Single action
Solenoid brake valve
Features:
This solenoid valve can set up as an on/off valve or as a proportional pulse valve
CAUTION; pulse mode bleed air during pulse operation
Set up:
Keep button pressed while powering up
Release the button, LED will blink in a one blink pace
Set TX to OFF (close) position
Press and release button, LED will now blink at a two blinks pace
Move the TX to maximum (open) position
Press and release the button again, now the LED will stop blinking
To change mode press the button while the valve is in open position
Double action
Solenoid Gear/door valve
Features:
This solenoid valve can be use to open and close landing gears, gear doors, air brakes, canopies etc.
Set up:
Keep button pressed while powering up
Release the button, LED will blink in a one blink pace
Set TX to the position you want for port “A” to be activated
Press and release button, LED will now blink at a two blinks pace
Move the TX to the position you want for port ”B” to be activated
Press and release the button again and you are done