® 524
HIGH SPEED/HIGH CYCLE DOORS
Providing a rapid opening speed of 24 inches per second and tested to perform for 500,000 cycles, Cookson’s Cycle-Master®
524 Door is your ultimate choice for performance and security in a high speed, high cycle overhead coiling steel door. Available
in a single slat or insulated double slat curtain design with full perimeter weather stripping, Cycle-Master 524 Doors reduce
opening time and thermal transfer to reduce your energy costs.
Unparalleled Performance
Increased
productivity at high traffic openings. Rapid
opening speed of 24 inches per second and 500,000 cycle
performance rating maximizes the potential use of your
opening.
Quickly
seal openings and lock in temperature control.
Faster cycles minimize the loss of heated or cooled air as
vehicles pass through openings. Maximize climate control
with Cookson’s Insulated Cycle-Master 524 Door.
Maximize
security. The 524 Doors rapid cycle speed helps
you monitor passage and prevent unwanted entry. Steel
construction makes forced entry nearly impossible.
Prolonged
value. Reduce maintenance and replacement
costs with the 524 Door’s proven 500,000 cycle
performance, long term durability and sustainable design.
The Cookson Company, Inc.
Features of the 524 Door
Available
in stainless steel #4 polish or galvanized
steel with our exclusive CycleCoteTM low friction
powder coat finish in gray, tan, white, or silver. Each
unit includes our specially designed, patent pending,
finish protection system.
A
complete control and safety system, featuring a
NEMA 4 rated control panel. UL325-2010 entrapment
protection photo eyes and a wireless sensing edge
are provided as standard.
Each
unit is built to exact size requirements allowing
size flexibility up to 20’ wide and 20’ high on standard
construction. A range of operator mountings and
electrical control options are also available.
All
units include Cookson’s exclusive two year
warranty as standard.
Dimensions shown are for initial design. For final design, specifications,
and to view the complete Cookson Product line, visit Cooksondoor.com.
THE PREFERRED
HIGH SPEED/HIGH CYCLE DOOR
524 High Speed / High Cycle Service Door
Unitized coil box houses curtain, barrel,
and brackets. Access hatch provided for
ease of maintenance.
Retractable anti-wear device installed
at the shaft assembly. Prolongs curtain
aesthetics and reduces operational noise.
It is not visible during normal operation
and patent pending.
Guides with minimum 1/4” thick ASTMA36 structural steel angles provided with
double brush strip for sealing and reduced
wear.
Structural steel bottom bar provided with
wireless sensing edge for safety and
weather seal.
Springless barrel reduces maintenance
requirements and increases cycle capacity
to 500K.
Cookson’s CycleCote Powder Coat Finish provides a low
coefficient of friction wear-resistance for added durability.
Choice of Finishes
Stainless Steel #4 Polish
CycleCoteTM
(Standard) Tan, Gray, White, or Silver
(Optional) 188 RAL Colors
(Optional) Unlimited Custom Colors
524 Control & Drive System
Motor - UL Listed, SEW Eurodrive TEFC
variable speed motor with sprocket and
chain drive horizontally mounted to unitize
structure. High performance brake.
Control Panel - Wall mounted starter. PLC
Controller with variable frequency drive
featuring soft-start and soft-stop at both ends of limit travel.
NEMA 4 rated for harsh weather environments. 20” x 24” x 8”.
UL325-2010 Compliant Photo Eye Sensors Interruption of the beam before the door fully
closes causes the door to immediately stop
downward travel and reverse direction to the fully
open position.
UL325 Wireless Sensing Edge - Contact with the edge
before the door fully closes causes the door
to immediately stop downward travel and
reverse direction to the fully open position. No
traveling electric cord between the edge and
motor operator is required.
Available Options
Activation Devices - Motion detector, induction loop, additional
photo eyes, etc.
Sensing Devices - Light curtains, presence sensor, additional
photo eyes, etc.
Annunciators - Horn, strobe, beacon, etc.
Also - Two-door interlocks, long distance wiring and additional
monitoring controls
TYPICAL DETAILS
12”
12” CLEARANCE
REQUIRED
21 - 25”
SAFETY BRAKE
SAFETY BRAKE
22 - 24”
12” 20 - 24”
20” x 24”
CONTROL
BOX
CLEAR OPENING HEIGHT
8-1/2”
10”
20” x 24”
CONTROL
BOX
10”
CM-524 SERVICE DOOR ELEVATION
4”
10”
10”
CM-524 SERVICE DOOR SECTION
OPERATOR MOUNTED FRONT OF COIL
OPERATOR MOUNTED FRONT OF COIL
GUIDE
BRUSH
8-1/2”
CLEAR OPENING HEIGHT
3” CLEARANCE
REQUIRED
17-1/2”
23 - 25”
17-1/2”
CM-524I INSULATED SD ELEVATION
OPERATOR MOUNTED TOP OF COIL
CM-524I INSULATED SD SECTION
OPERATOR MOUNTED TOP OF COIL
4”
JAMB OPENING WIDTH
GUIDE
BRUSH
4-1/2”
4-1/2”
1-15/16”
UHMW WINDLOCK BAR
4”
UHMW WINDLOCK BAR
1/2”
FACE OF WALL GUIDES
2-1/16”
4”
GUIDE OPENING WIDTH
FACE OF WALL GUIDES
P.O. Box 23880
Phoenix, AZ 85063
The Cookson Company, Inc.
1/2”
Phone: (800) 390-8590
Fax: (866) 448-6804
Visit our website at Cooksondoor.com
Or e-mail us at [email protected]
Facebook.com/The.Cookson.Company © 2012