International Journal of Research in Business and Technology
Volume __ No.__ Month Year
TechMind Research Word Template
Author1, Author2, Author3
1
author's affiliation, lines of address & Email
author's affiliation, lines of address & Email
3
author's affiliation, lines of address & Email
2
Abstract-In this paper, we describe the formatting guidelines for TMR Journal Submission. The authors must follow the
instructions given in the document for the papers to be published. You can use this document as both an instruction set and
as a template into which you can type your own text. The entire paper must be in A4 size with dimension (9" X 11").
General Terms- Your general terms must be any term which can be used for general classification of the submitted
material such as Pattern Recognition, Security, Algorithms et. al.
Keywords- Keywords are your own designated keywords which can be used for easy location of the manuscript using any
search engines. Each keyword are separated by semicolon (;)
We ask that authors follow some simple guidelines. In
essence, we ask you to make your paper look exactly like
this document. The easiest way to do this is simply to
download the template and replace the content with your
own material.
Times Roman in which these guidelines have been set. The
goal is to have a 10-point text, as you see here. Please use
sans-serif or non-proportional fonts only for special
purposes, such as distinguishing source code text. If Times
Roman is not available, try the font named Computer
Modern Roman. On a Macintosh, use the font named
Times. Right margins should be justified, not ragged.
2. PAGE LAYOUT
3.3 Title and Authors
1. INTRODUCTION
All material on each page should fit within a rectangle of
size (9" x 11").
2.1 Margins: Margins are set according as below.
 Top: 0.85"
 Bottom: 0.85"
 Left: 0.85"
 Right: 0.85"
 Gutter: 0.30".
 Gutter position: left
Your paper must be in two column format with a space of
0.4" between columns, and width of each column is 3.3".
3. TYPESET TEXT
3.1 Normal or Body Text
Please use a 10-point Times Roman font, or other Roman
font with serifs, as close as possible in appearance to
Times Roman in which these guidelines have been set. The
goal is to have a 10-point text, as you see here. Please use
sans-serif or non-proportional fonts only for special
purposes, such as distinguishing source code text. If Times
Roman is not available, try the font named Computer
Modern Roman. On a Macintosh, use the font named
Times. Right margins should be justified, not ragged.
3.2 This paragraph is a repeat of 3.1
The title (Times Roman font 20-point) and 20-points of
white space between the Title and Authors' names (Times
Roman font 14-point) and affiliations (Times Roman font
12-point) and 20-points of white space below the
affiliation, before the abstract. 20 point white space after
keywords. All of these elements run across the full width
of the page – one column wide. See the top of this page for
three addresses.
3.4 Subsequent Pages
For pages other than the first page, start at the top of the
page, and continue in double-column format. The two
columns on the last page should be as close to equal length
as possible.
Table 1. Table captions should be placed above the
table
Graphics
Top
In-between
Bottom
Tables
End
Last
First
Figures
Good
Similar
Very well
3.5 Page Numbering, Headers and Footers
Do not include headers, footers or page numbers in your
submission. The page number will be assigned when the
publications are assembled.
4. FIGURES/CAPTIONS
Please use a 10-point Times Roman font, or other Roman
font with serifs, as close as possible in appearance to
©TechMind Research Society
1|Page
International Journal of Research in Business and Technology
Volume __ No.__ Month Year
Place Tables/Figures/Images in text as close to the
reference as possible (see Figure 1). It may extend across
both columns to a maximum width of 7” (i.e. 3.3" width of
first column+0.4" space between two columns +3.3" width
of second column).
Captions should be Times New Roman 10-point bold.
They should be numbered (e.g., “Table 1” or “Figure 2”),
please note that the word for Table and Figure are spelled
out. Figure’s captions should be centered beneath the
image or picture and Table captions should be centered
above the table body
.
Fig 1: If necessary, the images can be extended both columns
5. SECTIONS
The heading of a section should be in Times New Roman
12-point bold in all-capitals flush left with additional 6points of white space above the section head. Sections
and subsequent sub-sections should be numbered and
flush left. For a section head and a sub-section head
together (such as Section 2 and sub-section 2.1), use no
additional space above the sub-section head.
5.2. Sub-sections
The heading of sub-sections should be in Times New
Roman 11-point bold with only the initial letters
capitalized. (Note: For sub-sections and sub-sub-sections,
a word like the ora is not capitalized unless it is the first
word of the header.)
5.3. Sub-sub-sections
The heading for sub-sub-sections should be in Times New
Roman 11-point italic with initial letters capitalized and
4-points of white space above the sub-sub-section head.
