(A Govt. of India Enterprise)
AN ISO 9001 & ISO 14001 COMPANY
VOLUME - III
BILL OF QUANTITY (PRICE BID)
FOR
CONSTRUCTION OF SCHOOL OF PHYSCIAL SCIENCES AT TANHRIL, AIZAWL
FOR
MIZORAM UNIVERSITY
ENGINEERING PROJECTS (INDIA) LIMITED
(A GOVT. OF INDIA ENTERPRISE)
7, Institutional Area, Core-3, Scope Complex,
Lodhi Road, New Delhi-110003
TEL NO: 011-24361666 FAX NO. 033-22824428, 24363426
SCHOOL OF PHYSICAL SCIENCES AT AIZAWL, MIZORAM
PRICE SCHEDULE
SI. No.
DESCRIPTION
1
TO BE QUOTED BY TENDERER
ESTIMATED COST
(Rs.)
2
3
% (-) Below / (+) Above
4
In figures
1-
Amount ( -) Below / (+) Above Estimated Cost
Total Amount( Rs.)
5= (3 x 4 )
In words
In figures
3+5
In words
CIVIL WORKS
1.1 As per DSR 2007
a)
Excluding subhead steel items
37170522.69
b)
Subhead steel items
22332047.90
1.2 Non DSR Items
2-
3-
4-
12303702.00
SANITARY & PLUMBING WORKS
2.1 As per DSR 2007
2890340.85
2.2 Non DSR Items
1699032.06
ELECTRICAL WORKS
3.1 As per DSR 2007
3087759.00
3.2 Non DSR Items
8732894.00
FIRE FIGHTING & FIRE ALARM WORKS
4.1 As per DSR 2007
4.2 Non DSR Items
0.00
1091458.00
TENDER VALUE
TOTAL TENDER VALUE ( IN WORDS) : Rupees
Seal & Signature of Tenderer
CIVIL WORKS
(Page No. 1 to 20)
ABSTRACT OF COST - CIVIL WORKS
AMOUNT (Rs.)
SL. No.
DESCRIPTION
DSR Item
1
TOTAL OF SUB HEAD - 1 (EARTH WORK IN EXCAVATION)
2
TOTAL OF SUB HEAD - 2 (CONCRETE WORKS)
3
TOTAL OF SUB HEAD - 3 (R C C WORKS)
4
1673818.95
20700.00
859766.25
0.00
20190886.45
2208000.00
TOTAL OF SUB HEAD - 4 (BRICK WORKS)
192634.00
7481040.00
5
TOTAL OF SUB HEAD - 5 (WOOD WORKS)
778625.20
0.00
6
TOTAL OF SUB HEAD - 7 (FLOORING)
4415594.20
593929.00
7
TOTAL OF SUB HEAD - 8 (ROOFING)
1143768.00
0.00
8
TOTAL OF SUB HEAD - 9 (FINISHING)
2501738.85
0.00
9
TOTAL OF SUB HEAD - 10 (ALUMINIUM WORKS)
2378758.50
0.00
10
TOTAL OF SUB HEAD - 11 (MISCELLANEOUS WORKS)
1549016.20
1253105.00
11
TOTAL OF SUB HEAD - 12 (SITE DEVELOPMENT WORKS)
1485916.09
746928.00
37170522.69
12303702.00
22332047.90
0.00
59502570.59
12303702.00
SUB TOTAL
12
TOTAL OF SUB HEAD - 6 (STEEL WORKS, Reinft.steel, grills etc)
GRAND TOTAL
BOQ
Non Schedule Item
1
ABST CIVIL
SCHOOL OF PHYSICAL SCIENCES AT AIZAWL, MIZORAM
BILL OF QUANTITY : CIVIL WORKS
DSR Sl. No.
2007/NS
SUB-HEAD-1
2.6
1.1
2.6.1
2.8
1.2
2.8.1
2.26
2.26.1
2.25
1.2.1
1.3
1.3.1
1.4
2.34
1.5
2.34.1
DSR 1997
2.36
1.6
(a)
NS
1.7
Rate (Rs.)
Description of item
Unit
DSR
NS
Amount (Rs.)
DSR items
NS items
EARTHWORK IN EXCAVATION
Earthwork in excavation by mechanical means (hydraulic
excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in
width as well as 10sqm on plan) including disposal of excavated earth
lead upto 50m and lift upto 1.5m, disposed earth to be levelled and
neatly dressed :
All kinds of soil
Earth work in excavation by mechanical means (hydraulic
excavator)/manual means in foundation trenches or drains(not
exceeding 1.5m in width or 10sqm on plan) including dressing of sides
and ramming of bottoms, lift upto 1.5m, including getting out the
All Kinds of soil
Extra for additional lift of 1.5m or part thereof
All Kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth:
consolidating each deposited layer by ramming and watering, lead up to
50 m and lift upto 1.5 m
Supplying chemical emulsion in sealed containers including delivery as
specified .
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%.
Diluting and injecting chemical emulsion (to be supplied free of cost at
site of work) for PRE -CONSTRUCTIONAL ANTI -termite treatment and
creating a continuous chemical barrier under and alround the column
pits, wall trenches, basement excavation, top surface of plinth filling,
junction of wall and floor, along the external perimeter of building,
expansion joints, over the top surface of consolidated earth on which
apron is to be laid, surroundings of pipes and conduits etc.complete as
per specificatios(plinth area of the building at ground floor only shall be
measured for payment)
Chlorpyriphos Emulsifiable concentrate 20% with 1% concentration.
Supplying and filling, in plinth with locally available sand under floors
including, watering, ramming consolidating and dressing complete.
cum
9363
101.85
953621.55
cum
50
103.40
5170.00
cum
2967
18.90
56076.30
cum
7283
45.70
332833.10
litre
1130
174.30
196959.00
sqm
1695
76.20
129159.00
cum
50
414.00
1673818.95
TOTAL OF SUB-HEAD-1
BOQ
Qty
2
20700.00
20700.00
CIVIL
DSR Sl. No.
2007/NS
SUB-HEAD-2
Rate (Rs.)
Description of item
Unit
DSR
NS
Amount (Rs.)
DSR items
NS items
CONCRETE WORKS
4.1
2.1
Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work upto plinth level.
4.1.3
a)
4.1.8
b)
4.1.10
c)
1:2:4 ( 1Cement : 2 coarse sand :4 graded stone aggregate 20 mm
nominal size)
1:4:8 (1 Cement : 4 coarse sand :8 graded stone aggregate 40 mm
nominal size)
1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm
nominal size)
TOTAL OF SUB-HEAD-2
BOQ
Qty
3
cum
10
3257.45
32574.50
cum
187
2449.00
457963.00
cum
165
2237.75
369228.75
859766.25
0.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-3
5.9
3.1
5.9.1
5.9.2
a)
b)
5.9.3
5.9.4
5.9.5
5.9.6
5.9.7
5.9.14
c)
d)
e)
f)
g)
i)
5.9.15
i.a)
j)
5.11
3.2
5.11.1
3.2.1
5.30
3.3
5.33
3.4
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
R.C.C WORKS
Centring and shuttering including strutting, propping etc. and removal of
form for:
Foundations, footings, bases of columns etc. for mass concrete.
Walls(any thickness) including attached pilasters, buttresses, plinth and
string courses.
Suspended floors, roofs,landings, balconies and access platform.
Shelves (Cast in situ)
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Columns, Pillars, Piers, Abutments, Posts and Struts
Stairs, (excluding landings) except spiral-staircases.
Extra for shuttering in circular work (20% of respective centring and
shuttering item )
For Columns
Small lintels not exceeding 1.5m clear span, moulding as in cornices,
window sills,string courses, bands, copings, bed plates, anchor blocks
and the like
Extra for additional height in centering, shuttering where ever required
with adequate bracing, propping etc. including cost of de-shuttering and
decentering at all levels over a height of 3.5m, for every additional height
of 1 metre or part thereof (Plan area to be measured)
sqm
1568
119.25
186984.00
sqm
sqm
sqm
sqm
sqm
sqm
4005
5440
30
7240
3535
282
180.40
187.35
187.35
162.65
238.40
204.00
20%
722502.00
1019184.00
5620.50
1177586.00
842744.00
57528.00
sqm
165
47.68
7867.20
sqm
240
119.25
28620.00
3165
106.20
336123.00
520
11.95
6214.00
3800
4147.40
15760120.00
Suspended floors, roofs,landing,beams and balconies (Plan area to be
measured)
sqm
Add or deduct for plaster drip course/groove in plastered surface or
moulding to R.C.C. projections.
metre
Providing and laying in position machine batched, machine mixed and
machine vibrated design mix cement concrete of specified grade for
reinforced cement concrete work including pumping of concrete to site of
laying but excluding the cost of centring, shuttering, finishing and
reinforcement. including Admixtures in recommended proportions. as
per IS 9103 to accelerate, retard setting of concrete improve workability
without impairing strength and durability as per direction of Engineer-inCharge - M-25 grade reinforced cement concrete by using 410kg.of
cement per cumof concrete.All works upto floor V level.
cum
4
CIVIL
DSR Sl. No.
2007/NS
NS
3.5
NS
3.5.1
3.5.2
3.6
5.29
3.6.1
3.6.2
3.7
5.29.2
5.59.2.1
22.4
3.8
22.4.1
BOQ
Rate (Rs.)
Description of item
Unit
Providing and filling in position thick polyurethane sealant in expansion
joints.
70 x 17 mm
15 x 6 mm
Providing and fixing Polyethylene joint filler board in expansion joints as
shown in drawing.
70 mm thick
15 mm thick
Providing and fixing sheet covering over expansion joints with iron
screws as per design to match the colour/shade of wall treatment :
Aluminium fluted strips 3.15mm thick
150mm wide
Providing and Placing in position suitable PVC water stops conforming
to IS : 12200 for construction/expansion joints between two RCC
members and fixed to the reinforcement with binding wire before pouring
concrete etc. complete.
Serrated with central bulb (225 mm wide, 8-11 mm thick)
TOTAL OF SUB HEAD-3
5
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
metre
metre
725
25
2785.00
250.00
2019125.00
6250.00
sqm
sqm
195
10
925.00
225.00
180375.00
2250.00
metre
25
276.80
6920.00
metre
85
386.75
32873.75
20190886.45
2208000.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-4
NS
4.1
NS
4.2
NS
4.3
NS
4.4
6.15
4.5
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
BRICK WORK
First class brick work in foundations and plinth in cement mortar 1:6 (1
cement : 6 coarse sand)
Extra for brick work in superstructure above plinth level up to floor V
level
Half brick masonry (1st class) in cement mortar 1:4 (1 cement : 4 coarse
sand) in foundation and plinth
Extra for half brick masonry in superstructure above plinth level up to
floor V level
Extra for providing and placing in position 2 Nos. 6mm dia M.S. bars at
every third course of half brick masonry (with F.P.S. bricks)
TOTAL OF SUB-HEAD-4
6
cum
1150
3937.00
4527550.00
cum
1090
324.00
353160.00
sqm
4200
551.00
2314200.00
sqm
4030
71.00
286130.00
sqm
4030
47.80
192634.00
192634.00
7481040.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-5
9.1
5.1
9.1.1
9.53
5.2
9.21
5.3
9.21.1
a)
9.23
5.4
9.97
5.5
9.97.3
9.97.5
9.100
5.5.1
5.5.2
5.6
9.100.1
9.100.3
9.101
a)
b)
5.7
9.101.2
9.96
a)
5.8
Description of item
Unit
DSR
NS
Amount (Rs.)
DSR items
NS items
WOOD WORK
Providing wood work in frames of doors, windows, clerestory windows
and other frames, wrought framed and fixed in position:
Second class teak wood.
Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame
with 10mm diameter bolts, nuts and wooden plugs and embeddings in
cement concrete block 30x10x15 cm 1:3:6 mix( 1 cement:3 coarse
sand:6 graded stone aggregate 20mm nominal size)
cum
5.30
52090.00
276077.00
each
504
61.50
30996.00
sqm
320
929.95
297584.00
sqm
320
284.55
91056.00
200 x 10 mm
100 x 10 mm
Providing and fixing aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete:
each
each
380
485
52.00
32.15
19760.00
15592.75
125 mm
75mm
Providing and fixing aluminium hanging floor door stopper ISI marked
anodised (anodic coating not less than grade AC 10 as per IS : 1868)
transparent or dyed to required colour or shade with necessary screws
etc. complete:
Twin rubber stopper
Providing and fixing aluminium sliding door bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent
or dyed to required colour and shade with nuts and screws etc complete:
300 x16mm
each
each
112
533
48.80
28.35
5465.60
15110.55
each
134
53.90
7222.60
each
50
158.50
7925.00
Providing and fixing ISI marked flush door shutters conforming to
IS:2202(Part I) non-decorative type, core of block board construction
with frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on both
faces of shutters
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws.
Extra for providing lipping with 2nd class teak wood battens 25mm
minimum depth on all edges of shutters (over all area of door shutter to
be measured) over above item.
Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete:
9.96.1
BOQ
Qty
7
CIVIL
DSR Sl. No.
2007/NS
9.76
9.67
9.67.2
BOQ
Rate (Rs.)
Description of item
Unit
Providing and fixing bright finished brass 100 mm mortice latch and lock
with 6 levers and a pair of Brass handles with necessary screws etc.
complete (Best make of approved quality)
5.10 Providing and fixing oxidised M.S. hasp and staple (safety type)
conforming to IS: 363 with necessary screws etc. complete.
5.10.1 115 mm
TOTAL OF SUB-HEAD-5
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
5.9
8
each
34
332.65
11310.10
each
48
10.95
525.60
778625.20
0.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-6
5.22
6.1
5.22.6
9.48
a)
6.2
9.48.2
10.18
a)
6.3
10.2
6.4
10.25
6.5
10.25.2
6.5.1
10.5
6.6
10.5.2
a)
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
STEEL WORK
Reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete.
Thermo-Mechanically Treated bars
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. Flats,square or round bars etc. all complete.
Fixed to openings / wooden frames with rawl plugs screws etc.
Providing and fixing circular/hexagonal cast iron or M.S. sheet box for
ceiling fan with clamp of internal dia 140 mm, 73 mm height, top lid of
1.5 mm M.S. sheet with its top surface hacked for proper bonding,top lid
shall be screwed into cast iron/M.S. sheet box by means of 3.3 mm dia
round headed screws,one lock at the corners. Clamps shall be made of
12 mm dia M.S. bar bent to shape as per standard drawing .
Structural steel work riveted,bolted or welded in built up sections,
trusses and framed work including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer all complete.
Steel work welded in builtup sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of approved steel
primer using structural steel etc.as required
In gratings, frames, guard bar, ladders, railings, brackets, gates &
similar works
Providing and fixing 1 mm thick M.S sheet door with frame of 40x40x6
mm angle iron and 3 mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming
coat of approved steel primer.
Using flats 30x6 mm for diagonal braces and central cross piece.
TOTAL OF SUB-HEAD-6
9
kg
495000
42.70
21136500.00
kg
9200
64.40
592480.00
each
187
81.20
15184.40
kg
10350
46.35
479722.50
kg
1800
51.20
92160.00
sqm
10
1600.10
16001.00
22332047.90
0.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-7
11.26
7.3
11.27
7.4
11.31
7.5
11.32
7.6
11.36
7.7
11.37
7.8
NS
7.9
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade
of the slab including rubbing and polishing complete with base of 1:4 (1
cement : 4 coarse sand):
25 mm thick
Kota stone slabs 25mm thick in risers of steps, skirting, dado and pillars
laid on 12mm (average) thick cement moratr 1:3 (1 cement:3 coarse
sand) and jointed with grey cement slurry mixed with pigment to match
the shade of the slabs, including rubbing and polishing complete.
sqm
sqm
Extra for pre finished nosing in treads of steps of kota stone / sand stone
slab.
metre
Extra for kota stone/sand stone in treads of steps and risers using single
.length up to 1.05 metre.
sqm
Providing and fixing 1st quality Ceramic glazed wall tiles conforming to
IS : 15622 (thickness to be specified by the manufacturer) of approved
make in all colours,shades,design and prints except begundy, bottle
green, black of any size as approved by Engineer-in-Charge in skirting,
risers of steps and dados over 12 mm thick Cement Mortar 1:3 (1
Cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg
per sqm including pointing in white cement mixed with pigment of
matching shade etc. complete.
sqm
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness
to be specified by the manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as White, Ivory, Grey, Fume
Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4
Coarse sand) including pointing the joints with white cement and
matching pigments etc., complete.
sqm
Providing and layingVitrified floor tiles in different sizes (thickness to be
specified by the manufacturer) with water absorptions less than 1% and
flexural strength not less than 30N/mm 2, in all colours and shades, laid
on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including
grouting the joints with white cement and matching pigments
etc.complete.
sqm
Size of Tile 60 x 60 cm
TOTAL OF SUB-HEAD-7
10
2820
694.40
1958208.00
517
676.75
349879.75
330
26.40
8712.00
316
6.45
2038.20
2385
556.60
1327491.00
1285
598.65
769265.25
391
1519.00
4415594.20
593929.00
593929.00
CIVIL
DSR Sl. No.
