DEKORATÝF CEPHE SÜSLEMELERÝ CMC SÖVE HARCI HeeD CMC ÝZOLASYON (SÖVE HARCI) ÜRÜN BÝLGÝLERÝ HeeD CMC HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà ÜRÜN TANITIMI: HeeD CMC Ýzolasyon söve harcý dýþ hava koþullarýna son derece dayanýklý bir sývadýr. Kullanýma hazýr olan HeeD CMC Ýzolasyon söve harcý, kompresör (hava tabancasý ile püskürtme olarak) ya da söve kaplama makinesi ile sývama olarak söve ürünlerinin ve cephe kaplamalarýn üzerine uygulanabilir. Yeni nesil mantolama sistemlerini ve söveyi mükemmel yapan üstündeki söve harcýnýn olduðu unutulmamalýdýr. Isý yalýtým levhalarýnda mükemmel aderans saðlar. Mükemmel yapýþma ve esneme kabiliyetine sahiptir. EPS, XPS, ahþap, beton, alçý gibi birçok yüzeye çok iyi yapýþýr. Çatlama yapmaz. Darbelere karþý dayanýklýdýr. Su buharýný geçirir. Yapý fiziði açýsýndan nefes alýyor olmasý insan saðlýðý acýsýndan önemlidir. Nefes aldýðý için kabarma, bombe, dökülme yapmaz. Kolay karýþtýrýlýr, kullanýma hazýrdýr. ÖZELLÝKLERÝ: . Suya dayanýklýdýr. . Kolay karýþýr. . Ýnce tane yapýsýndan dolayý dökümde pürüzsüz bir yüzey oluþur. . Dýþ cephe montajý kolaydýr. . Binalarda estetik bir görüntü oluþturur. . Yüksek aderans özelliðine sahip olduðu için kayma yapmaz. . Emülsiyon karýþýmda kurumayý hýzlandýran kurutucularýn bulunmasýndan dolayý hýzlý bir kuruma süreci oluþturur. . Ýster hava tabancasý ister söve kaplama makinesi ile yüzeye uygulanabilir. . Yüksek su buhar geçirgenliði ile su buharýnýn engellenmeden dýþarýya atýlýp binalarýn nefes almalarýný saðlar. . Alkaliye dayanýklýdýr. . UV, aþýrý soðuk veya sýcak, yaðmur, kar, nem gibi aðýr hava þartlarýndan etkilenmez. Kabarmaz, çatlamaz, renkleri solmaz. . Standart beyaz renk veya renkli harç yapýlabilir. . Solvent içermediði için kokmaz, insan ve çevre saðlýðýna zarar vermez. GENEL BÝLGÝLER: . Renkleri: 200 özgün renkte üretilmektedir. . Dokusu: Doðal renkli mineral granüllerinin dokusunu yansýtmaktadýr. . Yapýsý: Emülsiyon esaslý 03 UYGULAMA BÝLGÝLERÝ: . Uygulama Sýcaklýðý: 0 °C / +40 °C . HeeD CMC Ýzolasyon Söve harcýnda gerekli tüm kimyasal ve mineraller yüksek oranda ihtiva ettiðinden dolayý ekstradan HeeD CMC Ýzolasyon Söve harcýnýn içerisine her hangi bir kimyasal katmaya gerek yoktur. HeeD CMC Ýzolasyon Söve harcý uygulama öncesi iyice karýþtýrýlarak uygulanacak yüzeye çelik mala veya çekme sýva makinesi ile tatbik edilir. . Kuruma süresi: Yüzey kurumasý yaklaþýk 24 saat, (23 °C ve % 50Baðýl Nem’de) . Tam kurumasý 48 saat (23 °C ve % 50 Baðýl Nem’de) . Daha düþük sýcaklýk ve daha yüksek baðýl nem, kuruma süresini uzatýr. . Tüketimi: Yüzeyin pürüzlülüðüne baðlý olarak ortalama 4-5kg/m² . Kaplama Plaklarý ve Söve Profillerinde uygulama kalýnlýðý: 2,5-3 mm . Uygulama Aletleri: Söve kaplama makinasý yada Çelik mala . Erimiþ, donmuþ veya sýcak yüzeylerde uygulanmaz. . Güneþ altýnda uygulanmamalýdýr. PERFORMANS