Plans for this week • Preparation of Master course ... • Push Thorlabs and order in worst case what is already available • Work on DNA setup • MWPC: Stretch 4 wires on new PCB for testing or electronics tests • DAQ discussion with Joan (already started) • 3D MPGD project: FET Open proposal, phone meeting to discuss status and plans Kaputschinsky LED Driver Tests • LED driver allows to produce light pulses of <= 10 ns width • What is the power we can detect with photodiode 6 cm away from LED • Pulsed with 1 kHz (readout speed of photodiode 10-20 Hz) LED Photo diode Kaputschinsky LED Tests Laser + Diffusor Tests Photodiode Continous laser operation Diffusor Laser Solar Cell Tests • testing response of solar cell to laser light • photodiode in parallel to be sure that we see light • laser pulsed Response • pulsing down to 1 Hz possible • but difficult to control power output • minimum width of 200 us • even at higher frequencies not linear in power Plans for this week • Continuing of preparation of Master course ... • First Thorlabs pieces will arrive today => start playing with them • Work on DNA setup • MWPC: Stretch 4 wires on new PCB for testing, fixing current PCB, analysing data from this week • 3D MPGD project: Minutes of this week meeting and preparing meeting of next week
© Copyright 2026 Paperzz