LSL-PF Lift System Light with Push Up Flap
ISSUE 001
SHEET 1 of 4
Technical Sheet
FUNCTION
DESIGN HIGHLIGHTS
An electric mechanism to lift a flat
screen television. Suitable for marine
use. Shown here with a simple push
up flap.
•
Quiet smooth action at approximately
40mm [1.6] per second.
•
Full cable management.
•
Wide range of mounting options.
SUITABILITY
•
24V DC motor. Suitable for direct
DC supply.
•
Marine suitable robust beam.
Suitable for a total lifting weight of
25Kg [55lbs] or 16Kg [35lbs] in a
marine environment.
SPECIFYING
OPTIONS
•
Electric Flap Actuator.
•
Box Enclosure.
•
Fixed Screen Lid.
•
Custom Screen Back Cover.
•
Heavy duty option.
•
Outdoor option.
Check screen mounting details and
request a suitable VESA mount plate
CONTROL
Supplied with basic infrared remote.
can be learnt by many learning
remotes.
Also has switch control ans RS232
so can be operated by relays,
switches, Creston/AMX or Lutron
systems.
Quick lock VESA
mount system
Cable
management
WARNING
IMPORTANT
It is the responsibility of
the installer to warn all
potential end users of
the dangers of interfering
with mechanisms during
operation
Mechanisms which lift
or move weights need
to be checked on a
yearly basis for any
damage which may
result in an accident
www.futureautomation.co.uk
tel: +44 (0) 1438 833 577
Robust lifting
beam.
Mechanism Supplied as shown.
Base supports for neater
finish in the up position
fax: +44 (0) 1438 833 565
All cabinet work shown
is to be made by others
and is not supplied with
the lift.
LSL-PF Lift System Light with Push Up Flap
ISSUE 001
SHEET 3 of 4
Technical Sheet
PLAN VIEW - LIFT UP
B
A step is required on
this edge of the flap
to prevent it dropping
down too far into the
cabinet.
B
Base timber fills
the opening when
in the UP position.
0.1
3
FLAP - VIEW ON BOTTOM FACE
0
0.6
14
1.8
45
3.0
77
4.2
107
4.5
114 *
*30mm [1.2] thick screen shown.
Increase depth of opening and
flap when using thicker screens.
3.9
100 *
The flap must have a step which
locates with a step on the front
edge of the opening. This is
required to stop the flap falling
down inside the cabinet.
SECTION B-B
SCALE 1 : 2
FLAP WIDTH
Flap and Base width are
typically screen width +20mm
[0.8].
BASE - VIEW ON TOP FACE
0
7.5
190
1.7
44 +
SCREEN
DEPTH
0
0.2
4
0.1
2
1.5
38
www.futureautomation.co.uk
tel: +44 (0) 1438 833 577
fax: +44 (0) 1438 833 565
BASE WIDTH
*Based on 30mm [1.2]
thick screen and a 3mm
[0.1] diameter hinge.
LSL-PF Lift System Light with Push Up Flap
ISSUE 001
SHEET 4 of 4
Technical Sheet
JUST MECHANISM - UP POSITION
4.5
114
3.0
77
JUST MECHANISM - DOWN POSITION
VESA 200 plate
supplied as standard
6.8
173
Adjustable height
push roller.
INTERNAL
CABINET
HEIGHT
www.futureautomation.co.uk
8.0
203
6.8
173
0
6.1
156
6.8
173
14.9
379
tel: +44 (0) 1438 833 577
fax: +44 (0) 1438 833 565