BÝLGÝLERÝ: . Su Buhar Geçirgenliði- SD (m) (DIN 52615): 0,150 . Su Emme (kg/m² h0,5) (Dýn 52617): 0,100-0,500 . Soyulma Mukavemeti (KgF) (ANFOR T 30706): >2,5 . Elastikli Özelliði : %80 ( 0 °C üzerinde ) . Yapýþma Gücü: 313,15 PPA . Yaþlanma testi: En az 100 devir. . Servis Sýcaklýðý: 0 °C / +40 °C UYARILAR: . Çocuklarýn ulaþabileceði yerlerden uzak tutunuz. . Göz ve Cilt temasýndan sakýnýnýz. . Yutulmasý halinde hemen doktora baþvurununuz. DEPOLAMA: . Kuru ve serin ortamda ambalajlarýn aðzýnýn açýlmamasý koþuluyla üretim tarihinden itibaren 1 yýldýr. . Aðzý açýlmamýþ ambalajýnda 0 – 40 °C arasýnda depolanmalýdýr. AMBALAJ: . 90 kg bidonlarda. HeeD CMC Elastic reinforcing filler HeeD CMC IZOLASYON production company HeeDGROUP (Turkey - Istanbul). HeeD CMC IZOLASYON is a homogeneous, dense mineral content with flexible acrylic polymer. Safe and non-toxic. PURPOSE: Elastic reinforcing filler HeeD CMC IZOLASYON completely ready. It is used for application to the surface of polystyrene products in order to protect from environmental and mechanical damage, giving them flexibility. Very good adhesion to most surfaces: wood, concrete, plaster. High elasticity HeeD CMC IZOLASYON prevents cracks on the surface profiles in strain during transport and installation. Strength of the coating significantly improves stability of products to mechanical stress, including increasing vandal product characteristics. After drying HeeD CMC IZOLASYON and installation profiles can be carried out color. HeeD CMC IZOLASYON has high performance and adhesion to different surfaces. REQUIRED ADDITIONAL USE reinforcing mesh. After applying the HeeD CMC IZOLASYON Styrofoam elements acquire the following qualities: - Protection from external factors (water, moisture, cold and UV-rays); - Elasticity (details can be bent without further strain) is also in the process of settling the basement (where the building is new) Styrofoam plates with rubber coating are deformed and do not appear on the surface of the crack; - In this cover no cracks, and they do not form over time; - High thermal insulation; - Water resistance; - HeeD CMC IZOLASYON Reinforcing filler is available in white (dense, homogeneous mass.) The color can vary from white to ecru. After application and drying has a rough surface. Operating temperature (when applied HeeD CMC IZOLASYON on profiles): from +5° C to +40° C Storage temperature: +4? C + 45 º C Adhesion to foam polystyrene: 313.15 kPa Test for aging - at least 100 cycles Elasticity: +0° With 80% Resistance to cycles of "freezing - thawing" - at least 100 cycles PACKAGING: 90-140 kg drums. STORAGE: Barrels with the mixture should be stored at +4 °C to +45 °C, in a place protected from direct sunlight, for a period of 12 months. Safety: to work with HeeD CMC IZOLASYON recommend wearing protective gloves, respirator is not required. Avoid contact with exposed skin, by ingestion rinse. Note: If a reinforcing filler for polystyrene elements applied correctly, profiles are assembled according to the rules, the life of the insulation and decoration, equivalent lifetime of the building. Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà HeeD CMC IZOLASYON ïðîèçâîäñòâà Êîìïàíèè HeeDGROUP (Òóðöèÿ - ÑÒÀÌÁÓË). HeeD CMC IZOLASYON ïðåäñòàâëÿåò ñîáîé îäíîðîäíûé , ãóñòîé ìèíåðàëüíûé ñîñòàâ ñ ýëàñòè÷íûì àêðèëîâûì ïîëèìåðîì. Áåçîïàñíà è ÍÅ òîêñè÷íà. ÍÀÇÍÀ×ÅÍÈÅ: Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà HeeD CMC IZOLASYON ïîëíîñòüþ ãîòîâà ê èñïîëüçîâàíèþ. Ïðèìåíÿåòñÿ äëÿ íàíåñåíèÿ íà ïîâåðõíîñòü èçäåëèé èç ïåíîïîëèñòèðîëà ñ öåëüþ çàùèòû îò âîçäåéñòâèÿ îêðóæàþùåé ñðåäû è ìåõàíè÷åñêèõ ïîâðåæäåíèé , ïðèäàíèÿ èì ãèáêîñòè. Îáëàäàåò î÷åíü õîðîøåé àäãåçèåé ê áîëüøèíñòâó ïîâåðõíîñòåé: äåðåâî, áåòîí, øòóêàòóðêà. Âûñîêàÿ ýëàñòè÷íîñòü HeeD CMC IZOLASYON ïðåäîòâðàùàåò ïîÿâëåíèå òðåùèí íà ïîâåðõíîñòè ïðîôèëåé ïðè äåôîðìàöèè â ïðîöåññå òðàíñïîðòèðîâêè è ìîíòàæà. Ïðî÷íîñòü ïîëó÷àåìîãî ïîêðûòèÿ çíà÷èòåëüíî ïîâûøàåò ñòîéêîñòü èçäåëèé ê ìåõàíè÷åñêèì âîçäåéñòâèÿì, â òîì ÷èñëå, ïîâûøàÿ àíòèâàíäàëüíûå õàðàêòåðèñòèêè èçäåëèÿ. Ïîñëå âûñûõàíèÿ HeeD CMC IZOLASYON è ìîíòàæà ïðîôèëåé ìîæíî ïðîâîäèòü îêðàøèâàíèå. HeeD CMC IZOLASYON îáëàäàåò âûñîêèìè ýêñïëóàòàöèîííûìè õàðàêòåðèñòèêàìè è àäãåçèåé ê ðàçëè÷íûì ïîâåðõíîñòÿì. ÍÅ ÒÐÅÁÓÅÒÑß ÄÎÏÎËÍÈÒÅËÜÍÎÅ ÈÑÏÎËÜÇÎÂÀÍÈÅ ÀÐÌÈÐÓÞÙÅÉ ÑÅÒÊÈ. Ïîñëå íàíåñåíèÿ HeeD CMC IZOLASYON ïåíîïîëèñòèðîëîâûå ýëåìåíòû ïðèîáðåòàþò ñëåäóþùèå êà÷åñòâà: - çàùèòà îò âíåøíèõ ôàêòîðîâ (âîäà, âëàãà, õîëîä è UV-ëó÷è); - ýëàñòè÷íîñòü (äåòàëè ìîæíî ñãèáàòü áåç ïîñëåäóþùåé äåôîðìàöèè); òàêæå â ïðîöåññå îñåäàíèÿ ôóíäàìåíòà (êîãäà çäàíèå íîâîå) ïåíîïîëèñòèðîëîâûå ïëèòû ñ ýëàñòè÷íûì ïîêðûòèåì íå äåôîðìèðóþòñÿ è íà ïîâåðõíîñòè íå ïîÿâëÿþòñÿ òðåùèíû; - â äàííîì ïîêðûòèè íåò òðåùèí: è îíè íå îáðàçóþòñÿ ñî âðåìåíåì; - âûñîêèé êîýôôèöèåíò òåïëîèçîëÿöèè; - âîäîíåïðîíèöàåìîñòü; - HeeD CMC IZOLASYON íå ãîðèò. Àðìèðóþùàÿ øïàòëåâêà âûïóñêàåòñÿ áåëîãî öâåòà (ãóñòàÿ, îäíîðîäíàÿ ìàññà). Öâåò ìîæåò ìåíÿòüñÿ îò áåëîãî ê ýêðþ. Ïîñëå íàíåñåíèÿ è âûñûõàíèÿ èìååò øåðîõîâàòóþ ïîâåðõíîñòü. Òåìïåðàòóðà ýêñïëóàòàöèè (ïðè íàíåñåíèè HeeD CMC IZOLASYON íà ïðîôèëè): îò +5°Ñ äî +40°Ñ. Òåìïåðàòóðà õðàíåíèÿ: +4 °Ñ + 45 °Ñ Àäãåçèÿ ê ïåíîïîëèñòèðîëó: 313,15 êÏà Òåñò íà ñòàðåíèå – íå ìåíåå 100 öèêëîâ Óïðóãîñòè: +0 °Ñ 80% Ñòîéêîñòü ê öèêëàì "çàìîðàæèâàíèå - ðàçìîðàæèâàíèå" - íå ìåíåå 100 öèêëîâ ÓÏÀÊÎÂÊÀ: áî÷êè 90-140 êã. ÕÐÀÍÅÍÈÅ: Áî÷êè ñî ñìåñüþ äîëæíû õðàíèòüñÿ ïðè òåìïåðàòóðå îò +4°Ñ äî +45 °Ñ, â ìåñòå, çàùèùåííîì îò ïðÿìûõ ñîëíå÷íûõ ëó÷åé, ñðîêîì 12 ìåñÿöåâ. Òåõíèêà áåçîïàñíîñòè: ðàáîòàòü ñ HeeD CMC IZOLASYON ðåêîìåíäóåòñÿ â çàùèòíûõ ïåð÷àòêàõ, ðåñïèðàòîð íå òðåáóåòñÿ. Èçáåãàòü êîíòàêòà ñ íåçàùèùåííûìè ó÷àñòêàìè êîæè, ïðè ïîïàäàíèè ñìûòü âîäîé.