SilkTek™ is the latest
innovation in waterslides
where we use a closedmoulded process (RTM)
to engineer the ultimate
waterslide.
BODY SLIDES FACTS & FIGURES:
• PoolSider
INNER-TUBE FACTS & FIGURES:
(open flume)
Typical width:
3 feet (0.914m)
Typical length:
50 - 200 feet (15m - 65m)
Typical height:
20 feet (6.096m)
Slope:
14%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• AquaTube
Giant Slide
(enclosed flume)
(open flume)
Typical width:
3.667 feet (1.118m)
Typical length:
200 - 400 feet (60m - 120m)
Typical height:
35 feet (10.668m)
Slope:
12% - 13%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
(open flume)
Inner-Tube CTR-210
(open flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
Typical width:
2.667 feet (0.813m)
Typical length:
120 - 300 feet (35m - 90m)
Typical height:
35 feet (10.668m)
Slope:
15% - 19%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
ADVANCED
FIBERGLASS
TECHNOLOGY
Inner-Tube CTR-140
Typical width:
7 feet (2.134m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
10.5% - 11.5%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• Giant AquaTube
(enclosed flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
•smooth inside & out
•low maintenance
WhiteWater manufactures a complete line of products for the Community market including waterslides,
AquaPlay multi-level play structures, Wave pools and Prime Play soft modular play systems.
•consistent thickness
•perfectly smooth joints
•superior appearance
•no whiting or wicking
•easy to keep clean
community waterslide guide
Large or small, indoor or outdoor, entry level or expert;
WhiteWater waterslides have something for everyone.
WhiteWater - USA Office
519 S. Forth Street, Columbus, OH 43206
Toll Free: 1-800-775-4337
Tel: 614-857-9200 Fax: 614-857-1559
[email protected]
OFFICES WORLDWIDE: USA, Europe, Asia, Middle East, Canada
Printed in Canada
WHITEWATER MUNICIPAL BROCHURE
Size: FLAT: 23.875” x 10.5” Folded to : 8” x 10.5”
CMYK 9/12/07 FD#: 3857
INSIDE FLAP page 5
www.whitewaterwest.com
09/07
BACK COVER page 6
FRONT COVER page 1
Body Slides
Inner-Tube
The original waterslide.
WhiteWater body slides are a
tried, tested, and true favorite.
WhiteWater’s inner-tube series is a great way
to maximize ride capacity, safety and fun.
Available in a variety of configurations including twist,
turns and drops suitable for guests of all ages and sizes.
Single, double and triple inner-tubes allow guests to
share the experience.
Add some thrills
with a Drop Slide!
WhiteWater manufactures a
complete line of Community
products including the highly
popular PoolSider as well as a
variety of open and enclosed
flume waterslides.
Fiberglass color charts are available for your
selection with over 50 color options including
translucent alternatives.
Inner-tubes ensure a steady
consistent flow and assist those less
comfortable in the water when they
splash down in the exiting pool.
This short length slide
drops participants up to
6 feet into a pool, and is
available in an open or
enclosed flume.
Our designers have mastered
the art of slide path design
by creating custom fit
waterslides that deliver a full
range of ride experiences.
These commercial products come
in a variety of configurations
and are specially designed
and engineered to fit any
space and budget.
www.whitewaterwest.com
INSIDE page 2
INSIDE page 3
INSIDE page 4
Body Slides
Inner-Tube
The original waterslide.
WhiteWater body slides are a
tried, tested, and true favorite.
WhiteWater’s inner-tube series is a great way
to maximize ride capacity, safety and fun.
Available in a variety of configurations including twist,
turns and drops suitable for guests of all ages and sizes.
Single, double and triple inner-tubes allow guests to
share the experience.
Add some thrills
with a Drop Slide!
WhiteWater manufactures a
complete line of Community
products including the highly
popular PoolSider as well as a
variety of open and enclosed
flume waterslides.
Fiberglass color charts are available for your
selection with over 50 color options including
translucent alternatives.
Inner-tubes ensure a steady
consistent flow and assist those less
comfortable in the water when they
splash down in the exiting pool.
This short length slide
drops participants up to
6 feet into a pool, and is
available in an open or
enclosed flume.
Our designers have mastered
the art of slide path design
by creating custom fit
waterslides that deliver a full
range of ride experiences.
These commercial products come
in a variety of configurations
and are specially designed
and engineered to fit any
space and budget.
www.whitewaterwest.com
INSIDE page 2
INSIDE page 3
INSIDE page 4
Body Slides
Inner-Tube
The original waterslide.
WhiteWater body slides are a
tried, tested, and true favorite.
WhiteWater’s inner-tube series is a great way
to maximize ride capacity, safety and fun.
Available in a variety of configurations including twist,
turns and drops suitable for guests of all ages and sizes.
Single, double and triple inner-tubes allow guests to
share the experience.
Add some thrills
with a Drop Slide!
WhiteWater manufactures a
complete line of Community
products including the highly
popular PoolSider as well as a
variety of open and enclosed
flume waterslides.
Fiberglass color charts are available for your
selection with over 50 color options including
translucent alternatives.
Inner-tubes ensure a steady
consistent flow and assist those less
comfortable in the water when they
splash down in the exiting pool.
