5400-20
CNC Mill Training System (Light Duty)
LabVolt Series
Datasheet
Festo Didactic
en 120 V - 60 Hz
07/2017
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Table of Contents
General Description _______________________________________________________________________2
Features & Benefits _______________________________________________________________________2
List of Equipment_________________________________________________________________________3
List of Manuals___________________________________________________________________________3
Table of Contents of the Manual(s) __________________________________________________________3
Additional Equipment Required to Perform the Exercises ________________________________________3
Optional Equipment_______________________________________________________________________3
System Specifications _____________________________________________________________________4
Equipment Description ____________________________________________________________________4
Optional Equipment Description ____________________________________________________________9
General Description
The CNC Mill Training System provides training in computer-aided manufacturing (CAM) using a
microprocessor-driven, light-duty CNC mill. The system allows students to practice computer numerical
controlled (CNC) code programming and editing, learn to operate mill components, controls, and tools, set a
programmed reference zero, follow the steps necessary to machine a part to programmed specifications, and
apply the machine code language to current mill technology.
A computer is used to create NC part programs with the G and M machine codes or their conversational code
equivalents. The created programs are downloaded to the on-board microprocessor of the CNC mill, which
stores and executes them. Since the CNC mill connects directly to the serial or Ethernet port of a computer, or
directly to a network, no additional interface card is required. The computer is free to be used for any additional
applications, since it is not dedicated to the control of the mill.
The CNC Mill Training System comprises the accessories, software, and cables required for system operation.
These include a vise, a basic milling set, 100 blocks of industrial machinable wax, a serial cable, a cross-over
Ethernet cable, and the CNC Mill Software, Model 5660.
The training system also includes two user guides. The first user guide allows students to acquire experience
with the equipment commonly found in automated manufacturing environments. The second user guide covers
the operation of the CNC Mill Software.
Various assortments of milling tools and stock materials of different sizes are offered as options to enhance and
expand system capabilities.
Features & Benefits
•
•
•
•
•
•
•
•
•
2
Key-released emergency stop push button
Ability to restart programs from stopping point after safety interruption
On-board embedded microprocessor
Computer free to be used for other applications since it is not dedicated to the control of the mill
Stand-alone manual mode operation
Batch mode for independent operation or operation in CIM Cells
Software included with full 3D tool path emulator and easy-to-use graphical interface allowing the programming of
up to twenty tools
12-key membrane keypad with 20-character by 4-line LCD display
Feed-rate and spindle-speed override capability
Removable side panel for access to robot
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
•
Connects to host computer through RS-232 or Ethernet port
List of Equipment
Qty Description
1
1
1
1
CNC Mill (Light Duty) ____________________________________________________________________
Wax Milling Stock Set ___________________________________________________________________
Fabricus Software (Domestic Market) - 1 User _______________________________________________
CNC Mill Software - 1 User _______________________________________________________________
Model
number
5400-B0
5404-00
5460-00
5660-00
List of Manuals
Manual
number
CNC Mill Software (User Guide) ______________________________________________________________ 36189-E0
Description
Fabricus® (Quick Start Guide) _______________________________________________________________ 37863-E0
CNC Mill (Light Duty) (User Guide) ____________________________________________________________ 39547-E0
Table of Contents of the Manual(s)
CNC
•
•
•
•
•
Mill Software (User Guide) (36189-E0)
0 Installation of the CNC Lathe/Mill Software
1 Overview of the CNC Mill Software
2 Menus
3 The Part Program Editors
4 Tutorial Exercises
Fabricus® (Quick Start Guide) (37863-E0)
•
0 Introduction
•
1 Installation
•
2 Using Fabricus Software
•
3 Creating Parts
CNC
•
•
•
•
•
•
Mill (Light Duty) (User Guide) (39547-E0)
1 Overview and Installation
2 Tools and Accessories
3 Using the Mill Interface
4 Milling Stock
5 Tutorial Exercise
6 Maintenance
Additional Equipment Required to Perform the Exercises
Model
number
Personal Computer _____________________________________________________________________ 8990-00 1
Training on CNC Mill (Light Duty), 0.6 day __________________________________________________ 39547-TF 2
Qty Description
1
1
Optional Equipment
1 Refer to the Computer Requirements in the software Specifications section of this datasheet if the computer is to be provided by the end-user.