2007/NS
SUB-HEAD-8
12.22
8.1
22.7
8.2
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
ROOFING AND WATER PROOFING
Making khurras 45x45cm with average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone
aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400
micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse
sand) and a coat of neat cement rounding the edges and making and
finishing the outlet complete
Providing and laying integral cement based water proofing treatment
including preparation of surface as required for treatment of roofs,
balconies, terraces etc. consisting of following operations.
a) Applying and grouting a slurry coat of neat cement using 2.75 Kg /
sqm of cement admixed with water proofing compound conforming to
IS:2645 and approved by Engineer -in -charge over the R.C.C. slab
including adjoining walls upto 300mm height including cleaning the
surface before treatment.
b) Laying brick bats with mortar using broken bricks/brick bats 25mm to
115mm size with 50% of cement mortar 1:5 ( 1 cement:5 Coarse sand )
admixed with water proofing compound conforming to IS:2645 and
approved by Engineer - in -charge over 20mm thick layer of cement
mortar of mix 1:5 ( 1 cement:5 Coarse sand ) admixed with water
proofing compound conforming to IS:2645and approved by Engineer - in
-charge to required slope and treating similarly the adjoining walls upto
300mm height including rounding of junctions of walls and slabs.
each
10
108.00
1080.00
sqm
615
536.40
329886.00
c) After two days of proper curing applying a second coat of cement
slurry using 2.75 kg/sam. Of cement admixed with water proofing
compound conforming to IS:2645 and approved by Engineer - in -charge
d) Finishing the surface with 20mm thick jointless cement mortar of mix
1:4 (1 cement:4 coarse sand) admixed with water proofing compound
conforming to IS:2645 and approved by Engineer - in -charge including
laying glass fibre cloth of approved quality in top layer of plaster and
finally finishing the surface with trowel with neat cement slurry and
making pattern of 300x300mm square 3mm deep.
e) The whole terrace so finished shall be flooded with water for a
minimum period of two weeks for curing and for final test. All above
operations to be done in order and as directed and specified by the
Engineer -in-charge.
With average thickness of 120mm and minimum thickness at khurra as
65mm.
BOQ
11
CIVIL
DSR Sl. No.
2007/NS
22.5
8.3
12.50
8.4
12.51
8.5
12.51.2
12.51.6
BOQ
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Providing and laying water proofing treatment in sunken portion of WCs,
bathroom etc., by applying cement slury mixed withwater proofing
compoundconsisting of applying :a)First layer of slurry of cement @
0.488 kg/sqm mixed with water proofing cement compound @ 0.253
kg/sqm. This layer will be allowed to air cure for 4 hours.b)Second layer
of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement
compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4
hours followed with water curing for 48 hours.This rate includes
preparation of surface, treatment and sealing of all joints, corners,
junctions of pipes and masonary with ploymer mixed slurry.
sqm
Supply & installation of precoated galvanised iron profile sheets(size,
shape and pitch of configuration as approved by Engineer-inCharge)0.50mm+/- 5% total coated thickness (TCT) thick Zinc coating
120gsm as per IS: 277 in 240mpa steel grade,5-7 microns epoxy primer
on both side of the sheet and polyester top coat 15 - 18 microns. Sheet
should have protective guard film of 25 microns minimum to avoid
scratches while transportation and should be supplied in single length
upto 12metre or as desired by Engineer-in-Charge. The sheet shall be
fixed using self drilling/self tapping screws of size (5.5 x55 mm) with
EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm
diameter with bitumen and G.I. limpet washers or with G.I.limpet
washers filled with white lead complete upto any pitch in
horizontal/vertical or curved surfaces excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever
required.
sqm
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50mm+/- 5% total coated thickness (TCT) zinc coating
120gsm asper IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer
on both side of the sheet and polymer top coat 15-18 microns using self
drilling / self tapping screws or with polymer coated J or L hooks, bolts
and nuts and or G.I. seam bolts and nuts, G.I.Plain and bitumen
washers complete:
Flashing/ Aprons (Upto 600mm )
metre
Gutter (600mm over all girth)
metre
TOTAL OF SUB-HEAD-8
12
325
143.85
46751.25
1500
440.65
660975.00
45
155
448.15
547.80
20166.75
84909.00
1143768.00
0.00
CIVIL
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-9
13.2
Description of item
Unit
15 mm cement plaster on the rough side of single or half brick wall of
mix :
1:6 (1 cement : 6 fine sand)
13.4
9.2
12 mm cement plaster of mix:
13.4.2
13.16
13.16.1
13.3
a)
9.3
1:6 (1 cement : 6 coarse sand)
6mm cement plaster to ceiling of mix
1:3 ( 1 cement :3 fine sand)
20mm cement plaster of mix
9.4
13.3.1
13.21
9.5
13.37
13.37.1
13.41
9.6
a)
9.7
13.41.1
a)
13.47
9.8
13.47.1
9.8.1
13.62
9.9
13.62.1
a)
13.50
13.50.1
9.10
a)
13.50.4
b)
BOQ
DSR
NS
Amount (Rs.)
DSR items
NS items
FINISHING
9.1
13.2.2
Qty
sqm
3345
78.55
262749.75
sqm
6115
72.70
444560.50
sqm
3395
62.15
210999.25
6390
110.45
705775.50
15
28.85
432.75
sqm
4160
6.75
28080.00
sqm
7947
41.55
330197.85
sqm
6390
60.10
384039.00
sqm
2185
51.30
112090.50
sqm
765
16.55
12660.75
sqm
1420
7.15
10153.00
2501738.85
1:4 (1 cement : 4 fine sand)
sqm
Extra for providing and mixing water proofing material in cement plaster per bag
work in proportion recommended by the manufacturers.
of 50kg.
Cement
used in
the mix.
White washing with lime to give an even shade:
New work (three or more coats)
Distempring with oil bound washable distemper of approved brand and
manufacture to give an even shade:
New work( two or more coats) over and including priming coat with
cement primer.
Finishing walls with Premium Acrylic Smooth exterior paint with Silicon
additives of required shade
New work (Two or more coats applied @ 1.43 ltr/10 sqm. over and
including base coat of water proofing cement paint applied @ 2.20 kg/10
sqm)
Painting with synthetic enamel paint of approved brand and manufacture
of required colour to give an even shade:
Two or more coats on new work over an under coat of suitable shade
with ordinary paint of approved brand and manufacture.
Applying a priming coat:
With ready mixed pink or grey primer of approved brand and
manufacture on wood work (hard and soft wood)
With ready mixed red oxiide zinc chromate primer of approved brand
and manufacture on steel work (second coat)
TOTAL OF SUB-HEAD-9
13
0.00
CIVIL
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
SUB-HEAD-10 ALUMINIUM WORK
21.1
10.1
21.1.1
21.1.1.1
a)
21.1.2
b)
21.1.2.1
21.3
10.2
21.3.1
21.3.2
DSR 2002
16.20
a)
b)
10.3
BOQ
Providing and fixing anodised aluminium work for doors, windows,
ventilators, and partitions with extruded built up standard tubular
sections / appropriate Z sections and other sections of approved make
conforming to IS:733 and IS: 1285, fixed with rawl plugs and screws or
with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junction at top, bottom and sides with required PVC
/ neoprene felt etc. Aluminium sections shall be smooth, rust free,
straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing/paneling, C.P
brass/stainless steel screws all complete as per architectural drawing
and direction of Engineer in charge (Glazing and Paneling to be paid
for separately).
For Fixed Portion
Anodised aluminium (anodised transparent or dyed to required shade
acording to is 1868 , minium anodic coating of grade AC 15)
For shutters of door, windows & ventilators including providing and fixing
hinges /pivots and making provision for fixing of fittings wherever
required including the cost of PVC/Neoprene gasket required (Fittings
shall be paid for separately.)
Anodised aluminium (anodised transparent or dyed to required shade
acording to is 1868 , minium anodic coating of grade AC 15)
Providing and fixing glazing aluminium door, window, ventilator shutters
and partition etc. with PVC/neoprene gasket etc.complete as per the
architectural drawings and the directions of engineer in charge (cost of
aluminium snap beading shall be paid in basic item).
With float glass panes 4.00 mm thickness
With float glass panes 5.50mm mm thickness
Providing and fixing factory made medium density particle board door
shutters flat pressed three layer prelaminated particle board exterior
grade, IS:3087 marked ( Novapan,Ecoboard,Bhutan Board etc.) grade-I
and prelamination conforming to IS : 12823 Grade-I type II both side
decorative matt lamination of approved design, and edges sealed with
water resistant paint and lipped with aluminium U type edge beading
alround the shutter, including fixing with angle cleat, grip strip, cadmium
plated steel screws including fixing of aluminium hinges 100X63X4mm
etc. complete as per the architectural drawing and direction of Engineerin -charge (cost of U beading and hinges will be paid for separately) :
25mm thick
14
kg
1805
290.45
524262.25
kg
3565
310.45
1106754.25
sqm
sqm
145.00
785
554.95
673.55
80467.75
528736.75
sqm
75
1684.10
126307.50
CIVIL
DSR Sl. No.
2007/NS
DSR 2002
16.21
BOQ
10.4
Rate (Rs.)
Description of item
Unit
Providing and fixing aluminium U beading of required size to
prelaminated / flush door shutter including fixing etc. complete as per
direction of Engineer-in- charge.
TOTAL OF SUB-HEAD-10
15
kg
Qty
40
DSR
305.75
NS
Amount (Rs.)
DSR items
12230.00
2378758.50
NS items
0.00
CIVIL
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
SUB-HEAD-11 MISCELLANEOUS WORKS
8.10
11.1
Providing and fixing stone slab table rubbed edges rounded and polished
of size 75x50 cm deep and 1.8 cm thick fixed urinal partion by cutting
and chase of appropriate width with chase cutter and embedding the
stone in the chase with epoxy grout ir with cement concrete 1:2:4 1
cement :2 coarse sand : 4 graded stone aggregate 6 mm nominal size)
as per direction of Engineer -in charge and finished and smooth.
8.10.2
NS
a)
11.2
Granite Stone of approved shade
Supplying and fixing STAINLESS STEEL 'Logo' of size 1.5m x 1.2m
(approx) and of approved design, fix to wall with aluminium frame and
proper fixing system as directed by the Engineer-in-charge all complete.
4.17
11.3
NS
11.4
Making plinth protection with 50mm thick cement
concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate
20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal
size well rammed and consolidated and grouted with fine sand including
finishing the top smooth.
Providing and fixing Polycarbonate sheet vault with fixing system
specified by manufacturer and EPDM Gasket with MS Hollow Section
with necessary anchoring accessories. (Dia:6m,Ht.:3m): with 3mm thick
Compact Clear/Bronze (PT-1003/2003) Polycarbonate sheet and MS
supporting structure including primer and enamel painting etc. complete
and approved by Engineer-in-Charge.( The work shall be carried out by
approved and specialised agency)
NS
11.5
BOQ
Providing and fixing fire hose cabinet door 1200x1500 mm with
40x75x14 gauge pressed steel door frame with 25x5x100 mm M.S.
holdfast fixed in concrete block in masonry, including shutters of
40x75x14 gauge pressed steel stiles including 4 mm thick clear glass
fixed with 12x12 mm M.S. beading, fixing 75x40 mm brass hinges,
Welding a 40x6mm M.S. flat on the right shutter, including 2 coats of
approved steel primer and synthetic enamel paint of approved quality
and shade, complete as per drawing.
16
sqm
13.5
2595.00
35032.50
LS
1
sq.m
300
sqm
80
11677.00
934160.00
No
15
5063.00
75945.00
243000.00
222.65
243000.00
66795.00
CIVIL
DSR Sl. No.
2007/NS
8.2
8.2.2
8.2.2.2
DSR 2002
12.84
Rate (Rs.)
Description of item
Unit
Providing and fixing 18mm thick gang saw cut mirror
polished(premoulded and prepolished) machine cut for kitchen
platforms,vanity counters facias and similar locations of size of
approved shade,colour and texture laid over 20mm thick base cement
mortar 1:4 ( 1 cement:4 coarse sand) with joints treated with white
cement, mixed with matching pigment,epoxy touch ups, including
rubbing, curing moulding and polishing to the edge to give high gloss
finish etc. complete at all levels complete at all levels (Area of slab 1.0
sqm but upto 2.0 sqm)
Granite of any colour and shade
Area of slab over 0.50 sqm.
11.7 Providing and fixing 15mm thick USG - Radar Mineral Fibre False
Ceiling Tiles or equivalent of size 600x600 mm in true horizontal levels
suspended on inter locking metal grid of hot dipped galvanied steel
sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner
suitably spaced at joints to get required length and of size 24x38mm
made from 0.30mm thick (minimum) sheet, 1200mm long spaced
between main "T" at 600mm center to center to form a grid of
1200x600mm and secondary cross "T" of length 600mm and size
24x25mm made of 0.30mm thick (minium) sheet to be interlocked at
middle of the 1200x600mm panel to form grids of 600x600mm and
laying 15mm thick mineral fibre false eiling tiles of approved texture in
the grid including, wherever, required, cutting/making, opening for
services like diffusers, grills, light fittings, fixtures, smoke detectors etc.
Main "T" runners to be suspended from ceiling using GI slotted cleats
fixed to ceiling with 6mm dia and 50mm long dash fasteners, 4mm GI
adjustable rods with galvanised level clips spaced at 1200m center to
exposed width of 24mm of all T-sections shall be pre-painted with
polyester paint, all complete at all heights as per specifications drawings
and as directed by Engineer-in-Charge.
Note: i) Only Mineral Fibre Ceiling area will be measured for the purpose of
payment
ii) The Mineral Fibre Ceiling shall either be precast (moulded) or wetted
product and shall have NRC value of 0.5(minimum) CAC 35-39, light
reflection 84% (minimum), fire rating class A as per ASTM E-84,
suitable for 95% relatie humidity and also having Thermal Reswistancce
"(R)"=0.33M sq. deg. C/W
iii) The job to be carried out by reputed company like Lioyds insulations
( India) Ltd., or equivalent having sufficient wok experience.
DSR
NS
Amount (Rs.)
DSR items
NS items
11.6
sqm
38
2543.65
sqm
1450
931.40
96658.70
1350530
1549016.20
TOTAL OF SUB-HEAD-11
BOQ
Qty
17
1253105.00
CIVIL
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
SUB-HEAD-12 SITE DEVELOPMENT WORKS
2.6
2.6.1
2.25
16.1
16.3
16.3.5
16.5
16.5.1
4.6
4.6.1
23.2
1.1
1.1.2
1.1.3
BOQ
12.1
Earthwork in excavation by mechanical means (hydraulic
excavator)/manual means over areas (exceeding 30cm in depth, 1.5m in
width as well as 10sqm on plan) including disposal of excavated earth
lead upto 50m and lift upto 1.5m, disposed earth to be levelled and
neatly dressed :
12.1.1 All kinds of soil
12.2 Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layer not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering, lead up to
50 m and lift upto 1.5 m
12.3 Preparation and consolidation of subgrade with power road roller of 8 to
12 tonne capacity after excavating earth to an average of 22.5cm depth,
dressing to camber and consollidating with road roller including making
good the undulations etc. and re-rolling the subgrade and disposal of
surplus earth lead upto 50 metres
12.4 Supplying and stacking at site.
12.4.1 Over burnt (jhama) brick aggregate 90 mm to 45 mm
12.5 Laying water bound macadam sub-base with brick aggregate and
blinding material, earth etc. including screening, sorting and spreading
to template and consolidation with light power road-roller etc. complete
(payment for brick aggregate and moorum etc. to be made separately)
12.5.1 Over burnt (Jhama) brick aggregate 90mm to 45mm
12.6 Providing and fixing at or near ground level precast cement concrete in
kerbs, edgings etc. as per approved pattern and setting in position with
cement mortar 1:3 (1 cement :3 coarse sand) including the cost of
required centring, shuttering and finishing smooth with 6 mm thick
cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces
complete.
12.6.1 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size)
12.7 Supplying and stacking of good earth at site including royalty and
carriage upto 1 km (earth measured in stacks will be reduced by 20% for
payment).
12.8 Carriage of material by mechanical transport including loading,
unloading and stacking upto 5 Km
12.8.1 Earth
12.8.2 Manure
18
cum
1168
101.85
118960.80
cum
1332
45.70
60872.40
sqm
811
33.90
27492.90
cum
125
438.85
54856.25
cum
125
136.20
17025.00
cum
10
4115.15
41151.50
cum
55
16.95
932.25
cum
cum
5330
4
76.48
66.51
407638.40
266.04
CIVIL
DSR Sl. No.