Ïðèìå÷àíèå: Åñëè àðìèðóþùàÿ øïàòëåâêà íà ïåíîïîëèñòèðîëüíûå ýëåìåíòû íàíåñåíà ïðàâèëüíî, ïðîôèëè ìîíòèðîâàíû ïî âñåì ïðàâèëàì, òî ñðîê ñëóæáû äàííîé èçîëÿöèè è äåêîðà, ýêâèâàëåíòåí ñðîêó ñëóæáû çäàíèÿ. HeeD CMC IZOLASYON - dense, homogeneous, medium-grained, quartz sand, interspersed with the mineral composition of a white acrylic based. HeeD CMC IZOLASYON elastic reinforcing filler is designed for application to the surface of polystyrene products without reinforcing mesh. Characteristics of such that do not preclude the application and to other materials. SMS elastic putty has good adhesion to polystyrene foam, low coating weight in the product, and excellent dimensional stability. Finished products coated HeeD CMC IZOLASYON elastic reinforcing filler, well painted with acrylic exterior paint, which allows us to give the front of any color scheme. Texture coating that imitates the stone surface, gives the finished facade additional refinement. Lightweight, flexible, but strong parts allows designers to implement any architectural decisions. Coated products HeeD CMC IZOLASYON elastic reinforcing filler has excellent resistance to physical and thermal deformation. Finished products allows mounting on curved surfaces. In this case, the formation of cracks on the surface, does not occur. Due to its high flexibility, the product coated HeeD CMC IZOLASYON elastic reinforcing filler tolerate shrinkage in the building. Coated products HeeD CMC IZOLASYON elastic reinforcing filler has the following properties: • Flexibility; • High insulation; • High thermal insulation; • Water-resistant; • The coating does not burn; • Frost; • Coverage of the operation will not crack; • High strength and durability; • If necessary, it is very simple, cheap and technological renovation. OPERATÝON: HeeD CMC IZOLASYON elastic reinforcing filler is applied to the mechanized method (long press). Recommended thickness of 3 mm. Time "setting" of the coating is from 2.5 hours (at +20 °C). Hard dry - 2-3 days (at or above + 10 °C). Do not leave an open container in the sun. STORAGE: Store in tightly closed containers at a temperature not below 4 °C and above 40 °C (optimum storage temperature of +10 to +30 °C). After use, tightly close the lid. PACKÝNG: HeeD CMC IZOLASYON elastic reinforcing filler packed in plastic evrobochki weighing 90 kg. CONSUMPTÝON: To cover 1 square meter to 3.6 - 4.6 kg of putty. In the manufacture and assembly of products in accordance with the requirements of the technology, the service life of the facade of the building is the same! HeeD CMC IZOLASYON – ãóñòîé, îäíîðîäíûé, ñðåäíåçåðíèñòûé, ñ âêðàïëåíèÿìè êâàðöåâîãî ïåñêà ìèíåðàëüíûé ñîñòàâ áåëîãî öâåòà íà àêðèëîâîé îñíîâå. HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà ïðåäíàçíà÷åíà äëÿ íàíåñåíèÿ íà ïîâåðõíîñòè