nebula SPI Surge Protector Injector surge SPIprotector stages 3res-tvs-gdt kA peak 15surge current A-B PoE modes power over Po4Pfour pairs galvanic LANisolated Passive Gigabit PoE Injector with High Power Surge Protection Electrical Specifications Max Voltage 60 Volts AC/DC Max Current 1.5 A Power Connector 3 mm2 wires terminal blocks Ethernet Connectors Shelded RJ45 Jack, Plastic RJ45 Jack (galvanic isolated LAN) GND Connector 4 mm lug Data Lines Pair 1: Pins 1 and 2 Pair 2: Pins 3 and 6 Pair 3: Pins 4 and 5 Pair 4: Pins 7 and 8 Power Lines (connector 1) +/- VDC: Pins 4 & 5 +/- VDC: Pins 7 & 8 Status led on front Power Lines (connector 2) +/- VDC: Pins 1 & 2 +/- VDC: Pins 3 & 6 Status led on front Spark Over Voltage 90 Volts Peak Surge Current 15kA Modes of Protection All Lines (1-8) Protected (L-L) and (L-G) Transmission Speeds 10BaseT; 100BaseT; 1000BaseT SPD Technology 3 stages: Resistor, TVS, GDT Warranty 2 years from date of purchase Mechanical Specifications 1: Mode B, pairs 4,5 / 7,8 DATA + Power 2: Mode A, pairs 1,2 / 3,6 Enclosure Material ABS Operating Temperature -40°C to +80°C Dimensions 119x101x22.5 mm Weight 0.1 kg Rohs Compliant Yes Mounting Din Rail DIN Rail Mounting galvanic isolated LAN GND Lug TERMS OF USE: This device must be professionally installed. Shielded ethernet cable and earth grounding must be used as conditions of product warranty. All specifications in this document are subject to change without notice. For further information please visit www.flycommunications.net.
© Copyright 2024 Paperzz