2007/NS
NS
4.1
4.1.8
4.1.6
NS
13.3.1
13.44
13.44.1
23.3
23.10
23.10.3
16.42
NS
23.14
23.14.1
23.14.2
BOQ
Rate (Rs.)
Description of item
Unit
Filling areas with good earth in layer not exceeding 20cm in depth,
consolidating each deposited layer by ramming and watering to at least
95% of MDD(Proctor Density).
12.10 Providing and laying in position cement concrete of specified grade
excluding the cost of centering and shuttering - All work upto plinth level.
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
12.9
12.10.1 1:4:8 (1 Cement : 4 coarse sand :8 graded stone aggregate 40 mm
nominal size)
12.10.2 1:3:6 (1 Cement:3 coarse sand:6 graded stone aggregate 20 mm
nominal size)
12.11 First class brick work in foundations and plinth in cement mortar 1:6 (1
cement : 6 coarse sand)
12.12 20mm thick cement plaster of mix
1:2 (1cement: 4 fine sand)
12.13 Finishing walls with waterproof cement paint of required shade
12.14 New work (Two or more coats applied @3.84 kg/10sqm)
12.15 Supplying and stacking sludge at site including royalty and carriage upto
1 km (sludge measured in stacks will be reduced by 8% for payment).
cum
4445
cum
85
2449.00
208165.00
cum
21
2713.05
56974.05
cum
5
sqm
1000
110.45
110450.00
sqm
1000
30.80
30800.00
38
136.85
5200.30
80
384.85
30788.00
85
3638.55
309276.75
cum
12.16 Grassing with DOOB grass, including watering and maintenance of the
lawn for 30 days or more till the grass forms a thick lawn free from
weeds and fit for mowing including supplying good earth if needed ( the
good earth will be paid separately),
In rows 5cm apart in either direction
100sqm
12.17 Cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone
aggregate 40 mm nominal size) in pavement, laid to requried slope and
camber in panels as required including consolidation finishing and
tamping complete.
cum
12.18 Supplying and filling, in plinth with locally available sand under floors
including, watering, ramming consolidating and dressing complete.
cum
12.19 Digging holes in ordinary soil and refilling the same with the excavated
earth, mixed with manure or sludge in the ratio of 2:1by volume(2 parts
of stacked volume of earth after reduction by 20% : 1 part of stacked
volume of manure after reduction by 8%), flooding with water, dressing
including removal of rubbish and surplus earth, if any with all leads and
lifts (cost of manure, sludge or extra good earth if needed to be paid for
separately)
12.19.1 Hole 1.2m dia and 1.2m deep
each
12.19.2 Hole 60cm dia and 60cm deep
each
19
160.00
3937.00
20
22
11
711200.00
19685.00
307.15
146.65
19.25
6143.00
3226.30
211.75
CIVIL
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
23.9
12.20 Mixing earth and sludge or manure in proportion specified or directed.
23.20
12.21 Filling mixture of earth and sludge or manure in the desired proportion in
trenches, flooding with water and levelling (cost of supllying earth and
sludge or manure and mixing excluded)
12.22 Supplying and planting best quality container grown healthy trees of
1.5m height of species as specified including 1 tears maintenance. All
trees to be approved before planting .
TOTAL OF SUB-HEAD-12
NS
BOQ
20
Qty
DSR
NS
Amount (Rs.)
DSR items
cum
138
7.85
1083.30
cum
138
3.95
545.10
No
33
300.00
1485916.09
NS items
9900.00
746928.00
CIVIL
SANITARY & PLUMBING WORKS
(Page No. 1 to 18)
ABSTRACT OF COST - PLUMBING WORKS
AMOUNT (Rs.)
SL. No.
DESCRIPTION
DSR Item
BOQ
1
TOTAL OF SUB HEAD 1 - (SANITARY INSTALLATIONS)
2
Non Schedule Item
1310202.70
488527.94
TOTAL OF SUB HEAD 2 - (WATER SUPPLY)
665421.60
98937.00
3
TOTAL OF SUB HEAD 3 - (DRAINAGE)
350477.25
281728.62
4
TOTAL OF SUB HEAD 4 -(STORM WATER DRAINAGE)
472,133.90
86,640.50
5
TOTAL OF SUB HEAD 5 - (RAIN WATER PIPES AND FITTINGS)
92105.40
0.00
6
TOTAL OF SUB HEAD 6 - (PUMPING SYSTEM)
0.00
163219.00
7
TOTAL OF SUB HEAD 7 - (TUBE WELL AND TUBE WELL PUMPS)
0.00
579979.00
TOTAL
2890340.85
1699032.06
GRAND TOTAL
4589372.91
1
ABST PLUMBING
SCHOOL OF PHYSICAL SCIENCES AT AIZAWL, MIZORAM
BILL OF QUANTITY - PLUMBING WORKS
DSR Sl. No.
2007/NS
SUB-HEAD-1
Rate (Rs.)
Description of item
Unit
DSR
NS
Amount (Rs.)
DSR items
NS items
SANITARY INSTALLATIONS
17.1
1.1
Providing and fixing water closet squatting pan (Indian type W.C.pan)
with 100mm sand cast iron P or S trap, 10 ltr. Low level white P.V.C.
flushing cistern with manually controlled device (handle lever) confirming
to IS : 7231, with all fittings and fixtures complete including cutting and
making good the walls and floors wherever rquired:
17.1.1
1.1.1
17.3
1.2
17.3.1
17.4
1.2.1
1.3
17.4.1
17.4.3
1.3.1
1.3.2
17.7
1.4
17.7.4
1.4.1
17.10
1.5
17.10.1
a)
White Vitreous china Orissa pattern WC pan of size 580x440mm, with
integral type foot rests.
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P flush bend, with fittings & C.I. brackets, 40mm
flush bend, overflow arrangement with specials of standard make and
mosquito proof coupling of approved municipal design complete
including painting of fittings and brackets, cutting and making good the
walls and floors wherever required.
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm
sizes respectively with automatic flushing cistern with standard flush
pipe and C.P. brass spreaders with brass unions and G.I. clamps
complete, including painting of fittings and brackets, cutting and making
good the walls and floors wherever required:
One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
Range of three urinal basins with 10 litre white P.V.C. automatic flushing
cistern.
Providing and fixing wash basin with C.I. brackets, 15mm CP brass
pillar taps, 32mm CP brass waste of standard pattern, including painting
of fittings and brackets, cutting and making good the walls wherver
required:
White Vitreous China Falt back wash basin size 550x400mm with single
15mm C.P. brass pillar tap
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per
IS:13983 with C.I. Brackets and stainless steel plug 40mm including
painting of fittings and brackets, cutting and making good the walls
wherever required:
Kitchen sink with drain board
BOQ
Qty
2
each
24
2304.65
55311.60
each
53
3282.95
173996.35
each
2
2018.70
4037.40
each
12
4491.60
53899.20
each
58
1044.90
60604.20
PLUMBING
DSR Sl. No.
2007/NS
17.10.1.3
17.28
1.5.1
1.6
17.28.1
17.28.2.2
17.11
a)
1.6.1
1.7
17.11.2
17.31
1.7.1
1.8
17.34
17.34.1
N.S.
18.49
1.9
a)
1.10
1.11
18.49.1
18.53
18.53.1
18.21
18.21.2
18.21.2.1
N.S.
N.S.
17.71
17.73
17.73.2
BOQ
Rate (Rs.)
Description of item
Unit
510x1040mm bowl depth 200mm.
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete
Flexible pipe
40mm dia
Providing and fixing white vitreous china laboratory sink with C.I.
Brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and
40mm C.P. brass trap with necessary C.P. brass unions complete
including painting of fittings and brackets, cutting and making good the
wall wherever required:
Size 600 x 450 x 200mm
Providing and fixing 600x450mm bevelled edge morror of superior galss
(of approved quality) complete with 6mm thick hard board ground fixed
to wooden cleats with CP brass screws and washers complete.
Providing and fixing toilet paper holder:
CP brass
Providing and fixing C.P. robe hooks of an approved equivalent.
Providing and fixing CP brass bib cock of approved quality conforming
to IS:8931.
1.11.1 15mm nominal bore
1.12 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931.
1.12.1 15mm nominal bore
1.13 Providing and fixing uplasticised PVC connection pipe with brass unions.
a)
45 cm length
1.13.1 15mm nominal bore
1.14 Providing and fixing C.P. sink mixer with swinging spout of approved
equivalent.
1.15 Providing & fixing C.P. sink cock with Elbow action of approved
equivalent.
1.16 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and colour,
weighing not less than 105 gms.
1.17 Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fitting arrangement
of approved quality and colour.
1.17.1 600mm long towel rail with total length of 645 mm width, 78 mm and
effective height of 88 mm, weighingnot less than 190 gms.
3
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Each
2
5225.15
10450.30
Each
83
49.10
4075.30
Each
25
2149.95
53748.75
Each
58
493.65
28631.70
Each
Each
53
77
147.10
each
77
207.00
15939.00
Each
173
347.65
60143.45
Each
173
44.75
7741.75
Each
2
2382.00
4764.00
Each
25
625.00
15625.00
Each
58
164.65
9549.70
Each
33
329.50
10873.50
7796.30
648.00
49896.00
PLUMBING
DSR Sl. No.
2007/NS
18.58
18.58.1
18.58.1.1
N.S.
1.18
a)
1.18.1
1.19
N.S.
N.S.
17.35
17.35.1
17.35.1.2
17.35.2
17.35.2.2
17.37
1.19.1
1.19.2
1.20
a)
1.20.1
b)
1.20.2
1.21
17.37.1
17.37.2
N.S.
1.21.1
1.21.2
1.22
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
a)
1.22.1
1.23
a)
1.23.1
b)
1.23.2
1.24
a)
1.24.1
b)
1.24.2
1.25
N.S.
N.S.
a)
1.25.1
N.S.
BOQ
Rate (Rs.)
Description of item
Unit
Providing and fixing PTMT grating of approved quality and colour
Circular Type
100mm nominal dia
Each
Providing and fixing automatic high pressure electric water heaters
(Recold or approved equivalent) with glass lining thermostats with each
element and high temperature cut off, necessary insulation, safety valve,
etc., all complete.
15 Litres
Each
25 Litres
Each
Providing and fixing soil, waste and vent pipes
100mm diameter
Centrifugally cast (spun) iron socketed pipe as per IS:3989
Metre
75mm diameter
Centrifugally cast (spun) iron socketed pipe as per IS:3989
Metre
Providing and fixing M.S. holder-bat clamps of approved design to sand
cast iron/cast iron (spun) pipe embedded in and including cement
concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size) including cost of cutting
holes and making good the walls, etc.
For 100mm dia pipe
Each
For 75mm dia pipe
Each
Providing and fixing single unequal junction of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts
complete.
100x100x75mm
Centrifugally cast (spun) iron as per IS:3989
each
Providing and fixing plain bend of required degree:
100mm
Centrifugally cast (spun) iron as per IS:3989
Each
75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and fixing heel rest sanitary bend
100mm dia
Centrifugally cast (spun) iron as per IS:3989
Each
75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and fixing single equal plain junction of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts
complete
100 x 100 x 100mm
Centrifugally cast (spun) iron as per IS:3989
Each
4
Qty
22
DSR
NS
39.70
2
12
Amount (Rs.)
DSR items
NS items
873.40
5484.00
6057.00
10968.00
72684.00
684
730.40
499593.60
106
629.85
66764.10
380
16
65.35
63.00
24833.00
1008.00
76
933.35
70934.71
48
346.33
16623.65
18
261.72
4711.00
34
419.50
14263.09
2
365.52
731.04
84
717.26
60250.18
PLUMBING
DSR Sl. No.
2007/NS
N.S.
1.26
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
17.58
a)
1.26.1
1.27
a)
1.27.1
b)
1.27.2
1.28
17.58.1
17.58.2
17.59
1.28.1
1.28.2
1.29
17.59.1
17.59.2
N.S.
1.29.1
1.29.2
1.30
N.S.
N.S.
N.S.
N.S.
17.6
a)
1.30.1
b)
1.30.2
1.31
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
N.S.
a)
1.31.1
b)
1.31.2
1.32
a)
1.32.1
b)
1.32.2
1.33
N.S.
1.33.1
BOQ
Rate (Rs.)
Description of item
Unit
Providing and fixing double unequal junction of required degree with
access door, insertion rubber washer 3mm thick, bolts and nuts
complete:
100 x 100 x 75 x 75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and fixing terminal guard
100mm
Centrifugally cast (spun) iron as per IS:3989
Each
75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing lead caulked joints to sand cast iron/centrifugally cast (spun)
iron pipes and fittings of diameter
100mm
Each
75mm
Each
Providing and fixing M.S. stays and clamps for sand cast
iron/centrifugally cast (spun) iron pipe of diameter:
100mm
Each
75mm
Each
Providing and fixing door piece, insertion rubber washer 3mm thick,
bolts and nuts complete:
100mm
Centrifugally cast (spun) iron as per IS:3989
Each
75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and fixing trap of self cleansing design with screwed down or
hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors:
100mm inlet and 75mm outlet
Centrifugally cast (spun) iron as per IS:3989
Each
100mm inlet and 100mm outlet
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and fixing collar
100mm
Centrifugally cast (spun) iron as per IS:3989
Each
75mm
Centrifugally cast (spun) iron as per IS:3989
Each
Providing and laying cement concrete 1:2:4 mix (1 cement : 2 coarse
sand : 4 sand aggregate 20mm down grade) 75mm in bed alround C.I.
soil and waste pipe.
100mm and 75mm dia under floor including shuttering and centering
Metre
5
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
2
1234.56
2469.11
34
281.65
9575.97
2
259.96
519.93
940
280
126.50
107.80
118910.00
30184.00
34
2
48.25
41.55
1640.50
83.10
34
434.81
14783.61
2
333.14
666.28
56
839.96
47037.63
18
797.40
14353.19
48
296.96
14253.86
12
214.04
2568.44
174
93.26
16227.24
PLUMBING
DSR Sl. No.
2007/NS
17.65
17.65.1
17.65.2
N.S.
BOQ
Rate (Rs.)
Description of item
Unit
Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent
pipes and fittings with paint of any colour such as chocolate, grey or
buff, etc., over a coat of primer (of approved quality) for new work.
1.34.1 100mm diameter pipe
1.34.2 75mm diameter pipe
1.35 Providing and fixing 100mm dia G.I. Inlet fitting of standard design and
as shown in drawing with two-three inlets, suitable for 32mm to 50mm
G.I. Pipes and 75mm to 100mm outlet.
TOTAL OF SUB-HEAD-1
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
1.34
6
Metre
Metre
510
30
Each
74
17.85
13.70
9103.50
411.00
603.00
1310202.70
44622.00
488527.94
PLUMBING
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-2
18.10
2.1
18.10.1
18.10.2
18.10.3
18.10.4
18.10.5
18.10.6
N.S.
N.S.
18.11
2.1.1
2.1.2
2.1.3
2.1.4
2.1.5
2.1.6
2.1.7
2.1.8
2.2
18.11.1
18.11.2
N.S.
N.S.
18.16
18.16.1
18.16.2
18.17
2.2.1
2.2.2
2.2.3
2.2.4
2.3
2.3.1
2.3.2
2.4
18.17.1
18.17.2
18.17.3
18.17.4
18.17.5
18.17.6
18.18
2.4.1
2.4.2
2.4.3
2.4.4
2.4.5
2.4.6
2.5
18.18.3
N.S.
18.38
2.5.1
2.5.2
2.6
18.38.1
18.38.2
18.38.3
18.38.4
18.38.5
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
WATER SUPPLY
Providing and fixing GI pipes complete with GI fittings and clamps,
including cutting and making good the walls etc.
Internal work - Exposed on Wall
15mm nominal bore
20mm nominal bore
25mm nominal bore
32mm nominal bore
40mm nominal bore
50mm nominal bore
65mm nominal bore
80mm nominal bore
Concealed pipe including painting with anti corrosive bitumastic paint,
cutting chases and making good the wall
15mm dia nominal bore
20mm dia nominal bore
25mm dia nominal bore
32mm dia nominal bore
Providing and fixing brass stop cock of approved quality
15mm nominal bore
20mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
25mm nominal bore
32mm nominal bore
40mm nominal bore
50mm nominal bore
65mm nominal bore
80mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete:
25mm nominal bore
40mm nominal bore
Painting G.I. pipes and fittings with synthetic enamel white paint over a
ready mixed priming coat, both of approved quality for new work
15mm nominal bore
20mm nominal bore
25mm nominal bore
32mm nominal bore
40mm nominal bore
7
Metre
Metre
Metre
Metre
Metre
Metre
Metre
Metre
10
48
50
216
94
136
40
30
105.85
133.85
179.65
226.10
264.05
342.90
1058.50
6424.80
8982.50
48837.60
24820.70
46634.40
Metre
Metre
Metre
Metre
380
220
160
30
144.75
170.15
Each
Each
1
3
191.70
235.20
191.70
705.60
Each
Each
Each
Each
Each
Each
24
11
3
12
3
2
285.50
358.00
399.00
578.20
831.75
1369.25
6852.00
3938.00
1197.00
6938.40
2495.25
2738.50
each
each
6
2
385.90
Metre
Metre
Metre
Metre
Metre
10
48
50
216
94
4.65
5.45
7.20
8.50
10.10
500.00
750.00
20000.00
22500.00
55005.00
37433.00
250.00
350.00
40000.00
10500.00
2315.40
1200.00
2400.00
46.50
261.60
360.00
1836.00
949.40
PLUMBING
DSR Sl. No.
