PRM-35C
Polypropylene Random Copolymer
MELT
-
35
DENSITY - 0.900
PRM-35C is a certified prime grade Clarified Injection Molding copolymer specially designed for thin-walled applications requiring outstanding clarity and good impact resistance. PRM-35C complies with FDA regulations 21CFR 177.1520 (a)(3)(i) / (c)3.1 + 3.2,
and most international regualtions concerning the use of Polypropylene in contact with
food.
Features:
•
•
•
•
•
•
•
•
Fast molding cycle
Very good dimensional stability
Good impact resistance
Very good processability
High clarity, gloss, flow
Low blooming
Medium rigidity
High flow rate
Typical Applications:
• High quality housewares where high
clarity is a key requirement
• Thin-wall high gloss rigid packaging
• High quality consumer articles
PROPERTIES
ASTM
UNIT
VALUES
Density
D1505
g/cm3
0.900
Melt Flow Rate (190°C, 2.16kg)
D1238
g/10 min
35
PHYSICAL
MECHANICAL (Injection Molded)
Tensile Strength (Yield, 2.0 in/min)
D638
psi
4050
Tensile Elongation (Yield, 2.0 in/min)
D638
%
9.0
Flexural Modulus - 1% Secant
D790
psi
148k
Notched Izod Impact
D256
ft-lb/in
1.2
Rockwell Hardness (R-Scale)
D785
HDT Under Load (66 psi, Unannealed)
D648
o
F
180
Vicat Softening Temperature
D1525
o
F
273
93
The technical information, suggested uses and applications presented are made without charge and are believed to be reliable; however, the Ravago Group* disclaims responsibility for reliance and results of use of this information.
THE RAVAGO GROUP DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, CONCERNING THE PRODUCT(S) DESCRIBED HEREINABOVE, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. The Ravago Group expressly disclaims any statements or suggestions as being inducement. All users should rely upon their own knowledge and testing in determining product suitability.