Standard Linear tables series

Quality and custom applications
Standard Linear tables series
TC
High-tech Italian Product
Tables TC series
Pg. 4
Overall dimensions and fastening
Features of the screws
Pg. 5
Movement linearity accuracy
Total weights and weights of the trolleys
Pg. 6
Admissible torques
Admissible loads
Certified according to
UNI EN ISO 9001:2008
Tables TC series
Tables TC series
Anodized aluminium structure, ball screw
Tavole
control,
lineari di precisione, componibili per il montaggio X Y Z e multiasse.
guides with bearing sliders,Motorizzabili
sheet rigid protections
con comando CNC, movimento su guide a rulli e viti a ricircolo di sfere.
Anodized aluminium structure, ball screw control,
guides with bearing sliders, sheet rigid protections
Overall dimensions and fastening
F
E
C (corsa)
G
45°
H
B
H1
M 4 n°4 fori
sul Ø 52
1
Table TC90 / 120
Ø 40
8
P
30
Accuracy mm.
L3
L1
Type of table
C
D
100
220
200
320
300
300
420
120
120
280
220
380
TC 90
90
200
TC 120
220
50
120
D
E
100
F-G
10
H
H1
25
46
L1
80
L2
P
2x30
4x40
2x40
3x80
2x50
4x80
L3
20
35
62
100
2x40
80
480
4x100
420
420
580
5x100
Load (N)
Accuracy
rating
e/300
mm
Max. axial
clearance
mm.
stat.
dyn.
IT7
0,06
0,02
4900
4000
TC 90
16
5
Travel mm.
TC 90
100
200
300
Total weight Kg
2,9
3,5
4,1
80
100
0,9
TC 120
120
220
320
420
Total weight Kg
4,5
5,5
6,5
7,5
Trolley weight Kg
100
320
rettif.
0,06
Trolley weight Kg
3x100
120
Pitch mm.
L4
4x50
66
Diam. mm
0,05
Type of table
320
Type of screw
0,04
Total weights and weights of the trolleys, according to
travels expressed in kg.
20
Features of the screws
Tavola
> 300
M5
Dimensions (mm)
100
150 - 300
L4
10
B
< 150
12
L2
Ø 5,5
A
Measurement on the horizontal or vertical
surface of the table; maximum values expressed
in millimetres
Travel mm.
Ø 6 h6
A
Movement linearity accuracy
1,15
1. Linear velocity of the table: max. 300 mm/sec.
2. Repositioning repeatability: +/- 0.03 mm
3. Resolution: according to the controlling and measuring system in use (e.g. pitch 8/400 pulses
per revolution = 0.02 mm)
Accessories UPON REQUEST
• Motor support
• Direct assembly: support + joint for motor connection
• Indirect assembly: by means of a drive plate with pulleys and a positive drive belt, velocity
ratio 1:1 – 1:2 or others.
• Assembly of tables in the x-y position.
• This type of assembly can be directly accomplished by overlapping the base of a table on the trolley of
another one without any intermediate element.
• Limit stop (for mod. Tc120 only)
• 2 inductive proximity switches applied inside the table + flying cable.
TC 120
4
Tables TC series
Tables TC series
5
Tables TC series
Anodized aluminium structure, ball screw
Tavole
control,
lineari di precisione, componibili per il montaggio X Y Z e multiasse.
guides with bearing sliders,Motorizzabili
sheet rigid protections
con comando CNC, movimento su guide a rulli e viti a ricircolo di sfere.
Starting from your own needs
for building together the solution.
Admissible torques (Nm)
MT
MR
MR
ML
Table
St.
Dyn.
St.
Dyn.
St.
Dyn.
Tc90
15
9
32
19
14
8,5
Tc120
25
15
49
29
19
11,5
ML
MT
Applicable loads (N)
FV
FV
FL
FL
Table
FL
St.
Dyn.
St.
Dyn.
Tc90
600
360
1300
780
Tc120
720
430
1620
970
Note:
The loads specified by the tables shall be considered as maximum theoretical values; apply coefficients
of reduction (0.2 - 0.5), considering the maximum speed, the frequency of movements, the system rigidity
and accuracy.
MECCANICA BESNATESE Certified
according to UNI EN ISO 9001:2008
6
Tables TC series
Meccanica Besnatese has always been the
ideal partner for those looking for a company
that can design and develop linear tables
adaptable to any technology sector.
Whatever may be the project requirements,
Meccanica Besnatese provides versatility for
every solution.
Meccanica Besnatese s.r.l.
P. Iva 00184580124
[email protected] - Via Alfredo Di Dio, 47
21010 Besnate (VA) - Italy - Tel. +39 0331 274078 - Fax +39 0331 272328
www.meccanicabesnatese.com

Download Report