.00
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 11
Heavy Duty Front Bumper Kit
for Polaris 570 RZR, 800 RZR/RZR-S/XC/
RZR-4, XP 900 RZR/RZR-4 & Jagged X
Whether bajaing down a nasty trail or creeping across rocky,
rugged terrain, this bumper kit protects well against the gnarliest conditions. Made of 1 3/8” x .095” wall DOM for strength
then powder coated for a great look and
maximum durability. It also features two
ight*
anchor points for D-Rings (see page 21),
Free Fre
as well as mounting points for Baja Lights.
to Lower
s
Kit includes all mounting hardware and in48 State
stallation instructions.
2008-10
Note: This kit mounts to factory upper mounting location on
RZR 570/800 models . To increase strength of this mounting
position, use SLP High Strength Upper Mount Kit (part #67129) see page 10.
PART #
67-101
67-104
67-123
67-125
DeSCRiPTiON
2008-10 Silver and Black
2008-10 Black Textured
2011-14 Silver and Black
2011-14 Black Textured
PRiCe/KiT
400.00
400.00
350.00
350.00
2011-14
*Free freight is available for ground service only on SLP’s choice of carriers.
11
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 12
Plate Style Front Bumper Kit
for All Polaris 570/800/900 RZR Models
This new front bumper kit from SLP is built out of tough high tensile
strength steel plate material. It blends into the stock body lines and
creates a nice look that will make you wonder if it were part of the
original conceptual design of the RZR. It comes standard with a
mounting location for a 12" light bar (Polaris Part # 2879500) and
two D-ring (see page 21) mounting locations while providing great
protection to the front of your RZR.
PART #
67-157
67-160
67-161
67-162
DeSCRiPTiON
PRiCe/KiT
Black Textured - Front Bumper Kit
360.00
Silver Textured - Front Bumper Kit
360.00
Black Textured - Bumper Hoop (optional)
45.00
Silver Texured - Bumper Hoop (optional)
45.00
*Bumper hoop
sold separately.
Note: Not compatible with a winch.
Front Skid Plate for Polaris All 570/800 Models
This skid plate covers the area between the SLP Front Bumper and the stock
center plastic skid plate, which is the section of frame where the A-Arms
mount. It is made from high-tensile strength steel to protect against rocks and
other hard objects without losing valuable ground clearance. This material
slides easily over sharp rocks and is extremely
PART #
PRiCe/KiT
resistant to gouging.
67-130
12
35.00
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 13
Lightweight Rear Bumper Kit for 2008-14 Polaris 800
RZR/RZR-4/XC and 2011-14 800 RZR-S
This SLP Lightweight Rear Bumper Kit provides a stylish new look while
being strong and lightweight to protect the plastic on the rear of your RZR.
Designed with a "tight to the body" fit for an attractive look that keeps it from
taking up extra room in trailers, truck beds, or in your garage. It weighs in at a
meager 8 pounds and installs quickly and easily. Kit includes all mounting hardware and installation instructions.
ight*
Free Fre
NOT for 2009-10 RZR-S.
to Lower
s
PART # DeSCRiPTiON
PRiCe/KiT
48 State
67-148 Silver and Black
300.00
67-149 Black Textured
300.00
*Free freight is available for ground service only on SLP’s choice of carriers.
Heavy Duty Rear Bumper Kit
for 2008-14 Polaris 800 RZR/RZR-4/XC and
Tire not included.
2011-14 800 RZR-S
This Rear Bumper Kit is a must have for any RZR owner! In stock form there is no
protection for the rear of the vehicle. This kit protects your investment, looks great,
and opens up additional storage area. It incorporates a rear tire mount, freeing up
trunk space to haul the necessary gear so you can fully enjoy your outdoor experience. Made of 1 3/8” x .095” wall DOM for strength then powder
coated for a great look and maximum durability. Bumper also features a built in flag mount. Kit includes all mounting hardware and inight*
Free Fre
stallation instructions.
PART # DeSCRiPTiON
PRiCe/KiT
w
o
to L er
s
NOT for 2009-10 RZR-S. 67-102 Silver and Black
375.00
48 State
67-105 Black Textured
375.00
*Free freight is available for ground service only on SLP’s choice of carriers.
13
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 14
Flag Mount Kit
This flag mount installs quickly and easily on any
1 1/2” to 1 3/4" horizontal or vertical roll bar. It is manufactured
from billet aluminum for strength and durability. It is supplied
with 3 plastic bushings and a quick
PART #
PRiCe/eA.
lock bolt, making it compatible with
67-146
44.95
any flag pole up to 3/8" diameter.
Note: Utilizes Torx Wrench found in stock tool kit for flag installation.
Flag and Flag Pole Kits
These SLP Logo Flags help to increase
visibility while giving a custom look. They are sewn completely around all the edges for durability. Flag and Flag
Pole kits come with a 6’ long by 5/16” diameter pole and
flag that utilize rubber grommets to hold the flag into
place. Designed to be used with the flag mount kit above.
Some areas have laws that require orange flags to be
used for maximum visibility. Check your local laws.
PART #
67-1661
67-1631
67-166
67-163
14
DeSCRiPTiON
SLP Logo Pennant Flag Only
SLP Logo 12” x 18” Flag Only
SLP Logo Pennant Flag with Pole
SLP Logo 12” x 18” Flag with Pole
PRiCe/KiT
9.95
9.95
24.95
24.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 15
Street Legal Kit for Polaris UTV
This Street Legal Kit contains 4 small LED Ultra-Bright lights, 3/4” diameter with panel
mounting grommet, toggle type turn signal switch, signal flasher, signal indicators, 130
Db horn, horn button, license plate mounting bracket and lighting, wire, fuses, fuse
holders, all needed connectors and detailed instructions. Some states may have additional requirements or may not allow UTV's to be street legal. This kit is generic and
is not sold as a street legal solution for all states, it is the responsibility of the
purchaser to understand requirements and laws for their particular state.
PART #
67-155
PRiCe/KiT
239.95
Shock Spring Kit by Zbros Racing
for Polaris XP 900 RZR/RZR-4
This shock spring kit consists of four high quality main springs with a
progressive tender spring to make your rear dual rate for a more plush ride. You
also get all the needed hardware to adapt your stock shocks to these 2.5” id
springs along with a CNC spring divider. Works with stock Fox or Walker Evans
Shocks.
PART # DeSCRiPTiON
PRiCe/KiT
67-215
Stage 1 Spring Kit, set of 4
580.00
Trailing Arm Guards
for Polaris XP 900 RZR/RZR-4 and Jagged X
Made out of UHMW plastic for super strength and wear resistance,
these trailing arm guards provide great protection in all conditions,
but especially in the rocks where they slide easily over hard surfaces. They compliment the use of
PART #
PRiCe/PAiR
our Rocker Armorв„ў (page 5).