2 Optional product training. Price provided on demand. For details and options, contact [email protected].
© Festo Didactic
3
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Model
number
Wax Milling Stock Set ___________________________________________________________________ 5403-00
Wax Milling Stock Set ___________________________________________________________________ 5404-00
Plexiglass Milling Stock Set ______________________________________________________________ 5405-00
Plexiglass Milling Stock Set ______________________________________________________________ 5406-00
Engraving Plate Set _____________________________________________________________________ 5407-00
Plexiglass Milling Stock Set ______________________________________________________________ 5408-00
Aluminum Milling Stock Set ______________________________________________________________ 5409-00
End Mill Set ___________________________________________________________________________ 5413-00
Intermediate Milling Set _________________________________________________________________ 5414-00
Engraver Tool Set (Project Lead the Way) ___________________________________________________ 5419-00
Pneumatic Vise ________________________________________________________________________ 5434-00 3
Plexiglass Milling Stock Set ______________________________________________________________ 5441-00
Mill Tool Set __________________________________________________________________________ 32933-00
Hold-Down Set _______________________________________________________________________ 95331-00
Mill Vise _____________________________________________________________________________ 97062-00
Qty Description
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
System Specifications
Parameter
Value
Power Requirements
Current
2A
Service Installation
Standard single-phase ac outlet
Physical Characteristics
Intended Location
On a table able to support the weight of the equipment
Dimensions (H x W x D)
750 x 864 x 597 mm (29.5 x 34 x 23.5 in)
Net Weight
70.3 kg (155 lb)
Equipment Description
CNC Mill (Light Duty)
5400-B0
The CNC Mill can machine pieces of
soft materials such as wax and
plexiglass, as well as harder materials
such as aluminum and brass. It
consists of a milling table, a headstock
carrying the spindle motor, and a
vertical column with dovetail slide. The
stock can either be mounted directly
on the mill table or secured in a vise
that holds it to the table. Two lead
screws, each driven by a stepper
motor, are used to move the table
along the X axis (left and right) and Y axis (backward and forward) to feed the stock through the periphery of the
end mill. A third lead screw, also driven by a stepper motor, is used to move the headstock along the Z axis (up
and down) for positioning the end mill. The speed of each stepper motor can be programmed separately for
feed rates of up to 356 mm/min (14 in/min). A 60 W (0.08 hp) motor rotates the spindle at speeds
3 Requires compressed air
4
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
programmable up to 2800 r/min. The end mill can be changed to accommodate different stock materials and
milling designs.
The CNC Mill features a control panel that allows manual operation. This panel includes a multiple-line LCD
display, an easy-to-use membrane keypad, an error indicator/pause button, and a key-released emergency stop
push button. The mill parameters, including the spindle speed, the feed rate, the reference point, and the X, Y,
and Z axes coordinates can be set by accessing different menus. During the machining, the control panel
displays the X, Y, and Z axes coordinates, as well as the current feed and spindle speed.
The CNC Mill is designed for maximum safety. A safety door provides protection during machining. Magnetic
interlocks located on this door stop the spindle and the axes if the door is opened during machining. Limit
switches prevent over-travel of the spindle and table of the mill. Pressing the emergency stop push button on
the control panel powers off the spindle motor and stops the axes.
The CNC Mill supports low-voltage communications with robotic units to allow students to create automated
work cells, ideal for implementing computer-integrated manufacturing (CIM). For this purpose, the CNC Mill
features a 15-pin TTL/IO port providing four 5 V digital inputs and four 5 V digital outputs for TTL
communication to an automation work cell. This port can be connected, for example, to the Servo-Robot, Model
5250, offered as an option to achieve automatic loading and unloading of the stock with a robot arm. The CNC
Mill also features a 5-pin solenoid driver port providing connections for up to four auxiliary devices. This port
can be connected, for example, to the pneumatic control box of the optional Pneumatic Vise, Model 5434, to
achieve automatic clamping and unclamping of the stock loaded in the CNC Mill. The TTL/IO and solenoid driver
ports of the CNC Mill are M-code supported through the CNC Mill Software, Model 5660.