ïåíîïîëèñòèðîëüíûõ èçäåëèé áåç àðìèðóþùåé ñåòêè. Õàðàêòåðèñòèêè ñîñòàâà òàêîâû, ÷òî íå èñêëþ÷àþò âîçìîæíîñòè íàíåñåíèÿ è íà äðóãèå ìàòåðèàëû. Ýëàñòè÷íàÿ øïàòë¸âêà ÑÌÑ îáëàäàåò õîðîøåé àäãåçèåé ê ïåíîïîëèñòèðîëó, íèçêèì âåñîì ïîêðûòèÿ â èçäåëèè, è îòëè÷íîé óñòîé÷èâîñòüþ ê äåôîðìàöèè. Ãîòîâûå èçäåëèÿ ñ ïîêðûòèåì HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà, õîðîøî îêðàøèâàþòñÿ àêðèëîâûìè ôàñàäíûìè êðàñêàìè, ÷òî ïîçâîëÿåò ïðèäàòü ôàñàäó ëþáîå öâåòîâîå ðåøåíèå. Ôàêòóðà ïîêðûòèÿ, èìèòèðóþùàÿ êàìåííóþ ïîâåðõíîñòü, ïðèäà¸ò ãîòîâîìó ôàñàäó äîïîëíèòåëüíûé èçûñê. ˸ãêèå, ýëàñòè÷íûå, íî ïðî÷íûå äåòàëè ïîçâîëÿþò äèçàéíåðó ðåàëèçîâàòü ëþáûå àðõèòåêòóðíûå ðåøåíèÿ. Èçäåëèÿ ñ ïîêðûòèåì HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà èìåþò îòëè÷íóþ óñòîé÷èâîñòü ê ôèçè÷åñêîé è òåìïåðàòóðíîé äåôîðìàöèè. Ãîòîâûå èçäåëèÿ ïîçâîëÿåòñÿ êðåïèòü íà èçîãíóòûå ïîâåðõíîñòè. Ïðè ýòîì, îáðàçîâàíèÿ òðåùèí íà ïîâåðõíîñòè, íå ïðîèñõîäèò. Áëàãîäàðÿ âûñîêîé ýëàñòè÷íîñòè, èçäåëèÿ ñ ïîêðûòèåì HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà õîðîøî ïåðåíîñÿò óñàäêó â ïðîöåññå ýêñïëóàòàöèè çäàíèÿ. Èçäåëèÿ ñ ïîêðûòèåì HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà îáëàäàþò ñëåäóþùèìè ñâîéñòâàìè: • Ýëàñòè÷íîñòü; • Âûñîêèé êîýôôèöèåíò çâóêîèçîëÿöèè; • Âûñîêàÿ òåïëîèçîëÿöèÿ; • Âîäîíåïðîíèöàåìîñòü; • Ïîêðûòèå íå ãîðèò; • Ìîðîçîóñòîé÷èâîñòü; • Ïîêðûòèå ïðè ýêñïëóàòàöèè íå ðàñòðåñêèâàåòñÿ; • Âûñîêàÿ ïðî÷íîñòü è äîëãîâå÷íîñòü; • Ïðè íåîáõîäèìîñòè, î÷åíü ïðîñòîé, äåø¸âûé è òåõíîëîãè÷íûé ðåìîíò. Ýêñïëóàòàöèÿ: HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà íàíîñèòñÿ ìåõàíèçèðîâàííûì ñïîñîáîì (ïðîòÿæíûì ñòàíêîì). Ðåêîìåíäóåìàÿ òîëùèíà ñëîÿ 3 ìì. Âðåìÿ «ñõâàòûâàíèÿ» ïîêðûòèÿ ñîñòàâëÿåò îò 2.5 ÷àñîâ (ïðè òåìïåðàòóðå + 20 °Ñ). Ïîëíîå âûñûõàíèå - 2-3 ñóòîê (ïðè òåìïåðàòóðå íå íèæå + 10 °Ñ). Íå ðåêîìåíäóåòñÿ îñòàâëÿòü îòêðûòóþ åìêîñòü íà ñîëíöå. Óñëîâèÿ õðàíåíèÿ: Õðàíèòñÿ â ïëîòíî çàêðûòûõ åìêîñòÿõ ïðè òåìïåðàòóðå íå íèæå +4 °Ñ è íå âûøå +40 °Ñ (îïòèìàëüíàÿ òåìïåðàòóðà õðàíåíèÿ îò +10 äî +30 °Ñ). Ïîñëå èñïîëüçîâàíèÿ ïëîòíî çàêðûòü êðûøêîé. Ôàñîâêà: HeeD CMC IZOLASYON Ýëàñòè÷íàÿ àðìèðóþùàÿ øïàòëåâêà ðàñôàñîâàíà â ïëàñòèêîâûå åâðîáî÷êè âåñîì 90 êã. Ðàñõîä: Äëÿ ïîêðûòèÿ 1 êâ.ì. íåîáõîäèìî 3,6 – 4,6 êã øïàòëåâêè. Ïðè èçãîòîâëåíèè è ìîíòàæå èçäåëèé â ñîîòâåòñòâèè ñ òðåáîâàíèÿìè òåõíîëîãèè, ñðîê ñëóæáû ôàñàäà ðàâåí ñðîêó ñëóæáû çäàíèÿ! 04 DEKORATÝF RENKLÝ PANELLER COLORFUL DECORATIVE PANELS ÖÂÅÒÍÛÅ ÄÅÊÎÐÀÒÈÂÍÛÈÅ ÏÀÍÅËÈ (Derinlik/Depth/ãëóáèíà ) : 30-40-50-60 mm 05 500 - 600 mm x 2000 mm HDP - 01 500 - 600 mm x 2000 mm HDP - 02 500 - 600 mm x 2000 mm HDP - 03 500 - 600 mm x 2000 mm HDP - 04 06 500 - 600 mm x 2000 mm HDP - 05 500 - 600 mm x 2000 mm HDP - 06 500 - 600 mm x 2000 mm HDP - 07 500 - 600 mm x 2000 mm HDP - 08 07 500 - 600 mm x 2000 mm HDP - 09 500 - 600 mm x 2000 mm HDP - 10 500 - 600 mm x 2000 mm