67-137
250.00
15
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 16
High Clearance Trailing Arms
by Zbroz Racing for Polaris XP 900 RZR/RZR-4 & Jagged X
Tired of dragging your stock bulky trailing arms over every ledge or
rock you cross? Problem solved: Zbroz Racing’s ARS FX Max Ground
Clearance Trailing Arms. These trailing
PART # COLOR PRiCe/KiT
arms offer 3" more clearance while main- 67-185 Black 725.00
taing the use of the stock shock length
67-186 White 725.00
and mounting location. This kit includes
67-187 Orange 725.00
both right and left replacement trailing
67-188
Blue
725.00
arms and installation instructions. Powder
67-189
Red
725.00
coated for durability.
High Clearance/Strength Radius Rods
by Zbroz Racing for Polaris XP 900/1000
Maximize ground clearance on the Polaris RZR 900/1000 XP with
a set of max ground clearance and high strength radius rods from
Zbroz Racing. Simply bolt these in place of your stock rods and you’re ready to
go. These radius rods are a simple bolt on replacement for the stock radius rods.
Each kit includes both
PART#
PART#
left and right replaceCOLOR XP 900 XP 1000 PRiCe/KiT XP 900 XP 1000 PRiCe/KiT
ment radius rods and
UPPeR UPPeR
LOWeR
LOWeR
installation instructions. Black
67-190 67-200 189.95
67-195 67-205
325.00
Powder coated for a
White
67-191 67-201 189.95
67-196 67-206
325.00
durable attractive finish. Orange 67-192 67-202 189.95
67-197 67-207
325.00
Blue
Red
16
67-193
67-194
67-203
67-204
189.95
189.95
67-198
67-199
67-208
67-209
325.00
325.00
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 17
High Clearance Front Lower A-Arms
by Zbroz Racing for Polaris XP 900 RZR/RZR-4
These lower A-Arms add some much needed ground clearance and
strength to the front end of your XP 900. They are sold as a pair and
easily installed (pivot parts and ball joints
PART # COLOR PRiCe/KiT
are reused off stock lower A-arms). We
67-210 Black
329.00
recommend their use only with stock axles 67-211 White 329.00
and CV joints. They are powder coated in
67-212 Orange 329.00
popular RZR colors, however, black is
67-213
Blue
329.00
most commonly stocked.
67-214
Red
329.00
Billet Pistol Grip Shifter Handle
for Polaris All RZR Models
CNC machined from solid billet aluminum, this
SLP Pistol Grip Shifter Handle is designed to
provide a firm, comfortable grip, with a clean,
custom look. Designed to fit all Polaris RZR
models.
PART #
67-170
XP 1000 Shown
PRiCe/SeT
39.95
17
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 18
Secure Storage Glove Box
for Polaris RZR all models except RZR 1000
This attractive aluminum glove box from SLP offers well-needed storage
for the Polaris RZR. It is built with a strong aluminum body and faceplate that utilizes a keyed lock for securing your valuables. Located in a
position that provides the passenger easy access and is great for cell
phones, cameras, small handguns, wallets, vehicle registration, etc.
Also, it is weather resistant
PART # DeSCRiPTiON
PRiCe/KiT
to protect your valuables.
67-121
67-128
Polished Aluminum
Black Texture
155.00
155.00
Billet Gas and Brake Pedal Covers
for 2009-14
Polaris 570/800 RZR/RZR-S/RZR-4/XC,
XP 900 RZR/RZR-4 and Jagged X
These billet pedal covers bolt to the stock steel pedals to give you a trick
billet look as well as increased performance. The stock gas pedal will not
reach full throttle without turning your foot sideways to force the pedal
down to full throttle. The additional height of this billet gas pedal comfortably gives you the extra 7% throttle opening the stock pedal lacks. This
allows you to comfortably achieve full throttle every time you desire it.
The unique pattern on these pedals provides the
PART #
PRiCe/SeT
proper amount of grip on the bottom of your foot.
67-138
84.95
Sold per set. Will not fit 2008 models.
18
Shown with pedal
covers installed on
stock levers. Levers
not included
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 19
Hitch Receiver Assembly
for Polaris 900 RZR/RZR-4 Models
This receiver hitch for the RZR XP 900 is powder coated
and made of high-tensile steel. It was designed to provide a good towing/pulling point while keeping the receiver out of the way of most trail obstacles. The 1/2"
D-Ring and Stinger Combo, part number 67-119, makes
a good companion and this hitch will also accept most
class II stingers (1 1/4" x 1 1/4").
WARNiNG: This is not a certified towing
device, use at your own risk.
Not for Jagged X 
PART #
67-156
67-119
DeSCRiPTiON
Hitch Receiver Assembly
D-Ring and Stinger Combo
PRiCe/KiT
99.95
39.95
1 1/4” x 1 1/4” Stinger and 1/2” D-Ring Combo
for Polaris All 570/800 RZR Models and 900 Models
with SLP  Hitch Receiver Assembly
This D-Ring and Stinger Combo gives you a solid towing/pulling point on your
RZR without risking damage to the frame or suspension. The D-Ring is load
rated at 4,000 pounds and galvanized for strength and durability.
The stinger is made from solid billet 6061 T-6 aluminum for a
strong, lightweight and durable part. This stinger will also help
keep the receiver hitch from deforming if your RZR bottoms on a
hard object.
WARNiNG: This is not a certified
towing device, use at your own risk.
PART #
67-119
PRiCe/KiT
39.95
19
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 20
1 1/4” x 1 1/4” Aluminum Stinger (Ball Mount)
for Polaris All 570/800 RZR Models and 900 Models with SLP
Hitch Receiver Assembly
This aluminum stinger fits the 1 ¼” x 1 ¼” class II hitches that
the RZR 570/800 are equipped with in stock form as well as 900
models with SLP part# 67-156 receiver hitch assembly. It is
made from billet aluminum to be lightweight and attractive. It is designed to
accept 1 7/8” and 2” balls with a 3/4” shaft diameter and minimum 1 ¾” shaft
length. Built for off-road utility purposes only, this hitch is not load rated. Sold
in kit form with pin and clip, with or without PART # DeSCRiPTiON
ball. See part numbers and descriptions
67-173 1 1/4” x 1 1/4” Stinger (no ball)
below.
67-174 1 1/4” x 1 1/4” Stinger and 1 7/8” Ball
WARNiNG: This is not a certified towing
device, use at your own risk.
67-175
67-180
67-181
1 1/4” x 1 1/4” Stinger and 2” Ball
1 7/8” Ball
2” Ball
PRiCe/KiT
49.95
67.90
67.90
17.95
17.95
2” x 2” Aluminum Stinger and
5/8” D-Ring Combo
This D-ring and Stinger Combo gives you a solid towing/pulling point on
your UTV without risking damage to the frame or suspension. Designed
specifically to fit Polaris Ranger models with a 2” x 2” receiver hitch, it has
two mounting holes for the hitch pin allowing it to be used on many other
UTV models as well. The stinger is made from solid billet 6061 T-6 aluminum for a strong, lightweight
and durable part. The D-ring is 5/8” diameter, load rated at 6,500 pounds and
PART #
PRiCe/KiT
galvanized. Sold in kit form with hitch pin/clip and D-ring.
