Creo Schematics Installation
How to install and configure for KNA
Run setup.exe
 Run setup.exe in subfolder in this location:
• \\akus2406\eng\ENGINEERINGAPPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS - RSDESIGNER
Install Creo Schematics
Post install steps
 Set the install folder permissions to allow configuration files to be copied.
1.
Navigate to C:\Program Files (x86)
2.
Right click on the PTC folder and select Properties
3.
On the Security tab all Full Control for Users
Configuration
 Run “akus2406\eng\ENGINEERINGAPPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS –
RSDESIGNER\KNA Configure Creo Schematics.bat – Shortcut”
 Installation and Configuration is complete!
 Now the Windchill Workgroup Manager (WGM) should be installed
ADMIN INFO
 set Config="V:\ENGINEERINGAPPLICATIONS\ENGL_ENG_Standards\Pro_Stds_WF\configs\CreoSchematics"
 set Install="C:\Program Files (x86)\PTC\Creo 2.0\Schematics\bin"
 set SchemAppData="%Appdata%\Roaming\PTC\Creo\Schematics
 INSTALLER: V:\ENGINEERINGAPPLICATIONS\Englewood_ENG_Software\PTC\CREO SCHEMATICS –
RSDESIGNER
 Configure license selection of FULL vs. LITE
• Copy PSF files
• From V:\ENGINEERING-APPLICATIONS\Englewood_ENG_Software\PTC\CREO
SCHEMATICS - RSDESIGNER\KNA Configuration
• to C:\Program Files (x86)\PTC\Creo 2.0\Schematics\bin
 Customization
• When Creo Schematics starts, customization settings are automatically applied from
<drive>:\Users\<username>\AppData\Roaming\PTC\Creo\Schematics or the
 Creo Schematics Central Catalog
 The full version Creo Schematics can link designs to a central catalog that
provides a centralized location and a single source for company libraries. (Creo
Schematics Lite cannot do this.) Place the catalog on a server with read-only
access to prevent unauthorized modification. Assigned privileges protect the
central catalog:
 • Administrator—Controls and maintains the central catalog.
 • Editor—Enables the editing of the central catalog.
 • User—Creates designs using the central catalog. With user privileges, you
cannot edit the central catalog. You can submit new catalog items to the
administrator for approval and integration into the company catalog.
 A base design using company templates, properties, and general design
settings must be accessible for all users. If the base design is password-