2007/NS
18.38.6
N.S.
N.S.
18.12
2.6.6
2.6.7
2.6.8
2.7
18.12.3
18.12.4
18.12.5
18.12.6
18.12.7
18.13
a)
2.7.1
2.7.2
2.7.3
2.7.4
2.7.5
2.80
18.13.2
18.40
2.8.1
2.9
18.40.3
18.40.4
18.40.5
18.40.6
18.40.7
18.41
2.9.1
2.9.2
2.9.3
2.9.4
2.9.5
2.10
18.41.3
18.41.4
18.41.5
18.41.6
18.41.7
2.9.1
2.10.1
2.10.2
2.10.3
2.10.4
2.11
NS
NS
NS
NS
NS
2.11.1
2.11.2
2.11.3
2.11.4
2.11.5
BOQ
Rate (Rs.)
Description of item
Unit
50mm nominal bore
65mm nominal bore
80mm nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling, etc.,
External work
25mm nominal bore
32mm nominal bore
40mm nominal bore
50mm nominal bore
65mm nominal bore
Making connection of GI distribution branch with G.I. main of following
sizes by providing and fixing tee, including cutting and threading the
pipe etc. complete
50 to 80 mm nominal bore
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic
paint of approved quality
25mm nominal bore
32mm nominal bore
40mm nominal bore
50mm nominal bore
65mm nominal bore
Providing and filling sand of grading zone V or coarser grade alround the
GI pipes in external work
25mm nominal bore
32mm diameter pipe
40mm diameter pipe
50mm diameter pipe
65mm diameter pipe
Providing and fixing 600mm long puddle flanges fabricated out of 6mm
thick M.S. plates along with flanges of suitable size properly fixed in
walls and top slabs of underground tanks.
40mm dia
50mm dia
65mm dia
80mm dia
100mm dia
8
Qty
DSR
NS
Amount (Rs.)
DSR items
Metre
Metre
Metre
136
40
30
11.80
Metre
Metre
Metre
Metre
Metre
120
185
40
50
50
156.85
193.60
219.60
280.10
356.15
18822.00
35816.00
8784.00
14005.00
17807.50
Each
1
423.20
423.20
Metre
Metre
Metre
Metre
Metre
120
185
40
50
50
3.90
4.55
5.20
6.10
7.50
468.00
841.75
208.00
305.00
375.00
Metre
Metre
Metre
Metre
Metre
120
185
40
50
50
22.85
23.40
23.70
24.60
38.85
2742.00
4329.00
948.00
1230.00
1942.50
Each
Each
Each
Each
Each
2
2
1
2
2
NS items
1604.80
14.00
16.00
131.00
188.00
261.00
340.00
459.00
560.00
480.00
262.00
376.00
261.00
680.00
918.00
PLUMBING
DSR Sl. No.
2007/NS
18.32
18.32.1
18.48
BOQ
2.12
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Constructing masonry chamber 30x30x50 cm, inside with 75 class
designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand)
for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged
cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand
: 4 graded stone aggregate 20mm nominal size), necessary excavation,
foundation concrete 1:5:10 mix (1 cement : 5 fine sand : 10 grades stone
aggregate 40mm nominal size), and inside plastering with cement
mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a
floating coat of neat cement, complete as per standard design.
2.12.1 With F.P.S. bricks
Each
2.13 Providing and placing on terrace (at all floor levels ) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet , outlet and overflow
pipes but without fittings and the base support for tank.
per ltr
TOTAL OF SUB-HEAD-2
9
10
55000
599.80
5998.00
5.25
288750.00
665421.60
98937.00
PLUMBING
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-3
19.1
3.1
19.1.1
19.1.2
19.1.4
19.2
3.1.1
3.1.2
3.1.3
3.2
19.2.1
19.2.2
19.2.4
19.3
3.2.1
3.2.2
3.2.3
3.3
19.3.4
19.4
3.3.1
3.4
19.4.2
19.4.2.1
N.S.
a)
3.4.1
3.5
a)
19.8
19.8.1
19.8.1.1
BOQ
3.5.1
3.6
a)
3.6.1
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
DRAINAGE
Providng, laying and jointing glazed stoneware pipes grade 'A' with stiff
mixture of cement mortar in the proportion of 1:1(1cement : 1 fine sand)
including testing joints etc. complete
100 mm diameter
150 mm diameter
230 mm diameter
Providng and fixing cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) alround S.W . Pipe
including bed concrete as per standard desgin :
100 mm diameter S.W.pipe
150 mm diameter S.W.pipe
230 mm diameter S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40mm nominal size) upto haunches of S.W.
pipes including bed concrete as per standard design:
metre
metre
metre
36
270
20
105.90
151.65
269.90
3812.40
40945.50
5398.00
metre
metre
metre
36
270
20
331.20
405.05
516.90
11923.20
109363.50
10338.00
230 mm diameter S.W. pipe
metre
Providing and fixing square - mouth S.W. gully trap grade 'A' complete
with C.I. grating brick masonary chamber with water tight C.I. cover with
frame of 300x300 mm size (inside) the weight of cober to be not less
than 4.50 kg and frame to be not less than 2.70 kg as per stadard
design:
150 x 100mm size P-type
With FPS bricks class designation 75
each
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4
graded stone aggregate 20mm nominal size), foundation concrete 1:4:8
(1 cement : 2 coarse snad : 8 graded stone aggregate 40mm nominal
size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3
coarse sand) finished with floating coat of neat cement and making
channels in cement aggregate 20 mm nominal size) finished with a
floating coat of neat cement complete as per stadard design :
20
328.95
6579.00
18
961.95
17315.10
Inside size 90cm x 80cm and 60cm deep including C.I. cover with frame
(medium duty) 500mm internal dimensions total weight of cover and
frame to be not less than 116 kg. (wt. of cover 58 kg. And wt. of frame
58 kg.)
1. With F.P.S. bricks with class designation 75
each
Extra for depth for manholes
Size 90 x 80 cm
With F.P.S . Bricks class designation 75
meter
10
34
2
8286.14
2654.00
281728.62
5308.00
PLUMBING
Rate (Rs.)
DSR Sl. No.
2007/NS
19.9
3.7
19.9.1
a)
19.9.1.1
19.10
3.7.1
3.8
19.10.1
19.16
3.8.1
3.9
2.10
3.10
2.10.1
a)
BOQ
Description of item
Unit
Constructing brick masonry circular type manhole 0.91m internal dia at
bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse
sand), in side cement plaster 12mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with a floating coat of neat cement,
foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded
stone aggregate 40mm nominal size), and making necessary channel in
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat
cement all complete as per standard design
0.91m deep with S.F.R.C. cover and frame (heavy duty HD-20 grade
designation) 560mm internal diameter conforming to I.S. 12592, total
weight of cover and frame to be not less than 182 kg., fixed in cement
concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate
20mm nominal size) including centering shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at the external
surface shall be paid for separately).
With F.P.S. bricks class designation 75
Each
Extra depth for circular type manhole 0.91m internal dia (at bottom) with
beyond 0.91m to 1.67m)
With F.P.S. bricks class designation 75
Meter
Providing orange colour safety foot rest of minimum 6mm thick plastic
encapsulated as per IS:10910 on 12mm dia steel bar conforming to
IS:1786 having minimum cross section as 23 mm x 25mm and over all
minimum length 263mm and width as 165mm with minimum 112mm
space between protruded legs having 2mm tread on top surface by
ribbing or chequering besides necessary and adequate anchoring
projections on tail length on 138mm as per standard drawing and
suitable to with stand the bend test and chemical resistance test as per
specifications and having manufacture's permanent identification mark
to be visible even after fixing, including fixing in manholes with 30 x 20 x
15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded
stone aggregate 20mm nominal size) complete as per design.
Each
Excavating trenches of required width for pipes, cables, etc., including
excavation for sockets and dressing of sides, ramming of bottoms, depth
upto 1.5m including getting out the excavated soil and then returning the
soil as required, in layers not exceeding 20cm in depth including
consolidating each deposited layer by ramming, watering, etc., and
disposing of surplus excavated soil as directed within a lead of 50m.
Qty
DSR
NS
Amount (Rs.)
DSR items
10
4933.50
49335.00
3
2289.75
6869.25
182.40
21888.00
120
NS items
All kind of soils
11
PLUMBING
DSR Sl. No.
2007/NS
2.10.1.2
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
3.10.1 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.
2.11
3.11
21.39.2
3.12
BOQ
Rate (Rs.)
Description of item
Metre
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for
depth exceeding 1.5m, but not exceeding 3m. (Rate is over
corresponding basic item for depth upto 1.5 metre.)
Metre
Making soak pit 2.5m diameter 3.0 metre deep with 45 x 45 cm dry brick
honey comb shaft with bricks of class designation 75 and S.W. drain
pipe 100mm diameter, 1.8m long complete as per standard design.
Each
With flyash bricks class designation 75
TOTAL OF SUB-HEAD-3
12
306
115.05
35205.30
4
153.00
612.00
4
6396.25
25585.00
350477.25
281728.62
PLUMBING
DSR Sl. No.
2007/NS
SUB-HEAD-4
19.6
4.1
19.6.2
19.6.3
19.6.4
19.2
4.1.1
4.1.2
4.1.3
4.2
19.2.5
N.S.
19.27
4.2.2
4.2.3
4.3
19.27.1
2.10
4.3.1
4.5
2.10.1
2.10.1.2
Rate (Rs.)
Description of item
Unit
DSR
NS
Amount (Rs.)
DSR items
NS items
STORM WATER DRAINAGE
Providing and laying non-pressure NP-2 class (light duty) RCC Pipes
with collars jointed with stiff mixture of cement mortar in the proportion
of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete.
150mm dia RCC pipe
250mm dia RCC pipe
300mm dia RCC pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 fine sand: 10
graded stone aggregate 40mm nominal size) all round R.C.C./S.W.
pipes including bed concrete as per standard design.
250mm dia RCC pipe
300mm dia RCC pipe
Constructing brick masonry road gully chamber 50x45x60cm with bricks
of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand)
including 500x450mm precast RCC horizontal grating with frame
complete as per standard design.
With F.P.S. bricks
Excavating trenches of required width for pipes, cables, etc., including
excavation for sockets and dressing of sides, ramming of bottoms, depth
upto 1.5m including taking out the excavated soil and then returning the
soil as required in layers, not exceeding 20cm in depth including
consolidating each deposited layer by ramming, watering, etc., and
disposing of surplus soil as directed within a lead of 50m.
Metre
Metre
Metre
20
40
48
202.85
258.20
338.75
4,057.00
10,328.00
16,260.00
Metre
Metre
40
48
546.00
Each
10
2248.35
22,483.50
Metre
130
115.05
14,956.50
Cum.
116
103.40
11,994.40
Cum.
16
45.70
731.20
21,840.00
780.00
37,440.00
4.5.1 All kind of soils
4.5.1.1 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.
2.8
4.6
Earth work in excavation by mechanical means (Hydraulic excavator) /
manual means in foundation trenches or drains (not exceeding 1.5m in
width or 10 sqm. on plan) including dressing of sides and ramming of
bottoms, lift upto 1.5m, including getting out the excavated soil and
disposal of surplus excavated soil as directed, within a lead of 50m.
2.8.1
2.25
4.6.1
4.7
All Kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth,
sides of foundations etc. in layers not exceeding 20cm in depth:
consolidating each deposited layer by ramming and watering, lead up to
50m and lift upto 1.5m.
BOQ
Qty
13
PLUMBING
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
NS
4.8
Removal and disposal of surplus excavated earth out side the site
including loading/unloading, stacking and spreading at all lift and lead.
4.1
4.9
Providing and laying in position cement concrete of specified grade
excluding the cost of centring and shuttering - all work upto plinth level.
4.1.9
4.9.1
4.1.4
6.1
6.1.1
13.4
13.4.1
NS
5.12
5.22
5.22.6
BOQ
1:4:8 ( 1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal
size)
4.9.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm
nominal size)
4.10 Brick work with F.P.S. bricks of class designation 75 in foundation and
4.10.1 Cement mortar 1:4 (1 cement : 4 coarse sand)
4.11 12mm cement plaster of mix :
4.11.1 1:4 (1 cement : 4 coarse sand)
4.12 Providing, hoisting and fixing precast reinforced cement concrete in
perforated slab including setting in cement mortar 1:3 (1 cement : 3
coarse sand), cost of required centring, shuttering and finishing with
neat cement punning on exposed surfaces but excluding the cost of
reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 12.5mm nominal size).
4.13 Providing, hoisting and fixing upto floor five level precast reinforced
cement concrete work in string courses, bands, copings, bed plates,
anchor blocks, plain window sills and the like including the cost of
required centring, shuttering, finishing smooth with 6mm thick cement
plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but
excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20mm nominal size).
Reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete.
4.14.1 Thermo-Mechanically Treated bars.
TOTAL OF SUB-HEAD-4
Qty
DSR
NS
Amount (Rs.)
DSR items
Cum.
100
150.00
Cum.
20
2296.15
45,923.00
Cum.
11
3194.10
35,135.10
Cum.
30
2293.40
68,802.00
Sqm.
236
82.55
19,481.80
Cum.
5
Cum.
30
Kg.
1257
NS items
15,000.00
6,840.10
34,200.50
4882.25
146,467.50
42.70
53,673.90
472,133.90
4.14
14
86,640.50
PLUMBING
DSR Sl. No.
2007/NS
SUB-HEAD-5
12.40
12.40.2
12.42
12.42.6
12.42.6.2
12.43
12.43.2
12.44
BOQ
5.1
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
RAIN WATER PIPES AND FITTINGS
Providing and fixing on wall face unplasticised - Rigid PVC rain water
pipes conforming to IS:13592 Type A including jointing with seal ring
conforming to IS:5382 leaving 10mm gap for thermal expansion.
5.1.1 Single socketed pipes
5.1.1.1 110 mm diameter
Metre
5.2 Providing and fixing on wall face unplasticised - PVC moulded
fittings/accessories for unplasticised - Rigid PVC rain water pipes
conforming to IS:13592 Type A including jointing with seal ring
conforming to IS: 5382 leaving 10mm gap for thermal expansion.
5.2.1 Shoe (Plain)
5.2.1.2 110mm Shoe
Each
5.3 Providing and fixing unplasticised - PVC pipe clips of approved design to
unplasticised - PVC rain water pipes by means of 50 x 50 x 50mm hard
wood plugs, screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
5.3.1 110mm
Each
5.4 Providing and fixing to the inlet mouth of rain water pipe cast iron grating
15 cm diametre and weighing not less than 440 grams.
Each
TOTAL OF SUB-HEAD-5
15
390
163.40
63726.00
26
263.10
6840.60
216
96.90
20930.40
26
23.40
608.40
92105.40
0.00
PLUMBING
Rate (Rs.)
DSR Sl. No.
2007/NS
SUB-HEAD-6
N.S.
6.1
6.7
6.7.1
Providing & fixing Earthing Wire
……8….. Guage
6.2
N.S.
6.2.1
6.2.2
6.3
N.S.
6.3.1
6.3.2
6.4
N.S.
6.4.1
6.4.2
6.5
N.S.
6.6
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
PUMPING SYSTEM
6.6.1
N.S.
BOQ
Unit
Supply , Installation, erection & commissioning Horizontal Monoblock
pumping Set having C.I. casing & CI impeller complete with all
accessories, motor of required capacity Pumps shall have following
duty:
Filter Feed Pumps
Flow rate = 300 lpm
Head = 45 mtr
Rating : 7.6. H.P.