67-179
59.95
20
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 21
2” x 2” Stinger (Ball Mount) with D-Ring Combo
for Polaris Ranger XP 900
This unique aluminum stinger combines a ball mount
with a D-ring. Designed specifically to fit Polaris Ranger
models with a 2” x 2” receiver hitch, this stinger provides
the ultimate in utilitarian use. It has two mounting holes
for the hitch pin allowing it to be tucked in tight or extended slightly
out of the receiver. Even though it was designed specifically for the Ranger, it can used on many other
UTV models as well. It is designed to accept 1 7/8” and 2” balls with a 3/4” shaft diameter and minimum 1 ¾” shaft length. Built for off-road utility purposes only, this hitch is not load rated. Sold in kit
form with hitch pin/clip and D-ring,
PART # DeSCRiPTiON
PRiCe/KiT
with or without ball. See part num67-176 2” x 2” Stinger with D-Ring (no ball)
79.95
bers and descriptions below.
67-177 2” x 2” Stinger with D-Ring and 1 7/8” Ball
97.90
WARNiNG: This is not a certified
towing device, use at your own risk.
67-178
67-180
67-181
2” x 2” Stinger with D-Ring and 2” Ball
1 7/8” Ball
2” Ball
Universal D-Rings
#67-117
These Universal D-Rings can be mounted to your RZR for a
rugged offroad look while adding easy access to winch or tie
down points. #67-117 fits perfectly in the anchor points of
SLP Front Bumpers. Sold per each.
PART #
67-117
67-171
D-RiNG LOOP
1/2” diameter
5/8” diameter
PiN SiZe
5/8”
3/4”
LOAD RATe
4,000 lbs
6,500 lbs
97.90
17.95
17.95
#67-171
PRiCe/eA.
10.95
16.50
21
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 22
Hood Grill / Radiator Vent Kit
for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent kit not only provides a trick new look but also delivers an
additional 116% more air intake surface area to the radiator. This allows
the radiator to more efficiently cool the engine while moving. Offered with
honeycomb or oval pattern backer.
PART #
67-135
67-140
Oval
Honeycomb
Description
PRiCe/KiT
Grill kit with honeycomb backer
59.95
Grill kit with oval backer
59.95
Lower Radiator Vent Grill with Hood Hold Down
for 2008-10
Polaris RZR, RZR-S and RZR-4
This radiator vent grill with honeycomb pattern gives an awesome look while
providing a positive hold down for the hood.
PART #
67-139
22
PRiCe/KiT
59.00
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 23
Wheel Spacer Kits
for Polaris
RZR All Models except XP 1000
These wheel spacer kits allow you to widen your RZR for more stability when running high speed tight trails/roads or crawling over the
nastiest rock piles. It does so by giving you an additional 7/8” or 1
3/4” width per side (1 3/4” or 3 1/2” overall). These wheel spacers
utilize a locking ring (also known as Hub Centric) that fits precisely
into the wheel to provide maximum strength, durability and proper balance. This locking ring centers the
wheel in the spacer and by doing so places the majority of the stress on the wheel spacers themselves
rather than on the studs alone. They are manufactured from high quality billet
aluminum and are precision CNC machined to ensure perfect fit and proper balance. These wheel spacers
can be used on all RZR models with some limitations based on wheel offset and tire size, see our
recommendations below. Simple bolt on installation with no permanent modifications. Sold per pair.
7/8” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular
applications are RZR-S, RZR-4 and RZR XP 900 models to give them more stability. They also work great
on 50” RZR models if using larger than 26” tires or aftermarket wheels with more offset than stock (this is the
maximum width that can be used and still keep the tires from contacting the rear of the front fender well
when turning and going through the bumps). They also allow the use of 12” wide rear tires on stock wheels
without contacting the frame (50” RZR 800).
1 3/4” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most
popular applications are 50” RZR 800 models using 26” tires or smaller and stock offset wheels. This
provides the 50” RZR much more stability and they can be
PART # DeSCRiPTiON
PRiCe/PR
removed easily to return to stock width for running 50”
trails.
67-142 7/8” Wheel Spacer Kit
104.95
67-143 1 3/4” Wheel Spacer Kit
124.95
Sold per pair.
23
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 24
Fuel, Timing and Rev-Xtend Products
from DynoJet for Polaris RZR and Ranger
Power Commander V (PCV) and Power Commander Fuel Control (PCFC) are EFI tuning products that allow us to
create custom fuel maps for most popular SLP engine combinations. These products are cutting edge technology
allowing fuel maps to be created with pinpoint accuracy which results in improved throttle response, top end performance and fuel economy. They plug into the stock ECU and add or subtract fuel from the stock ECU settings.
The fuel maps are based on throttle position verses RPM with input points at ten different throttle positions and in
250 RPM increments. For the experienced tuner, these controllers come with a computer link cable and software
for custom mapping capabilities. Customers will choose to run either the PCV or PCFC based on desired features,
see descriptions below and on page 25.
Power Commander Fuel Control
The Power Commander Fuel Control (PCFC) system allows customers a low cost alternative to the Power Commander V (PCV). All
of the same fuel maps that are available from Starting Line Products for RZR models can be used in the PCFC system. The PCFC cannot be outfitted with optional
accessories such as Autotune, Wideband 2 and the LCD display; and the PCFC
does not have ignition timing control or Rev-Xtend capabilities like some of the
PCV models. Lower cost and simplicity are benefits of the PCFC, and where many customers are not using monitoring/tuning accessories, the options to do so are simply not necessary. The PCFC does have end user custom
fuel mapping capabilities
PART # DeSCRiPTiON
PRiCe
similar to the PCV.
70-159 2012-14 Polaris 570 RZR
249.00
70-160 2008-10 Polaris 800 RZR, RZR-S and RZR-4
249.00
70-161 2011-14 Polaris 800 RZR, RZR-S, XC and RZR-4
249.00
70-162 2011 Polaris RZR XP 900
249.00
70-163 2012-14 Polaris XP 900 RZR, RZR-4 and Jagged X
249.00
70-164 2013-14 Polaris XP 900 Ranger
249.00
70-165 2014 Polaris 1000 RZR
249.00
24
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 25
Power Commander V
The Power Commander V fuel controller gives you the ability to use a pre-programmed
SLP map or to create a custom map of your own. Many PCV models also allow ignition timing control and Rev-Xtend capabilities that provide a good horsepower improvement over
just controlling fuel alone. SLP has maps for most popular SLP engine configurations that
where applicable utilize timing control and Rev-Xtend. However, if you choose to make a
custom map for an engine configuration not supported by SLP, the PCV has the ability to
be outfitted with optional tuning/monitoring accessories such as Autotune, Wideband 2 and
the LCD display.
PART # DeSCRiPTiON
PRiCe
70-150 2012-14 Polaris 570 RZR (with ignition timing control)
399.95
70-124 2008-10 Polaris 800 RZR, RZR-S and RZR-4
379.95
70-151* 2008-10 Polaris 800 RZR, RZR-S and RZR-4
399.95
70-141* 2011-14 Polaris 800 RZR, RZR-S, XC and RZR-4
399.95
70-142* 2011 Polaris RZR XP 900
399.95
70-147* 2012-14 Polaris XP 900 RZR, RZR-4 and Jagged X
399.95
70-157 2013-14 Polaris XP 900 Ranger (with ignition timing control) 399.95
70-158 2014 Polaris 1000 RZR (with ignition timing control)
399.95
* Note: These models (part numbers 70-141, 70-142, 70-147 and 70-151) have the ability to manipulate
ignition timing and Rev-Xtend capabilities.