5.3.1. Sub-sub-sections
The heading for sub-sub-sections should be in Times New
Roman 10-point italic bold with initial letters capitalized.
[3] Fröhlich, B. and Plate, J. 2000. The cubic mouse: a
new device for three-dimensional input. In
Proceedings of the SIGCHI Conference on Human
Factors in Computing Systems
[4] Tavel, P. 2007 Modeling and Simulation Design. AK
Peters Ltd.
[5] Sannella, M. J. 1994 Constraint Satisfaction and
Debugging for Interactive User Interfaces. Doctoral
Thesis. UMI Order Number: UMI Order No.
GAX95-09398., University of Washington.
[6] Forman, G. 2003. An extensive empirical study of
feature selection metrics for text classification. J.
Mach. Learn. Res. 3 (Mar. 2003), 1289-1305.
[7] Sannella, M. J. 1994 Constraint Satisfaction and
Debugging for Interactive User Interfaces. Doctoral
Thesis. UMI Order Number: UMI Order No.
GAX95-09398., University of Washington.
[8] Forman, G. 2003. An extensive empirical study of
feature selection metrics for text classification. J.
Mach. Learn. Res. 3 (Mar. 2003), 1289-1305.
REFERENCES
Organization of Research Paper
[1] Bowman, M., Debray, S. K., and Peterson, L. L.
There is an essential organizational pattern which makes
the writing as well as reading of research paper easy.
There are some basic parts although there may be
modifications according to content. The basic principle to
consider in writing a research paper is that you should
1993. Reasoning about naming systems. .
[2] Ding, W. and Marchionini, G. 1997 A Study on
Video Browsing Strategies. Technical Report.
University of Maryland at College Park.
©TechMind Research Society
2|Page
International Journal of Research in Business and Technology
Volume __ No.__ Month Year
first consider and familiarize yourself with the "works" of
others and then try to compare them with your ideas.
The research paper flows from the general to the specific
and back to the general in its organization. The
introduction uses a general-to-specific movement. The
methods and results sections are more detailed and
specific, providing support for the generalizations made in
the introduction. The discussion section moves toward an
increasingly more general discussion of the subject
leading to the conclusions and recommendations, which
then generalize the conversation again.
1. Title
This is the most important part because this will contain
the subject or the topic that you want to research. The
topic must agree with the current research to prove
something that you want to prove in your research.
2. Abstract
The abstract is a short (about 100-500 word) summary of
the entire paper. It should include goals, objectives,
results and conclusions. It is usually one of the last parts
of the paper to be written.
3. Introduction
Introduce to your reader the "problem" by providing a
brief background of your research. Include the basic
reasons how and why you came-up with the problem, and
the probable solutions that you can offer. In general, the
introduction summarizes the purpose of the research
paper.
This section is where you will be presenting the actual
results of the analysis that you have made based on your
chosen methodology.
8. Discussion
This is where you will be discussing more of the results of
your research, its implications on other fields as well as
the possible improvements that can be made in order to
further develop the concerns of your research. This is also
the section where you need to present the importance of
your study and how it will be able to contribute to the
field.
9. Conclusion
Provide the conclusion to your research paper. While it is
important to restate your general thesis in this section, it is
also important to include a brief restatement of the other
parts of the research paper such as the methodology, data
analysis and results.
10. Reference
This section is where you list down all the academic
materials, you have used as sources of information in your
research paper. Typical reference formats/styles include
but are not limited to APA, MLA and Chicago.
Author’s Biography with Photo
Author’s Photo
Ist Author’s Biography
Author’s Photo
2nd Author’s Biography
4. Review of Literature
This section is where you will be providing all the
relevant readings from previous works. Provide brief
summaries or descriptions of the works of other authors.
Make sure that your research materials are from credible
sources such as academic books and peer-reviewed
journals. Also, make sure that your reading materials are
directly relevant to the topic of your research paper. The
literature review typically includes the names of the
authors, the titles of their works and the year of the
publication of these works.
Author’s Photo
3rd Author’s Biography
5. Methodology
Typical methodologies include laboratory experiments,
statistical or mathematical calculations/computations and
comparison of existing literature.
6. Data Analysis
Depending on the type of your research paper, data
analysis instruments and operations limited to SWOT
Analysis (Strengths, Weakness, Opportunities and
Threats) which is a form of a qualitative data analysis.
7. Results
©TechMind Research Society
3|Page