Manual
Manual
number
CNC Mill (Light Duty) (User Guide) ____________________________________________________________ 39547-E0
Description
Table of Contents of the Manual(s)
CNC
•
•
•
•
•
•
Mill (Light Duty) (User Guide) (39547-E0)
1 Overview and Installation
2 Tools and Accessories
3 Using the Mill Interface
4 Milling Stock
5 Tutorial Exercise
6 Maintenance
Specifications
Parameter
Value
Power Requirements
Current
2A
Service Installation
Standard single-phase ac outlet
Mechanical Working Range
X Axis (Longitudinally)
184 mm (7.25 in)
Y (Transversely)
102 mm (4 in)
Z Axis (Vertically)
159 mm (6.25 in)
Positioning
Repeatability
±0.025 mm (±0.001in)
Resolution
±0.00318 mm (±0.000125 in)
Milling Table
Surface
© Festo Didactic
69.9 x 330 mm (2.75 x 13 in)
5
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Parameter
Value
Hold-Down T Slots
6.35 mm (0.25 in) width, 38 mm (1.5-in) spacing
Maximal Table-to-Spindle Clearance
203 mm (8 in)
Cutting Spindle
Throat Clearance
88.9 mm (3.5 in)
Spindle Taper
No. 1 Morse
Spindle Nose Thread
0.75 in major diameter, 16 threads/in
Main Spindle Drive
Continuous Speed Range
0-2800 r/min
Motor
60 W (0.08 hp)
Feed Motors
Type
Stepper
Resolution
400 steps/rev
Rapid Traverse Speed
356 mm/min (14 in/min)
Square Wood Shims
Dimensions
47.63 x 47.63 x 9.53 mm (1.875 x 1.875 x 0.375 in)
Rectangular Wood Shim
Dimensions
152.4 x 76.2 x 9.53 mm (6 x 3 x 0.375 in)
Plexiglass Block
Dimensions
127 x 63.5 x 9.53 mm (5 x 2.5 x 0.5 in)
Engraving Plate Holder
Maximal Holding Dimensions
203.2 x 50.8 x 3.18 mm (8 X 2 X 0.125 in)
Small Mill Vise
Jaw Width
50.8 mm (2 in)
Opening Between Jaws
50.8 mm (2 in)
Accessories
Two clamps with screws and T-nuts to attach to the mill table
Large Mill Vise
Jaw Width
70 mm (2.76 in)
Opening Between Jaws
152.4 mm (6 in)
Accessories
four screws with T-nuts to attach to the mill table
Dial Indicator Set
Range
0-25.4 mm (0-1 in)
Graduation
0.0254 mm (0.001 in)
Accessories
Lever-released magnetic base and adjustable clamps
Null Modem Serial Cable
Length
3.05 m (10 ft)
Connectors
DB9 female/female
TTL/IO Cable
Length
3.05 m (10 ft)
Connectors
DB15 male/male
Ethernet Crossover Cable
Length
2.13 m (7 ft)
Connectors
RJ45 male/male
End Mills with Two Flutes
Types:
Square nose, 1 end, shank diameter of 9.525 mm (3/8 in), mill diameter of 3.175 mm (1/8 in)
Square nose, 1 end, shank diameter of 9.525 mm (3/8 in), mill diameter of 6.35 mm (1/4 in)
Square nose, 2 ends, shank diameter of 4.763 mm (3/16 in), mill diameter of 1.588 mm (1/16 in)
End Mills with Three Flutes
Types:
Ball nose, 1 end, shank diameter of 6.35 mm (1/4 in), mill diameter of 3.175 mm (1/8 in)
Square nose, 1 end, shank diameter of 6.35 mm (1/4 in), mill diameter of 3.175 mm (1/8 in)
Hold Down Set
Two strap clamps with bolts, T-nuts, washers, and various lengths of socket head cap screws
End Mill Holders
See Model 32933
Edge Finder
See Model 32933
Tool Set
Hex keys, wrench, and cleaning brush
Physical Characteristics
6
Intended Location
On a table able to support the weight of the equipment
Dimensions (H x W x D)
750 x 864 x 597 mm (29.5 x 34 x 23.5 in)
Net Weight
70.3 kg (155 lb)
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Wax Milling Stock Set
5404-00
The Wax Milling Stock Set includes
100 wax milling stocks. Each stock has
the following dimensions: 50.8 x 50.8
x 12.7 mm (2 x 2 x 0.5 in).
Additional sets can be ordered
separately.
Specifications
Parameter
Value
Quantity
Wax Milling Stocks
100
Dimensions
50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)
Fabricus Software (Domestic Market) - 1 User
5460-00
The Fabricus Software is an entry level
CAD/CAM software used to easily
create G and M machine code files.
These files can then be loaded to the
appropriate location for compilation,
emulation and cutting using the CNC
Mill Software and CNC mill. The
Fabricus Software is required to
perform the exercises in the TechDesign® curriculum.