Power Commander Accessories for Experienced Tuners
SLP offers many tuning
aids to help experienced
tuners make their own
maps. Please inquire or visit
our website for more information.
PART #
DeSCRiPTiON
PRiCe
PART #
DeSCRiPTiON
PRiCe
PART #
DeSCRiPTiON
70-136
LCD Display
299.99
70-132
Wideband 2
499.00
70-126
Autotune
70-135
1GB SD Card
15.95
70-134
CAN Cable
17.00
PRiCe
279.99
25
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 26
Piston Kits
for Polaris
800/900 RZR Models
Is your engine getting tired, or are you just looking for some more performance out of it. We offer a variety of piston kits put the power back into your RZR or add some more. Increasing the compression
ratio will require better fuel quality. Inquire for more information.
PART #
02-100
02-101
02-102
02-103
02-104
DeSCRiPTiON
PRiCe
RZR 800 Models
10.2:1 Compression (stock ratio)
11:1 Compression
12:1 Compression
RZR 900 Models
10.6:1 Compression (stock ratio)
12.5:1 Compression
132.09
145.30
159.83
182.00
202.00
Piston Kits Contain: 1 piston, 2 circlips, rings and wrist pin.
(You must order 2 kits to do a complete engine).
Top end Gasket Kits
for Polaris
800/900 RZR Models
These gasket kits provide the necessary gaskets to do a top end rebuild. Please inquire for other
gaskets that you may need.
PART #
06-200
06-201
26
DeSCRiPTiON
2008-14 RZR 800
2011-14 RZR XP 900
PRiCe
72.78
85.66
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 27
ergonomic Grab Handle with Wrist Restraint
for
All 2008-11 Polaris RZR Models
This grab handle is built for comfort and safety! Its curved design
places hands in a natural position for a more comfortable ride for the
passenger. It features Wrist Restraints, which when used in conjunction with a seatbelt, keep hands positioned on or near the grab handle in the case of a roll over. The adjustable straps allow these
restraints to be used by adults or children. The natural tendency in a
roll over situation is to let go of the grab handle and put your hand out
to catch the vehicle. When using these restraints, the passenger is
reminded to keep their hands firmly planted on the grab handle.
PART #
67-116
DeSCRiPTiON
Ergonomic Grab Handle with Wrist Restraint for 2008-11 models
PRiCe/KiT
79.00
Wrist restraints must only be used in conjunction with a seatbelt.
Wrist Restraint for All Polaris RZR Models
Wrist Restraints will keep hands positioned on or near the passenger grab
handle in the case of a roll over. The adjustable straps allow these
restraints to be used by adults or children. The natural tendency in a
rollover situation is to let go of the grab handle and put your hand out to
catch the vehicle. When using restraints, the passenger is reminded to
keep their hands firmly planted on the grab handle.
PART #
67-115
DeSCRiPTiON
Wrist Restraint Only for All 2008-14 models
(only works with stock grab bar)
PRiCe/KiT
14.99
27
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 28
ergonomic Grab Handle with Wrist
Restraint and 3/8” Drive Adapter
for
Polaris 2012-14 RZR Models
This new grab handle fits the square insert in the 2012-14 RZR models. Its
curved design provides a much more comfortable hand position for the passenger. It features Wrist Restraints, which
when used in conjunction with a
seatbelt, keep hands positioned on or
near the grab handle in the case of a roll
over. The adjustable straps allow these
restraints to be used by adults or
children. The natural tendency in a roll
over situation is to let go of the grab
handle and put your hand out to catch
the vehicle. When using these restraints, the passenger is reminded to keep
their hands firmly planted on the grab handle.
This new grab handle also features a 3/8 inch drive adapter. This allows it to
accept any 3/8 inch drive sockets so you don’t have to carry a lot of extra tools which can be heavy
and bulky. The most common use for it is as a lug wrench. Simply add a proper size socket to your
tool kit and you can tighten or loosen your lug nuts with this tool.
PART #
67-184
DeSCRiPTiON
Ergonomic Grab Handle with Wrist Restraint and 3/8” Drive Adapter
Wrist restraints must only be used in conjunction with a seatbelt.
28
PRiCe/KiT
84.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 29
Stock Vent Pre-Filter Kit
for Polaris RZR XP 900 RZR/RZR-4 and Jagged X
These pre-filter vent kits help eliminate dirt and
other heavy particles from getting into the intake
for prolonged air filter life and into the clutches
for longer clutch life. It replaces the stock foam
and vent cover and provides more intake surface area. Utilizes a special pre-filter material
that repels water and dirt, yet maintains high
airflow. Kit includes a pre-filter vent for both the
engine and clutch intakes as
PART # DeSCRiPTiON
well as rivets for installation.
67-154 Air Intake & Clutch Pre-Filter Vent Kit
PRiCe
59.95
Note: Pre-Filter Vents can be purchased individually please inquire
High Flow intake Kit
for Polaris RZR 900 XP RZR/RZR-4 and Jagged X
This kit delivers a substantial increase in airflow to the intake
of the Polaris RZR 900 XP. The additional airflow provides
better throttle response, quicker acceleration and better topend power. It is highly recommended that this kit be run in
conjunction with an SLP Performance Slip-On Muffler and
Power Commander V. The use of an SLP Clutch Kit is also
recommended. See dyno chart
PART #
PRiCe/KiT
on page 8.
67-151
49.95
29
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 30
intake Grate for Polaris RZR 570
Let it breathe! This intake grate replaces the stock intake grate
and foam on the Polaris RZR 570. It utilizes our pre-filter material that repels water and helps keep dirt out of the air filter
and clutch area to maintain optimum PART # PRiCe/PAiR
performance.
14-316
44.95
Hot Air eliminationв„ў Kit
for 2011-14 Polaris XP 900 RZR/RZR-4/Jagged X
This kit helps reduce stagnant hot air given off by the engine
and headers by allowing hot air escape from under the bed.
Kit includes a vent and mounting hardware.
PART #
67-153
PRiCe/PAiR
29.95
Clutch Vents for Polaris 2008-14 800 RZR, RZR-S and RZR-4
These clutch vents are installed into the clutch cover to allow more air to flow into the clutch
enclosure to reduce clutch and belt heat and help maintain proper
performance. It utilizes a special pre-filter material that repels
water and keeps dirt out yet maintains high airflow.
Sold in a set of 2 vents.
30
PART #
67-108
PRiCe/PAiR
49.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 31
Forced Air Hot Air eliminaton Kit
for Polaris 800/900 RZR/RZR-4 Models
67-168 Pictured
This new Hot Air Elimination kit utilizes a high volume fan and a thermostat to purge the hot air out from under the bed of the RZR. This reduces
the chance of plastic damage to the bed and rear cab area when running
on those hot summer days. It also keeps the top of the bed cooler,
reducing the heat transferred through to your precious cargo items.
