PRE-HEATER - ID Insert Deal

Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
PRE-HEATER
Pre-heater for cylinders and manifolds
FEATURES
Pre-heater for gas cylinders and ID Insert
Deal manifolds.
Made in chrome-plated brass. Lower bowl
made of plastic.
Inlet pressure up to 220 bar (3190 psi).
Suitable for inert gases. Not suitable for
gases that are: reactive, corrosive,
combustible.
Its high power of heat exchange
guarantees the removal of the frost effect
on the pressure regulator.
The product complies with the directives:
2006/95/EC (low voltage directive) and
2004/108/EC (EMC directive).
Fare
clic qui per immettere testo.
SPECIFICATIONS
Fare
clic~2,6
qui per
immettere
testo.
Weight
kg (~5,7
lb)
Working temperature: -20 °C ÷ +80 °C (-4 °F ÷ +176 °F)
Max working pressure: 220 bar for the standard version (3190 psi)
Power: 125W (200W available on request)
Voltage: 220V (110V and 48V available on request)
Degree of protection: IP20
Two thermostats :
One with an automatic fixed setting of 70°C (158 °F).
One for safety at 80°C (176 °F) with manual reset.
Red light, turned on when the resistor is working
Connections IN/OUT inert gas: W21,7 x 1/14”
MATERIALS
Body and fittings: chrome-plated brass
Lower bowl: PA 6,6 + FG 30%
Cylindrical filters: Brass
Gaskets: EPDM
ACCESSORIES
Wall mounting bracket P36035030304
SPARE PARTS
Complete kit includes: resistor, thermostats, o-rings, cylindrical filters, red light.
Copyright © ID Insert Deal S.r.l. - All rights reserved
2
available model types
Preriscaldatori
Pre-heater
DESCRIPTION
PS bar
CARATTERISTICHE CONNECTION
ELETTRICHE
IN
CONNECTION
OUT
CODE
MEDIUM
VP
Preriscaldatore per
rampa-bombola
Pre-heater for bottle
Preriscaldatore
a parete
Wall mounted
pre-heater
Preriscaldatore per
rampa-bombola
Pre-heater for bottle
Preriscaldatore
a parete
Wall mounted
pre-heater
MAX 220
125 W - 230 V
AC 50 Hz
MAX 220
125 W - 230 V
AC 50 Hz
MAX 220
200 W - 230 V
AC 50 Hz
MAX 220
200 W - 230 V
AC 50 Hz
W 21,7 x 1/14" - M
VP
CO2 + gas inerti *
CO2 + inert gases *
W 21,7 x 1/14" - M W 21,7 x 1/14" - M
VP
CO2 + gas inerti *
CO2 + inert gases *
W 21,7 x 1/14" - M
VP
CO2 + gas inerti *
CO2 + inert gases *
W 21,7 x 1/14" - M W 21,7 x 1/14" - M
VP
CO2 + gas inerti *
CO2 + inert gases *
2-UNI 11144
2-UNI 11144
* Gas inerti / Inert gases: Aria - N2 - He - Ar - CO2
ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD
Attacchi diversi da standard / Connection different from standard
Copyright © ID Insert Deal S.r.l. - All rights reserved
3
generating the product code
PRERISCALDATORI
A B C DD EE F GG
A
Tipo preriscaldatore / Pre heater type
B
C
Materiale / Material
Tensione e potenza / Tension and power
DD
Tipologia di fluido / Fluid type
EE
F
GG
Pressione ingresso / Inlet pressure
Marchiato / Marked
Accessori / Accessories
2
4
1
B
L
01
U2
J0
I
00
Rampa - bombola
A parete
Ottone
125 Watt - 230 Volt - AC 50Hz
200 Watt - 230 Volt - AC 50Hz
EPDM - IN/OUT diam 21,7x14 fil 1" M
2 - UNI 11144
P Max 220 bar
ID
Nessun accessorio
CODE COMPOSITION EXAMPLE
VP# 2 1 L U2 J0 I 00
VP#: Pre-heater
2: For manifold or cylinder
1: Brass
L: 220 W, 230 V, AC 50 Hz
U2: 2-UNI 11144 connections
J0: Maximum inlet pressure 220 bar (3190 psi)
I: Insert Deal
00: No accessories
Copyright © ID Insert Deal S.r.l. - All rights reserved
4
technical drawings (all dimensions in [mm])
167
PRERISCALDATORE PER RAMPA
PRE-HEATER FOR MANIFOLD
60
IN
OUT
140
W21.7x1/14"
W21.7x1/14"
23
115
67
56
PRERISCALDATORE A PARETE
WALL MOUNTED PRE-HEATER
6,5
115
66
47
82
140
161
W21.7x1/14"
W21.7x1/14"
23
44
60
56
Copyright © ID Insert Deal S.r.l. - All rights reserved
5
ID Insert Deal Srl
Strada dei Boschi, 40
20852 Villasanta (MB) Italia
tel. +39 039 302035
[email protected]
www.idinsertdeal.com
ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso.
ID Insert Deal reserves the right to change and/or modify product specifications without prior notice.
Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l’idonea scelta, uso e
manutenzione di qualsiasi prodotto ID rimane interamente a carico dell’acquirente.
Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and
maintenance of any ID products remains entirely to the purchaser.
Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl.
Reproduction forbidden. All rights reserved; the hereby document can’t be reproduced, also partially, without the authorization of ID Insert Deal Srl.
VP - VP_EN_00.docx
Azienda con sistema di gestione qualità certificato.
certificato N° 50 100 9191
Company with certificated quality management system.
certificate N° 50 100 9191
Copyright © ID Insert Deal S.r.l. - All rights reserved
6

Download Report