VX-1 WI RE D CONTR OLLER PC SET UP MODEL VX1PS3-21 VX-1 PC SET UP 1. Plug the cable from your VX-1 Wired Controller into a USB Port on PC. The driver will be installed automatically. PC PC 2. Channel 1 LED on the controller will illuminate. The controller is now ready to use in “Digital mode”. Digital mode 3. Press the Home Button to switch from Default “Digital Mode” to “Analogue Mode”. Analogue mode 4. To check/change the default key mapping and functions, go to: Control Panel > Devices and Printers > Settings > Gioteck PS3 Wired Controller > Properties. VX-1 KEY MAPPING & FUNCTIONALITY USB (PC) Function # Function Digital Mode Analogue Mode PS3 Function 1 LED 1 ON ON PS3 Channel 1 LED 2 LED 2 OFF ON PS3 Channel 2 LED 3 LED 3 OFF OFF PS3 Channel 3 LED 4 LED 4 OFF OFF PS3 Channel 4 LED 5 MODE MODE Button MODE Button PS Button 6 Fire Button 1 1 1 Fire Button 2 2 2 Fire Button 3 3 3 Fire Button 4 4 4 ✕ Dpad - UP Left VR Up POV_UP UP Dpad - Right Left VR Right POV_RIGHT RIGHT Dpad - Down Left VR Down POV_DOWN DOWN Dpad - Left Left VR Left POV_LEFT LEFT Left 3D Stick - X Axis Left 3D Stick - X Axis Left 3D Stick - X Axis Left 3D Stick - X Axis Left 3D Stick - Y Axis Left 3D Stick - Y Axis Left 3D Stick - Y Axis Left 3D Stick - Y Axis L3 11 11 L3 Right 3D Stick - X Axis Fire Button 2 and 4 Right 3D Stick - X Axis Right 3D Stick - X Axis Right 3D Stick - Y Axis Fire Button 1 and 3 Right 3D Stick - Y Axis Right 3D Stick - Y Axis R3 12 12 R3 10 START 10 10 START 11 SELECT 9 9 SELECT 12 R1 6 6 R1 13 R2 8 8 R2 14 L1 5 5 L1 15 L2 7 7 L2 7 8 9
© Copyright 2024 Paperzz
