Installation Instructions
C
®
ChromaSense Light Instructions
®
US
Model: TSCH-1
Figure 3
25' Cable
1. Attach the optional Lamp Trim Ring by applying three
small dabs of silicone equally spaced around the inside
edge and secure into place (see Figure 1). Let silicone set
overnight.
To Fixture A or B
terminal on TSCH or
TSMC Board
Figure 1
J6
J7
J10
M
AD
Ite E
IN
Ne m
t 1 No
. U
CL /2 F 315 .S.A
EA L. O 20 .
R Z.
COMM
IN/OUT
ON
E
B
J11
FIXTURE B
SIL
IC
+3.3V
**Note: Cascade in and
Cascade out Used only
for ganging multiple
TSMC control modules
+5V
+5V
1
J1
**CASCADE **CASCADE
IN
OUT
TS3
SPEAKERS
J4
+24V
+
TS2
TS1
RIGHT
10
Optional
Second Light
+
TS4
+15V
A
POWER IN
NOTE: Excess
silicone can be
removed with alcohol
Lamp
Trim Ring
FIXTURE A
COMM
IN/OUT
LEFT
-
WALL SWITCH IN
2. Select a location in the ceiling for the ChromaSense
light(s). The ChromaSense option comes with one light.
The ChromaSense module can power up to two lights. It
is recommended that steam baths over six feet in length
use 2 lights.
3. The mounting location requires a 2 ½" hole for each light
(see Figure 2).
TS5
TS6
TSCH or TSMC Module
6. Plug the cable(s) into the control module (see Figure 3).
7. Plug the other end into the light(s) (see Figure 2).
8. Remove the self adhesive liner and attach to the ceiling
(see Figure 2).
Figure 2
25' Cable
9. Seal the edge of the light with silicone.
To Fixture A or B terminal
on TSCH or TSMC Board
(Figure 3)
NOTE: Not applicable for the AudioSense only installation
Figure 4
2 ½"
CL
Ne
EA
t
R
Ite 1/2
MA m No. FL. OZ
.
DE
3
IN 1520
U.S
.A .
Adhesive
Liner
4. Please observe orientation of the 25' ChromaSense light
cable. Make sure the female end of this cable is routed
toward the ChromaSense light fixture in the steam room.
SILIC
ONE
Apply silicone around outer edge to provide a watertight seal
5. Route the special light cable(s) (supplied) from the control
module (Figure 3) to the light mounting location(s).
®
East Coast Office: 25 E. Union Ave., East Rutherford, NJ 07073 • Tel: 800-577-6478 • Fax: 201-933-0746
West Coast Office: Tel: 800-355-6478 • Fax: 661-940-1617
06/10
Pub. No. 285-A