Simulation in NX 9.0
Water flow true nozzle.
Task:
Create simulation template in Siemens NX 9.0
So simulation geometry can be edited and optimised.
Please record video during work. Would like have reference so can adjust
simulation, geometry in the future myself.
Goal
Create the most optimum geometry, so water flow can get as quick is
possible to point X
Simulation Details
Point X
Water must get to
this point as quick is
possible, with the
highest volume and
velocity
Point X
Nozzle.
Parameters, which can be
adjusted:
Shape, Diameter, Length of
the tube
Water flow.
Pressure 3 bar.
Velocity can be adjuste
Parameters which can be adjusted
Nozzle shape, length, diameter
Goal is to get as quick as
possible water to point X
True small gap of 0.05mm
Water need get to point X
true small cavity, gap
0.05mm
Point X
If is possible, you can make
Solid bar spinning 85rev/
min
Parameters which can be adjusted
6. Flowing rate
7. Preassure
5. Nozzle Shape
4. Diameter D
1. Length A,
If its necessary, this can be
inside nozzle
2. Length B
Optimum would be 5mm
3. Length C