The system is all automatic, and when the master switch is on, the thermostat monitors the temperature and turns the high volume fan on when the temperature reaches a
certain point. After the temperature has been reduced the fan automatically turns off.
Pre-wired harness for easy installation.
PART # DeSCRiPTiON
67-159 RZR 800 Models
67-168* RZR 900 Models including Jagged X
PRiCe
199.95
249.95
*Will not fit 2011 or any model with external oil tank.
Rapid Response В® Replacement Drive Clutch
for Polaris 800/900 RZR and Ranger XP
This new clutch features oversized rollers and weight pockets for additional
strength and durability to better withstand the abuse that the RZR/Ranger can
dish out. It allows the use of SLP MTXв„ў, Polaris or Rooster Weights. Clutch does
not come with weights or spring. This clutch has an idler bearing but is not a full
EBS functioning primary.
PART # DeSCRiPTiON
PRiCe
50-500
50-501
RZR 800 and Ranger XP
RZR 900 Models
429.00
429.00
31
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 32
Clutch Kits for Polaris RZR
SLP clutch kits have been designed and tested to get the most consistent performance out of your Polaris UTV. We have been working with centrifugal clutches for
over 40 years, and know how to tune them to transfer your horsepower to the
ground. In most cases, optimizing the clutch setup is the best performance gain for
the dollar spent. Through our testing we have found two distinctly different clutch
setups depending on what type of terrain that you drive on.
SLP Trail Clutch Kit:
These clutch kits are designed for semi hard surface trails with the occasional run
in muddy or sandy conditions. They provide improved engagement mannerism,
throttle response with better top-end power and consistency over a broad range of elevations and conditions.
SLP Sand, Mud or Large Tire Clutch Kit (High Load):
These clutch kits are for high load environments such as sand, mud or when 1" to 2" larger tires have been
added. When exposed to these high load conditions, the stock clutching performs poorly, leaving the vehicle
with poor throttle response and loss of RPM. These clutch kits provide improved engagement mannerism,
throttle response with better top-end power and consistency over a broad range of elevations and conditions.
Note: If performance modifications, larger tires (+3" or larger), paddle tires, or weight has been added or
removed from your UTV, please let us know so we can tailor your clutch kit accordingly.
Tech Tip:
A question we often hear is, “What RPM should I
expect my RZR to run at wide open throttle?” This
depends on the RZR you have. The following chart
shows you where we like to rev the different RZR
engines at wide open throttle (WOT) as well as
where their REV-Limiters are.
32
2012-14 RZR 570
Stock exhaust
Configuration
Header
Descritpion
WOT RPM
ReV Limit
6800-7200
7750
2008-10 Standard RZR 800
2 into 1 Manifold 6200-6400
6500
2009-14 RZR-S/RZR-4/XC 800
Header
6300-6500
6750
2011-14 Standard RZR 800
Header
6300-6500
6750
2011-12 RZR/RZR-4 900 XP
Header
8000-8400
8750
2013-14 RZR/RZR-4 900 XP
Header
8000-8300
8450
2013 Jagged X
Header
8100-8500
8800
2014 RZR XP 1000
Header
8100-8400
8800
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 33
Clutch Kits for Polaris 570/800/900/1000 RZR and Ranger 900
elevation
Description
Model
2012 RZR 570
2013-14 RZR 570 with Factory EBS
2013-14 RZR 570 non EBS
2008 Standard RZR 800*
0-4500’
0-4500’
Sand, Mud or
Trail Kit
Larger Tires
Part #
Price
Part#
Price
570 RZR Models
41-722
576.90
--41-723
302.95
--41-724
576.90
--800 RZR Models
41-700
245.30
41-800 245.30
4500’ +
Trail Kit
Part #
Price
41-722
41-723
41-724
579.90
302.95
579.90
4500’+
Sand, Mud or
Larger Tires
Part#
Price
----
----
41-701
245.30
41-801
245.30
41-716
41-702
494.30
489.05
41-816
41-802
494.30
489.05
41-717
41-703
494.30
489.05
41-817
41-803
494.30
489.05
41-708
489.05
41-808
489.05
41-709
489.05
41-809
489.05
41-720
215.10
41-820
215.10
41-721
215.10
41-821
215.10
41-714
240.05
41-814
240.05
41-715
240.05
41-815
240.05
41-704
41-710
41-706
489.05
41-804
489.05
41-810
489.05
41-806
900 RZR Models
327.90
41-818
327.90
41-812
327.90
41-725
1000 RZR Models
302.95
Inquire
900 Ranger
223.95
--
489.05
489.05
489.05
41-705
41-711
41-707
489.05
489.05
489.05
41-805
41-811
41-807
489.05
489.05
489.05
327.90
327.90
327.90
41-719
41-713
41-725
327.90
327.90
327.90
41-819
41-813
41-825
327.90
327.90
327.90
TBA
41-728
302.95
Inquire
TBA
--
41-727
223.95
--
--
2009 Standard RZR 800*
2010 Standard RZR 800*
2011-14 Standard RZR 800*
except 2013 LE with Factory EBS
2013 Standard RZR 800 LE with
Factory EBS
2009 RZR-S 800
2010 RZR-S 800
2011-14 RZR-S 800
2010-14 RZR-4 800
2012-14 RZR-4 900
2011-14 RZR 900
2013 Jagged X
41-718
41-712
41-725
2014 RZR 1000
41-728
2013-14 Ranger 900
41-727
2008 and 2009 Standard RZR 800 models require shimming for proper belt clearance. Shims and instructions included.
All clutch kits require use of Polaris OeM Belts: RZR 570 - #3211143, 800 - #3211162, 900 - #3211148, 1000 - #3211148
and Ranger XP 900 #3211149 . Using any other belt may require additional tuning from the end user.
33
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 34
TeAM Tied Driven Clutch for Polaris RZR
This secondary clutch allows you to change helixes and springs to get the most
performance out of your RZR. The stock secondary clutch that comes on the
2009 and newer Standard RZR as well as 2010 and newer RZR-S, 800 RZR-4
and the 2012-14 570 RZR (except 570/800 models with factory EBS) is an inexpensive model that has the helix cast into the moveable sheave of the clutch.
Changing to the TEAM Tied allows you to use a helix that is more suitable to your
RZR's setup and typical riding conditions as well as giving you a stronger more
durable clutch. Sold as a complete assembly less helix and spring.
For a custom SLP recommendation that is specific to your combination, please call or e-mail ([email protected]) an SLP
representative and have the following information available: elevation you typically ride at, conditions you plan on
riding in (i.e.: sand, snow, mud or typical PART # DeSCRiPTiON
PRiCe/eA.
trail), tire size, engine modifications that
50-303 2012 570 RZR Models
249.00
add power, and the weight you have
50-304
2013-14
570
RZR
Models
249.00
added to your vehicle. Clutch kits
50-301 800 RZR Models
249.00
available for most popular
50-303 900 XP Replacement Clutch (except Jagged X) 249.00
applications, see pages 33.
