Jersey Nj Environmental Driller

Jersey Nj Environmental Driller
Talon Drilling Company provides drilling services in New
Jersey, Pennsylvania, New York, Delaware and Maryland. Talon
installs monitoring wells, production wells, and piezometers
using Air and Mud Rotary, Air percussion rotary, Hollow Stem
Augers, ODEX and Rock coring techniques. Talon also provides
Geoprobe and Hydropunch Services for soil and ground water
monitoring, well repair, and well decommissioning services.
Talon Drilling Company was formed in January 1999 as an
Environmental and Geotechnical Drilling Service firm. The
Company was formed to provide quality drilling services to
engineering and environmental firms in Talon's service area.
Talon's environmental drilling experience includes monitoring
well installations, following the most stringent guidelines, as
specified by U.S. Environmental Protection Agency, New Jersey
Department of Environmental Protection, Pennsylvania
Department of Environmental Protection, Delaware DNREC,
NYSDEC and Maryland Department of Environmental Protection.
Talon's drillers are experienced in installation of monitoring
wells using the hollow stem auger, mud rotary (single-, double-,
and triple cased wells), and air percussion rotary drilling
methods. Their experience includes rock coring (NQ and HQ), use
of the ODEX casing underreaming in difficult drilling conditions. In addition, Talon crews are
experienced in installing, testing, and refurbishing monitoring and production water wells, well
decommissioning, and drilling test borings for sampling of soils and ground water. They are also
experienced in conducting geotechnical investigations for clients throughout Talon's service area.
Talon drillers and assistants have completed forty (40) hours OSHA CFR 1910.120 training
followed by eight (8) hour annual updates and maintain Commercial Driver License (CDL)
certification.
About
Statement of Qualifications
Talon Drilling Company was formed in January 1999 as an
Environmental and Geotechnical Drilling Company. The
Company was formed to provide quality drilling services to
engineering and environmental consulting firms. Talon drillers
have conducted subsurface investigations for environmental
engineering firms in New Jersey, Pennsylvania, Maryland,
Delaware, New York and Virginia.
Talon's environmental drilling experience includes monitoring
well installations, following the most stringent guidelines, as
specified by U.S. Environmental Protection Agency, New Jersey
Department of Environmental Protection, Pennsylvania
Department of Environmental Protection, Delaware DNREC, and Maryland Department of
Environmental Protection.
Talon drillers and assistants have completed forty (40) hour
OSHA CFR 1910.120 training followed by eight (8) hour
annual updates and maintain Commercial Driver License
(CDL) certification.
Talon's President holds M.S. and Ph.D. Degrees in Geology and
has 25 years of varied experience in environmental consulting.
Services
We specialize in the following services:
Hollow Stem Auger Drilling 3 1/4 to 12 1/4-inch ID
Mud Rotary Drilling 6 to 14-inch ID
Air Rotary Drilling 6 to 14-inch ID
Air Percussion Rotary Drilling (Down-The-Hole
Hammer) 6 to 14-inch ID
Geoprobe Direct Push Sampling
– Truck-mounted Geoprobe 5400
– Geoprobe 4220 mounted on a 4-wheel drive
Bobcat ATV
– Geoprobe
– Hollow Stem Auger and Rotary
– Rock Coring
Odex – 4,6-8, and 12-inch ID
Hydropunch Sampling
Rock coring (NQ and HQ)
Soil Sampling
Equipment
1995 Geoprobe System Model 5400
This geoprobe is mounted on a 2004 Ford 4×4. This unit is
capable of advancing probe holes, taking soil, ground water
and vapor samples. This unit’s capabilities include:
Standard Geoprobe sampling
Large bore sample-1.0625-inch x 22-inch
Macro core sample-1.5-inch x 48-inch
Macro core closed piston samples
3/4 inch temporary piezometer installation via
power punch
Groundwater sampling via peristaltic pump
2-inch diameter split spoon sampling
2003 Bobcat ATV with 4220 Geoprobe
Mounted on a 4-wheel drive Bobcat fitted with metal tracks, this
unit is capable of drilling probe holes, taking soil/water samples
in a variety of rough terrain enviroments.
Large bore sample-1.0625-inch x 22-inch
Macro core sample-1.5-inch x 48-inch
Macro core closed piston samples
3/4-inch temporary piezometer installation via power
punch
Groundwater sampling via peristaltic pump
2-inch diameter split spoon sampling
Acker Soil XLS ATV Drill Rig
Rubber track-mounted all-terrain drill rig. This rig is capable
of drilling; hollow stem auger, mud rotary, air rotary, and air
hammer techniques. The rig has full function radio remote
control. The structural steel mast is just 10 feet tall to allow
access to low-overhead areas. The mast mounting allows for
angle drilling as well as vertical drilling. The rig is also
equipped with a cathead for hoisting and performing
standard penetration tests. The rig carries a 160-gallon
onboard welded steel water tank.
Failing F-10
This Multi-purpose rig has 15,000/30,000 foot pounds of
torque utilizing a 10-foot stroke. This makes the drill easy to
convert from hollow stem augering to mud rotary drilling;
Utilizing an auxiliary air supply and is capable of 6, 8, and 10inch air hammer drilling to a depth of approxiamately 300
feet.
For more information please visit
http://www.talon-drilling.com

Talon is a full service drilling company with extensive capabilities. Our base of operations is centrally located to New Jersey, Pennsylvania, New York, Maryland, and Delaware.