RPM = 2900
Quantity = 02 Nos. (1w/1s)
Supply , Installation, erection & commissioning of Suction / delivery
Headers including piping, bends tees, supports.(Make : Jindal) or
equivalent
80 mm dia
65 mm Dia
Providing & Fixing Cast Iron slim seal butterfly valves including nuts
bolts, flangeed end connecions complete. (Make : Sant /Castle) or
equivalent
80 mm dia
65 mm Dia
Providing & Fixing Dual Plate Wafer type slim seal Non Return Valves
complete with nuts bolt, flanged end connections.(Make : Sant / Castle)
or equivalent
80 mm dia
65 mm dia
Supply, installation, testing and commissioning of motor Electrical
Panel suitable for 415 volts, 3 phase, 4 wire,50 Hz power distribution
system.The panel shall be free standing floor / wall mounted, sheet
metal enclosed flush front dust & vermin proof with Aluminium Bus bars.
The painting shall be done as per relevant ISI codes as
specified.Adequate size cable alley shall be provided for each cable
bending & termination. The Panel should have the necessary
components like cylical timer etc. for aotomation of pumps (all
components shall be of L&T / Schneider / GE make).
Providing & fixing PVC insulated copper armoured cables including
necessary supports clams etc (Make : National/Grandlay)
3 Core 4.0 sq mm
6.1.1
N.S.
Description of item
16
Each
2
40838.00
81676.00
set
set
1
1
6806.00
5990.00
6806.00
5990.00
Each
Each
2
2
3267.00
2995.00
6534.00
5990.00
Each
Each
1
2
3880.00
3403.00
3880.00
6806.00
set
1
34031.00
34031.00
Mtr
10
272.00
2720.00
Mtr
6
88.00
528.00
PLUMBING
DSR Sl. No.
2007/NS
N.S.
6.8
N.S.
6.8.1
6.9
BOQ
Rate (Rs.)
Description of item
Unit
Providing & fixing galvanized slotted cable trays supported from walls at
intervals of 60 cm including cable clips eith nuts & bolts, welding of
support rods with ceiling inserts or by drilling and installing expandable
fasteners cutting & making good complete
100 x 50 mm
Automatic Level Controllers (Make : Radar)
TOTAL OF SUB-HEAD-6
17
Mtr
Each
Qty
6
2
DSR
NS
Amount (Rs.)
DSR items
545.00
2494.00
0.00
NS items
3270.00
4988.00
163219.00
PLUMBING
DSR Sl. No.
2007/NS
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
SUB-HEAD-7
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
TUBE WELL AND TUBE WELL PUMPS
7.1 BORING PART
7.1.1 Drilling with caylex/RC/DC rig having 16"/18" dia bore size in all kind of
strata except hard rock.
mtr
7.2 SUPPLY AND FIXING
7.2.1 8" dia UPVC plain pipe of jain/ Finolex make or equivalent
mtr
7.2.2 8" dia UPVC slotted pipe of jain/Finolex make or equivalent
mtr
7.3 Tubewell Fittings
L.S.
7.4 Pea Gravel
L.S.
7.5 Development of tubewell with heavey duty air compressor.
L.S.
7.6 Supply of KSB make submersible pumping set with 7.5 HP with motor 6
stage pump suitable for 400 LPM at 56 mtr. Head respectively. Three
phase
each
7.7 2 1/2" dia GI column pipe of Jindal or equivalent B class including heavy
sockets.
mtr
7.8 Cable 4 sq.mm.
mtr
7.9 Panel Board for Submersible pump fitted with L&T make or equipvalent
DOL starter ammeter, voltmeter single phase preventer, standard/ indocop or equpvalent make MCB on / off switch pump button duly wired and
made out of 16/18 SWG shet.
each
7.10 2 1/2" dia fitting
1.s
7.11 Lowreing of pump set.
each
7.12 Transportation of equipment and material.
1.s
TOTAL OF SUB-HEAD-7
BOQ
100
1089.00
108900.00
42
48
1
1
1
1770.00
1906.00
8168.00
54450.00
88481.00
74340.00
91488.00
8168.00
54450.00
88481.00
1
38796.00
38796.00
60
80
749.00
123.00
44940.00
9840.00
1
1
1
1
7487.00
2042.00
3403.00
47644.00
7487.00
2042.00
3403.00
47644.00
579979.00
0.00
18
PLUMBING
ELECTRICAL WORKS
(Page No. 1 to 28)
ABSTRACT OF COST - ELECTRICAL WORKS
AMOUNT (Rs.)
SL. No.
DESCRIPTION
DSR Item
1
SUB-HEAD -I , WIRING
2
SUB-HEAD -II ,MCBS &DISTRIBUTION BOARDS
3
2543111.00
0.00
150,954.00
947,655.00
SUB-HEAD -III ,EARTHING
46,824.00
0.00
4
SUB-HEAD -IV ,LIGHTNING
141,992.00
0.00
5
SUB-HEAD -V,FITTINGS AND ACCESSORIES
62,297.00
2,813,375.00
6
SUB-HEAD -VI ,LAN SYSTEM
0.00
1,081,100.00
7
SUB-HEAD -VII ,STREET LIGHTING
35,290.00
365,215.00
8
SUB-HEAD -VIII ,DG WORKS
0.00
1,800,000.00
107,291.00
1,725,549.00
3,087,759.00
8,732,894.00
9
SUB-HEAD -IX ,LT PANELS, LT CABLES, TERMINATION,EARTHING &
MISC WORKS
TOTAL
GRAND TOTAL
BOQ
Non Schedule Item
11,820,653.00
1
ABST ELECT
SCHOOL OF PHYSICAL SCIENCES AT AIZAWL, MIZORAM
BILL OF QUANTITY : ELECTRICAL WORKS
DSR 2007/N Sl. No.
S
SUB-HEAD -I
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
WIRING
1.10
1.1
Wiring for light point/fan point/exhaust fan point/call bell point with
1.5 Sq.mm FR PVC insulated, copper conductor, single core
cable in surface/recessed PVC conduit, with modular switch,
modular plate, suitable GI box and earthing the point with 1.5
Sq.mm FR PVC insulated copper conductor single core cable
etc. as required.
1.10.3
1.11
1.1.1
1.2
Group-C
Wiring for twin control light point with 1.5 Sq.mm FR PVC
insulated, copper
conductor, single core
cable in
surface/recessed PVC conduit, 2 way modular switch, modular
plate, suitable GI box and earthing the point with 1.5 Sq.mm FR
PVC insulated copper conductor single core cable etc. as
required.
Point
Point
1050
18
426.00
453.00
447300.00
8154.00
1.12
1.3
Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated,
copper conductor, single core cable in surface/recessed PVC
conduit alongwith 1 No. 4 Sq.mm FR PVC insulated copper
conductor single core cable for loop earthing as required.
Mtr
4500
97.00
436500.00
1.13
1.4
Wiring for light/power plug with 4x4 Sq.mm FR PVC insulated,
copper conductor, single core cable in surface/recessed PVC
conduit alongwith 2 Nos. 4 Sq.mm FR PVC insulated copper
conductor single core cable for loop earthing as required.
Mtr
500
149.00
74500.00
1.14
1.5
Wiring for circuit/sub main wiring alongwith earth wire with the
following sizes of PVC insulated copper conductor, single core
cable in surface/recessed PVC conduit as required.
1.14.1
a)
2 x 1.5 Sqmm + 1 x 1.5 Sq.mm (For circuit wiring).
Mtr
10000
71.00
710000.00
BOQ
NS items
2
ELECTRICAL
DSR 2007/N
S
Sl. No.
1.14.4
b)
1.14.5
1.14.10
1.14.11
1.14.12
1.21
c)
d)
e)
e)
6
1.21.1
1.21.2
1.31
a)
b)
1.6
1.32
1.7
Supplying & fixing suitable size GI box of with modular plate and
cover in front on surface or in recess including providing & fixing 6
pin 15/16 Amp. Modular socket outlet and 15/16 Amp. Modular
switch, connections, painting etc. as required.
1.24
1.8
1.24.3
1.24.4
1.24.6
1.24.7
1.25
a)
b)
c)
d)
1.9
1.26
1.10
Supplying & fixing following modular switch/socket on the existing
modular plate & switch box including connections but excluding
modular plate etc. as required.
16 Amp. Switch
3 Pin 5/6 Amp. Socket outlet
Telephone socket outlet
TV antenna socket outlet
Supplying & fixing stepped type electronic fan regulator on the
existing modular plate switch box including connections but
excluding modular plate etc. as required.
Supplying & fixing modular blanking plate on the existing modular
plate and switch box excluding modular plate as required.
BOQ
Rate (Rs.)
Description of item
Unit
2 x 6 Sqmm +1x 6 Sq.mm (For submain & 20 A power socket
wiring)
2 x 10 Sqmm +1x10 Sq.mm (For submain )
4 x 6 Sqmm +2 x 6 Sq.mm (For submain wiring)
4 x 10 Sqmm +2 x 10 Sq.mm (For submain wiring)
4 x 16 Sqmm +2 x 16 Sq.mm (For submain wiring)
Supplying and laying of the following of PVC conduit alongwith
accessoris in surface/recess including cutting the wall and
making good the same in case of recessed conduit as required.
(For telephone & TV wiring).
20mm
25mm
Supplying & fixing suitable size GI box of with modular plate and
cover in front on surface or in recess including providing & fixing 3
pin 5/6 Amp. Modular socket outlet and 5/6 Amp. Modular switch,
connections, painting etc. as required.
3
Qty
DSR
NS
Amount (Rs.)
DSR items
Mtr
1400
127.00
177800.00
Mtr
Mtr
Mtr
Mtr
600
950
550
100
171.00
207.00
294.00
487.00
102600.00
196650.00
161700.00
48700.00
Mtr
Mtr
Each
300
200
56
41.00
47.00
160.00
12300.00
9400.00
8960.00
Each
81
214.00
17334.00
Each
Each
Each
Each
Each
96
288
47
4
226
67.00
64.00
61.00
60.00
247.00
6432.00
18432.00
2867.00
240.00
55822.00
Each
140
20.00
2800.00
NS items
ELECTRICAL
DSR 2007/N
S
Sl. No.
1.27
1.11
1.27.1
1.27.4
1.18
a)
b)
1.12
1.18.2
1.18.3
1.19
a)
b)
1.13
BOQ
Rate (Rs.)
Description of item
Unit
Supplying & fixing following size/modules, GI box alongwith
modular base & cover plate for modular switches in recess etc.
as required.
1 or 2 Module (75 mm x 75 mm)
8 Module (125 mm x 125 mm)
Supplying and drawing following PAIR, 0.5 Sq.mm FR PVC
insulated copper conductor, unarmoured telephone cable in the
existing surface/recessed steel/PVC conduit as required.
2- Pair
4- Pair
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor shielded with fine tinned copper braid and
protected with PVC sheath in the existing surface/recessed
steel/PVC conduit as required.
TOTAL OF SUB-HEAD - I
4
Qty
DSR
NS
Amount (Rs.)
DSR items
Each
Each
51
96
88.00
177.00
4488.00
16992.00
Mtr
Mtr
Mtr
900
200
80
19.00
21.00
23.00
17100.00
4200.00
1840.00
NS items
2543111.00
ELECTRICAL
DSR 2007/N Sl. No.
Description of item
S
SUB-HEAD-II
MCB DISTRIBUTION BOARD
Rate (Rs.)
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
2.51
2.1
Supplying & fixing 5 Amps. to 32 Amps. Rating, 240 Volts, "B"
series, miniature circuit breaker suitable for lighting and other
loads of following poles in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
2.51.1
2.51.3
2.32
a)
b)
2.2
Single Pole
Triple Polel
Supplying and fixing of following way, single pole and neutral,
sheet steel, MCB distribution board consumer unit, 240 Volts on
surface/recess, complete with tinned copper bus bar, neutral bus
bar, earth bar, din bar, hinged front acrylic cover for the MCB
knobs, detachable gland plate, inter-connections, phosphatized
and powder painted including earthing etc. as required. (But
without MCB/RCCB/Isolator).
Each
Each
450
10
86.00
273.00
38700.00
2730.00
2.32.1
2.32.2
2.56
a)
b)
2.3
Each
Each
1
26
559.00
654.00
559.00
17004.00
2.56.1
a)
2 + 4Way
2 + 8 Way
Supplying and fixing of following rating, double pole, (single phase
& neutral), 240 Volts, residual current circuit breaker (RCCB),
having a sensitivity current upto 300 mA in the existing MCB DB
complete with connections, testing and commissioning as
required.
25 amps.
Each
18
949.00
17082.00
2.56.2
2.57
b)
2.4
40 amps.
Supplying and fixing of following rating, four pole, (three phase &
neutral) 415 Volts, residual current circuit breaker (RCCB),
having a sensitivity current upto 300 mA in the existing MCB DB
complete with connections, testing and commissioning as
required.
Each
11
1007.00
11077.00
2.57.1
2.57.2
a)
b)
25 Amps.
40 Amps.
Each
Each
15
7
1168.00
1208.00
17520.00
8456.00
2.57.3
c)
63 Amps.
Each
3
1426.00
4278.00
BOQ
5
NS items
ELECTRICAL
DSR 2007/N
S
Sl. No.
2.33
2.5
Supplying and fixing following way, three pole and neutral, sheet
steel, MCB distribution board consumer unit, 415 Volts on
surface/recess, complete with tinned copper bus bar, neutral bus
bar, earth bar, din bar, hinged front acrylic cover for the MCB
knobs, detachable gland plate, inter-connections, phosphatized
and powder painted including earthing etc. as required. (But
without MCB/RCCB/Isolator).
2.33.1
a)
4 Way
Each
25
820.00
20500.00
2.33.2
2.53
b)
2.6
Each
Each
2
105
959.00
2.00
1918.00
210.00
2.62
2.7
Each
21
520.00
10920.00
NS
2.8
6 Way
Supplying & fixing single pole blanking plate in the existing MCB
DB complete etc. as required.
Supplying and fixing 20 Amps. 240 Volts, SPN industrial type
socket outlet, with 2 pole and earth, metal enclosed plug top
alogwith 32Amps., C-series, SP MCB, in sheet steel enclosure,
on surface or in recess, with chaied metal cover for the socket,
outlet, and complete with connections, testing and commissioning
etc. as required.
Supply, installation, testing & commissioning of LT Main
Distribution Board suitable for operation on 415V, 50 Hz, 3
phase, 4 wire, AC system capable of withstanding fault level of
35 KA, 415 volts. The panel shall be indoor, free floor standing,
metal clad, powder coated, dust & vermin proof, compartment
type enclosure of IP-42 & fabricated out of 2mm thick CRCA
sheet with necessary electrolytic alum. bus-bar and cable alleyes
and foundation channel of 100x50x6mm. The incoming and
outgoing feeders shall be accomodated in a multi-tier
arrangement, painting, earthing, sign writing, numbering etc.
complete as per specifications & single line diagram and
comprising the following switchgear and accessories: (Shop
drawing to be got approved prior to execution of work).
MDB (NORMAL) at ground floor.
Each
3
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
160875.00
Amount (Rs.)
DSR items
NS items
482625.00
INCOMER
BOQ
6
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
One (1) Set160 A, 4 Pole, 415V, MCCB having braking
capacity 35 KA with adjustable trip releases.
1 No. Ammeter of suitable range (digital type) with suitable CTs.
1 No. - Voltmeter 0-500V (digital type)
1 Set - Phase indicating lamps.
a)
b)
c)
NS
2.9
1 Set - HRC backup fuses.
BUS-BAR
1 Set -200A TPN electrolytic aluminium bus bar suitable for
35KA fault level covered with colour coded PVC sleeves.
OUTGOING
Three (3) Nos. 63A, 3 Pole MCCB, having breaking capacity of
25 KA
Seven (7) Nos. 40A, 3 Pole MCCB, having breaking capacity of
25KA
Four (4) Nos. 32A, 3 Pole MCCB, having breaking capacity of
25KA
Supply, installation, testing & commissioning of LT Main
Distribution Board suitable for operation on 415V, 50 Hz, 3
phase, 4 wire, AC system capable of withstanding fault level of
35 KA, 415 volts. The panel shall be indoor, free floor standing,
metal clad, powder coated, dust & vermin proof, compartment
type enclosure of IP-42 & fabricated out of 2mm thick CRCA
sheet with necessary electrolytic alum. bus-bar and cable alleyes
and foundation channel of 100x50x6mm. The incoming and
outgoing feeders shall be accomodated in a multi-tier
arrangement, painting, earthing, sign writing, numbering etc.
complete as per specifications & single line diagram and
comprising the following switchgear and accessories: (Shop
drawing to be got approved prior to execution of work).
MDB (ESSENTIAL) at Entry level
Each
3
155010.00
465030.00
INCOMER
One (1) Set160 A, 4 Pole, 415V, MCCB having braking
capacity 35 KA with adjustable trip releases.
BOQ
7
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
1 No. Ammeter of suitable range (digital type) with suitable CTs.
a)
b)
c)
BOQ
1 No. - Voltmeter 0-500V (digital type)
1 Set - Phase indicating lamps.
1 Set - HRC backup fuses.
BUS-BAR
1 Set -200A TPN electrolytic aluminium bus bar suitable for
35KA fault level covered with colour coded PVC sleeves.
