ҩည٧͇ ఄᑞҩညഴڰ CONTENTS ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ ■ MOS-IPM ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ www.rohm.com.cn P. B12 P. B12 B ఄᑞҩညഴڰ ■ IGBT-IPM ҩည٧͇ ఄᑞҩညഴڰ ▶ఄᑞҩညഴڰ ఄᑞҩညഴڰ ●ঋᤳԟᏥ IGBT-IPM Low Speed Switching Type less than 6kHz MOS-IPM High Speed Switching Type less than 20kHz ID / IC (A) VDSS / VCES (V) HSDIP25 HSDIP25-VC 10 ☆BM63363S-VA ☆BM63763S-VA − 15 ☆BM63364S-VA ☆BM63364S-VC ☆BM63764S-VA ☆BM65364S-VA 20 − BM63165S-VA − 600 ☆ ὙधԦ˖ ఄᑞҩညഴڰ IGBT-IPM Power Device VCES (V) IC (A) Vce(sat) (V) Recomended Switching Frequency (kHz) Isolation Voltage * (Vrms) BM63165S-VA IGBT 600 20 1.6 less than 20 1500 HSDIP25 ☆BM63363S-VA IGBT 600 10 1.5 less than 6 1500 HSDIP25 ☆BM63763S-VA IGBT 600 10 1.7 less than 20 1500 HSDIP25 ☆BM63364S-VA IGBT 600 15 1.5 less than 6 1500 HSDIP25 ☆BM63364S-VC IGBT 600 15 1.5 less than 6 1500 HSDIP25VC ☆BM63764S-VA IGBT 600 15 1.7 less than 20 1500 HSDIP25 Power Device VCES (V) IC (A) Ron (mΩ) Recomended Switching Frequency (kHz) Isolation Voltage * (Vrms) MOSFET 600 15 120 less than 20 1500 Part no. Package MOS-IPM Part no. ☆BM65364S-VA Package HSDIP25 Ą ὙAC60HzNj1minNjၸѠۋབྞௐஂ2500Vrms ☆ ὙधԦ˖ ●ழಳڎ IGBT-IPM B 24 P VBU 2 Bootstrap Diode VBV 3 HVIC ( High-side Gate Driver ) 23 U VBW 4 High Side Gate Driver (HVIC) ఄᑞҩညഴڰ ・ᒬˠ̃ክ ・ᒬˠ̃ክႂึᬌ҃ҩᑞ ・๎Үႂຸ67-0 22 V HINU 5 HINV 6 HINW 7 Inverter Part (IGBT and FWD) 21 W HVCC 8 LVIC( Low-side Gate Driver) GND 9 ・ͯ૮Ᏹڣൢ᥊*(#5 LINU 10 ・67-04$154% LINV 11 20 NU ・ᡓͯ7'ঋᤳু̃ܬክ LINW 12 LVCC 13 ・'BVMUζՁᣤѢ Low Side Gate Driver (LVIC) FO 14 19 NV γએႂᡸ 67-0ൢႂຸႂԌͯௐឧҮͺ 4$1ᆀᡸႂึγએ 54%བСற CIN 15 GND 16 18 NW ●ࡆࠩ HSDIP25VC A (3.3) 0.42 0.8 HEAT SINK SIDE 1.5MIN 0.5 14×2.54(=35.56) 0.5 0.5 (2.656) (1.2) (2.756) HEAT SINK SIDE DETAIL B DETAIL A ᜈ S -xx ӉᜈNj्ಪ HSDIP25 HSDIP25VC VA VC (1.2) 0.5 Tube, Long pin type (HSDIP25) Tube, Staggered type (control side) (HSDIP25VC) www.rohm.com.cn (0∼5° ) (0∼5° ) 8−0.6 (1.2) 14±0.5 (2.656) B M 6 3 3 6 4 S B12 0.42 4−C1.2 0.28 2.54±0.2 ●ֵՏౝឬ ᬃҪᎃՁ 33.7±0.5 Type name Lot No. 3MIN 1.5±0.05 B 2.5MIN 0.5 0.5 5.5±0.5 HEAT SINK SIDE 2−R1.6 Specular surface finish 1.5MIN (0∼5° ) 0.5 24±0.5 (3.5) (3.3) HEAT SINK SIDE 14×2.54(=35.56) 0.5 3.5±0.25 16−0.5 8.0 0.8 0.42 0.28 2.54±0.2 A 35.0±0.3 9.5±0.5 8 4−C1.2 8−0.6 0.28 1.778±0.2 5.5±0.5 Type name Lot No. 3MIN Specular surface finish 29.4±0.5 24±0.5 8 B 14.4±0.5 14.4±0.5 1.778±0.2 20×1.778(=35.56) (3.5) 0.42 16−0.5 2−R1.6 1.5±0.05 0.42 35±0.3 0.28 3.8±0.5 3.5±0.25 8.0 3.8±0.5 20×1.778(=35.56) 29.2±0.5 14.4±0.5 18.9±0.5 14.4±0.5 HSDIP25 (1.2) (2.756) DETAIL A DETAIL B
© Copyright 2024 Paperzz