Standard: EN 1706 ALUMINUM AND ALUMINUM ALLOYS CASTINGS EN 1676 ALUMINUM ALLOYED INGOTS FOR REMELTING Alloy group: Al Si 9 Cu Alloy designation: EN AB and AC 46400 - Al Si 9 Cu 1 Mg Replaces: R l UNI 7396/3 - SG AI Si 9 Cu 1 CHEMICAL COMPOSITION % ELEMENTS ALLOY EN AB 46400 UNI 7369/3 Si min Fe 83 8,3 max 9,7 min 8,3 max 9,7 0,7 0,7 Cu Mn Mg Cr 08 0,8 0 15 0,15 0 30 0,30 1,3 0,55 0,65 0,80 0,20 0,30 1,30 0,5 0,60 Ni Zn Pb Sn Ti Individual impurities Global impurities 0,05 0,25 0 10 0,10 - 0,20 0,8 0,10 0,10 0,18 0,10 - 0,20 0,70 0,10 0,10 0,20 0,8* MECHANICAL FEATURES DETECTED FROM SEPARATE CASTING TEST SPECIMENS Rm Sp 0,2 A HB Elongation Brinell hardness Temper designat des g at ions EN 1706 UNI 7369/3 EN 1706 UNI 7369/3 Mpa N/mm2 Mpa N/mm2 % SAND (as cast) F 135 145-165 90 90-110 CHILL (as cast) F 170 215-235 100 T6 275 295-315 235 Castingg pprocess Cast ocess Tensile strenght Proof Stress EN 1706 UNI 7369/3 % HBW HB 1 1-1,5 60 60-80 135-155 1 3-4 75 70-80 245-255 1,5 2-3 105 105-130 EN 1706 UNI 7369/3 PRESSURE DIE (as cast) Tel/Phone : +90 212 875 22 22 : +90 212 875 99 83 E-posta/E-mail : [email protected] Merkez Ofis/Head Office : Baksav San.Sit Mustafa Kurdoğlu Cad. no:22/2 Beylikdüzü/ISTANBUL/TURKEY Faks/Fax Fabrika/Factory : Mimarsinan Mah. Eski Bağlar Cad. No:23 Kapaklı - Çerkezköy / Tekirdağ/TURKEY
© Copyright 2024 Paperzz