Driven Clutch Alignment Shims
for
Polaris 800 RZR
Clutch alignment on the Polaris RZR is extremely important. If the drive and driven clutch are
not properly aligned, the RZR can exhibit drive clutch drag or hard shifting between gears at
idle speed. When properly aligned, the belt should ride equally between the stationary and
movable sheave of the drive clutch. These shims which can PART # DeSCRiPTiON
PRiCe/eA.
be added or taken away from behind the secondary clutch
40-430 .030” Shim
0.63
will allow for correct clutch alignment. Sold per each.
40-431 .060” Shim
0.57
34
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 35
SLP MTXв„ў Clutch Weights
for Polaris
800 RZR
SLP's MTX™ Clutch Weights harness the horsepower of your RZR, RZR-S, XC and
RZR-4 by transferring it more efficiently to the wheels. Their unique heavy heel and
special weight profile provide substantially greater shift force, delivering improved
acceleration and top speed. Other benefits include smoother engagement and very
responsive back shift. Adjustable by adding weight via rivets (up to 6 grams per
weight), this weight offers precise tuning ability for your application.
RePLACeMeNT TUNiNG RiVeTS,
Please inquire for recommendations. Sold per set of 3 including
PACKAGe OF 6
tuning rivets (6 - 1 gram, 6 - 2 gram and 6 - 3 gram rivets).
PART # MATeRiAL WeiGHT PRiCe/SeT
PART #
WeiGHT
PRiCe/SeT
40-90 aluminum 1 gram
10.95
40-129
62 gram
109.95
steel
40-91
2 gram
10.95
40-130
65 gram
109.95
steel
40-92
3 gram
10.95
Rivet Set/Removal tool see page 42.
2008-09 Standard RZR requires reshimming.
Rooster Adjustable Shift Weights for Polaris 570,
900 RZR/RZR-4 & Jagged X, XP 1000 and XP 900 Ranger
Get the horsepower to the ground with our adjustable Rooster Weights! They allow
you to add the included bolts and washers to the weights at three different positions,
the heel, center, and tip of the weight, to fine-tune your clutching. They are adjustable with included bolts and washers. This kit utilizes two different thicknesses of
washers and three different weights of bolts for the ultimate in
adjustability. Inquire for recommendation.
PART #
40-137
40-131
40-142
DeSCRiPTiON
570 Rooster Adjustable Shift Weights (44-60 grams )
XP 900/1000 Rooster Adjustable Shift Weights (52-74 grams)
XP 900/1000 Rooster Adjustable Shift Weights (61-81 grams)
PRiCe
199.00
199.00
199.00
35
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:52 PM Page 36
Drive Spring for Polaris RZR and XP 900 Ranger
These high quality clutch springs are offered in a variety of spring rates to allow
you to optimize the shift characteristics of your drive clutch. Things such as elevation and tire size can have a dramatic effect on the performance of your RZR. Ask
a representative for more information regarding your specific application.
Part #
Color
40-405
40-404
40-400
40-406
40-401
40-402
40-403
Red
Red
Red
Red
Red
Red
Red
Stripe Color Compression Rate- Pounds
@2.25”
@1.25”
Silver/Purple
43
175
Gold
55
175
Gold/Black
55
225
Yellow
56
140
White/Black
65
245
Green/Black
75
260
Gold/Silver
105
260
Price/ea.
24.95
24.95
24.95
24.95
24.95
24.95
24.95
Driven Spring for Polaris RZR and XP 900 Ranger
This high quality clutch spring allows you to optimize the shift characteristics of
your driven clutch. Things such as elevation and tire size can have dramatic effect
on the performance of your RZR. Ask a representative for more information regarding your specific application.
Part #
40-420
40-421
36
Color
Compression Rate- Pounds
@2.05”
@1.05”
Red
105
165
Lime Green/ Silver
125
190
Price/ea.
24.95
24.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 37
Driven Clutch Helixes
for
Polaris RZR
These helixes make the RZR more responsive in all conditions and are much less prone
to RPM and top-end power loss in higher load conditions (sand, snow, mud etc.) as well
as at higher elevations or when running larger, more aggressive tires.
eBS Helixes have a less aggressive EBS notch than the factory helixes and when
used on 570/800 models with factory EBS or all RZR XP 900/1000 models, they
will reduce the aggressive nature of the stock Engine Braking System.
Non-eBS Helixes are made without an EBS notch and when used on 570/800 models
with factory EBS and all RZR XP 900/1000 models will let the RZR freewheel more readily
than stock. These helixes are a good combination for customers that want less engine
holdback when off the throttle in sand, most racing applications or jumping long distances.
Non-EBS helixes are not recommended for trail use as engine holdback is greatly
reduced.
EBS Helix
Non-EBS Helix
Note: Many RZR models came with a clutch that had the helix cast into the moveable sheave. On these models,
the helix is non-replaceable (2009 and newer Standard RZR as well as 2010 and newer RZR-S, 800 RZR-4 and
2012-14 RZR 570 (except 570/800 models with factory EBS). These models must use the TEAM Tied Clutch
(see page 34) in order to change the helix.
eBS Helixes
PART #
50-302*
50-330
50-335
DeSCRiPTiON
52 Straight
54 Straight
66-56.33
Non-eBS Helixes
PRiCe/eA.
79.00
79.00
79.00
PART #
50-332
50-336
DeSCRiPTiON
54 Straight
66-56.33
PRiCe/eA.
79.00
79.00
*Will not fit 570 RZR, 900 XP RZR/RZR-4/Jagged X or RZR 1000.
37
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 38
eBS (engine Braking System)
for 2008-14 Polaris 800 RZR, RZR-S, RZR-4, XC and 2012-14 570 RZR
Are you sick of your RZR “running away” when you come down a steep decent? Upgrade to an EBS (Engine
Braking System) in conjunction with an SLP Clutch Kit to maximize the use of your engine
holding you back rather than just the use of your brakes.
Benefits include:
• Improved Engine Braking
• Improved Downhill Descent Control
• Reduced Brake System Wear
RZR 800 models will require the stock primary clutch and Tied Secondary
Clutch to be sent to SLP for modification. RZR 570 models will require the
stock primary clutch to be sent to SLP for modification.
* Price includes EBS bearing and labor for clutch modifications.
An eBS cut helix is required for proper operation and is not included in the SLP eBS Kit. SLP Clutch
Kits come with an EBS cut helix, refer to page 37 for more information.
Note: When installing the EBS Kit on a used clutch, other serviceable parts can be worn out and will need to
be replaced. Prior to the EBS Kit installation, our technicians will inspect your clutch and contact you with an
estimate if any repairs are required.
DeSCRiPTiON
PRiCe/eA.
EBS Kit for 2012-14 RZR 570 Models
91.97
NOT for use on Rapid Response Replacement
EBS Kit for 2008-09 RZR 800 Models
159.97
Drive Clutch.