HDP - 11 500 - 600 mm x 2000 mm HDP - 12 08 500 - 600 mm x 2000 mm HDP - 13 500 - 600 mm x 2000 mm HDP - 14 500 - 600 mm x 2000 mm HDP - 15 500 - 600 mm x 2000 mm HDP - 16 09 500 - 600 mm x 2000 mm HDP - 17 500 - 600 mm x 2000 mm HDP - 18 500 - 600 mm x 2000 mm HDP - 19 600 mm x 1200 mm HDP - 20 10 600 mm x 1200 mm HDP - 21 600 mm x 1200 mm HDP - 21-01 1300 600 mm x 13 1 00 mm MP - 16 M 500 mm x 1200 mm MP - 18 11 500 mm X 1200 mm MP - 19 500 mm X 1200 mm MP - 20 500 mm X 1200 mm MP - 21 500 mm X 1200 mm MP - 22 500 mm X 1200 mm MP - 23 12 PENCERE SÖVELERÝ decoratif frames (jambs) ÎÊÎÍÍÛÅ ÐÀÌÛ 13 PS-02 PS-03 30 mm 45 mm PS-04 PS-05 PS-07 30 mm 30 mm 125 mm 120 mm 60 mm PS-06 130 mm 100 mm 120 mm 60 mm 120 mm PS-01 40 mm 100 mm 40 mm 100 mm 100 mm 40 mm PS-08 14 PS-09 130 mm 130 mm PS-11 50 mm 135 mm 135 mm PS-15 30 mm 140 mm 130 mm 130 mm PS-14 45 mm PS-16 60 mm 40 mm 40 mm PS-13 PS-12 130 mm 130 mm PS-10 35 mm 35 mm 30 mm PS-17 15 PS-18 30 mm PS-20 PS-23 PS-25 40 mm 40 mm 140 mm 140 mm 35 mm PS-24 140 mm PS-22 35 mm 35 mm 140 mm 140 mm 35 mm PS-21 140 mm PS-19 30 mm 140 mm 140 mm 140 mm 30 mm PS-26 16 PS-27 40 mm PS-28 140 mm PS-29 PS-33 50 mm 45 mm 150 mm 150 mm 50 mm 150 mm 140 mm 140 mm PS-32 45 mm PS-34 PS-30 50 mm 45 mm PS-31 40 mm 140 mm 140 mm 140 mm 40 mm PS-35 17 PS-36 18 DENÝZLÝKLER windowsills ÏÎÄÎÊÎÍÍÈÊÈ 19 DS-01 DS-02 DS-03 120 mm 45 mm 120 mm 40 mm DS-04 80 mm 120 mm 120 mm 70 mm DS-05 DS-06 DS-07 40 mm 140 mm 140 mm 40 mm DS-08 DS-09 80 mm 140 mm 140 mm 55 mm DS-10 95 mm 150 mm 150 mm 90 mm 20 KÝLÝT TAÞLARI key stones ÇÀÌÊÈ (Derinlik/Depth) : Uyarlanabilir/Adaptable ãëóáèíà: ìîæíî àäàïòèðîâàòü 21 200 mm 200 mm KT-01 200 mm 200 mm KT-02 200 mm 200 mm KT-03 200 mm 200 mm KT-04 200 mm 200 mm KT-05 22 TAÇLAR crowns ÀÐÊÈ 23 TAÇ/ÀÐÊÀ -01 Uygulama alanýna göre deðiþik ölçülerde uyarlanabilir. Depending on application surface can be produced in differend sizes  çàâèñèìîñòè îò ïîâåðõíîñòè íàíåñåíèÿ ìîãóò áûòü èçãîòîâëåíû â ðàçëè÷íûõ ðàçìåðàõ TAÇ/ÀÐÊÀ -02 Uygulama alanýna göre deðiþik ölçülerde uyarlanabilir. Depending on application surface can be produced in differend sizes  çàâèñèìîñòè îò ïîâåðõíîñòè íàíåñåíèÿ ìîãóò áûòü èçãîòîâëåíû â ðàçëè÷íûõ ðàçìåðàõ TAÇ/ÀÐÊÀ -03 Uygulama alanýna göre deðiþik ölçülerde uyarlanabilir. Depending on application surface can be produced in differend sizes  çàâèñèìîñòè îò ïîâåðõíîñòè íàíåñåíèÿ ìîãóò áûòü èçãîòîâëåíû â ðàçëè÷íûõ ðàçìåðàõ 24 APLÝKLER jamb bottoms ÍÈÆÍÈÉ ÎÒÊÎÑ 150 mm 180 mm AP-01 180 mm 150 mm 150 mm 180 mm AP-02 AP-03 25 180 mm 160 mm 175 17 75 mm 200 mm AP-04 AP-05 180 mm 185 mm 180 mm 180 mm AP-06 AP-07 180 mm 185 mm 185 mm 180 mm AP-08 AP-09 200 mm 200 mm 200 mm 200 mm AP-10 AP-11 300 mm 200 mm 200 mm 300 mm AP-12 AP 12 AP--13 AP 26 KAT SÝLMELERÝ cornice ÊÀÐÍÈÇÛ 27 65 mm KS-02 1 mm 185 KS-01 140 mm 120 mm 45 mm KS-04 190 mm 190 mm