RECIP-TRAP 9260 В® Portable Analyzer A comprehensive asset management tool for reciprocating and rotating plant machinery. The RECIP-TRAP 9260 system includes a multi-channel analyzer and the RTwin 9.2 software suite. This allows you to collect and analyze technical and economic measure of performance and mechanical condition in order to make asset management decisions that will increase your profitability and mitigate risk. RTwin 9.2 This system couples the durability, reliability and precision of the RECIP-TRAP 9260 analyzer with our RTwin 9.2 software suite, long recognized as the world's leading reciprocating machinery diagnostic software. RECIP-TRAP 9260 This portable, rugged, 4-channel device comes complete with the accessories, transducers, cables and software needed to analyze and evaluate the mechanical condition and performance of power cylinders, compressors, and auxiliary equipment. The RECIP-TRAP 9260 weighs just 7.3 lbs., is EMI/RFI resistant, and has been re-designed to include a sunlight visible VGA screen. Through the use of accelerometers, ultrasonic sensors, the patented water-cooled Aqua-Probe, and an IR temperature wand; the RECIP-TRAP 9260 simultaneously measures, displays and stores data in real time. Once stored, the data can be viewed in whatever level of detail you need while still on the machine. Allowing you to verify data integrity and ensure all anomalous events have been captured. RTwin 9.2 provides benchmarks for your operation and highlights areas for potential improvement through extensive data comparisons and statistical analysis such as: вЂў Cycle-to-cycle pressure variations вЂў Statistical analysis of ignition secondary and power cylinder вЂў вЂў вЂў вЂў вЂў peak firing pressure (ECR) Cylinder-to-cylinder variations in vibration and pressure Current-to-baseline comparisons of pressure, vibration, ultrasonic and spectra Theoretical-to-actual comparisons of compressor pressure vs .time and pressure volume Population based comparisons Spectrum analysis: snapshot explorer, fault-finder, cascade spectrum, and statistical process control (SPC) DYNALCO strategic asset management solutions KEY MEASURES Phased static (DC) pressure: from a patented, watercooled AQUA-PROBE. Available in pressure standard ranges: вЂ“14.7 to +5000 psi (вЂ“1.0 to +345 bar) or вЂ“14.7 to +1250 psi (вЂ“1.0 to +86.2 bar); custom pressure ranges are also available. Phased vibration: low (1 Hz to 8 kHz), standard (5.6 to 44 kHz), mid (180 Hz to 8 kHz) high (15.6 kHz to 44 kHz). Phased ultrasonics: 36 kHz to 44 kHz. Infrared skin temperature: вЂ“20В°F to 2400В° (вЂ“29В°C to +1316В°C). 12 push buttons: power, start, menu, scale, zoom, testpoint, testpoint group, forward, backward, escape and two trap buttons. Ports: 4 data input ports; 1 multiвЂ“purpose port accepts input from marker, charger, communication, and IR temperature; and 1 BNCвЂ“out port for output to timing light. BETA-LINK receiver: receives marker signal from BETALINK transmitter. Communication: up to 115k baud data transfer. Phased ignition primaries: primary AC (вЂ“10 to +10 V) or DC (вЂ“10 to +10 V) waveform analysis. Phased ignition secondaries: ignition timing and level statistics (based on 100 cycles) and waveform analysis. Rod motion (optional): input from proximity probes (200 mV/mil) produces phased rod position waveforms. Phased conventional vibration: displacement (0 to 100 mil), velocity (0 to 8.00 ips), and acceleration (0 to 50 g). Conventional vibration: time- and frequency-based (3 Hz to 20 kHz) true peak, RMS, pseudo-peak, displacement, velocity and acceleration. Rolling element bearing defect energy acceleration (5 to 45 kHz). Speed indicators: magnetic, hall effect, or optical speed sensors. Position indicators/transmitter: once/degree shaft encoder or once/turn magnetic speed sensors for timing information. BETA-LINK wireless angular position transmitter and receiver system. Marker Accessories: Once-per-degree shaft encoder kit, once-per-turn magnetic pickup, BETA-LINK transmitter, BETA-LINK charger, magnetic pickup cable, TM5D trigger module, timing light, 75-foot (23 m) marker cable. Pressure Accessories: 2 ea. DC AQUA-PROBE pressure transducers and cables. 5 and 12 foot (1.5 and 3.6 m) quick-connect Fisherв„ў connectors. (CR Model comes with only 1 ea. DC AQUA-PROBE). Vibration Accessories: standard accelerometer, 2 magnet mounts, probe tip, ChannellockВ® pliers. Variable gain ultrasonic microphone. 5 and 8 foot (1.5 and 2.4 m) quick-connect Fisherв„ў connectors. Optional triaxial accelerometer cable allows 3 simultaneous vibration readings from a single input. Ignition Accessories: Attenuator, ignition primary pickup cable, ignition secondary pickup cable. IR Temperature Wand: records skin temperature in the range -20В°F to +2400В°F (-29В°C to +1316В°C). Process and gauge readings: in any engineering units. Analysts notes: up to 200 notes for recording observations during data collection. Battery: Two Li-ion batteries and charging system. Also included: wrenches, carrying case, user manual. Single CPU RTwin software license. SPECIFICATIONS MODELS AVAILABLE Length: 10.5 in. (267 mm) 1-Year Warranty Width: 9.25 in. (235 mm) Height: 3.25 in. (83 mm) graphics display down; 9.5 in. (241 mm) graphics display up Weight: 7.3 lbs (3.2 kg) without accessories Operating temperature: 0В°F to +120В°F (вЂ“18В°C to +49В°C) Housing: shock-resistant, light-weight, EMI/RFI resistant Graphics screen: 256 color, high resolution, 800 x 600 VGA, sunlight viewable, EMI/RFI resistant RECIP-TRAP 9260/CR, RECIP-TRAP 9260/CR-CSA: for analysis of compressors and rotating machines. CSA model available for C1D2, Group A, B, C and D applications. RECIP-TRAP 9260/ECR, RECIP-TRAP 9260/ECR-CSA: for analysis of engines, compressors and rotating machines.CSA model available for C1D2, Group A, B, C and D applications. RECIP-TRAP 9260/DR: for analysis of diesel engines, and rotating machines. RECIP-TRAP 9260/CR does not come with Encoder Kit. May be purchased separately. Front panel display: 80-character, backlit, EMI/RFI resistant. RECIP-TRAP, AQUA-PROBE, BETA-LINK, AND RTwin ARE TRADEMARKS OF DYNALCO CONTROLS. DYNALCO CONTROLS RESERVES THE RIGHT TO CHANGE THESE SPECIFICATIONS WITHOUT NOTICE. FOR COMPLETE SPECIFICATION INFORMATION, CONTACT A DYNALCO REPRESENTATIVE. product_ngbrochure_rt9260 PH 832.251.8800 FAX 832.251.8801 Toll Free 800.950.2382 from U.S. and Canada 10528 Meadowglen Lane Houston TX 77042 U.S.A. www.dynalco.com