EM-Tec pin stub storage boxes


Order EM-Tec pin stub storage boxes
o
EM-Tec SB77 large capacity wooden box for 77 standard 12.7mm pin stubs
o
EM-Tec SB176 large capacity wooden box for 176 standard 12.7mm pin stubs
o
EM-Tec SB28 medium size clear styrene box for 28 standard 12.7mm pin stubs
o
EM-Tec SB140 large capacity clear styrene box for 140 standard 12.7mm pin stubs
o
EM-Tec SB153 large capacity clear styrene box for 153 standard 12.7mm pin stubs
Introduction
a few examples
#13-090176 EM-Tec SB176 large capacity wooden
box for 176 standard 12.7mm pin stubs
#13-090028 EM-Tec SB28 medium size clear
styrene box for 28 standard 12.7mm pin stubs
The EM-Tec pin stub storage boxes are designed for storing samples on either the standard pin stub or the shorter Zeiss pin stubs. They can be used for
sample handling, long term storage, archiving and even for storing pin based sample holders. The boxes all comprise a custom high density closed cell foam
sheet with holes for the pin stubs. The high density closed cell foam material doesn't crumble and is elastic enough to allow removing and replacing pin
stubs at the same position. The large capacity storage boxes are a more economical and present a 40-50% cost reduction when storing large numbers of pin
stubs.
There is a choice five medium and large capacity EM-Tec pin stub storage boxes:

EM-Tec SB77 wooden box with 77 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored in this box. Made from
beech and birch wood with a solid clear coating on the inside and outside. Includes two brass plated hinges and a single clasp. Outside dimensions
are 189 x 138 x 46mm; 25.5mm inside clearance which leaves a maximum sample height of 22mm on the pin stubs. Light sensitive specimens are
protected when the box remains closed. Medium size archiving box or for protecting valuable sample or calibration standards.

EM-Tec SB176 wooden box with 176 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored in this box. Made from
beech and birch wood with a solid clear coating on the outside and inside. Includes two brass plated hinges and two clasps. Outside dimensions are
276 x 189 x 46mm; 25.5mm inside clearance which leaves a maximum sample height of 22mm on the pin stubs. Light sensitive specimens are
protected when the box remains closed. The is the ideal long term storage box or to protect valuable samples.

EM-Tec SB28 clear styrene box with 28 storage positions for standard 12.7mm pin stubs. Pin stubs up to 50mm can be stored in this box. Made
from clear polystyrene with two hinges and lock. Outside dimensions are 120 x 84 x 36mm; 17mm inside clearance, which permits a maximum
sample height of 13.5mm. Full visibility of samples in this clear styrene box. Low cost pin stub storage box; ideal for short term storage and handling.

EM-Tec SB140 clear styrene box with 140 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored in this box. Made
from clear polystyrene with two hinges and snaplock. Outside dimensions are 228x170x39mm; 20mm inside clearance, which leaves a maximum
sample height of 16.5mm. Full visibility of samples through lid. This medium duty pin stub storage box is an ideal stackable archiving box for pin
stubs. Cost for storage is up to 50% lower, compared with pin stub storage boxes holding 14 or 18 pin stubs.

