T +44 (0)1322 527 629
E [email protected]
www.lightgraphix.co.uk
LD151
Data sheet - Page 1
Design: Green Leaf Lighting Design
Project: Private Residence
Product: LD151
High Power Exterior LED Uplighter
A very powerful uplighter for its size and depth. The LD151 has been designed specifically to produce low glare illumination to exterior walls and columns. It can be used
for a wide range of project styles with a minimal aesthetic and no visible fixings. This is a very tough, high quality fitting, machined from high grade materials ensuring
excellent thermal and light output performance.
Key Features
- LED and lens assembly recessed within a black anodised body for reduced glare
- Glare shield developed to minimise the view of the intense light source without
affecting the wash of light on the wall/column
- Single optic produces a very consistent beam with no multiple shadows
- Tight 10° spot is available for lighting columns and arches or a 15°x 30° spreader
lens which is ideal for wall washing
- No visible fixings. O-rings on the body secure it into a first fix sleeve, creating a
water tight seal. A concrete housing and ground tube are also available
- RGBW LED option uses a larger optic, for a premixed light beam immediately
adjacent to the fitting
- Range of bezel finish options
- Available with Switch, 0-10V, DMX, Dali or Mains dimmable drivers
Specification
Applications
Beam Angles
LED type
Colour temperature
Current
LED power (Max)
CRI (Min)
10°, 15°x 30°
1 x Cree MKR 4 die LED with 2 Step Easy White
binning
2700K / 3000K
5000K
350mA
500mA
350mA
500mA
5W
7W
5W
7W
(4.4W)*
(6.3W)*
(4.4W)*
(6.4W)*
85
85
80
80
Forward voltage (V)100
14V
Delivered lumens (L100)** 307
Lumens per circuit watt*** 70
14V
416
66
14V
328
75
14V
445
71
LED lifetime (to 70%
lumen maintenance)
50,000hrs at a max ambient temperature of 35°C
(if higher ambient then run at 350mA up to 45°C)
Glass
Materials
6mm thick borosilicate
Black anodised aluminium body, Machine finish 316
stainless steel bezel (other options available)
Sleeve - Black Acetal
Comes pre-wired with 2 core 250mm lead. Can be
specified with up to 10m at extra cost.
IP67
Wiring
IP rating
*indicates the nominal power for the LED run at that particular current and includes losses
associated with using an 85% efficient driver
** lumen output indicated is without the glare shield. Allow 30% less with glare shield
*** data shown allows for an ambient temperature of 35°C
Data sheet issued: 19th May, 2014
LightGraphix reserve the right to change specifications without notice
T +44 (0)1322 527 629
E [email protected]
www.lightgraphix.co.uk
LD151
High Power Exterior LED Uplighter
Data sheet - Page 2
Dimensions and Fixing Options
The fitting is supplied as standard with a fixing sleeve; this is bonded into the mounting surface first. The LD151 is secured into the sleeve by 2 ‘O’ rings on the
body. When pushed into the sleeve it creates a watertight seal.
/484S First Fix Sleeve supplied as standard
/484GT - Ground tube
/484GT
In-ground Tube
The in-ground tube has been designed for applications where a recessed
uplighter is required in soil or gravel surfaces. The tube can be buried with the
necessary wiring, and then the fitting installed after the landscaping work has
been completed. It is supplied with the fixing sleeve bonded into the tube, and
can be cut down on site.
2.5
5
/476GT
In-ground Tube
Ø81
2.5
/480GT
In-ground Tube
2.5
2.5
32
72
0.75
0.75
140
0.8
84.5
0.8
25.6
140
Ø73.2
140
Ø63
Cut-out
Ø70
300
300
220
25.6
200
/484N Concrete housing
/ID Optional integral non dimming driver (single colour only) to fit into
the housing
32
72
25.6
Ø73.2
Ø73.2
2.5
84.52.5
0.8
25
Ø72.5
25
25
25
Ø36.6
140
Ø83.3
Ø83.3
Ø50
91.4
0
2.5
2.5
0.8
0.8
Ø72.5
Ø72.5
Ø170
25.6
24
Ø73.2
Ø77.5
91.4
91.4
Ø170
Ø170
Ø72.5
0.8
24
24
2.5
2.5
Ø77.5
Ø77.5
Ø72.5
0.8
0.8
Ø72.5
91.4
0.8
0.8
Ø72.5
Ø72.5
91.4
91.4
Ø170
Ø170
24
24
Ø170
91.4
91.4
24
Ø77.5
Ø72.5
0.8
LD151 / 484N
32
Data sheet issued: 19th May, 2014
72
84.5
LightGraphix reserve the right to change specifications without notice
Ø170
Ø170
24
24
91.4
T +44 (0)1322 527 629
E [email protected]
www.lightgraphix.co.uk
LD151
High Power Exterior LED Uplighter
Data sheet - Page 3
Lens Options
/NB - 10° spot
Photometrics
/OB - 15°x 30° spreader
Photometric files are included in the design pack which can be
downloaded from the LD151 product page on the website.
RGBW - 26deg colour mix
The centre of the LD150 is positioned 125mm from the wall (2.5m high) in these photos.
Order Codes and Options
Product code
LD151 - 350
- 500
LED colour
Lens angle
Bezel finish
Accessory
Example: LD151-350 / LW30 / 10 / Stainless Steel / 484N / ID
Design: Into Lighting Design
Project: Buddha Bar, London
Product: LD151
Product codes with output options
LD151-350
LD151-500
5W 350mA
7W 500mA
LED colour options
Suffix
Extra Warm White (2700K)
Warm white (3000K)
Cool White (5000K)
RGBW (White is 4000K)
/LW27
/LW30
/LW50
/RGBW
Beam / lens angle options
10° narrow spot
15° x 30° oval spreader beam
RGBW LED comes with a 26° lens
/NB
/OB
Bezel finish options
Stainless steel 316
Powder coated white / black (interior use only)
Polished and passivated stainless steel (for marine environments)
Flamed solid bronze (antique finish)
Fixing accessories
Comes as standard with /484S first fix sleeve
Concrete housing
with integral driver
/484N
/ID
Use with 350mA and 500mA constant current LED drivers
For our complete range of LED drivers please download the data sheet
from the downloads section at www.lightgraphix.co.uk
Data sheet issued: 19th May, 2014
LightGraphix reserve the right to change specifications without notice