S H A PED TO S U P P O R T
YO U R E V ER Y M OV E
The nxt Back Support Series provides a range of back rest models, shapes and contours to provide Posterior, Posterior Lateral and Posterior
Deep Lateral support. The Scapula cut-out shape is designed to provide excellent support and comfort while enhancing the user’s natural
range of motion. For optimal positioning of the pelvis, Pelvic-lumbar support pads can be uniquely positioned to customize the fit for the
user. The wide range of sizes, models and contours provide exceptional support and comfort.
QUICKFIT™ MOUNTING HARDWARE
•
Quick and easy to adjust while client is in the chair
•
50 degrees of angle adjustment
•
5" / 12.7cm of depth adjustment, 2.5" / 6.4cm infront & 2.5" / 6.4cm behind back canes
• KC Models adjust 1.75" / 4.4cm infront & 1.75" / 4.4cm behind back canes
•
Fits metric and imperial tubing including, 1" / 2.5cm, 7/8" / 2.2cm
or 3/4" / 1.9cm back canes without shims
•
Clamps open wide for installation/removal without taking them apart
•
New Quickfit Multi-clamp allows clamp to be installed where a smaller tube
is inserted into a larger tube (ie. 3/4" / 1.9cm inside a 1" / 2.5cm)
•
Fits 3 widths of chair by adding the optional post extension kit
(ie. 16" back fits 16", 17" & 18" chairs)
•
Provides rotation adjustment for pelvic or trunk rotation
•
One hand quick release for easy removal to fold chair or transport
OPTIONAL POST EXTENSION KIT
S TA B I L I T Y, S Y M M E T R Y & S H O U L D E R F R E E D O M
•
nxt Backs, support the Spinal Column within the “Scapula Triangle” which improves
shoulder freedom and head control
•
nxt Backs provide support to the side of the pelvis and thorax to stabilize
the entire spinal column
Upper Section of HA Back adjusts to
support the thorax and position the
laterals for superior trunk support
Lower Section of HA Back
is positioned to control
and support pelvis
Pelvic Positioning Cutout is
positioned at the top of the PSIS
giving space for the users bottom
and optimal positioning
The nxt back support complies with the following crash tests when proper head support is provided by an appropriate head
rest system. Low back supports without a head rest system are not recommended for use in transport in a motor vehicle.
-ISO 16840-4 Wheelchair Seating - part 4: Seating Systems for use in motor vehicles.
-RESNA WC-4:2012 Section 20: Seating Systems for use in motor vehicles.
F E AT U R E S
FIXED HEIGHT BACKS
ACBACK
SCBACK
PCBACK
POSITIONING CUTOUT
• Has
a gentle 3” / 7.6cm
contour that provides
excellent postural support
that is ideal for the active
user who wants style,
comfort and support
• Laterals
a 5” / 12.7cm contour
for optimal midline support
and positioning that is ideal
for users who need mid to
upper thoracic or in-scapula
support and excellent
posterior lateral support
• Has
a deep 7” / 17.8cm
contour for optimal midline
support and positioning with
extra lateral support; ideal
for users who need mid to
upper thoracic or shoulder
height support and excellent
posterior lateral support
ADJUSTABLE
LATERALS
LOW PELVIC
PIVOT POINT
50˚
can be independently bent in for a unique fit
• Breathable,
• 300lbs
• Has
washable spacer fabric cover with “Silverplus” antimicrobial protection
/ 136.1kg weight capacity
VICAIR® BACK
50˚ ANGLE ADJUSTMENT
VCBACK
ONE HAND QUICK RELEASE
• Ideal
for tilt chairs, users with a kyphotic posture or users with the potential for skin
breakdown on their spine
• Adjustable
Vicair ® back cushion has eleven pockets that can be individually accessed to
customize fit for comfort and postural support without requiring a custom back support
• 300lbs
ROTATABLE FOR IDEAL POSITIONING
/ 136.1kg weight capacity
H E I G H T A D J U S TA B L E B A C K S
ACBACK
SCBACK
• 3.5"
/ 8.9cm lateral
contour for excellent
postural support
• Steplessly
• Laterals
/ 12.1cm lateral contour
for optimal midline support
and positioning
• 6"
/ 15.2cm deep lateral
contour for optimal midline
support and positioning
and easily adjusts from 16-20" / 40.6-50.8cm in height
can be independently bent in for a unique fit
• Breathable,
• 300lbs
• 4.75"
PCBACK
washable spacer fabric cover with “Silverplus” antimicrobial protection
/ 136.1kg weight capacity
KCBACK
• 1"
/ 2.5cm gentle lateral contour
• Contour
lateral pads provide additional
postural support & potential for width growth
• Steplessly
and easily adjusts in height
10" model: 8-10.5" / 20-27cm
• 12" model: 9-11.5" / 23-29cm
• 14" model: 10-11.5" / 25-32cm
•
ACCESSORIES
HEADREST
L AT E R A L S U P P O R T S
Wide range of lateral trunk supports
available. Including Fixed or swing
away arm styles with single or dual
pads. Pads are adjustable in angle,
length and position.
