Fiber Solution
Solution
Fiber
Cable Management Systems- Inside Plant
FIBER OPTIC TERMINATION BOX (Break-out box)
Smaller size fiber optic box, the terminal box, is also used for fiber optic distribution and organization. Our typical fiber terminal box are with 4, 8 and 16 ports. A smaller FTTH termination
box is also available for indoor premise termination and distribution. The fiber optic box are made of cold rolling steel and the surface of the box use the technique of dim blowing plastic.
This type fiber optic box is available with variety of adaptor cutouts. This fiber terminal box could be installed on the wall or put in horizontal line.
The outdoor wall/pole mount FTTX boxes are environmentally sealed enclosures for splitting and redistributing optical power from feeder fibers to distribution fibers for FTTX networks.
They are also designed for fiber splicing, termination, and management. Each box has universal adapter plug-ins and splitter mounts.
Additional splice trays can be stacked on top to increase capacity. Each splice tray can install up to 24 single fiber splice protection sleeves (with diameter of 2.3mm) or 6 ribbon splice
protection sleeves. Splice trays can be opened individually and removed from the box. Excess length of cables/pigtails is stored in reels on the front panel.
Features
•
•
•
•
•
•
•
Small box for desk, wall, or under floor mounting of fibre terminations
Available for ST (4, 8, and 16 way), SC duplex (2 and 8 way), and SC simplex (8 way). Indoor FTTH box is available in 2 and 4 cores
Can be supplied fully loaded with adaptors, partially loaded, or unloaded
19mm knock out gland holes on 3 blank sides for cable entry
1.2mm zintec finished light grey RAL 7035 – in metal boxes
Includes cable gland for 4-10mm cable – in metal boxes
Lid retained by one screw – in metal boxes Very cost effective for networks where less fiber core cable is used
Aplication
•
•
•
•
•
•
FTTX deployments
For inside the buildings
inside a PLC control panels where severe space constrain is there.
Cross-connects
CCTV outdoor applications where a separate box is used to place the equipment.
Field installation of connectors n Splicing of pigtails
14F11M4 Metric view
14F11M8 Metric view
14F11M16 Metric view
Ordering
Part no
Details
Capacity - cores
14F11M4-X
Break-out Metal box 4 Port
LC - 8 cores, FC,ST.SC, E-2000 etc- 4 cores
110X110X40
14F11M8-X
Break-out Metal box 8 Port
LC - 16 cores, FC,ST.SC, E-2000 etc- 8 cores
160X160X40
14F11M16-X
Break-out Metal box 16 Port
LC - 32 cores, FC,ST.SC, E-2000 etc- 16 cores
160X160X80
Ordering Legend
X
1
2
3
Type of adaptor cutout
ST,FC
SC Simplex, E-2000, MTRJ, LC duplex
SC duplex
C-36
Dimensions (mm) (LxWxH)