WIN NA
®
solutions
forms
WIN NA
®
light
solutions
SPECIFICATIONS
®
WIN NA
solutions
forms
®
forms
light
WIN NA
STEP 12
Project:
ROUND
Qty:
forms
light
4.60"
WIN NA
solutions
GREEN CMYK:
C - 50
M-0
Y - 100
K - 25
GREY CMYK:
C-0
M-0
Y-0
K - 50
Construction
BLACK
CMYK:
WHITE CMYK:
C - 0 Die-cast housing
C - 0 with solid aluminum, brass, or
M-0
M-0
Step12 is a surface mount
Y - 0 stainless steel
Y -faceplate.
0
K - 100
0
step light thatK -mounts
over a Steel City 2-1/8” deep,
GREEN RGB:
R - 109
G - 157
B - 49
GREY RGB:
R - 147
G - 149
B - 152
BLACK RGB:
without
R - 35
G - 31
B - 32
®
forms
light
LED module with
concealed optic
Integral
driver
WIN NA
Ribbed design with matte
black finish to reduce glare
solutions
color
Accepted color combinations
®
solutions
forms
®
2.125" box min.
2.125" deep Steel City 4" octagonal
box 54171 or equivalent (by others)
CROSS SECTION
light
18"
L
Approx
10'-0"
M
S
Approx Approx
4'-0"
3'-0"
Grid in 1' increments
0.1
1.0
5.0
10.0
0.1
1.0
5.0
10.0
4” octagon box 54171 or equivalent (by others)
WHITE RGB:
visible
R -fasteners.
255
G - 255
B - 255
Source
Light source is a single powerful LED available in five
white color temperatures and six colored LED choices.
Optics
Concealed optic is available in three light distribution
patterns. Short for narrow corridors, Medium for wide
corridors, and Long for large area illumination.
Electrical
Integral electronic drivers are multi volt input 120277V, and available in standard or 0-10V dimming.
Non-dimming units consume 2.5W (350mA) or 3.5W
(700mA). Dimming units consume 4W (350mA only).
Typical Distribution Based on 700mA WHT30K
Short
light
Type:
light
WIN NA
solutions
forms
STEP
0.1
1.0
5.0
10.0
Medium
Environment
ETL / cETL listed dry location only.
Finish
Recessed surfaces have a ribbed design with matte
black finish to reduce glare. Faceplates are available
in five metal finishes with protective clear coat or one
of seven polyester powder coat painted finishes. A
primer only finish is also available for field painting.
Warranty
5-year limited warranty. Complete warranty
terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user
environment and application.
All values are design or typical values, measured
under laboratory conditions at 25 °C.
Assembled in America (Buy American Act Compliant)
Performance Data
Dist.
Lumens
Lm/W
Short
50
14.1
Medium
60
17.3
Long
76
21.8
Performance data based on WHT30K non dimming.
Use .5 lumen multiplier for 350mA drive current.
Long
CATALOG NUMBER
Example: STEP12 RND L LST1A 350MA WHT30K MVOLT BA
Series
STEP12
Faceplate Shape
RND Round
Step 12
Voltage
Driver
MVOLT Multi Volt 120V thru 277V
(Blank) Standard Driver
DMD
Dimming Driver
(350mA only)
Distribution
S
M
L
Source
Short
Medium
Long
Drive Current
LST1A LED Step 1
Color Temperature
350mA 350 Milliamps
700mA 700 Milliamps
WHT27K
WHT30K
WHT35K
WHT40K
WHT50K
AMB
Finish
BA
BB
BSS
PB
PSS
BLU
GRN
RED
CYN
RDO
White (27K)
White (30K)
White (35K)
White (40K)
White (50K)
Amber1
Blue
Green
Red
Cyan
Red-Orange
Special
Brushed Aluminum
Brushed Brass
Brushed Stainless Steel
Polished Brass
Polished Stainless Steel
ABP
BBP
LBPS
LSP
PGP
Antique Brass Paint
Brushed Brass Paint
Light Bronze Paint Smooth
Light Silver
Pale Gold
SGB
SGW
PRM
CPF*
CMF*
MOD2 Modification / Consult Factory
Semi Gloss Black
Semi Gloss White
Primer Only
Custom Paint Finish
Custom Metal Finish
Describe Modification:
Notes
1
2
350mA only.
Available by modification only. Consult factory.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015-2017 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be
covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/29/17
STEP12_ROUND
1
WIN NA
®
solutions
forms
WIN NA
®
light
solutions
SPECIFICATIONS
®
forms
STEP
WIN NA
light
Type:
STEP12
solutions
forms
light
Project:
ROUND
WIN
NA
®
solutions
forms
Qty:
light
WIRING & DIMMING
color
Accepted color combinations
POWER SUPPLY / DIMMING ®
Dimming drivers require a 0-10V fluorescent-type dimming
control.GREY CMYK: BLACK CMYK:
GREEN CMYK:
WIN NA
solutions
forms
light
C - 50
M-0
Y - 100
K - 25
C-0
M-0
Y-0
K - 50
C-0
M-0
Y-0
K - 100
WHITE CMYK:
C-0
M-0
Y-0
K-0
GREEN RGB:
R - 109
G - 157
B - 49
GREY RGB:
R - 147
G - 149
B - 152
BLACK RGB:
R - 35
G - 31
B - 32
WHITE RGB:
R - 255
G - 255
B - 255
Read all instructions before installation. Do not make live connections!
WIN NA
®
NON-DIMMING INSTALLATIONS
solutions forms light
Connect
STEP WHITE wire to power NEUTRAL.
Connect STEP BLACK wire to power HOT.
®
Connect STEP GREEN wire to power GROUND.
WIN NA
light
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
To other
STEP
fixtures
WHITE
BLACK
GREEN
forms
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
or
277V
WHITE
BLACK
GREEN
solutions
120V
DIMMING INSTALLATIONS
The integral dimming driver is designed to the 0-10V IEC dimming specification 60929 and is compatible with common 0-10V dimmers and dimming systems.
Do NOT connect line voltage to dimming input wires.
Connect STEP WHITE wire to power NEUTRAL.
Connect STEP BLACK wire to power HOT.
Connect STEP VIOLET wire to POSITIVE INPUT of Dimming Control.
Connect STEP GREY wire to NEGATIVE INPUT of Dimming Control.
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
VIOLET
GREY
VIOLET
GREY
VIOLET
GREY
To other
STEP
fixtures
VIOLET
GREY
VIOLET
GREY
VIOLET
GREY
0-10V (+)
Dimmer (-)
To other
STEP
fixtures
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
120V
or
277V
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015-2017 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein may be
covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 06/29/17
STEP12_ROUND
2