Additional licenses can be ordered
separately.
Manual
Description
Manual
number
Fabricus® (Quick Start Guide) _______________________________________________________________ 37863-E0
Table of Contents of the Manual(s)
Fabricus® (Quick Start Guide) (37863-E0)
•
0 Introduction
•
1 Installation
•
2 Using Fabricus Software
© Festo Didactic
7
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
•
3 Creating Parts
Features & Benefits
•
•
•
•
•
•
•
•
•
Direct interface to CNC Mill Software
Shows tool path and PRZ position
Draw, move, rotate, and size shapes using either the mouse or a dialog box for further precision
Text engraving
Draws pockets, grooves, ellipse cups, and islands
Outputs G and M code files
Program feed, speed, and depth of pass
Validation of tool paths given a tool diameter
Tool library
Specifications
Parameter
Value
Licenses
Number of Users
1, 5, 10, 15, 20 or 25
A currently available personal computer with USB 2.0 ports, running under one of the following operating
Computer Requirements
systems: Windows® 7 or Windows® 8.
CNC Mill Software - 1 User
5660-00
The CNC Mill Software is a 32-bit
software that runs under Windows®. It
features a parametric-based graphical
tool editor, a 3D tool path emulator,
and an easy-to-use graphical interface.
The software can import NC part
programs created with other CAM
programs that support the G and M
codes.
Additional licenses are available.
Manual
Manual
number
CNC Mill Software (User Guide) ______________________________________________________________ 36189-E0
Description
Table of Contents of the Manual(s)
CNC
•
•
•
•
•
Mill Software (User Guide) (36189-E0)
0 Installation of the CNC Lathe/Mill Software
1 Overview of the CNC Mill Software
2 Menus
3 The Part Program Editors
4 Tutorial Exercises
Specifications
8
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Parameter
Value
Licenses
Number of Users
1, 5, 10, 15, 20, 25, 30, or 35
A currently available personal computer with USB 2.0 ports, running under one of the following operating
Computer Requirements
systems: Windows® 7 or Windows® 8.
Optional Equipment Description
Wax Milling Stock Set (Optional)
5403-00
The Wax Milling Stock Set includes 100 wax milling stocks. Each stock has the following dimensions: 127 x 63.5
x 12.7 mm (5 x 2.5 x 0.5 in).
Specifications
Parameter
Value
Quantity
Wax Milling Stocks
100
Dimensions
127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)
Plexiglass Milling Stock Set (Optional)
5405-00
The Plexiglass Milling Stock Set includes plexiglass milling stocks that have the following dimensions:
•
•
•
15 smaller rectangular milling stocks: 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)
10 larger rectangular milling stocks: 152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in)
15 square milling stocks: 50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)
Specifications
Parameter
Value
Smaller Rectangular Milling Stocks
Quantity
15
Dimensions
127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)
Larger Rectangular Milling Stocks
Quantity
10
Dimensions
152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in)
Square Milling Stocks
Quantity
15
Dimensions
50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)
Plexiglass Milling Stock Set (Optional)
5406-00
The Plexiglass Milling Stock Set includes 100 plexiglass milling stocks. Each stock has the following
dimensions: 127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in).
Specifications
Parameter
Value
Quantity
Plexiglass Milling Stocks
100
Dimensions
127 x 63.5 x 12.7 mm (5 x 2.5 x 0.5 in)
© Festo Didactic
9
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Engraving Plate Set (Optional)
5407-00
The Engraving Plate Set includes 50 engraving plates. Each plate has the following dimensions: 203.2 x 50.8 x
3.18 mm (8 x 2 x 0.125 in).
Specifications
Parameter
Value
Quantity
Engraving Plates
50
Dimensions
203.2 x 50.8 x 3.18 mm (8 x 2 x 0.125 in)
Plexiglass Milling Stock Set (Optional)
5408-00
The Plexiglass Milling Stock Set includes 25 plexiglass milling stocks. Each stock has the following dimensions:
152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in).
Specifications
Parameter
Value
Quantity
Plexiglass Milling Stocks
25
Dimensions
152.4 x 76.2 x 12.7 mm (6 x 3 x 0.5 in)
Aluminum Milling Stock Set (Optional)
5409-00
The Aluminum Milling Stock Set
includes 50 aluminium milling stocks.
Each stock has the following
dimensions: 50.8 x 50.8 x 12.7 mm (2
x 2 x 0.5 in).