EM-Tec SB153 clear styrene box with 153 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored in this heavy duty
box. Made from clear polystyrene with two brass plated hinges and snaplock lid. Outside dimensions are 275 x 160 x 57mm. The 34.5mm inside
clearance leaves a maximum sample height of 31mm on the pin stubs. Full visibility of samples or holders through the lid. This clear and heavy duty
high box is ideal for storing pin stub based SEM sample holders and larger specimens. Cost for storing pin stubs in this large capacity box is 40-50%
lower, compared to pin stub storage boxes holding only 14 or 18 pin stubs.
Specifications of the EM-Tec large capacity pin stub storage boxes
Product #
Type
Material
Pin stubs capacity
Inside dimensions
Outside dimensions
13-090077
SB77
Wood / NBR
13-090176
SB176 Wood / NBR
13-090128
SB28
13-090140
13-090153
77 x Ø12.7mm
169x118x25.5mm LxBxH 189x138x46mm
176 x Ø12.7mm
256x169x25.5mm LxBxH 276x189x46mm
Polystyrene / NBR 28 x Ø12.7mm
116x72x16.5mm
LxBxH 120x84x36mm
SB140 Polystyrene / NBR 140 x Ø12.7mm
220X153x20mm
LxBxH 228x170x39mm
SB153 Polystyrene / NBR 153 x Ø12.7mm
264x148x34.5mm LxBxH 275x160x57mm
Ordering Information
*Prices are without tax. Tax might be added in cart.
# 13-090077 EM-Tec SB77 large capacity wooden box for 77 standard 12.7mm pin stubs
↥menu
EM-Tec SB77 wooden box with 77 storage positions for standard 12.7mm pin stubs. Pin stubs up to 100mm can be stored
in this box. Made from beech and birch wood with a solid clear coating on the inside and outside. Includes two brass plated
hinges and a single clasp. Outside dimensions are 189 x 138 x 46mm; 25.5mm inside clearance which leaves a maximum
sample height of 22mm on the pin stubs. Light sensitive specimens are protected when the box remains closed. Medium
size archiving box or for protecting valuable sample or calibration standards.
EM-Tec SB77 large capacity wooden box for 77 standard 12.7mm pin stubs
Product #
Unit
Price*
EM-Tec SB77 large capacity wooden box for 77 standard 12.7mm pin stubs
13-090077
each
€42,50
# 13-090176 EM-Tec SB176 large capacity wooden box for 176 standard 12.7mm pin stubs
↥menu
Add to Quote / Cart
Qty:
1
EM-Tec SB176 wooden box with 176 storage positions for standard 12.7mm pin stubs. Pin stubs up to
100mm can be stored in this box. Made from beech and birch wood with a solid clear coating on the outside
and inside. Includes two brass plated hinges and two clasps. Outside dimensions are 276 x 189 x 46mm;
25.5mm inside clearance which leaves a maximum sample height of 22mm on the pin stubs. Light sensitive
specimens are protected when the box remains closed. The is the ideal long term storage box or to protect
valuable samples.
EM-Tec SB176 large capacity wooden box for 176 standard 12.7mm pin stubs
Product #
Unit
Price*
EM-Tec SB176 large capacity wooden box for 176 standard 12.7mm pin stubs
13-090176
each
€54,50
Add to Quote / Cart
Qty:
1
# 13-090028 EM-Tec SB28 medium size clear styrene box for 28 standard 12.7mm pin stubs
↥menu
EM-Tec SB28 clear styrene box with 28 storage positions for standard 12.7mm pin stubs. Pin stubs up to 50mm can be
stored in this box. Made from clear polystyrene with two hinges and lock. Outside dimensions are 120 x 84 x 36mm; 17mm
inside clearance, which permits a maximum sample height of 13.5mm. Full visibility of samples in this clear styrene box. Low
cost pin stub storage box; ideal for short term storage and handling.
EM-Tec SB28 medium size clear styrene box for 28 standard 12.7mm pin stubs
Product #
Unit
Price*
Add to Quote / Cart
EM-Tec SB28 medium size clear styrene box for 28 standard 12.7mm pin stubs
13-090028
each
€4,95
Qty:
1
# 13-090140 EM-Tec SB140 large capacity clear styrene box for 140 standard 12.7mm pin stubs
↥menu
EM-Tec SB140 clear styrene box with 140 storage positions for standard 12.7mm pin stubs. Pin stubs up to
100mm can be stored in this box. Made from clear polystyrene with two hinges and snaplock. Outside dimensions
are 228x170x39mm; 20mm inside clearance, which leaves a maximum sample height of 16.5mm. Full visibility of
samples through lid. This medium duty pin stub storage box is an ideal stackable archiving box for pin stubs. Cost
for storage is up to 50% lower, compared with pin stub storage boxes holding 14 or 18 pin stubs.
EM-Tec SB140 large capacity clear styrene box for 140 standard 12.7mm pin stubs
Product #
Unit
Price*
EM-Tec SB140 large capacity clear styrene box for 140 standard 12.7mm pin stubs
13-090140
Add to Quote / Cart
Qty:
1
each
€36,50
# 13-090153 EM-Tec SB153 large capacity clear styrene box for 153 standard 12.7mm pin stubs
↥menu
EM-Tec SB153 clear styrene box with 153 storage positions for standard 12.7mm pin stubs. Pin stubs up to
100mm can be stored in this heavy duty box. Made from clear polystyrene with two brass plated hinges and
snaplock lid. Outside dimensions are 275 x 160 x 57mm. The 34.5mm inside clearance leaves a maximum
sample height of 31mm on the pin stubs. Full visibility of samples or holders through the lid. This clear and
heavy duty high box is ideal for storing pin stub based SEM sample holders and larger specimens. Cost for
storing pin stubs in this large capacity box is 40-50% lower, compared to pin stub storage boxes holding
only 14 or 18 pin stubs.
EM-Tec SB153 large capacity clear styrene box for 153 standard 12.7mm pin stubs
Product #
Unit
Price*
13-090153
EM-Tec SB153 large capacity clear styrene box for 153 standard 12.7mm pin stubs
Add to Quote / Cart
Qty:
1
each
€44,50
↥menu
© Micro to Nano 2015
Website: www.microtonano.com
E-mail: [email protected]
Micro to Nano
Wateringweg 79
2031 EK Haarlem
Netherlands
Tel:
Netherlands: +31 (0)85 2013155
Germany: +49 (0)322- 21092676
Switzerland: +41 (0)43-5086099
KvK-nr: 62301950
Btw-nr (Tax ID): NL854754829B01
Bankaccount: 0495516724
IBAN: NL32ABNA0495516724
BIC (SWIFT): ABNANL2A.
close
SEM / FIB Supplies
TEM Supplies
Calibration
Sample Preparation
AFM /
SPM
LM
SEM Sample Stubs