OUTGOING
Three (3) Nos. 63A, 3 Pole MCCB, having breaking capacity of
25 KA
Seven (7) Nos. 40A, 3 Pole MCCB, having breaking capacity of
25KA
Four (4) Nos. 32A, 3 Pole MCCB, having breaking capacity of
25KA
TOTAL OF SUB-HEAD - II
8
150954.00
947655.00
ELECTRICAL
DSR 2007/N Sl. No.
Description of item
Unit
S
SUB-HEAD-III
EARTHING
Earthing
with copper earth plate 600mm x 600mm x 3mm thick
Set
3.6
3.1
Rate (Rs.)
Qty
DSR
NS
Amount (Rs.)
DSR items
4
3263.00
13052.00
Set
4
603.00
2412.00
Mtr
20
494.00
9880.00
Mtr
60
358.00
21480.00
46824.00
NS items
i/c. accessories & providing masonary enclosure with cover
plate having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt) complete etc. as required.
3.7
3.2
3.13
3.3
3.4
3.17
BOQ
a)
Extra for using salt and charcoal for GI or copper plate earth
electrode as required
Providing and fixing 25mm x5mm copper strips in 40mm dia GI
pipe from earth electrode as required.
Providing and fixing of following sizes copper strips on surface or
in recess for connection etc. as required
25mm x 5mm
TOTAL OF SUB-HEAD - III
9
ELECTRICAL
DSR 2007/N Sl. No.
S
SUB-HEAD-IV
LIGHTING
BOQ
4.1
4.1
4.4
4.2
4.5
4.3
4.6
4.4
4.11
4.5
4.13
4.6
3.6
4.7
3.7
4.8
Rate (Rs.)
Description of item
Unit
Providing & fixing of lightning conductor finial, made of 25 mm dia Each
300 mm long, copper tube, having single prong at top, with 85
mm dia 6 mm thick copper base plate including holes etc.
complete as required.
Reverting, sweating and soldering of copper/G.I. tape (with Each
another copper/GI tape, base of the finial or any other metallic
object) as required.
Providing and fixing copper tape 20mm x 3mm thick on parapet Metre
or surface of wall for lightning conductor complete as required
(For horizontal run)
Providing and fixing copper tape 20mm x 3mm thick on parapet Metre
or surface of wall for lightning conductor complete as required.
(For vertical run)
Providing and fixing testing joint, made of 20 mm x 3 mm thick Each
copper strip, 125mm long, with 4 nos. of tinned brass bolts, nuts,
check nuts and spring washers etc. complete as required
Providing and laying copper tape 32 mm x 6 mm from earth
electrode directly in ground as required.
Earthing with copper earth plate 600mm x 600mm x 3mm thick
i/c. accessories & providing masonary enclosure with cover
plate having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt) complete etc. as required.
Extra for using salt and charcoal for GI or copper plate earth
electrode as required
TOTAL OF SUB-HEAD - IV
10
Qty
DSR
NS
Amount (Rs.)
DSR items
4
477.00
1908.00
90
56.00
5040.00
400
163.00
65200.00
100
175.00
17500.00
6
108.00
648.00
Metre
Set
60
6
475.00
3263.00
28500.00
19578.00
Set
6
603.00
3618.00
NS items
141992.00
ELECTRICAL
DSR 2007/N Sl. No.
Description of item
Unit
S
SUB-HEAD - V FITTINGS AND ACCESSORIES
Supplying of light fittings complete with all standard accessories
NS
5.1
a)
b)
c)
d)
e)
f)
g)
h)
i)
j)
BOQ
with choke, starter, capacitor etc. as per specifications of the
following type as required.
1X36 watt box type fluorescent light fixture with lamp as per
PHILIPS Cat NO.TMS 021/136 HPF or similar specifications of
other approved makes.
2X36 watt box type fluorescent light fixture with lamp as per
PHILIPS Cat NO.TMS 021/236 HPF or similar specifications of
other approved makes.
1X36 watt fluorescent mirror optics light fixture with lamp as per
Philips Cat NO.TCS 306/136 HPF or similar specifications of
other approved makes.
2X36 watt fluorescent light fixture with lamp as per Philips Cat
NO.TCS 306/236 HPF or similar specifications of other approved
makes.
2X18 watt CFL rectangular ceiling light fixture with lamp as per
PHILIPS Cat.No. FCS 350/218 MI or similar specifications of
other approved makes.
1X18 watt fluorescent mirror light fixture with lamp as per
DECON Cat.No. 04FA 01/ 02 or similar specifications of other
approved makes.
4X18 watt rectangular fluorescent light fixture with lamp as per
DECON Cat.No.03JP or similar specifications of other approved
makes.
25 watt CFL circular decorative ceiling light fixture with lamp
as per PHILIPS Cat.No.Deco Twist Lux BCS 1902 or similar
specifications of other approved makes.
1X70 watt metal halide light fixture with lamp as per DECON
Cat.No.79 PK or similar specifications of other approved makes.
1x60 W GLS bulk head fitting with lamp as per PHILIPS Cat.No.
NXC 101 or similar specifications of other approved makes. .
11
Rate (Rs.)
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Each
28
760.00
21280.00
Each
185
1112.00
205720.00
Each
9
2053.00
18477.00
Each
196
2753.00
539588.00
Each
208
1795.00
373360.00
Each
19
2065.00
39235.00
Each
158
3991.00
630578.00
Each
50
1226.00
61300.00
Each
24
3306.00
79344.00
Each
18
715.00
12870.00
ELECTRICAL
DSR 2007/N
S
Sl. No.
`
k)
`
l)
Rate (Rs.)
m)
BOQ
Description of item
Unit
1X60W GLS DECORATIVE WALL LAMP SET WITH LAMP
Each
(PAINT FINISH) VIDE DECON CAT. NO.0555 or similar
specifications of other approved makes.
1X13W CFL DRUM LIGHT SET WITH LAMP (PAINT FINISH)
Each
VIDE DECON CAT. NO.03 TY or similar specifications of other
approved makes.
1X36 watt fluorescent street light fixture with lamp as per Philips Each
Cat NO.HGS 120/136 HPF with GI Bend pipe as required.
Supplying of approved make ceiling fan of double ball bearing of
the following sizes with its all accessories suitable for operation
on 230V single phase, 50 Hz, AC supply complete as per
specifications as required.
1200mm sweep
Supplying,installation, testing and commissioning of approved
make wall mounting air circulator of 600 mm size with all its
accessories suitable for operation on 230V single phase, 50 Hz,
AC supply complete as per specifications as required.
Qty
DSR
NS
Amount (Rs.)
DSR items
68
791.00
53788.00
15
1102.00
16530.00
47
1867.00
87749.00
Each
Each
226
6
1697.00
8427.00
383522.00
50562.00
Each
Each
Each
16
60
76
2587.00
3048.00
200.00
41392.00
182880.00
15200.00
NS
5.2
NS
a)
5.3
NS
5.4
NS
a)
b)
5.5
1.41
5.6
Installation, testing and commissioning of prewired fluorescent
fitting/compact fluorescent fitting of all types, complete with all
accessories and tubes etc. directly on ceiling/wall including
connection 1.5 Sqmm FR PVC insulated, copper conductor,
single core cable and earthing etc. as required.
Each
650
43.00
27950.00
1.35
5.7
Erection of wall bracket/ceiling fittings of all sizes and shapes
containing upto two GLS lamps per fitting, complete with all
accessories including connection etc. as required.
Each
86
19.00
1634.00
Supplying of 230V (nominal voltage) exhaust fan with its all
accessories complete as per specifications as required of
following size:
305mm sweep1400 RPM (Heavy duty)
380mm sweep1400 RPM (Heavy duty)
Supplying of louvers for the above exaust fans etc. as required.
12
NS items
ELECTRICAL
DSR 2007/N
S
Sl. No.
1.44
5.8
1.52
5.9
1.54
5.10
1.34
5.11
1.38
5.12
BOQ
Rate (Rs.)
Description of item
Unit
Installation, testing and commissioning of ceiling fan, including
wiring the down rods of standard lenght(upto 30 cm) with 1.5
Sqmm FR PVC insulated, copper conductor, single core cable
etc. as required.
Installation of exhaust fan upto 450mm sweep in the existing
opening, including making the hole to suit the size of the above
fan, making good the damage, connections, testing and
commissioning etc. as required.
Extra for fixing of louvers/shutters complete with frame for
exhaust fans of all sizes.
Supplying and fixing brass batten/angle holder including
connection etc. as required.
Supplying and fixing call bell/buzzer suitable for D.C/A.C single
phase, 230 Volts, complete as required.
TOTAL OF SUB-HEAD - V
13
Qty
DSR
NS
Amount (Rs.)
DSR items
Each
187
45.00
8415.00
Each
76
223.00
16948.00
Each
76
65.00
4940.00
Each
36
33.00
1188.00
Each
47
26.00
1222.00
62297.00
NS items
2813375.00
ELECTRICAL
DSR 2007/N Sl. No.
Description of item
S
SUB-HEAD-VI
LAN SYSTEM
NS
NS
NS
6.1
1
2
3
4
5
6
7
8
9
6.2
1
2
3
6.3
1
2
3
4
5
6
7
8
BOQ
Rate (Rs.)
Unit
Supply & installation of following Component (CAT-6)
CAT-6 UTP Cable (305Mt. Box)
R&M CAT-6 Information Outlet
Singlex Face Plate British Style
CAT-6 Patch Cord 3FT
CAT-6 Patch Cord 7FT
CAT-6 8-Port Patch Panel
CAT-6 16-Port Patch Panel
CAT-6 24-Port Patch Panel
Gang Box
Supply & installation of following Component (Network
Switch)
10/100MBPS 8- Port Managed Switch CISCO make
10/100MBPS 16- Port Managed Switch CISCO make
10/100MBPS 24- Port Managed Switch CISCO make
Supply & installation of Network Enclosure
22 U 600 X 600 Floor Standing Rack with Door and Floor
Standing Side Panls (COMRACK)
Cable Manager
Hardware Front Panel (Pk of 10)
III: Services
Supplying & Laying of 1" PVC Channel
Laying of CAT-6 UTP Cable
Testing & commissioning of CAT-6 UTP Cable, Ferruling,
Termination of UTP CAT-6 cable on information Outlets & Patch
panel side, Final testing, Dressing & Labeling of data nodes &
Documentation
Penta Testing with Documentation & Certification
TOTAL OF SUB-HEAD - VI
14
Qty
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
Nos.
10
100
100
100
100
1
4
2
100
Mts.
Mts.
Mts.
DSR
NS
Amount (Rs.)
DSR items
NS items
6350.00
185.00
90.00
175.00
210.00
4500.00
5000.00
5300.00
30.00
63500.00
18500.00
9000.00
17500.00
21000.00
4500.00
20000.00
10600.00
3000.00
1
4
2
38500.00
80000.00
175000.00
38500.00
320000.00
350000.00
Nos.
7
14500.00
101500.00
Nos.
Nos.
100
10
175.00
125.00
17500.00
1250.00
Mts.
Mts.
Nos.
500
3000
150
24.00
5.50
275.00
12000.00
16500.00
41250.00
Nos.
100
150.00
15000.00
1081100.00
ELECTRICAL
DSR 2007/N Sl. No.
Description of item
S
SUB-HEAD-VII STREET LIGHTING
BOQ
Rate (Rs.)
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
NS
7.1
Farbrication, supplying, installation, testing & commissioning of
65mm dia, class-B GI pipe, 5 mtr long alongwith MS base plate
300mm x 300mm x 5mm, reducer/nipple etc. complete
inclusidng cement concrete foundation 1:2:4 ( 1 cement :2
coarse sand :4 graded stone aggr. 40mm nominal size) with
cement concrete collar of size 0.40m dia x 0.5m height alongwith
excavation, refilling and pinting etc. complete as per
specifications ,drawing as required.
Each
15
4500.00
67500.00
NS
7.2
Mtr
45
200.00
9000.00
NS
7.3
Providing & fixing GI pipe bend of 32mm dia for cable entry
including fixing alongwith pole/ground with clamp in
concrete/ground etc. complete as required.
Farbrication, supplying, installation, testing & commissioning of
weather proof box made out of hot moulded SMC sheet of size
333mm x 233mm x 120mm complete with 4 Nos. electrolytic
aluminium bus-bar of 63 Amps. with porcelain base and suitable
din bar including supplying and fixing one No. 6 A SPMCB
complete with connections & inter-connections etc. as required.
Each
15
821.00
12315.00
NS
7.4
Each
15
3960.00
59400.00
Supplying, installation, testing & commissioning of 70W HPSV
post top lantern with spherical acrylic cover & lamp as per Philips
Cat. No. SPC 106/ 70(I) HPF or similar specifications of other
approved make with all accessories complete as required.
15
ELECTRICAL
DSR 2007/N
S
NS
Rate (Rs.)
Sl. No.
7.5
Description of item
Unit
FEEDER PILLARS & CABLES:
STREET LIGHT DISTIBUTION FEEDER PILLAR:DFP-SL
Fabricating, Supplying, installing, testing and commissioning of
outdoor type feeder pillar suitable for operation on 415V, 50 Hz,
3 phase, 4 wire, AC system capable of withstanding fault level of
35KA. The pillar shall be dust & vermin proof, weather proof,
metal clad, powder coated enclosure having degree of protection
not less than IP-52, fabricated with 14 SWG thick CRCA sheet
with necessary electrolytic aluminium bus bar, connections, interconnections, internal wiring, gland plates, bottom entry of
incoming & outgoing cables as per site requirement, painting,
earthing, sign writing, foundation channel 50x50x6mm with legs of
750mm height to be welded at each corner of the frame, out of
the length 450mm shall be grouted in ground with cement
concrete foundation 1:3:6 (1 cement: 3 coase sand: 6 graded
stone aggr. of 20mm nominal size) and 300mm shall be above
the ground (finished level) including excavation, refilling and
painting etc. complete as per specifications ,drawing as required
and comprising the following switchgear components and
accessories:
Set
Qty
1
DSR
NS
52700.00
Amount (Rs.)
DSR items
NS items
52700.00
INCOMER:
1 No. 63Amps., 415V, 4-pole MCCB, 25 KA ( Microprocessors
type release with inbuilt O/L , S/C & E/F), Ics=Icu, Ui=1000V.
BUS-BAR:
4 strips, 200Amps. Capacity electrolytic aluminium bus-bar
covered with colour coded sleeves.
OUTGOING:
2 Nos., 32Amps., 415V, 3P MCCB,(Thermomagnetic- fixed type
with inbuilt O/L , S/C) 25KA
1 set Digital Timer Circuit (24 hours) with 63Amps. 415V, 4 pole
power contactor, change over switch -1 NO + 1 NC including all
accessories & connections etc. alongwith by-pass arrangement
complete as required.
BOQ
16
ELECTRICAL
DSR 2007/N
S
Sl. No.
NS
7.6
Supplying and laying in ground or on surface or in existing pipe as
per CPWD specifications of PVC insulated and PVC sheathed
armoured aluminium conductor cable of 1.1 KV grade
conforming to IS:1554 (Part-I) of the following size:
a)
b)
7.7
4.0C x 16 Sqmm
4.0C x 10 Sqmm
Supplying & making end termination with brass compression
glands and aluminum lugs for the following sizes of 1.1KV grade
PVC aluminium conductor armoured cable as required.
Mtr
Mtr
100
500
b)
c)
7.8
4.0C x 10 Sqmm
4.0C x 16 Sqmm
Supply & laying of following sizes of hume pipes including collars
for road crossing, paved areas etc. including jointing with stiff
mixture of cement mortar in proportion of 1:2, digging the trench,
back filling etc. complete in all respects as per direction of
Engineer-in- charge.
100mm dia
Set
Set
30
2
Mtr
10
Mtr
Set
75
2
43.00
1585.00
3225.00
3170.00
Set
2
603.00
1206.00
Mtr
6
218.00
1308.00
4.1.32
4.1.33
NS
Rate (Rs.)
a)
SR
7.9
1.17.12
3.5
a)
7.10
3.7
7.11
3.14
7.12
BOQ
Description of item
Unit
WIRING & EARTHING:
Supplying & drawing of following sizes of PVC insulated copper
conductor single core cable in the existing surface /recess
PVC/steel conduit as required. (For wiring of light fitting from
junction box)
3 X 2.5 Sqmm (1Phase+1Neutral+1Earth)
Earthing with GI earth plate 600mm x 600mm x 3mm thick i/c.
accessories & providing masonary enclosure with cover plate
having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt) complete etc. as required.
Extra for using salt and charcoal for GI or copper plate earth
electrode as required
Providing and fixing 25mm x 5mm GI strips in 40mm dia GI pipe
from earth electrode as required.
17
Qty
DSR
NS
Amount (Rs.)