Specifications
Parameter
Value
Quantity
10
Aluminum Milling Stocks
50
Dimensions
50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
End Mill Set (Optional)
5413-00
The End Mill Set includes the
following:
•
•
•
•
One 3.175 mm (1/8 in) end mill with a shank
diameter of 9.525 mm (3/8 in), 2 flutes, square
end
One 6.35 mm (1/4 in) end mill with a shank
diameter of 9.525 mm (3/8 in), 2 flutes, square
end
One 3.175 mm (1/8 in) end mill with a shank
diameter of 9.525 mm (3/8 in), 2 flutes, 1 ball end
One end mill holder for end mills with a shank diameter of 9.53 mm (3/8 in)
Specifications
Parameter
Value
Square-End Mill (Smaller)
Quantity
1
Shank Diameter
9.525 mm (3/8 in)
Mill Diameter
3.175 (1/8 in)
End
1, square-shaped
Flutes
2
Square-End Mill (Larger)
Quantity
1
Shank Diameter
9.525 mm (3/8 in)
Mill Diameter
6.35 mm (1/4 in)
End
1, square-shaped
Flutes
2
Ball-End Mill
Quantity
1
Shank Diameter
9.525 mm (3/8 in)
Mill Diameter
3.175 (1/8 in)
End
1, ball-shaped
Flutes
2
End Mill Holder
Holds end mills with a shank diameter of 9.53 mm (3/8 in)
Intermediate Milling Set (Optional)
5414-00
The Intermediate Milling Set includes the following:
•
•
•
•
•
•
•
•
One 3.175 mm (1/8 in) end mill with a shank diameter of 9.525 mm (3/8 in), 2 flutes, square end
One 4.763 mm (3/16 in) end mill with a shank diameter of 9.525 mm (3/8 in), 2 flutes, square end
One 6.35 mm (1/4 in) end mill, with a shank diameter of 9.525 mm (3/8 in), 2 flutes, 1 square end
One 1.588 mm (1/16 in) end mill, with a shank diameter of 4.763 mm (3/16 in), 2 flutes, 2 square ends
One 3.175 mm (1/8 in) end mill, with a shank diameter of 9.525 mm (3/8 in), 2 flutes, 1 ball end
End mill holders for end mills with shank diameters of 4.76 mm (3/16 in) and 9.525 mm (3/8 in)
One hold-down set
One three-jaw Jacobs chuck
Specifications
Parameter
Value
Square-End Mill (Smaller)
© Festo Didactic
11
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Parameter
Value
Quantity
1
Shank Diameter
4.763 mm (3/16 in)
Mill Diameter
1.588 mm (1/16 in)
Flutes
2
Ends
2, square-shaped
Square-End Mills (Larger)
Quantity
3
Shank Diameter
9.525 mm (3/8 in)
Mill Diameter
3.175, 4.763, and 6.35 mm (1/8, 3/16, and 1/4 in)
Flutes
2
End
1, square-shaped
Ball-End Mill
Quantity
1
Shank Diameter
9.525 mm (3/8 in)
Mill Diameter
3.175 mm (1/8 in)
Flutes
2
End
1
End Mill Holders
Holds end mills with shank diameters of 4.76 mm (3/16 in) and 9.525 mm (3/8 in)
Hold-Down Set
Refer to Model 95331 for specifications
Drill Chuck
Type
Three-jaw Jacobs chuck
Accessories
No. 1 Morse arbor and a drawbolt to hold it in place
Engraver Tool Set (Project Lead the Way) (Optional)
5419-00
The Engraver Tool Set (Project Lead the Way) includes the following:
•
•
•
•
A collet for end mills with a shank diameter of 4.763 mm (3/16 in)
A No. 1 Morse taper
One 1.588 mm (1/16 in) end mill with a shank diameter of 4.763 mm (3/16 in), 2 flutes, 2 square ends
One 0.794 mm (1/32 in) end mill with a shank diameter of 4.763 mm (3/16 in), 2 flutes, 2 square ends
Specifications
Parameter
Value
Collet
For end mills with a shank diameter of 4.763 mm (3/16 in)
Taper
No. 1 Morse
End Mills
Quantity
2
Shank Diameter
4.763 mm (3/16 in)
Mill Diameter
1.588 mm (1/16 in) and 0.794 mm (1/32 in)
Ends
2, square-shaped
Flutes
2
Pneumatic Vise (Optional)
5434-00
The Pneumatic Vise consists of a
cylinder-operated, heavy-duty vise
used to achieve automatic clamping
and unclamping of the stock loaded in
the CNC Mill. The Pneumatic Vise is
supplied with a pneumatic control box
that connects to the solenoid driver
port of the CNC Mill, permitting M-code control of the extension and retraction of the vise cylinder with the CNC
Mill Software, Model 5660.