KS-03 50 mm 50 mm KS-06 190 mm 190 mm KS-05 70 mm 100 mm KS-08 28 190 mm 190 mm KS-07 100 mm 115 mm KS-10 190 mm KS-09 190 mm 100 mm 115 mm KS-11 KS-12 190 mm 190 mm 115 mm KS-14 190 mm KS-13 75 mm 195 mm 115 mm 90 mm KS-16 29 230 mm 200 mm KS-15 55 mm 60 mm KS-18 230 mm 230 mm KS-17 70 mm 80 mm KS-20 230 mm KS-19 230 mm 80 mm 100 mm KS-22 230 mm KS-21 230 mm 90 mm 115 mm KS-24 230 mm KS-23 30 230 mm 110 mm 65 mm KS-26 290 mm KS-25 230 mm 115 mm 70 mm KS-28 290 mm KS-27 290 mm 65 mm 95 mm KS-30 290 mm 290 mm KS-29 95 mm 170 mm KS-32 31 325 mm KS-31 320 mm 60 mm 32 DESENLÝ KAT SÝLMELERÝ embossed cornices ÐÅËÜÅÔÍÛÅ ÊÀÐÍÈÇÛ 33 70 mm DKS-02 190 mm DKS-01 190 mm 70 mm 80 mm DKS-04 190 mm 190 mm DKS-03 115 mm DKS-06 34 190 mm DKS-05 115 mm 190 mm 115 mm DKS-08 230 mm DKS-07 80 mm 230 mm 70 mm DKS-10 290 mm DKS-09 65 mm 290 mm 65 mm DKS-12 35 325 mm DKS-11 170 mm 290 mm 120 mm 36 PAYANDALAR buttress ÊÎÍÑÎËÈ 37 485 mm 322 mm 330 mm 825 mm PY-01 PYY 01 PY-02 PYY 02 315 mm 360 mm 360 mm 315 mm PY-03 PYY 03 PY-04 PYY 04 230 mm 375 mm 385 mm 200 mm PY-05 PYY 05 PY-06 PYY 06 275 mm 390 mm 390 mm 230 mm PY-07 PY-08 38 325 mm 415 mm 415 mm 245 mm PY-10 PYY 10 195 mm 450 mm 425 mm 450 mm PY-09 PY-12 PYY 12 450 mm 450 mm 450 mm 450 mm PY-11 PYY 11 PY-13 PYY 13 PY-14 PYY 14 490 mm 540 mm 490 tmm 365 mm PY-15 PY-16 39 330 mm 555 mm 555 mm 360 mm PY-17 PYY 17 PY-18 PYY 18 300 mm 590 mm 590 mm 190 mm PY-19 PYY 19 PY-20 PYY 20 400 mm 600 mm 590 mm 465 mm PY-21 PYY 21 PY-22 PYY 22 300 mm 645 mm 700 tmm 600 mm PY-23 PY-24 40 MANTOLAMA PLAKALARI sheating plates ÏÎÊÐÛÒÈÅ ÏËÀÑÒÈÍ 41 500-600 mm MP-01 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 30 30-40-50-60 mm 500-600 mm MP-02 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 30-40-50-60 mm 500-600 mm MP-03 MP-0 3 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 30-40-50-60 mm 42 500-600 500 600 mm mm MP-04 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 35-45-55 mm 500-600 mm MP-05 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 30-40-50 mm 500-600 mm MP-06 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 30-40-50 mm 43 500-600 mm MP-07 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 40-50 mm 500-600 mm MP-08 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 40-50 mm 500-600 mm MP-09 m 0m 200 (Derinlik/Depth/ãëóáèíà) : 40-50 mm 44 500-600 mm MP-10 2000 mm (Derinlik/Depth/ãëóáèíà) : 30- 40-50-60 mm 500-600 mm MP-11 m 2000 m (Derinlik/Depth/ãëóáèíà) : 30- 40-50-60 mm 500-600 mm MP-12 2000 mm (Derinlik/Depth/ãëóáèíà) : 40-50 mm 45 500-600 mm MP-13 m 2000 m (Derinlik/Depth/ãëóáèíà) : 30- 40-50 mm 500-600 mm MP-14 mm 2000 (Derinlik/Depth/ãëóáèíà) : 30- 40-50 mm 500-600 mm MP-15 P-15 2000 mm (Derinlik/Depth/ãëóáèíà) : 30- 40-50 mm 46 600 mm MP-16 m 0m 130 500 mm MP-17 1200 mm 500 mm MP-18 1200 mm 47 500 mm MP-19 P-19 1200 mm 