EBS Kit for 2010-14 RZR 800 Models
91.97
38
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 39
High Strength Spider insert
for
Polaris 900/1000 RZR Driven Clutch
This cast steel insert is machined and heat treated for strength and
durability. It replaces the weaker powder medal insert that comes
stock in RZR 900 and 1000 OEM secondary clutches. It is more than
twice the strength of the factory piece.
PART #
50-338
DeSCRiPTiON
High Strength Spider Insert
PRiCe
35.00
SLP Clutch Press Tool
The SLP Clutch Press Tool has been widely accepted as the most efficient clutch
compression tool available. This revolutionary drive and driven clutch servicing
tool is designed specifically for compressing and holding springs for ease of assembly and disassembly. This tool is specified in many factory repair manuals as
a required specialty tool for clutch compression. Wrestling with the clutch or need
for a second person to help is now history. Made compact, the SLP tool can be
used for field testing or production clutch repair on the shop bench. High quality metal construction with powder
coated finish provides a quality, functional tool that is extremely durable. This design incorporates adjustable
stand-offs that can be moved in and out to
PART # DeSCRiPTiON
PRiCe/eA.
allow proper fit for many different clutches.
20-204 Polaris Drive/Driven Clutches (Including ATV,
99.95
P2, TEAM Rapid Reaction and Tied Clutches)
*Will not work on 2013-14 570 RZR Driven Clutch.
39
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 40
Spring Compressor
Compress and change RZR and Ranger driven clutch
springs safely and easily with this spring compression tool.
Designed to be used in a vise or bolted to a table.
PART #
20-173
PRiCe/PAiR
79.00
Drive Clutch Pullers for Polaris 570/800/900/1000 RZR
and Ranger XP 900
These clutch pullers are designed to pull even the toughest of
clutches. Made of high quality heat treated material, these
tools are built to last.
PART #
20-207
20-136
DeSCRiPTiON
570 RZR and 800 RZR, RZR-S, RZR-4 and Rapid Response Clutch (#50-500)
RZR/RZR-4 XP 900, Jagged X, XP 1000, Ranger XP 900
and Rapid Response Clutch (#50-501)
Have you seen PowerSports Adventures?
This season we have teamed up again with the television show PowerSports Adventures as their title sponsor. Every episode combines motorsports action with outdoor
recreation while showing some of the latest products for your RZR in action. If you
haven’t taken the opportuninty to see this show we encourage you to tune in and
watch the next episode. It can be found on the Altitude Sports and Entertainment,
TUFF TV and Wild TV . PowerSports Adventures can be seen all across the US and
Canada as well as 10 European Countries, check your local listings.
Visit our website (www.startinglineproducts.com)
and click on the PowerSports Adventures link to
learn more or to watch previous episodes.
40
#20-207
#20-136
PRiCe/eA.
34.95
36.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 41
Drive Clutch Spider Tool
for All Polaris 570/800/900/1000 RZR
and Ranger XP 900
This Spider Tool allows the spider assembly in the drive clutch to be removed and assembled in order to service the rollers and buttons. It is made of high quality steel to precise
specifications, allowing you to remove or install even the most stubborn spiders easily.
Not for Rapid Response Primary Clutch.
PART #
PRiCe/eA.
20-75
49.95
Drive Clutch Spider Nut Tool for Polaris 900/1000 XP
This spider nut tool was specifically designed to remove the jam nut that locks the
spider into place on the XP 900/1000 RZR/RZR-4 and
PART #
PRiCe/eA.
Jagged X. Not for Rapid Response Primary Clutch.
20-214
41.95
Cam Arm Bushing Replacement Tool
This precision manufactured tool allows you to easily replace weight bushings
without damaging the weight or bushing. This tool works to replace worn bushings on Polaris, SLP MTXв„ў or Rooster Weights.
PART #
20-216
40-28
40-200
20-12
40-134
DeSCRiPTiON
Bushing Tool for Polaris, MTXв„ў & RZR 570 Rooster Weights
Replacement Bushing/ ea. for Polaris, MTXв„ў & RZR 570 Rooster Weights
Replacement Bushings, 3 pack for Polaris, MTXв„ў & RZR 570 Rooster Weights
Bushing Tool for Rooster Weights on RZR XP 900/1000 and Ranger XP 900
Replacement Bushings, 3 pack for Rooster Weights on RZR XP 900/1000
and Ranger XP 900
PRiCe/eA.
9.95
6.00
17.00
12.95
25.00
41
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 42
Spider Rebuild Tool for Polaris RZR 570/800
and Ranger XP 900
The best and simplest tool for removing pin and roller from Polaris spider. Selfaligns, removes, aligns new parts (including shims), and installs new pin. No vise
needed. Not for Rapid Response Clutch.
PART #
20-85
PRiCe/KiT
29.95
MTXв„ў Rivet Set/Removal Tool
This tool allows you to fine tune your MTXв„ў Weights quickly and easily by
setting or removing rivets. Specifically designed to be used in the field (but
can be clamped in a vise for shop use) it is compact and lightweight, yet
robust enough to be used time and time again.
PART #
PRiCe/eA.
20-155
52.95
Heavy Duty Flywheel Puller
for ALL 2008-14 800 RZR Models
Pull those tough flywheels with ease with this SLP built puller. Strong and built to last
for years. This puller is designed with specially shaped slots for the 800 RZR. Puller
includes high quality grade 10.9 bolts, six 6mm and four 8mm.
PART # PRiCe/PAiR
20-205
42
64.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 43
Drive Clutch Holding Fixture
for
Polaris RZR and Ranger XP 900
This Drive Clutch Holding Fixture can be bolted to a bench or clamped in a vise for
solid holding of drive clutch for spider removal when shimming for belt-to-sheave
clearance or servicing the spider. It contacts all clutch webs for maximum support to
eliminate clutch web damage. Features a quick spin thumb nut with knurled edge for
superior grip and center hold down for much greater holding stability while applying
off center torque.
Will work on Rapid Response Primary Clutch.
PART #
20-162
PRiCe/KiT
79.95
Clutch Holding Tool
This premium tool offers the proper method to
hold the drive clutch from rotating while removing or torquing clutch center bolt or when using
a clutch puller. Unlike other clutch holding tools
that are laser cut, this tool won’t hardmark or
damage clutch, making it a far superior tool. It
also features a cushion grip for comfort. This tool is a must for quick and easy
clutch removal.
PART #
20-202
DeSCRiPTiON
Polaris RZR and Ranger XP 900
PRiCe/eA.
34.95
Will not hard mark
clutch like
other tools.
Not for Rapid Response Primary Clutch.
43
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 44
Belt Removal/Clutch Compression Tool
Polaris 570/800 RZR with TEAM Tied Clutch, All
10 3/8” Long x 1” Diameter
RZR 900, and RZR 1000
for
This tool makes belt removal and replacement a breeze.
Machined from billet aluminum for strength and durability,
this tool has a specially shaped end that cams over when
fully engaged in the driven clutch. This allows the tool to remain engaged in the clutch (compressing the clutch) while
the old belt is removed and the new belt is replaced. Also, this tool has a wide footprint
and because it is made from aluminum it doesn’t tend to mar the clutch in the contact area
like other tools used for this purpose.