This short length slide
drops participants up to
6 feet into a pool, and is
available in an open or
enclosed flume.
Our designers have mastered
the art of slide path design
by creating custom fit
waterslides that deliver a full
range of ride experiences.
These commercial products come
in a variety of configurations
and are specially designed
and engineered to fit any
space and budget.
www.whitewaterwest.com
INSIDE page 2
INSIDE page 3
INSIDE page 4
SilkTek™ is the latest
innovation in waterslides
where we use a closedmoulded process (RTM)
to engineer the ultimate
waterslide.
BODY SLIDES FACTS & FIGURES:
• PoolSider
INNER-TUBE FACTS & FIGURES:
(open flume)
Typical width:
3 feet (0.914m)
Typical length:
50 - 200 feet (15m - 65m)
Typical height:
20 feet (6.096m)
Slope:
14%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• AquaTube
Giant Slide
(enclosed flume)
(open flume)
Typical width:
3.667 feet (1.118m)
Typical length:
200 - 400 feet (60m - 120m)
Typical height:
35 feet (10.668m)
Slope:
12% - 13%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
(open flume)
Inner-Tube CTR-210
(open flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
Typical width:
2.667 feet (0.813m)
Typical length:
120 - 300 feet (35m - 90m)
Typical height:
35 feet (10.668m)
Slope:
15% - 19%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
ADVANCED
FIBERGLASS
TECHNOLOGY
Inner-Tube CTR-140
Typical width:
7 feet (2.134m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
10.5% - 11.5%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• Giant AquaTube
(enclosed flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
•smooth inside & out
•low maintenance
WhiteWater manufactures a complete line of products for the Community market including waterslides,
AquaPlay multi-level play structures, Wave pools and Prime Play soft modular play systems.
•consistent thickness
•perfectly smooth joints
•superior appearance
•no whiting or wicking
•easy to keep clean
community waterslide guide
Large or small, indoor or outdoor, entry level or expert;
WhiteWater waterslides have something for everyone.
WhiteWater - USA Office
519 S. Forth Street, Columbus, OH 43206
Toll Free: 1-800-775-4337
Tel: 614-857-9200 Fax: 614-857-1559
[email protected]
OFFICES WORLDWIDE: USA, Europe, Asia, Middle East, Canada
Printed in Canada
WHITEWATER MUNICIPAL BROCHURE
Size: FLAT: 23.875” x 10.5” Folded to : 8” x 10.5”
CMYK 9/12/07 FD#: 3857
INSIDE FLAP page 5
www.whitewaterwest.com
09/07
BACK COVER page 6
FRONT COVER page 1
SilkTek™ is the latest
innovation in waterslides
where we use a closedmoulded process (RTM)
to engineer the ultimate
waterslide.
BODY SLIDES FACTS & FIGURES:
• PoolSider
INNER-TUBE FACTS & FIGURES:
(open flume)
Typical width:
3 feet (0.914m)
Typical length:
50 - 200 feet (15m - 65m)
Typical height:
20 feet (6.096m)
Slope:
14%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• AquaTube
Giant Slide
(enclosed flume)
(open flume)
Typical width:
3.667 feet (1.118m)
Typical length:
200 - 400 feet (60m - 120m)
Typical height:
35 feet (10.668m)
Slope:
12% - 13%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
(open flume)
Inner-Tube CTR-210
(open flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
Typical width:
2.667 feet (0.813m)
Typical length:
120 - 300 feet (35m - 90m)
Typical height:
35 feet (10.668m)
Slope:
15% - 19%
Capacity per hour:
180 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
ADVANCED
FIBERGLASS
TECHNOLOGY
Inner-Tube CTR-140
Typical width:
7 feet (2.134m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
10.5% - 11.5%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
• Giant AquaTube
(enclosed flume)
Typical width:
4.5 feet (1.372m)
Typical length:
250 - 450 feet (75m - 140m)
Typical height:
40 feet (12.192m)
Slope:
11% - 12%
Capacity per hour:
300 - 450 people
Speed (feet & metres per second):14-18 f/s (4.2 - 5.4 m/s)
•
Available in SilkTek™
•smooth inside & out
•low maintenance
WhiteWater manufactures a complete line of products for the Community market including waterslides,
AquaPlay multi-level play structures, Wave pools and Prime Play soft modular play systems.
•consistent thickness
•perfectly smooth joints
•superior appearance
•no whiting or wicking
•easy to keep clean
community waterslide guide
Large or small, indoor or outdoor, entry level or expert;
WhiteWater waterslides have something for everyone.
WhiteWater - USA Office
519 S. Forth Street, Columbus, OH 43206
Toll Free: 1-800-775-4337
Tel: 614-857-9200 Fax: 614-857-1559
[email protected]
OFFICES WORLDWIDE: USA, Europe, Asia, Middle East, Canada
Printed in Canada
WHITEWATER MUNICIPAL BROCHURE
Size: FLAT: 23.875” x 10.5” Folded to : 8” x 10.5”
CMYK 9/12/07 FD#: 3857
INSIDE FLAP page 5
www.whitewaterwest.com
09/07
BACK COVER page 6
FRONT COVER page 1