WLS LIGHTING SYSTEMS
HEL
SPECIFICATIONS
DECORATIVE LED
SERIES
SMARTTEC™ THERMAL CONTROL - WLS driver features integral sensor which reduces drive
current when ambient temperatures exceed rated temperature.
EXPECTED LIFE - Minimum 60,000 hours to 100,000 hours depending upon the ambient
temperature of the installation location.
LEDS - Select high-brightness LEDs in Cool White (5000K) or Neutral White (4000K) color
temperature, 70 CRI.
DISTRIBUTION - Types 3, FP, and 5. Exceptional uniformity creates bright environments at
lower light levels. Improved backlight cutoff minimizes light trespass.
HOUSING - Modular fixture is available in two mounting styles - Post Top and Side Mount. One
piece housing/support frame is die-cast aluminum. Combination mounting arm/driver
enclosure on side mount versions is die-cast with integral ribs for heat dissipation. Access cover
and support arms for post top versions are die-cast aluminum.
DIMENSIONS
HOUSING TOP CAP - Removable spun aluminum cap/post top driver enclosure is retained by
captive stainless steel fasteners and safety cables. Housing and top cap interface is sealed with
one-piece extruded silicone gasket. Tool-less entry option is available.
Ø25-1/4”
(648mm)
Ø25-1/2”
(648mm)
7”
(177mm)
REFLECTORS/DISTRIBUTION PATTERNS
35-1/2”
(902mm)
19-3/8” 31-3/16”
(492mm) (792mm)
SEALED OPTICAL UNIT - Lens is clear, flat tempered glass, sealed to aluminum optics
3-1/3”
(84mm)
Ø4”
(102mm)
Ø5” (127mm)
Post Top
Slipfits 4” Dia. Tenon or Pole
housing. Pressure stabilizing breather allows super-tight protection while preventing
temperature cycling form building up internal pressure and vacuum that can stress optical unit
seals and components.
24-5/8”
(625mm)
Post Top with WM Accessory
13-7/16”
(341mm)
FASTENERS - All exposed fasteners are black oxide coated stainless steel. Internal fasteners
Ø25-1/2”
(648mm)
are stainless steel or zinc electro-plated steel.
R2”
(52mm)
ELECTRICAL - A terminal block for attachments of incoming primary wiring is supplied. Twostage surge protection (including separate surge protection built into electronic driver) meets
IEEE C62.41.2-2002, Scenario 1, Location Category C. Available with universal voltage power
supply 120-277VAC (50/60Hz input), 347VAC and 480VAC. Optional button-type photocells
(PCI) are also available in 120, 208, 240, 277 or 347 volt (supply voltage must be specified).
25”
(634mm)
37-3/4” (958mm)
7” (177mm)
8-1/8”
(206mm)
4-1/4” (107mm)
Side Arm Pole Mount
Ø25-1/4”
DRIVER - Available in Super Saver (SS) and High Output (HO) drive currents (Drive currents are
factory programmed). Stat-of-the-art driver technology designed specifically for WLS LED light
sources provides unsurpassed system efficiency. Components are fully encased in potting
material for moisture resistance. Driver complies with IED and FCC standards.
(648mm)
35-1/2”
(902mm)
Ø4”
(102mm)
3-1/3”
(84mm)
24-1/2”
(622mm)
OPERATING TEMPERATURE - -40°C to +50°C (-40°F to +122°F).
Ø4” (102mm)
or Ø5” (127mm)
FINISH - Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process.
Post Top with BK MPT BO (x2)
Mounts to 4” or 5” Dia. D180 Bolt-on Pole
The DuraGrip finish withstands extreme weather changes without cracking or peeling.
This product, or selected versions of this product, meet the standards listed below.
Please consult factory for your specific requirements.
WARRANTY - WLS LED fixtures carry a limited 5-year warranty.
American Innovation
American Made
IP65
Approved By:
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 8/16
HEL SERIES
DECORATIVE LED
ORDERING INFORMATION
MOUNTING
SERIES
STYLE
HEL
PT - Post Top
SA4 - Side Arm
Mount for
4” Poles 1
SA5 - Side Arm
Mount for
5” Poles 1
HEL
PT
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LIGHT
DRIVE
DISTRIBUTION SOURCE CURRENT
2 - Type II
3 - Type III
5 - Type V
FP - Forward
Throw
5
LED
INPUT
LUMINAIRE
VOLTAGE
FINISH
CW - Cool White UE - Universal BRZ - Bronze
(5000°K nom.)
Electronic BLK - Black
NW - Neutral
(120-277 V PLP - Platinum Plus
White
50/60Hz) WHT - White
SVG - Satin Verde
(4000°K nom.)
Green
347
GPT - Graphite
CC - Custom Color
480
SS - Super
Saver
HO - High
Output
LED
COLOR
TEMPERATURE
HO
CW
UE
OPTIONS
ACCESSORIES
PC - Photocell
TE - Tool-less Entry
DIM - 0-10V Dimming
(from external signal) 2
BLS - Bi-level Switching
(from external
120-277V signal) 2
NO - No Options
SPA - Square Pole Adapter
(SA only)
WM - Wall Mount (PT only)
SAWM - Side Arm Wall
Mount (SA4 or SA5)
BK MPT BO - Medium Bolt
On Bracket (for PT 180) 1, 3
NA - Accessories
BRZ
NO
NA
(EXAMPLE ORDER)
ORDER:
WLS-HEL
FOOTNOTES:
1 - For correct mounting, order pole with 3” reduced drilling pattern
2 - DIM and BLS cannot be ordered together.
3 - For PT mounting configurations other than D180, consult factory. Order one bracket per fixture.
LUMINAIRE EPA CHART - HEL Series
LIGHT OUTPUT - HEL
Neutral
White
Cool
White
ARM MOUNT
# of LEDS
SS 64
HO 64
SS
64
HO 64
Neutral
White
Cool
White
POST TOP MOUNT
# of LEDS
SS 64
HO 64
SS
64
HO 64
Lumens (Nominal)
Type 3
Type FT
Type 5
7110
9410
6430
9010
Type 3
6160
8660
5900
8280
5870
8150
5640
7940
Lumens (Nominal)
Type FT
Type 5
6180
8670
5930
8250
5570
8270
5350
7560
Watts
(Nominal)
70
108
70
108
Watts
(Nominal)
5240
7510
5150
6890
70
108
70
108
Project Name:
Location:
Date:
1919 Windsor Place
Fort Worth, TX 76110
800.633.8711
PT Single
PT
1.0
PT D180°
PT
2.0
Single
SA
1.0
D180°
SA
2.1
D90°
SA
1.8
T90°
SA
2.7
T120°
SA
2.8
Q90°
SA
3.5
SHIPPING WEIGHTS - HEL Series
LED Chips are frequently updated therefore values may increase.
Approved By:
MOUNTING
STYLE
Fax: 817.735.4824
Catalog Number
Est. Weight (kg/lbs.)
HEL (PT or SA)
29/64
www.wlslighting.com
01 Rev. 8/16