500 mm MP-20 P-20 mm 1200 500 mm MP-21 1200 mm 48 500 mm MP-22 1200 mm 1200 mm 500 mm MP-23 P-23 49 50 FUGA ÇITALARI joint profiles ÑÎÂÌÅÙÅÍÍÛÅ ÏÐÎÔÈËÈ FC-01 100 mm 30 mm FC-02 100 mm 30 mm (Derinlik) : 40 mm ve 50 mm uygulanabilir. uygulanabilir (Depth) : 40 mm and 50 mm adaptable Ãëóáèíà: 40 mm ìîãóò áûòü 50mm àäàïòèðîâàíû 51 FC-03 100 mm 30 mm FC-04 100 mm 30 mm FC-05 -05 100 mm 30 mm FC-06 FC-0 290 mm 30 mm m FC-07 -07 290 mm 30 0 mm 52 HARPUÞTALAR copings ÏÅÐÅÊÐÛÂÀÞÙÈÅ ÏËÈÒÛ HP--01 152 mm 295 mm 210 mm HP-02 235 mm 385 mm 210 mm 53 HP-03 175 mm 300 mm 210 mm HP-04 170 mm 350 mm 210 mm HP-05 250 mm 345 mm 210 mm HP-06 370 mm 400 mm 210 mm 54 KÖÞE SÖVELER corner profiles ÓÃËÎÂÛÅ ÏÐÎÔÈËÈ Enjeksiyon Baský Olarak 175 x 175 x 30 mm Seçeneði Mevcuttur. We have 175 x 175 x 30 mm option with injection press. Èìååì ðàçìåð 175 õ 175 õ 30 ìì ñ ïîìîùüþ èíæåêöèîííîãî ïðåññà 55 óãîëîê-02 óãîëîê-05 200 mm óãîëîê-08 Köþe-07 30 mm 30 mm 3 óãîëîê-07 240 mm 30 mm 240 mm 160 mm Köþe-06 240 mm 240 mm t 30 mm óãîëîê-06 Köþe-05 Köþe-04 200 mm 30 mm 120 mm 120 mm óãîëîê-04 Köþe-03 160 mm 30 mm Köþe-02 120 mm 120 mm Ýç Köþe-01 óãîëîê-03 240 mm 40 mm 240 mm 56 Köþe-08 150 mm mm óãîëîê-01 30 mm 240 mm SÜTUNLAR columns ÊÎËÎÍÍÛ Êîëîííà -01 Sütun-01 üt 01 Êîëîííà -02 Sütun-02 Süt 02 Êîëîííà -03 Sütun-03 Süt 03 (Geniþlik/Width/ øèðèíà) : Uyarlanabilir/Adaptable/ìîãóò áûòü àäàïòèðîâàíû (Yükseklik/Height/ âûñîòà) : Uyarlanabilir/Adaptable/ìîãóò áûòü àäàïòèðîâàíû (Derinlik/Depth/ (Derinlik/Dept k ãëóáèíà) : Uyarlanabilir anabilir/Adaptable/ìîãóò ì áûòü àäàïòèðîâàíû òèðîâàíû Êîëîííà -04 Sütun-04 Êîëîííà -05 Sütun-05 Êîëîííà -06 Sütun-06 (Geniþlik/Width/ øèðèíà) : Uyarlanabilir/Adaptable/ìîãóò áûòü àäàïòèðîâàíû (Yükseklik/Height/ âûñîòà) : Uyarlanabilir/Adaptable/ìîãóò áûòü àäàïòèðîâàíû (Derinlik/Depth/ ãëóáèíà) : Uyarlanabilir/Adaptable/ìîãóò áûòü àäàïòèðîâàíû 57 SÜTUN BAÞ ve ALTLIKLARI column head and base ÊÀÏÈÒÅËÜ È ÁÀÇÀ ÊÎËÎÍÍÛ Áàçà êîëîííû êîëîííû-01 Sütun Baþý -01 Áàçà êîëîííû êîëîííû-02 Sütun Baþý -02 Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû Áàçà êîëîííû êîëîííû-04 Áàçà êîëîííû êîëîííû-05 Sütun Baþý -04 Sütun Baþý -05 Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû Áàçà êîëîííû êîëîííû-03 Sütun Baþý -03 Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû Áàçà êîëîííû êîëîííû-06 Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû Áàçà êîëîííû êîëîííû-07 Sütun Baþý -06 Sütun Baþý -07 Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ölçüler Uyarlanabilir Dimensions Can Be Adaptable Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû 58 Ðàçìåðû ìîãóò áûòü àäàïòèðîâàíû 59 60 61 HEED GROUP SANAYÝ VE TÝCARET LTD. Yeni Mahalle Atatürk Caddesi Kaþgarlý Mahmut Sokak No:2/6 Soðanlýk-Kartal/ÝSTANBUL Tel.: +90 216 377 41 01-11 Fax: +90 216 377 41 03 www.heedgroup.net
© Copyright 2024 Paperzz