Short lateral arm with adjustable single
pad. Available with small or large pad.
The MultiFit headrest
is available in a large
or contoured pad
design that can
be shaped to fit
The headrest
pad is made from
comfortable layered
foam with a removable
washable cover
The MultiFit fixture
has a curved depth
and angle adjustment
feature providing a
wide range of settings
The vertical post can
be set in three different
rotation orientations
and has a latch style
clamp for easy height
adjustment & removal
Adjustable length lateral arm with dual
adjustable pad for fixed arm. Available
with small or large pad.
ADJUSTABLE PELVIC-LUMBAR SUPPORT
Swing away short lateral support arm
with single pad. Shown with optional
quad release lever on swing away.
Available with small or large pad.
Swing away short lateral support arm
with single adjustable pad. Available
with small or large pad.
HEADREST
HARDWARE
ADJUSTABLE
LATERAL SUPPORT
KIDS CONTOUR BACKS
KCBACK
Fixed or swing away
positioning lateral
supports
INTRODUCING THE
To increase contour depth, add the optional
single or dual contour lateral. Contour
lateral is width adjustable for growth.
nxt
ARMADILLO
M U LT I - A D J U S TA B L E P O S T U R A L S U P P O R T
Adjusts 40° anterior & 20° posterior
Width adjustable lateral contours are
interchangeable to make contour higher or lower
Mounting attachments can be adjusted in
width symmetrically or asymmetrically
Optional width adjustable lateral/pelvic supports
Adjusts 30° anterior & 20° posterior
The nxt Armadillo is a fixed height, multi-adjustable postural support back that has a gentle contour and optional lateral and pelvic supports.
The Armadillo back support has a three section modular shell designed to adjust to fit the unique contour of the user’s spine. Designed for
users with kyphosis or other spinal deformities.
WIDTH
HEIGHT
14”
16”
16”
18”
20”
22”
18”
24”
DESCRIPTION
OUTER COVER
The nxt KülFit cushion is a multi-layer
contoured cushion that provides
comfort and immersion for active users
who need a comfortable, light weight
cushion and are at low risk of skin
break down.
The nxt NüFit cushion is a multi-layer
contoured cushion designed for users
who need a comfortable cushion with
good positioning and are at low to
medium risk of skin break down.
WASHABLE – Can be washed if soiled
FLUID PROOF
Air mesh cover for comfort
and low temperatures
Fluid proof easy to wipe clean cover
Steel blue mesh front for
air exchange and style
The BioFit multi-layer design provides
deep immersion and support for
skin protection for users at medium
to high risk of skin break down, by
redistributing pressure over the full
sitting surface of the cushion.
VISCO ELASTIC GEL BEADS
Midnight black front for style
Air mesh cover for comfort
and low temperatures
Metallic silver mesh front
for air exchange and style
TuffTex sides for durability & protection
TuffTex sides for durability & protection
Textured non-skid bottom with loop Velcro & carry strap
INNER COVER
DESIGN
Fluid proof and breathable
Wipes clean between washes
Multi-directional stretch fabric for immersion
Zipper for foam access and protection
Pre-ischial support prevents sliding and provides pelvic support
Moderate abductor/adductor contour for mid-line positioning of the femurs
Radius cut at the rear for sacral support and to match contour of modular back supports
Beveled front edge for foot propellers or users who want to sit with a tight front frame angle or who have tight ham strings
PATENT PENDING
Anatomically shaped SPS (Selectively Perforated Softening) perforations are
anatomically positioned to support the Ischial/sacral area to prevent sliding
and shear and maintain pelvic positioning. Provides immersion and lower
pressures to the bony prominences while supporting surrounding areas that
can take a higher load.
TOP LAYER
Large open cell, medium density
breathable reticulated foam provides a
cool, low surface moisture level while
delivering comfort and immersion. Made
with antibacterial properties
HR Foam is cool to touch and not
affected by heat build up or extreme
cold like Visco foam. Soft density for
comfort and immersion and made
with antibacterial properties
new Blue Visco Gel foam reduces
MID LAYER
Extra Firm Breathable reticulated foam
with SPS technology
Medium density HR foam
provides improved support,
positioning and immersion
Medium density Visco foam
provides improved support,
positioning and immersion.
