INNOVATION IN THE INDUSTRY

Appraisal No.808 [2013]
BRANZ Appraised
WWW.ARIDON.CO.NZ or 0800 ARIDON
ARIDON®: LOCKS HEAT IN - LOCKS WEATHER OUT
The New Zealand building industry is facing a rapidly changing landscape with
increased requirements for ‘quality building systems’ that speed up the build time,
provide superior end-user benefits and are a long-term sustainable alternative. The ARIDON® system ticks all these boxes, is fully BRANZ appraised and surpasses
standard building code requirements.
Continuous insulation is a traditional building system used throughout Germany,
Canada and the USA, as its energy efficiency and sustainability benefits are renowned
for surpassing all other insulation methods. ARIDON® has combined these best
practice systems with gold standard weatherproofing techniques to provide New
Zealanders a superior insulated weatherproofing system.
The ARIDON® continuous insulation system is suitable for new residential and low rise
commercial builds, as well as renovations. It provides significantly higher constructed
R values (typically 40% better) than traditional cavity insulation systems, regardless
of wall framing layout.
The ARIDON® system is a revolutionary, all-in-one, weatherproof insulation system
that interlocks together on the outside of the building frame, replacing building
wrap/rigid air barrier, insulation and cavity battens. ARIDON® continuous insulation
eliminates thermal bridging and provides superior weather protection to the building.
INNOVATION IN THE INDUSTRY
BUILDING WRAP/RIGID AIR BARRIER
+ INSULATION + CAVITY BATTENS
THE ALL-IN-ONE SOLUTION
WHY CHOOSE ARIDON®
OVER TRADITIONAL CAVITY INSULATION?
ARIDON® continuous insulation provides superior constructed R-Values versus any
traditional system on the New Zealand market and maintains its thermal performance
for the life of the building - regardless of climatic conditions and building movement.
EXAMPLE WALL (BEDROOM EXTERIOR WALL) COMPARING ARIDON® CONTINUOUS INSULATION VERSUS TRADITIONAL CAVITY INSULATION
NOTE: NZBC TIMBER FRAME REQUIREMENTS: ZONE 3 (SOUTH ISLAND & CENTRAL PLATEAU) HAVE A MINIMUM CONSTRUCTED R VALUE OF 2.0 FOR WALLS
TRADITIONAL INSULATION
R2.8 CAVITY INSULATION
ARIDON®
CONTINUOUS INSULATION
ARIDON® CONTINUOUS INSULATION +
WASTE PANEL OFF-CUTS IN CAVITY
CONSTRUCTED R-VALUE = 1.8
CONSTRUCTED R-VALUE = 2.6
CONSTRUCTED R-VALUE = 3.5
(40% better performance)
(90% better performance)
Note: R-Value calculations based on timber weatherboard exterior cladding & plasterboard linings.
Continuous insulation is a mainstream solution throughout Germany, Canada and the USA, as its energy efficiency and sustainability benefits
are renowned for surpassing all other insulation methods.
ARIDON® continuous insulation not only improves the energy performance of the building, but also moves the dew point from inside the
cavity to the exterior face of the wall - preventing mould, mildew and condensation accumulating inside the wall.
ARIDON® PREVENTING UNNECESSARY HEAT LOSS & SAVING ENERGY FOR THE LIFE OF THE BUILDING