DSR items
308.00
262.00
104.00
196.00
NS items
30800.00
131000.00
3120.00
392.00
250.00
2500.00
ELECTRICAL
DSR 2007/N
S
Sl. No.
SR
7.13
3.18
3.1
a)
7.14
3.3
7.15
3.15
7.16
3.21
7.17
BOQ
Rate (Rs.)
Description of item
Unit
Providing and fixing of following size GI strip on surface or in
recess for connection etc. as required
25mm x 5mm
Earthing with GI earth pipe 4.5m long x 40mm dia including
accessories & providing masonary enclosure with cover plate
having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt) complete etc. as required.
Extra for using salt and charcoal for GI pipe earth electrode as
required
Providing & fixing earth connections from earth electrode with 6
SWG GI wire in 15mm dia GI pipe from earth electrode as
required.
Providing & fixing 6 SWG dia GI wire on surface/inrecess for
loop earthing alongwith the existing surface/recess conduit
submain wiring/ cable as required.
TOTAL OF SUB-HEAD - VII
18
Qty
DSR
NS
Amount (Rs.)
DSR items
Mtr
Set
10
4
66.00
1496.00
660.00
5984.00
Set
4
475.00
1900.00
Mtr
15
86.00
1290.00
Mtr
1185
11.00
13035.00
35290.00
NS items
365215.00
ELECTRICAL
DSR 2007/N Sl. No.
S
SUB-HEAD- VIII
NS
8.1
i)
ii)
BOQ
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
DG SET
SILENT TYPE D.G SET:
Supply, installation, testing and commissioning of factory
assembled and tested, radiator cooling, Turbo charged, battery
start, Silent Type Diesel Engine- Alternator set capable of
generating power at full load of 200KVA/160KW (at site
conditions) at 0.8 power factor, 415 Volts, 3 phase, 50 Hz, AC,
alongwith engine control panel as well as electrical control panel,
sound proof acoustic enclosure, common base frame,
foundation, standard fittings and accessories complete as per
specifications in all respects, broadly, comprising the following
components:
DIESEL ENGINE:
Radiater coolled, diesel engine capable of delivering suitable
BHP at 1500 RPM under NTP conditions, vertical, totally
enclosed, 24 volts DC electric start arrangement compression
ignition, electronic governing system, silencers, 4 stroke- multi
cylinder, design to run continuously conforming to IS-10000, BS5514, ISO-3046 standards ,capable of taking 10% over loading
for one hours after 12 hours of continuous operation complete
with all fittings & accessories comprising the following:
Set
1
1800000.00
1800000.00
Dry type air-filter, exhaust silencer, expansion bellow, Lub.oil filte
Lub.oil cooler, fuel filter, radiator with pusher type fan and
mountings, air-to-air charge air cooler, flywheel with starter ring,
SAE 1 flywheel housing and flywheel suitable for SAE 14 disc
coupling for close coupling of single bearing alternator, exhaust
gas turbo-charger, water seperator and mud filter, engine safety
arrangements against low lub oil pressure, high water temperatur
and engine over-speed, and other accessories as required.
19
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
iii)
iv)
v)
vi)
vii)
viii)
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
24 Volts D.C. electrical start system complete with starting
arrangement, sealed maintenance free (SMF) starting batteries
of suitable capacity with leads, trickle/boost battery charger set
with instruments & indication arrangements and other
accessories
In line mono-block fuel injection pump with electronic governig
system and fuel feed pump with accessories.
ENGINE CONTROL PANEL - This control panel consists of
ON/OFF START keys, Lub.oil pressure gauge, Coolent
temperature gauge, D.C. Ammeter, D.C. Voltmeter, electronic
Hour- meter etc. as required.
BASE FRAME - Common base frame of required size for
mounting of Engine-Alternator set fabricated with MS channel as
per manufacturer's recommendations and vibration damping
arrangement with cushy foot mounting includings including
painting etc. as required.
FOUNDATION- Providing and making C.C. (1:2:4) foundation
including edge protection with painted MS angle 50x50x6mm and
plastering etc. The foundation shall be suitable for installation of
200 KVA/160 KW diesel engine- alternator set, starting batteries
and control panel etc.
FUEL TANK & FUEL PIPE - Supplying and installation of welded
steel day tank to hold a total quantity suitable for 12 hours
operation, complete with fuel level indicator, inlet and outlet pipes
with strainers, internal piping arrangement and finished painting
etc. Supplying and laying B-class GI pipe of suitable size to
serve as fuel pipe from fuel tank to engine including necessary
clamps supports, valves and braided flexible connections etc as
required.
20
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
Description of item
Unit
ix)
EXHAUST PIPE- Supplying and fixing of suitable size(as per
manufacturer's recommendations) of MS pipe -B class
conforming to IS-3589 for fume-exhaust with suitable supporting
arangement, at suitable distance all along the full length from
generator to 2m above the sub-station including cutting, jointing,
welding, mineral wool insulation ,aluminium cladding and all other
accessories like flanges, flexible coupling, bends, nuts and bolts,
canopy and making masonary opening in the wall for exhaust
pipe & finishing the same as required.
x)
COUPLING WITH COUPLING GUARDS - Providing 1 No.
coupling as per manufacturer's recommendation to directly
couple the engine with alternator. The coupling should have
design to transmit power with minimum loses and absorbs jerks.
xi)
Accoustic and weather proof enclosure with arrangement for
fresh air intake for cooling of the engine & alternator , extraction ,
discharging hot air to the atmosphere as required.
xii)
First fill of fuel oil in the day tank, engine test certificate, engine
maintenance manual with the list of spare parts.
ALTERNATOR (BRUSHLESS):
3 Phase, 4 wire, star connected, 415V, 50 Hz, 1500 RPM, self
regulated type suitable to generate 200KVA/160KW at 0.8 pf
(lag). The insulation class of windings shall be H. The voltage
regulation shall be in the range of +/- 1.0% from full load to No
load and from Hot to cold and unity and 0.8 pf with 4% speedregulation. Alternator should be suitable for being driven by the
above engine at 1500 RPM and compatible with it. The
alternator shall be in SPDP enclosure & shall be of rotating field
type (brushless), synchronous, self excited, self -regulated, floor
mounted with single bearing design, complete with all fittings &
asseccories. The alternator shall confirm to IS 4722/BS-2613 and
should be suitable for tropical conditions.
i)
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
AUTOMATIC MAIN FAILURE (AMF) PANEL:
BOQ
21
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
i)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Cubicle, compartmentalised, AMF panel board capable of
withstanding fault level of 35KA. The panel shall be outdoor type,
dust & vermin proof, free floor standing, metal clad, powder
coated having suitable degree of protection as per latest IS
Code & fabricated out of 2mm thick CRCA sheet with necessary
electrolytic alum. bus bar, connections, inter-connections,
internal wiring, gland plates, ON/OFF indication lamps,
top/bottom entry of incoming and outgoing cables as per site
requirement, painting, earthing, sign writing, numbering, complete
with foundation channeel of 100x50x6mm etc. for trouble free
smooth functioning of 200KVA/160KW, DG set so as to receive
and terminate 1 incomer of 3.5x400 Sqmm armoured PVC
insulated & sheathed aluminium conductor cables from LT main
panel (Normal) & alternator control panel respectively and
provide the provision of 1 No. outgoing cable of the same size to
the Essential panel. The panel, broadly, comprises the following
components/instruments:
2 Sets-400 Amps, 4 pole, adjustable type MCCB with micro
processor based fault releases and equipped with ON/OFF
indication lamps (2 Nos. incomer )
3 Nos. CTs with suitable CT ratio and accuracy class for
instrumentation.
1 No. ditigal type ammeter of suitable range with ASS.
1 No. digital Voltmeter 0-500V with VSS.
1 No. digital frequency meter of suitable capacity.
1 No. digital PF meter of suitable capacity.
1 No. digital KW meter of suitable capacity.
1 No. digital KWH meter of suitable capacity.
3 Nos. phase indicating lamps (RYB).
1 Set HRC type instrument fuses.
2 Nos. 400 Amps, 415V, 4 Pole AC1 duty power contactor.
1 Set - Micro-control based AMF control Logic with complete
mains, alternator & DG automation & protection.
BOQ
22
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
Description of item
Unit
1 Set -400A TPN electrolytic aluminium bus bar suitable for 35
KA fault level covered with heat srinkable colour coded PVC
sleeves.
1 Set - Load manager (kwh + kw)
15 Nos. 10/6 Amps, 230V, 50 Hz, SP MCB for control.
1 No. 4 Pole, 4 wire Auto/manual selector switch.
8 Nos. 230V AC, status indicating lamps.
6 Nos. 230V AC, push buttons: Red + Green for manual
operation.
4 Nos. Auxiliary contactor (2 NO + 2 NC).
1 Set. 24V DC, 8-point Annaunciator with hooter and indications
of :
i) Low lub. Oil pressure, ii) High water temp., iii) Over speed &
iv) Low fuel level.
2 Nos. - 24V DC, 25 Amps., 2 P cranking/stopping relay.
3 Nos. 6/10 Amps., 50 Hz, DP MCB for AMF control
1 Set - Fully automatic 24 V DC battery charger with DC
ammeter, voltmeter, trickle/ boost selector switch, control MCBs,
SMF batteries of suitable capacity, back-up buses, indication
arrangement etc.
TOTAL OF SUB-HEAD - VIII
BOQ
23
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
1800000.00
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
SUB-HEAD - IX
NS
9.1
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
LT PANELS, LT CABLES,
TERMINATION,EARTHING & MISC WORKS
LT PANELS :
Fabrication, Supply, installation, testing and commissioning of
LT panel extendable type suitable for operation on 415V, 50 Hz,
3 phase, 4 wire, AC system capable of withstanding fault level of
50KA, 415 volts. The panel shall be indoor, free floor standing,
metal clad, power coated, dust & vermin proof, compartment
type enclosure of IP-42 & fabricated out of 2mm thick CRCA
sheet with necessary bus bar and cable alleyes and foundation
channel of 100x50x6mm. The incoming and outgoing feeders
shall be accomodated in a multi-tier arrangement, painting,
earting, sign writing, numbering shall be complete with foundation
channel of 100x50x6mm as per specifications & single line
diagram and comprise of the following switchgear and
accessories: (Shop drawing to be got approved by the EngineerIn-Charge prior to fabrication). LT MAIN PANEL-NORMAL
Set
1
259750.00
259750.00
INCOMER
1 No.-630A, 4 Pole MCCB(Ics=Icu,Ui=1000V), having breaking
capacity of 50KA , ( Microprocessors type release with inbuilt O/L
, S/C & E/F)
1 No. Digital type Ammeter with ASS and of suitable range with
CTs of suitable class & capacity.
1 No. Digital type Voltmeter 0-500V with VSS.
1 Set - Phase indicating lamps.
1 Set - HRC backup fuses.
BUS-BAR
1 Set - 630A TPN electrolytic aluminium bus bar for complete
panel suitable for 50KA fault level covered with colour coded PVC
sleeves.
OUTGOING
BOQ
24
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
a)
b)
c)
d)
e)
f)
NS
9.2
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Outgoing MCCBs(having Ics=Icu,Ui=1000V) of the following
rating with adjustable type thermo-magnetic fault releases:
4 Nos.- 160A, 3 Pole MCCB, having breaking capacity of 35KA
(3 Nos. for MDB-N + 1 No.spare)
1 No.- 125A, 3 Pole MCCB, having breaking capacity of 35KA (
1 No.spare)
1 No.- 100A, 3 Pole MCCB, having breaking capacity of 25KA (
1 No.spare)
3 Nos.- 63A, 3 Pole MCCB, having breaking capacity of 25KA
(2Nos. for lifts + 1 No.spare)
2 Nos.- 40A, 3 Pole MCCB, having breaking capacity of 25KA (
2 Nos.spare)
1 Nos.- 400A, 3 Pole MCCB, having breaking capacity of 35KA
Fabrication, Supply, installation, testing and commissioning of
LT panel extendable type suitable for operation on 415V, 50 Hz,
3 phase, 4 wire, AC system capable of withstanding fault level of
35KA, 415 volts. The panel shall be indoor, free floor standing,
metal clad, power coated, dust & vermin proof, compartment
type enclosure of IP-42 & fabricated out of 2mm thick CRCA
sheet with necessary bus bar and cable alleyes and foundation
channel of 100x50x6mm. The incoming and outgoing feeders
shall be accomodated in a multi-tier arrangement, painting,
earting, sign writing, numbering shall be complete with foundation
channel of 100x50x6mm as per specifications & single line
diagram and comprise of the following switchgear and
accessories: (Shop drawing to be got approved by the EngineerIn-Charge prior to fabrication). LT MAIN PANEL-ESSENTIAL
Set
1
233370.00
233370.00
INCOMER
1 No.- 400A, 4 Pole MCCB(Ics=Icu,Ui=1000V), having breaking
capacity of 35KA , ( Microprocessors type release with inbuilt O/L
, S/C & E/F)
1 No. Digital type Ammeter with ASS and of suitable range with
CTs of suitable class & capacity.
BOQ
25
ELECTRICAL
DSR 2007/N
S
Rate (Rs.)
Sl. No.
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
1 No. Digital type Voltmeter 0-500V with VSS.
1 Set - Phase indicating lamps.
1 Set - HRC backup fuses.
BUS-BAR
1 Set - 400A TPN electrolytic aluminium bus bar for complete
panel suitable for 35KA fault level covered with colour coded PVC
sleeves.
OUTGOING
Outgoing MCCBs(having Ics=Icu,Ui=1000V) of the following
rating , (Thermomagnetic- type release with inbuilt O/L , S/C) :
a)
b)
c)
NS
9.3
NS
9.4
a)
b)
c)
d)
d)
BOQ
4 Nos.- 160A, 3 Pole MCCB, having breaking capacity of 35KA
(3 Nos. for MDB-E + 1 No.spare)
2 Nos.- 100A, 3 Pole MCCB, having breaking capacity of 25KA
(1No.for lift + 1 No.spare)
2 Nos.- 63A, 3 Pole MCCB, having breaking capacity of 15KA
(1No.for street light feeder pillar + 1 No.spare)
Supplying, installing, testing & commissioning of wall mounted 63
Amp metal clad SFU alongwith 3nos 63Amp HRC fuse including
fixing with all necessary hardware etc. as required. (In lift room)
Nos.
4
12546.00
50184.00
Mtr
Mtr
Mtr
Mtr
Mtr
25
200
600
80
160
2457.00
1953.00
1006.00
560.00
427.00
61425.00
390600.00
603600.00
44800.00
68320.00
LT CABLES, TERMINATION,EARTHING & MISC.ITEMS:
Supplying of 1.1 KV grade PVC insulated PVC sheathed PVC
aluminium conductor armoured cable conforming to IS:1554
Part-I of the following sizes (Shop drawing of cable layout to be
got aproved by the Engineer-In-Charge prior to procurement).
3.5 C x 400 Sqmm
3.5 C x 300Sqmm
3.5 C x 150 Sqmm
3.5 C x 70 Sqmm
3.5 C x 35 Sqmm
26
ELECTRICAL
DSR 2007/N
S
Sl. No.
NS
9.5
1.3
a)
b)
9.6
1.6
9.7
1.8
9.8
3.3 (Ext)
9.9
4.1
9.10
4.1.21
4.1.23
4.1.26
4.1.30
4.1.31
a)
b)
c)
d)
e)
BOQ
Rate (Rs.)
Description of item
Unit
Supply & laying of following sizes of hume pipes for road
crossing, paved areas etc. including collars and misc. jointing
accessories, digging the trench, back filling etc. complete in all
respects.
100mm dia
150mm dia
Laying of 1 No. PVC insulated and PVC sheathed/XLPE power
cable of 1.1 KV grade of size exceeding 120 Sqmm but not
exceeding 400 sqmm direct in ground including excavation
sand cushioning, protective covering and refilling the trench etc.
as required.
Laying of one number additional PVC insulated and PVC
sheathed/XLPE power cable of 1.1 KV grade of size exceeding
120 sqmm but not exceeding 400 sqmm direct in ground in the
same trench in one tier horizontal formation including excavation,
sand cushioning, protective covering and refilling the trench etc.
as required.
Laying of one No. PVC insulated and PVC sheathed/XLPE
power cable of 1.1 KV grade of size exceeding 25 Sqmm
but
not
exceeding
400
sqmm
in
the
existing
RCC/HumeStoneware/Metal pipe as required.
Supplying & fixing cable route marker with 10cm x 10cm x 5 mm
thick GI plate with inscription thereon, bolted/welded to 35mm x
35mm x 6mm angle iron, 60cm long and fixing the same in
ground as required.
Supplying & making end termination with brass compression
glands and aluminum lugs for following size of PVC insulated and
PVC sheathed/XLPE aluminium contractor cable of 1.1KV grade
as required.
