EZH2O® Bottle Filling Station
with Bi-Level EZ Cooler
Models EZSTL8WS & EZSTLDDWS
SPECIFICATIONS
RATED FOR INDOOR USE ONLY
PRODUCT SPECIFICATION
Models EZSTL8WSLK
or EZSTLDDWSLK
Unit shall include electric water cooler with bottle filling station. EZSTL8WS
shall deliver 8 GPH of 50°F drinking water at 90°F ambient and 80°F
inlet water. EZSTLDDWS shall deliver non-chilled drinking water. Lower
units shall have pushbar activation. Bottle filling unit shall include an
electronic sensor for touchless activation with auto 20-second shut-off
timer. Shall include Green Ticker™ displaying count of plastic bottles
saved from waste. Bottle filler shall provide 1.1-1.5 gpm flow rate with
laminar flow to minimize splashing. Shall include integrated silver ion
anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit
shall be lead-free design which is certified to NSF/ANSI 61 and 372 and
meets Federal and State low-lead requirements. Unit shall be certified to
UL399 and CAN/CSA 22.2 No. 120.
STANDARD FEATURES
•
•
•
•
•
•
•
Sanitary, touchless activation with auto 20-second shut-off (Bottle Filler)
Easy-touch front and side pushbar controls (Cooler)
Integrated Silver Ion Anti-microbial Protection in key areas
Quick Fill Rate: 1.1 gpm (EZSTL8WS); 1.5 gpm (EZSTLDDWS)
Laminar Flow provides minimal splash
Real Drain System eliminates standing water
Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• Available with Flexi-Guard® StreamSaver™ or Vandal-resistantt bubbler
(tincludes “VR” code in model no.)
• Cooler panel finishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel
COOLING SYSTEM (Models EZSTL8WS & EZSTL8WSVR only)
• Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
• Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is
permanently lubricated.
• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam
which meets UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately
calibrated capillary tube.
• Temperature Control: Easily accessible enclosed adjustable thermostat
is factory preset. Requires no adjustment other than for altitude requirements.
Models
EZSTL8WSVRSK or
EZSTLDDWSVRSK
CONSTRUCTION
• Stainless Steel basin with integral drain
• Galvanized structural steel cooler chassis provides
structural integrity
• Stainless steel bottle filler wrapper with ABS plastic alcove
• Cooler cabinet available as Light Gray Granite Vinyl Clad
Steel or Stainless Steel (additional cost) construction
• Flexi-Guard® StreamSaver™ Safety Bubbler (option)
utilizes an infused anti-microbial pliable polyester
elastomer to prevent accidental mouth injuries. Flexes
on impact. Lower-flow water efficient water stream.
• Vandal-resistant bubbler (option) is one-piece heavy-duty
chrome-plated
Warranty: 5 year limited warranty on the unit’s
refrigeration system. Electrical components and water
system are warranted for 12 months from date of installation
or 18 months from factory shipment, whichever date falls
first.
CERTIFICATIONS / STANDARDS
CAPACITIES CHART
Model
Voltage /
Hertz
Chilling**
F.L. Rated
Capacity Amps Watts
EZSTL8WS(VR)*K
115V / 60Hz
8 GPH
5.0
370
EZSTL8WS(VR)*2K
220V / 50Hz
6.7 GPH
2.5
370
EZSTL8WS(VR)*3K
220V / 60Hz
8 GPH
2.5
370
EZSTLDDWS(VR)*K
115V / 60Hz
-
1.0
15
EZSTLDDWS(VR)*2K
220V / 50Hz
-
0.5
15
EZSTLDDWS(VR)*3K
220V / 60Hz
-
0.5
15
Approx.
Ship
Wt.
ADA Compliant
UL399 and CAN/CSA 22.2 No. 120 Certified
(Only 115V models are certified)
ANSI/NSF 61 and 372 Certified
GreenSpec® Listed
101
91
*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specification without notice. Please visit elkaypro.com
for the most current version.
•
•
•
•
This specification describes an Elkay product with design,
quality and functional benefits to the user. When making a
comparison of other producer’s offerings, be certain these
features are not overlooked.
2222 Camden Court
OakBrook, IL 60523
630-572-3192
elkaypro.com
© 2014 Elkay
SPEC14-72 (03/2014)
EZH2O® Bottle Filling Station
with Bi-Level EZ Cooler
Models EZSTL8WS & EZSTLDDWS
ROUGH-IN
RATED FOR INDOOR USE ONLY
IMPORTANT! INSTALLER PLEASE NOTE:
These units are designed and built to provide water to the user which has not
been altered by materials in the cooler waterway. The grounding of electrical
equipment such as telephone, computers, etc. to water lines is a common
procedure. This grounding may be in the building but may also occur away from
the building. This grounding can cause electrical feedback into a water cooler
creating an electrolysis which results in a metallic taste or an increase in the
metal content of the water. This condition is avoidable by installing the cooler
using the proper materials as shown.
NOTICE
This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non- metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.
Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.
Model shown with Flexi-Guard StreamSaver Bubbler.
17 7/8"
454mm
7/16" X 3/4" OBROUND
(11mm X 19mm) HOLES (6)
7"
178mm
3 9/16"
90mm
7"
178mm
18 3/8"
467mm
6 3/8"
162mm
15"
381mm
C
L
6 3/8"
162mm
18 7/8"
479mm
19"
483mm
9/32" O HOLES
(7mm) (12)
HANGER BRACKET
6 7/16"
164mm
2 7/8"
73mm
6 3/8"
162mm
2"
51mm
2"
51mm
E
57 1/16"
1450mm
7/8"
22mm
2"
51mm
A
(ALT. LOCATION)
B
C
L
A
(PREFERRED
LOCATION)
F
34 5/16"
872mm
24 1/2"
622mm
22 15/16"
583mm
21 7/8"
556mm
D
(PREFERRED
LOCATION)
19 7/16"
494mm
E
28 13/16"
732mm
D
(ALT. LOCATION)
2"
51mm
F
13 15/16"
354mm
32 7/8"
835mm
ORIFICE
HEIGHT
27"
686mm
ADA
REQUIREMENT
5 3/4"
146mm
7"
178mm
8 1/16"
205mm
31 5/16"
796mm
RIM
HEIGHT
19"
483mm
17 7/16"
443mm
38 3/8"
975mm
ORIFICE
HEIGHT
36 13/16"
936mm
RIM
HEIGHT
7"
178mm
C
1 7/16"
37mm
12 1/2"
318mm
3"
77mm
FINISHED FLOOR
REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Drain stub 2” (51mm) out from wall.
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).
Job Name: ____________________________________
Model: _______________________ Qty. ____________
Contact: ______________________________________
Approval Signature: _____________________________
Notes:
2222 Camden Court
Oak Brook, IL 60523
elkaypro.com
Printed in U.S.A.
© 2014 Elkay