BOTTOM LAYER
Extra Firm Breathable
Reticulated foam
Firm HR contour cut foam for stability
& durability with SPS technology
Firm HR contour cut foam for support,
stability & durability with SPS technology
WEIGHT CAPACITY
250lbs / 114kg
300lbs / 136.1kg
a
c
b
c
heat build up critical to minimize
skin integrity issues. Soft density
for comfort and immersion. Made
with antibacterial properties.
a
DIMENSIONS
Available Widths1
12"/30 , 14"/35 , 16"/40 , 18"/45 , 20"/50
cm
cm
cm
cm
cm
16"/40 , 18"/45 , 20"/50 , 22"/55
cm
cm
cm
cm
10"/25 , 12"/30 , 14"/35 , 16"/40 , 18"/45 ,
20"/50 , 22"/55
cm
cm
cm
cm
cm
cm
cm
Available Depths2
12"/30 , 14"/35 , 16"/40 , 18"/45 , 20"/50
16"/40 , 18"/45 , 20"/50 , 22"/55
12"/30 , 14"/35 , 16"/40 , 18"/45 , 20"/50
a Height at adductors
3.5"/9
cm
4.25"/10
4.25"/10
b Height at abductor
3"/7.6
cm
3.75"/9.5
c Height at leg troughs
cm
2.5"/6.3
1
CUSHION WEIGHT
cm
cm
cm
cm
cm
cm
cm
cm
cm
cm
cm
cm
cm
cm
3.25"/8.2
cm
cm
cm
3.75"/9.5
cm
3.25"/8.2
cm
cm
Actual cushion width is 0.5” less than stated to fit 2 sizes of wheelchair. Actual cushion depth is 2” longer than stated to allow for radius cut.
1.9lbs/0.86kg
2
2.4lbs/1.1kg
2.8lbs/1.3kg
Based on a 1616 Cushion
ACCESSORIES
S O L I D S E AT I N S E R T
P E LV I C O B L I Q U I T Y / L AT E R A L PA D S
Available in 0.5” or can be doubled to 1”, are easy to install in
a variety of locations with double-sided tape and trimmed to fit.
Can be used as a pelvic obliquity build up or adduction for thighs.
Slim profile Solid seat inserts are
available to provide a firm sitting
surface and are contoured to
eliminate the hammock effect
when cushions are used on a
sling seat.
HA AC1
HA SC1
HA PC1
FH AC2
FH SC2
FH PC2
VC2
KC10
KC12
KC14
4.7lbs
/2.1kg
4.8lbs
/2.2kg
5.5lbs
/2.5kg
3.3lbs
/1.5kg
3.8lbs
/1.7kg
4.3lbs
/1.9kg
4.6lbs
/2.1kg
1.8lbs
/0.8kg
2lbs
/0.9kg
2.5lbs
/1.1kg
PRODUCT WEIGHT
Back Shell Only
1.6lbs/0.7kg
Mounting Hardware
6.3lbs
/2.9kg
Complete
1
ACBACK
HEIGHT
12"/30.5cm
16"/40.6cm
20"/50.8cm
15"
16"
18"
20"
22"
/38.1cm /40.6cm /45.7cm /50.8cm /55.8cm
•
•
•
HEIGHT
12"/30.5cm
16"/40.6cm
20"/50.8cm
HA*
•
•
•
•
•
•
•
•
•
•
•
4.9lbs
/2.2kg
•
15"
16"
18"
20"
22"
/38.1cm /40.6cm /45.7cm /50.8cm /55.8cm
•
•
•
•
•
•
•
HEIGHT
5.4lbs
/2.4kg
5.9lbs
/2.7kg
WIDTH
15"
16"
18"
20"
22"
/38.1cm /40.6cm /45.7cm /50.8cm /55.8cm
•
•
•
•
HA*
VCBACK
HEIGHT
•
KCBACK
HEIGHT
HA*
•
•
•
•
•
•
•
•
WIDTH
15"
16"
18"
20"
22"
/38.1cm /40.6cm /45.7cm /50.8cm /55.8cm
•
•
16"/40.6cm
20"/50.8cm
*HA models adjust in height from 16" to 20" (30.5cm to 50.8cm).
AVA I L A B L E F R O M :
PCBACK
12"/30.5cm
16"/40.6cm
20"/50.8cm
WIDTH
•
•
•
•
7.1lbs
/3.2kg
6.2lbs
/2.8kg
3.3lbs
/1.5kg
3.5lbs
/1.6kg
4lbs
/1.8kg
Based on 16” wide back. 2 Based on 1616 back.
WIDTH
HA*
SCBACK
6.4lbs
/3.0kg
1.45lbs/0.6kg
WIDTH
10"
/25.4cm
•
•
12"
/30.5cm
•
•
14"
/35.6cm
WARRANTY
The nxt Seating Series is manufactured
with great care with a focus on quality
and function. Each product comes with a
two year warranty against manufacturer's
defects from the date of purchase
and applies to the original purchaser.
Dynamic Health Care Solutions reserves
the right to repair or replace it free of
charge. The warranty does not apply to
normal wear and tear, burns, punctures
or tears to the cover. See specific
product manual for more details.
8-10.5"/20-27cm 9-11.5"/23-29cm 10-11.5"/25-32cm
Manufactured and
Distributed in Canada by:
Dynamic Health Care Solutions
753011 Second Line, Mono, Ontario L9W 2Z2
Tel: (866) 875-2877 • (519) 942-8441
Fax: (866) 875-2878 • (519) 942-2186
www.DynamicHCS.com