3.5C x 35 Sqmm
3.5C x 70 Sqmm
3.5C x 150 Sqmm
3.5C x 300 Sqmm
3.5 C x 400 Sqmm
27
Qty
DSR
NS
Amount (Rs.)
DSR items
Mtr
Mtr
Mtr
30
20
300
250.00
300.00
97.00
29100.00
Mtr
150
63.00
9450.00
Mtr
35
21.00
735.00
Each
30
157.00
4710.00
Set
Set
Set
Set
Set
4
2
6
4
4
137.00
168.00
278.00
508.00
508.00
548.00
336.00
1668.00
2032.00
2032.00
NS items
7500.00
6000.00
ELECTRICAL
DSR 2007/N
S
Sl. No.
2.71
9.11
3.6
9.12
3.7
9.13
3.14
9.14
3.17
9.15
3.23
Rate (Rs.)
9.16
a)
BOQ
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
Providing & fixing MV Danger Notice plate of 200mm x 150mm,
made of mild steel, atleast 2mm thick, and vitreous enamelled
white on both sides, and with inscription in signal RED colour on
front side as required.
Earthing with copper earth plate 600mm x 600mm x 3mm thick
i/c. accessories, and providing masonary enclosure with cover
plate having locking arrangement and watering pipe etc. (but
without charcoal or coke and salt) etc. as required.
Each
2
68.00
136.00
Set
4
3263.00
13052.00
Extra for using salt and charcoal for GI or copper plate earth
electrode as required
Providing and fixing 25mm x5mm copper strips in 40mm dia GI
pipe from earth electrode, as required.
Providing and fixing 25mm x 5mm copper strips on surface or in
recess for connections etc. as required
Providing and fixing of following sizes copper strips on surface or
in recess for connection etc. as required
50mm x 5mm
TOTAL OF SUB-HEAD -IX
Set
4
603.00
2412.00
Mtr
20
494.00
9880.00
Mtr
50
358.00
17900.00
Mtr
20
665.00
13300.00
28
107291.00
NS items
1725549.00
ELECTRICAL
FIRE FIGHTING & FIRE DETECTION
WORKS
(Page No. 1 to 9)
ABSTRACT OF COST - FIRE FIGHTING & FIRE DETECTION WORKS
AMOUNT (Rs.)
SL. No.
DESCRIPTION
DSR Item
Non Schedule Item
1
TOTAL OF SUB HEAD - I (PUMPS & ACCESSORIES)
0.00
121351.00
2
TOTAL OF SUB HEAD - II (ELECTRICALS)
0.00
104727.00
3
TOTAL OF SUB HEAD - III (PIPING AND ACCESSORIES (HYDRANT
SYSTEM))
0.00
537733.00
4
TOTAL OF SUB HEAD - IV (FIRE EXTINGUISHERS)
0.00
129650.00
5
TOTAL OF SUB HEAD - V (FIRE ALARM SYSTEM)
0.00
197997.00
0.00
1091458.00
TOTAL
GRAND TOTAL
1091458.00
1
ABST FIRE FIGHTING
SCHOOL OF PHYSICAL SCIENCES AT AIZAWL, MIZORAM
BILL OF QUANTITY - FIRE FIGHTING & FIRE DETECTION WORKS
DSR Description of item
2007/ Sl. No.
NS
SUB-HEAD-I PUMPS & ACCESSORIES
NS
NS
1.1
1.2
Rate (Rs.)
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Supplying, installing, testing, & commissioning of electric driven
automatic Terrace pump set consisting of the following.
Horizontally mounted centrifugal end suction type Terrace pump
complete for delivery of 900 ltrs./minute against a total head of 35
metres with bronze impeller complete with Mechanical Seal.
Squirrel cage induction motor suitable for 415 V, 50Hz, AC supply of
12.5 HP rating for the above pump with synchronous speed of 2900
RPM T.E.F.C type such as confirming to IP:55 and flexible coupling and
coupling guard with the pump. Motor shall accept +/- 10% variation in
voltage and +/- 3 % variation in frequency. Motor shall accept +/- 10%
variation in voltage and +/- 3 % variation in frequency.
Common bed plate of fabricated mild steel channel or cast iron type.
Suitable cement concrete pump foundation of 1:2:4 ratio ( 1 cement : 2
fine aggregate : 4 coarse aggregate ) with MS bolts, washers as
required.
Supplying, installing, testing, & commissioning of electric driven
automatic Terrace pressurisation pump set consisting of the following.
Set
1
75167.00
75167.00
Set
1
39702.00
39702.00
Horizontally mounted centrifugal end suction type Jockey pump
complete for delivery of 180 ltrs./minute against a total head of 35
metres with bronze impeller complete with Mechanical Seal.
Squirrel cage induction motor suitable for 415 V, 50Hz, AC supply of 6
HP rating for the above pump with synchronous speed of 2900 RPM
T.E.F.C type such as confirming to IP:55 and flexible coupling and
coupling guard with the pump. Motor shall accept +/- 10% variation in
voltage and +/- 3 % variation in frequency. Motor shall accept +/- 10%
variation in voltage and +/- 3 % variation in frequency.
Common bed plate of fabricated mild steel channel or cast iron type.
Suitable cement concrete pump foundation of 1:2:4 ratio ( 1 cement : 2
fine aggregate : 4 coarse aggregate ) with MS bolts, washers as
required.
BOQ
2
FIRE FIGHTING
DSR 2007/
NS
Sl. No.
NS
1.3
NS
1.4
BOQ
Rate (Rs.)
Description of item
Unit
Supplying, testing, installation & commissioning of pressure switches for
Terrace Pumps
Supplying, testing, installation & commissioning of pressure guages with
mini ball valve and siphon tube.
TOTAL OF SUB-HEAD-I
3
Qty
DSR
NS
Set
2
1522.00
Set
6
573.00
Amount (Rs.)
DSR items
NS items
3044.00
0.00
3438.00
121351.00
FIRE FIGHTING
DSR 2007/ Sl. No.
NS
SUB-HEAD-II ELECTRICALS
NS
2.1
NS
2.2
NS
2.2.1
BOQ
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Fabricating, supplying, erection, testing and commissioning of totally
enclosed cubicle type free standing, floor mounted, compartmentalised,
sectionalised, dust, damp and vermin proof, with suitable natural
ventilation arrangement, front and rear accessible, lockable power cum
control panel, fabricated from 1.6 / 2 mm thick MS sheet ( to give IP 54
protection ) spray painted with approved colour shade, heavy 4 strip
sleeved aluminium / aluminium alloy bus bar, bus bar supports,
interconnecting from busbars to outgoing switches / MCCBs including
earthing the board suitable to accomodate the following including
numbering etc., as required:
Cubical panel as described above with following:
Incoming section : 100 Amps ACB, 3 pole with neutral link 25 KA, 415
V+ 1 No., Digital Voltmeter with phase selection push button = 1 No., 3
Phase indication lamps, instrument fuses and switches, 100 Amp Al.
Bus bar
Outgoing Section:
900 LPM Pump
50 A TP MCCB with neutral link 250 KA 415 V = 1 No.
On / Off indicating Lamp = 1 set.
Suitable fully automatic star delta starter for motor complete with single
phase preventer relay = 1 no.
Ammeter with Phase selection = 1 No.
CT Ratio 250 : 5 = 3 nos
180 LPM Pump
25 A TP MCCB with neutral link 250 KA 415 V = 1 No.
On / Off indicating Lamp = 1 set.
Suitable fully automatic star delta starter for motor complete with single
phase preventer relay = 1 no.
Ammeter with Phase selection = 1 No.
CT Ratio 250 : 5 = 3 nos
Set
1
70467.00
70467.00
Supplying and fixing of one number PVC insulated and PVC sheated
aluminium conductor cable of 1.1 KV grade of size on surface as
required complete with end terminations of aluminium lugs and brass
compression glands.
16 x 3 core
Mtr.
60
220.00
13200.00
4
FIRE FIGHTING
DSR 2007/
NS
Sl. No.
NS
2.3
Providing and laying 2 x 1.5 sq mm PVC insulated and sheathed copper
conductor armoured cable for connecting between Pressure Switches to
Panel including fixing to walls and columns by GI saddles and steel
screws, and fixing by PVC ties and straps and end terminations with
aluminium lugs and brass compression glands complete as required. All
supports shall be at least 0.5 M intervals. Thimbles and ferrules shall be
provided at joints and terminations.
As per
Electrical
SOR
CBTR2255
01
2.4
Fabricating and installing following sizes of perforated MS cable trays
including horizontal and vertical bends, reducers, tess, cross members
and other accessories as required and duly suspended from the ceiling
with MS suspenders and including painting etc. as required.
Rate (Rs.)
2.4.1
BOQ
Description of item
Unit
225 mm width x 50 mm depth x 1.6 mm thickness
TOTAL OF SUB-HEAD-II
Qty
DSR
NS
Mtr.
60
123.00
Mtr.
40
342.00
Amount (Rs.)
DSR items
7380.00
0.00
5
NS items
13680.00
104727.00
FIRE FIGHTING
DSR Description of item
2007/ Sl. No.
NS
SUB-HEAD-III
PIPING AND ACCESSORIES (HYDRANT SYSTEM)
NS
3.1
NS
NS
NS
NS
NS
NS
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.2
NS
3.3
NS
3.4
NS
3.5
BOQ
Rate (Rs.)
Unit
Supplying, laying, jointing and testing of following sizes heavy grade MS
pipe, flanges and fittings such as Bends, Tees, reducers, rubber
insertions and galvanised nuts and bolts, "Heavy Class" confirming to
IS: 1239/Part-I/1974 and Part - II /1979 i/c fixing the pipe on wall / ceiling
/ truss with suitable M.S strip / clamps / bracket and painting with one
coat of anticorosive paint/primer and two coats of synthetic enamal paint
etc. complete as reqd. Rate shall also include cost of hangers and
clamps as required and including all civil breakages and making good
the same.
150 mm dia
100 mm dia
80 mm dia
65 mm dia
50 mm dia
Supplying and fixing single headed gun metal body hydrant valve inlet
complete with 63 mm dia female instantaneous outlet of gun metal
conforming to type "A" of IS:5290-1977 with rubber blank cap, steel
chain, adapter as per CPWD Specification Part - V as required including
6 mm thick Stainless steel Orifice Plate of suitable size as required.
(Threaded parts shall be sealed with "Holdtite").
Providing 63 mm dia 15 M long reinforced rubber lined hose pipe with
external EPDM coating conforming to IS:636-1962 Part- A, with gun
metal male & female coupling wire wound copper wire with the pipe.
Providing short gun metal branch pipe IS marked with 20 mm outlet
bore.
Providing and fixing first aid hose reel full swinging type with 36 M
length x 20 mm dia double rayon braided rubber pipe externally red
coated with ABS plastic shut off nozzle of 6 mm dia. Hose shall be
connected to the Riser through MS ( H ) 25 mm dia pipe complete with
all fittings and ball valve with internal strainer. Rate shall include 25 mm
dia pipe connection from riser to hose reel including all sockets, nipples,
elbows and 25 mm ball valve.
6
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Mtr.
Mtr.
Mtr.
Mtr.
Mtr.
5
120
20
40
40
1652.00
1121.00
782.00
619.00
478.00
8260.00
134520.00
15640.00
24760.00
19120.00
Each
1
6012.00
6012.00
Each
2
2859.00
5718.00
Each
1
1694.00
1694.00
Set
22
8277.00
182094.00
FIRE FIGHTING
DSR 2007/
NS
Sl. No.
NS
3.6
NS
3.7
NS
NS
NS
NS
NS
NS
NS
NS
NS
NS
BOQ
Rate (Rs.)
Description of item
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Providing & fixing weather proof standard hose cabinet ( 1.0 M x 0.45 M
x 0.3 M ) outdoor type suitable for accommodating yard hydrants made
of 2 mm thick MS sheet having central opening glazed door including
necessary locking arrangement, powder coating with P O red paint and
housing 2 Nos. RRL hose pipe, 1 No. branch pipe. The words "Hose
Cabinet" to be painted on the Box. Cost of stand of 40 x 40 x 6 mm thick
MS angle with PCC grouting shall also be included.
Providing & fixing cast iron double flanged type IS marked sluice valve
of the following size complete with bolts, nuts, washers and inserted
rubber gaskets as required:
3.7.1 100 mm dia
3.7.2 80 mm dia
3.7.3 65 mm dia
3.7.4 50 mm dia
3.8
Providing & making drainage provision for the Down commer / Header
with 40 mm dia ball valve as required
3.9
Providing and fixing cast iron IS marked single plate hinged gravity
operated non return valve complete with bolts, nuts, washers and rubber
gasket etc as required :
3.9.1 65 mm dia
3.9.2 50 mm dia
3.10 Providing and fixing of 450 mm dia x 2.0 metre high Air Vessel
fabricated out of 8 mm thick MS sheet complete with dished top and
bottom end, Air Release Valve, tripod type stand, Pressure Guage with
ball valve, drain ball valve of 50 mm dia with 2.0 metre long GI ( H )
piping complete as required.
3.11 Providing and fixing Two Way Fire Brigade Inlet to Down Commer with
Butterfly valve and dual plate spring operated wafer type non return
valve complete in all respects :
3.11.1 100 mm dia NRVs and BVs for 100 mm dia Down Commer
TOTAL OF SUB-HEAD-III
7
Each
1
7441.00
7441.00
Each
Each
Each
Each
6
2
1
1
6093.00
4550.00
4112.00
3297.00
36558.00
9100.00
4112.00
3297.00
Each
5
1114.00
5570.00
Each
Each
1
1
3397.00
2730.00
3397.00
2730.00
Set
1
23810.00
23810.00
Set
4
10975.00
0.00
43900.00
537733.00
FIRE FIGHTING
DSR Description of item
2007/ Sl. No.
NS
SUB-HEAD-IV
FIRE EXTINGUISHERS
NS
4.1
NS
4.2
NS
4.3
Rate (Rs.)
Unit
Providing and fixing with brackets wall ounted Fire Extinguishers as per
details below ;
9 litres water type fire extinguisher IS 940 marked deep drawn cylinder
with internal plastic lining and 60 gms CO2 cartridge, siphon tube,
plunger (spring operated) and discharge tube
5 Kg ABC Extinguisher of stored pressure type with discahrge tube and
pressure guage complete. Bidder shall give 5 years guarantee on
cylinder with gas and powder.
Providing & fixing wall mounted signages consisting of Zinc Sulphide
Photo Luminescent coatings on acrylic sheet. Signages shall be 15 cm x
30 cm and shall consist of Signage on half side and arrow on other half.
Signage shall be any of the following:Exit
DSR
NS
Amount (Rs.)
DSR items
8
NS items
Each
10
1961.00
19610.00
Each
20
3542.00
70840.00
Each
40
980
0.00
TOTAL OF SUB-HEAD-IV
BOQ
Qty
39200.00
129650.00
FIRE FIGHTING
DSR Description of item
2007/ Sl. No.
NS
SUB-HEAD-V
FIRE ALARM SYSTEM
Rate (Rs.)
Unit
Qty
DSR
NS
Amount (Rs.)
DSR items
NS items
Providing, installing, testing and commissioning of the following
complete with junction boxes complete as required.
NS
5.1
NS
5.2
5.3
NS
NS
NS
5.3.1
5.4
5.5
ABS body Manual Call Box fabricated from MS sheet with 5 mm glass.
Hooter cum Speaker with 4 Watt Amplifier and Line Matching
Transformer.
Supplying and fixing of following sizes of MS steel conduit alongwith the
accessories in surface / recess including painting in case of surface
conduit, or cutting the wall and making good the same in case recessed
conduit as required. Exposed conduits shall be fixed by saddles with
base plate after every 500mm distance.
20 mm dia
Supply and drawing following sizes of PVC insulated stranded flexible
copper conductor cable in the existing surface / recessed PVC / steel
conduit / PVC casing and capping complete with thimble and ferrules as
required.
2 x 1.0 sq mm
Providing, fixing, testing and commissioning of 12 Zone Main Fire Alarm
Panel complete with Zone Cards, Power Card, Rectifier, spare Relays as
potential free contact, relay for actuation of hooter in respective floor,
adjustable timer, sealed maintenance free batteries of 7 Ah capacity of
24 volts capable of running for a minimum of 12 hours with battery
charger, LED indications for Fire / Fault Signal of individual unit,
complete as per specifications. Each Floor shall have a seperate relay
for actuation of sounder through tone generator and PA Panel. Panel to
also include 1 x 100 Watt Amplifier with 4 Zone Selector Switch, Power
& Monitor Console and Microphone complete as required.
20
670.00
13400.00
Each
20
446.00
8920.00
Mtr.
1200
69.00
82800.00
Mtr.
1200
45.00
54000.00
Each
1
38877.00
0.00
TOTAL OF SUB-HEAD-V
BOQ
Each
9
38877.00
197997.00
FIRE FIGHTING