Displacement Elasticity
Strain Poisson
Strain Gauge Measurements
Quasi – Static Tests
Mechanical, Materials-Metallurgy, Mining,
TESTBOX1001
Soil and Geological Engineering Laboratory Tests
General Purpose Quasi-Static Data Acquisition Device
Finished Product and Materials Testing
TESTBOX1001 Data Acquisition System, which has a resolution of 16 bit, is designed
for low noise high measurement performance and could collect data up to 8 per
samples in second per channel, is characterized as an ideal and practical solution for
many researchers.
The basic function of TESTBOX1001 is to convert the slowly changing (static/quasi
static) signals received from the sensors into digital data and then to transfer this
data to computer media. Thanks to the integrated analog signal conditioning unit,
measurement could be taken without any need for any additional part with numerous
sensor types listed below.
Broad Sensor Compatibility
Transmission Line Tower, Structural Element, Truss Testing
Pipe-Profile Cross Section Testing
R&D and Quality Control Laboratory Tests
ACCESSORIES AND OPTIONS
TESTBOX 1001 devices are provided together with TESTBOX-Bridge (Device Gateway)
for computer connection. One TESTBOC Q cable is required for each channel where
quarter and half bridge strain gauge measurement will be done
TECHNICAL SPECIFICATIONS
TESTBOX1001
Resolution
16 bit / ±10V measurement area / 65536 steps / 0,000305V
SENSITIVITY
Number of Channels
8 channels in single device.
Extendable up to 64 channels from single USB port.
Analog Signal
Conditioning
Each channel has integrated independent signal processing
infrastructure.
• Load Cells
Data Acquisition
Speed
8 samples/ second/ channel – independent of the number of channels
• DC Type LVDTs
Low Noise
SNR>72dB (SNR, signal-to-noise ratio)
• Potentiometric Sensors
Measurement Interval From ±10mV level to ±10V level
• Strain Gauges
• Strain Gauge Based Sensors
• Pressure Transmitters
• Thermocouples
• Civil Engineering Sensors
• Voltage Output Sensors
Channel Gains
1/150/247/396/494/643/740/890 Adjustable independently for each
channel
Excitation Voltage
5V/10V selectable warning voltage/ Separately adjustable for each
channel
Connector Structure:
DSUB9
Operating
temperature
-20°C ~ +50°C
Box and Dimensions
Metal box (288x103x160mm)
General Purpose Quasi-Static Data Acquisition Device
Civil Engineering – Structural and Earthquake Engineering
TESTBOX1001
FIELDS OF APPLICATION
EASYTEST-BASIC
EASYTEST BASIC STATIC DATA ACQUISITION SOFTWARE
EASYTEST-BASIC is a general purpose data acquisition software prepared based on the experience of the R&D
Department obtained in the university laboratories over years.
In the tests which could be defined as static and quasi-static, it enables performing basic functions such as data
acquisition, data recording, real-time data display, graphical representation etc. through a simple and fluent
interface. Before the test, it receives many calculation burdens from the users with the special calibration
capability specific to the type of sensor.
• Adjustable data record speed
• Ms-Excel(*.csv) Data Storage Format
• Data safety against computer errors
• Flexible indicators including channel name,
unit and value.
• dx/dt- data changing rate on a real time
basis
• Real time mathematical transactions
between channels
• Advanced sensor calibration possibilities
• Multiple point calibration
• Ax+B linearization
• Direct calibration from sensor certificate
information
• Direct calibration feature using Calibration
certificate for Load Cells/Strain Gauges
• Automatic gain calculation for sensors at mV
level.
• Test panel – Raw data Calibrated data real
time display
• Dynamic adjustable time axis for time based
graphics
• Calibration Data Base transfer between
computers (Import/Export)
• Multiple channel offset correction
• Ability to receive data through joint memory
sharing from a software operating on the
same computer (virtual channel)
16 Bit
Resolution, High
Measurement
Performance
Extendable
Number of
Channels
Direct Sensor
Connection –
Plug and Play!
Connection up
to 64 channels
from single USB
port.
Civil Engineering
– Structural and
Earthquake
Engineering
Mecahnical,
Materials
Metallurgy, Mine,
Soil Mechanics and
Geology Engineering
Laboratory Tests
• Real time graphic export during test (*.bmp)
Broad Sensor
Compatibility
1328. Sokak 5/6 Aşağı Öveçler 06460 Çankaya / Ankara / TURKEY
Tel: +90 312 473 97 91-92 - Fax: +90 312 473 97 93
[email protected] - www.teknikdestek.com.tr
R&D and
Quality Control
Laboratory Tests
www.teknikdestek.com.tr