12
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
The Pneumatic Vise requires compressed air for operation.
Specifications
Parameter
Value
Vise Jaws
Operation
Pneumatic
Width
63 mm (2.48 in)
Depth
9 mm (0.35 in)
Use
For 50.8 mm (2 in) square parts
Vise Cylinder
Type
Double-acting
Bore
22.2 mm (0.875 in)
Stroke
25.4 mm (1 in)
Pneumatic Control Box
Maximal Air Supply
275 kPa (40 psig)
Vise Control Input
Connects to the solenoid driver port of the CNC Mill
Pneumatic Output Ports
2, the air flow through each port can be metered manually
Plexiglass Milling Stock Set (Optional)
5441-00
The Plexiglass Milling Stock Set
includes 100 plexiglass milling stocks.
Each stock has the following
dimensions: 50.8 mm (2 in) x 50.8 mm
(2 in) x 12.7 mm (0.5 in).
Specifications
Parameter
Value
Quantity
Plexiglass Milling Stocks
100
Dimensions
50.8 x 50.8 x 12.7 mm (2 x 2 x 0.5 in)
© Festo Didactic
13
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Personal Computer (Optional)
8990-00
The Personal Computer consists of a
desktop computer running under
Windows® 7. A monitor, keyboard,
and mouse are included.
Specifications
Parameter
Value
Power Requirements
Current
2A
Service Installation
Standard single-phase ac outlet
Mill Tool Set (Optional)
32933-00
The Mill Tool Set contains three end mills of various types, a mill holder, and an edge finder.
Specifications
Parameter
Value
End Mills with Two Flutes
Types:
Square nose, 2 ends, shank diameter of 4.763 mm (3/16 in), mill diameter of 1.588 mm (1/16 in)
Square nose, 1 end, shank diameter of 9.525 mm (3/8 in), mill diameter of 6.35 mm (1/4 in)
Square nose, 1 end, shank diameter of 9.525 mm (3/8 in), mill diameter of 3.175 mm (1/8 in)
End Mill Holders
For 4.763 mm (3/16 in), 6.35 mm (1/4 in), and 9.525 mm (3/8 in) shank diameter end mills
Edge Finder
Single 9.525 mm (3/8 in) shank, 5.08 mm diameter (0.2 in) head
Hold-Down Set (Optional)
95331-00
The Hold-Down Set contains two strap clamps with bolts, T-nuts, washers, and various lengths of socket head
cap screws.
Specifications
Parameter
Value
Accessories
Includes:
Two strap clamps with bolts
T-nuts
Washers
Various lengths of socket head cap screws
14
© Festo Didactic
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Mill Vise (Optional)
97062-00
The Mill Vise is ideal for operation with the CNC Mill. Its jaws are 50.8 mm (2 in) wide by 25.4 mm (1 in) deep
and open a full 50.8 mm (2 in). The fixed jaw has both a horizontal and vertical "V" groove to better hold round
bar stock. The vise includes two clamps for attachment to the CNC Mill.
Specifications
Parameter
Value
Jaw Width
50.8 mm (2 in)
Opening Between Jaws
50.8 mm (2 in)
Accessories
Two clamps with screws and T-nuts to attach to the mill table
© Festo Didactic
15
CNC Mill Training System (Light Duty), LabVolt Series, 5400-20
Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production,
installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification.
Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible
for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered
trademarks of their respective holders. © Festo Didactic Inc. 2017. All rights reserved.
Festo Didactic SE
Rechbergstrasse 3
73770 Denkendorf
Germany
P. +49(0)711/3467-0
F. +49(0)711/347-54-88500
Festo Didactic Inc.
607 Industrial Way West
Eatontown, NJ 07724
United States
P. +1-732-938-2000
F. +1-732-774-8573
Festo Didactic Ltée/Ltd
675 rue du Carbone
Québec QC G2N 2K7
Canada
P. +1-418-849-1000
F. +1-418-849-1666
www.labvolt.com
www.festo-didactic.com
16
© Festo Didactic