Unique shape with
cam over design.
On the opposite end, this tool has a wedge shape that allows its use to compress the drive clutch (with belt
removed). It is intended to be used in conjunction with our sheave clamp tool (part# 20-161). Simply compress the drive clutch, slide the sheave clamp tool across the sheaves and release the spring pressure onto
the sheave clamp tool. Now you can easily change or service the drive clutch weights, or inspect the roller
condition without
PART # DeSCRiPTiON
PRiCe/eA.
having to remove the
20-217 Belt Removal/Clutch Compression Tool
26.00
clutch from the ma20-302* Belt Removal/Clutch Compression Tool with Sheave Clamp Kit
34.95
chine or spring from
*Part
#20-302
includes
#20-217
and
#20-161.
the clutch.
Sheave Clamp Tool for Polaris RZR and Ranger XP 900
The sheave clamp tool holds the moveable sheave of the drive clutch in
place when collapsed for changing clutch weights without removing outer
cover or clutch from crankshaft. An absolute must for PART #
PRiCe/eA.
field tuning. Will work on Rapid Response Clutch. 20-161
8.95
44
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 45
extension Spring Hooks
Special tool made for installing and removing all
exhaust system springs or any spring that requires a
pull to release. Made of stainless steel for strength
and rust resistance.
SiZe
4”
6”
8”
12”
PART #
20-89
20-90
20-183
20-210
PRiCe/eA.
10.95
11.50
11.95
12.95
Voltage Meter
Monitor your battery voltage with this digital volt meter. We have found that
when running high draw accessories continuously, such as winching out of a
tough spot, the battery can be drawn down to the point that if you shut off the
engine, there is not enough power left to restart it.
PART #
PRiCe/eA.
When the voltage is lower than 11.5 volts, the screen
19-113
39.95
will flash to warn you.
Miniature Water Temperature Gauge
Monitor water temperature easily with these miniature
gauges. The gauge can be set to read in either Fahrenheit or
Celsius. It registers the current temperature and records
maximum temperature. The display can be mounted either
with its Peel-N-Stick backing or bolted on. Comes standard
with either a ¾” or 1” hose splice adapter.
PART # DeSCRiPTiON
19-103 3/4” (19mm) Hose I.D. Size
19-104 1” (25mm) Hose I.D. Size
Polaris RZR uses 1” hose
PRiCe/eA.
44.95
44.95
45
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 46
Tool Bag
Handy roll-up style bag holds enough tools for trail riding or racing,
and includes a zipper pouch for small tools.
PART #
46-52
PRiCe/eA.
20.00
Tools not included
SLP Team Hats and Beanie
This attractive hat features a 3D embroidered SLP logo on the front of the hat with
EST. 1972 on the brim. Adjustable rear closure for one size fits most.
This hat was designed with the hot summer months in mind. It utilizes a
lightweight breathable fabric shell with a moisture wicking band to provide excellent comfort even on the hottest days. Adjustable rear closure
for one size fits most.
For those cold days try one of our SLP
Beanies. Lined with Thinsulateв„ў insulation to keep your head and ears warm
and comfortable.
46
PART #
60-61
60-58
60-62
60-49
DeSCRiPTiON
PRiCe/eA.
Black Hat
24.95
Summer Grey Hat
24.95
Beanie - M to L
19.95
Beanie - XL to XXXL
19.95
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 47
# 60-55
# 60-57
# 60-60
SLP Decals
Our SLP Logo is on high quality 3M Transfer material which is great for
your RZR, truck or trailer.
PART #
60-41
60-60
60-12
60-55
60-8
60-9
60-57
DeSCRiPTiON
2-1/4” x 1-1/4” Logo, per each
3 1/4” x 5 3/8” Logo, per each
7” x 3” Logo, per each
7 1/2” x 3 1/2” Oval Logo
11 1/2” x 4” Logo, per each
18” x 9 1/2” Logo, per each
39” x 18” Oval Logo
PRiCe/eA.
.22
.80
.95
.95
3.00
7.29
25.95
# 60-12
# 60-8
# 60-9
iNDeX
AutoTune
Beanie
Belt Removal Tool
Billet Shifter Handle
Brake Pedal Cover
Bushing Tool
Cam Arm Bushings
Clutch Compression Tool
Clutch Holding Fixture
Clutch Holding Tool
Clutch Kits
Clutch Press Tool
Clutch Puller
Clutch Shim
Clutch Vent
Clutch Weights
Decals
Door Graphics
Door Seal Kit
Doors
D-Rings
Drive Clutch
25
46
44
17
18
41
41
44
43
43
32-33
39, 40
40
34
30
35
47
4
4
3
21
31
Drive Spring
Driven Helix
Driven Spring
Engine Braking Kit (EBS)
Flag
Flag Mount Kit
Flag Pole
Flywheel Puller
Forced Air Kit
Front Bumper
Front Bumper Support
Front Lower A-Arms
Front Skid Plate
Gas Pedal Cover
Gas Tank Armor
Gasket Kit
Glove Box
Grab Handle
Hat
Helix
High Flow Intake
Hitch Receiver
36
37
36
38
14
14
14
42
31
11, 12
10
17
12
18
6
26
18
27-28
46
37
29
19
Hood Grill Vent
Hot Air Elimination Kit
LCD Display
MTX Clutch Weights
MTX Weight Tool
Mud Guard
Muffler 1000
Muffler 800
Muffler 900
PCFC
PCV
Piston Kit
Power Commander
Radiator Vents
Radius Rods
Rapid Response Clutch
Rear Bumper
Rocker Armor
Rooster Weights
Secondary Clutch
Secure Storage Box
Sheave Clamp Tool
22
30-31
25
35
42
6
10
7
7
25
25
26
24-25
22
16
31
13
5
35
34
18
44
Shifter Handle
Shock Spring Kit
Silencer 1000
Silencer 800
Silencer 900
Spider Insert
Spider Nut Tool
Spider Rebuild Tool
Spider Tool
Spring Hook Tool
Stinger Kits
Stock Vent Pre-Filter
Street Legal Kit
TEAM Tied Clutch
Tool Bag
Trailing Arm Guards
Trailing Arms
Voltage Meter
Water Temp Gauge
Wheel Spacer Kits
Wideband 2
Wrist Restraints
17
15
10
7
7
39
41
42
41
45
19-21
29, 30
15
34
46
15
16
45
45
23
25
27
47
2013 RZR Catalog version 13-2_Layout 1 2/24/2014 6:53 PM Page 48
Change Service Requested
743 E. Iona Rd. Idaho Falls, ID 83401
(208)529-0244, www.startinglineproducts.com
PRSRT STD
U.S. POSTAGE
PAID
PERMIT NO. 96
IDAHO FALLS, ID
For more information about these products
or to place an order, please contact:
Starting Line Products (208)529-0244
www.startinglineproducts.com
Scan this code with your smart
phone and you will be directed to
the UTV section of our website.
Document
Category
Real Estate
Views
167
File Size
8 807 KB
Tags
1/--pages
Report inappropriate content