Overview
TEM Grids
SEM / FIB


Value-Tec
TEM grids
Cryo Grid Box
TEM
SEM Stage Adapters
Filaments
AFM / SPM
SEM Sample Holders


AFM
Discs
Au on C resolution
Supports and Substrates
test
AFM
FEI/Philips SEM Pin
 Carbon Discs
Holders
Stubs
 EM-Tec TEM
 Sn on C resolution
grids
test
 Silicon Substrates
Tescan SEM Pin Stubs
Disc
Support Films
 Magnification
 Silicon Finder Grid
Storage
Standard SEM Pin
Calibration
Stubs
 Mica Discs and
Graphene
Mica
 Grid Pattern 1um
Sheets
Zeiss SEM pin stubs
Discs
FIB Grids
 Grid Pattern 10um
 Gold Coated
Hitachi In Lens Stubs
Slides
 Cu FIB Grids
 Multiple Targets
Hitachi M4 SEM Stubs
 Gold Coated Si
 Mo FIB Grids
 Low Magnification
Wafer
JEOL SEM Stubs
Grid Storage
EDX/WDX
SEM Prep. Stands
Other SEM Stubs
Sample Stub Adapters

Sputter Targets
Tweezers
LM
Metallographic mount
holders

Individual
Graticules
Multiple pin stub
holders

Multiple Targets
Multiple JEOL stub
holders

Cryo grid box
tweezers

Gatan 3View pin
tweezers

Wafer handling
tweezers

Plastic tweezers
Probes & Picks
Black metal slides
Calibration

Individual
Graticules

Multiple
Targets

Multiple Hitachi stub
holders

Reinforced plastic
probes

Geological slide
holders

Mini needle
probes

SampleClamp holders

Versatile vise clamp
holders

Small and universal
vises

90°/off-set holder

Angled and Tilt
holders

Centering vise holder

TEM grid holders

STEM imaging holder

Bulk SEM sample
holders

Gold series sample
holders

FIB grid holders

S-Clip sample holders

Reference holders
Conductive Adhesives

Aluminium Tape

Copper Tape

Silver Microtip
Pen

Silver Filled Epoxy
Non-conductive Adhesives

Kapton Tape

Green PET Tape

Non-conductive
tabs
Stainless Steel Mesh
Sample Storage

Pin stub storage
boxes

Barrier Foil
Ziplock Bags

EBSD sample holders


Compact sample
holders
Wafer Carrier
Trays

Clear plastic boxes

Small Cardboard
Boxes
Filaments
FIB Grids

Cu FIB Grids

Mo FIB Grids
Tools
Pin Stub Storage Boxes

Wafer Cleaving
Pliers

Vacuum pick-up
tools

Microscopy hand
tools
Preparation mats & tiles
© Micro to Nano 2015
Website: www.microtonano.com
E-mail: [email protected]
Micro to Nano
Wateringweg 79
2031 EK Haarlem
Netherlands
Tel:
Netherlands: +31 (0)85 2013155
Germany: +49 (0)322- 21092676
Switzerland: +41 (0)43-5086099
KvK-nr: 62301950
Btw-nr (Tax ID): NL854754829B01
Bankaccount: 0495516724
IBAN: NL32ABNA0495516724
BIC (SWIFT): ABNANL2A.