Fiber Solution
Solution
Fiber
Cable Management Systems- Inside Plant
ODF FR SERIES - RACK MOUNT SLIDING HIGH DENSITY PANEL
The rack mount slide-out type fiber optic distribution enclosures perform fiber splicing, distribution, termination, patching, storage and management in one unit. They support both crossconnect and inter connect architecture, and provide interfaces between outside plant cables and transmission equipment.
Each distribution enclosure incorporates a slide-out drawer to allow full frontal access and operation. The slide-out drawer has universal adapter plug-ins on the patch panel and has
splice tray(s) behind the patch panel.
Additional splice trays can be stacked on top to increase capacity. Each splice tray can accommodate up to 24 single fiber splice protection sleeves (with diameter of 2.3mm) or 6 ribbon
splice protection sleeves. Splice trays can be opened individually and removed from the drawer. Excess length of cables/pigtails is stored in reels behind the patch panel. The distribution
enclosures employ fiber guide mechanism at specific points of the fiber patch providing fiber bend control. Horizontal cable guide is also incorporated at on the front of the patch panel of
each distribution enclosure to allow the horizontal routing of patch cords. The horizontal cable guide is removable and position adjustable. The outside-plant cable input ports are located
at the rear of the side panels. The fiber distribution enclosures are rack mountable in standard 19" or ETSI (515mm) equipment rack, and are available in Rack Units of 1 or 2.
Front view
24 & 48 Port SC
Inside view
Features
•
•
•
•
Complied with 19” cabinet
Drawer type of compartment
Easy patch cord management
Easy to installation.
Cable entry
Applications
•
•
•
•
•
•
Benefits
Interconnects
Cross-connects
Independent service providing
CATV networks
Main distributions
Intermediate distributions
• Provides excellent access for termination of optical fibers,
Internal fiber routing and patch cord management.
• Unlimited access for cable entry, excellent for use with
pre-terminated cables.
14FODF-FR-2U Drawing
14FODF-FR-1U Drawing
C-32
Fiber Solution
Solution
Fiber
Cable Management Systems- Inside Plant
14FODF-FR-4U Drawing
14FODF-FR-5U Drawing
14FODF-FR-6U Drawing
Splice cassettes to be used with 14FODF-FR
Ordering
Part no.
14FODF-FR-1U-X-Y
14FODF-FR-2U-X-Y
14FODF-FR-3U-X-Y
Dimensions (mm)
435x245.4x44
435x245.4x88.5
435x245.4x132.5
14FODF-FR-4U-X-Y 14FODF-FR-5U-X-Y
435x245.4x177.5
435x245.4x222
14FODF-FR-6U-X-Y
435x245.4x311
LC and MTRJ
48
96
144
192
288
384
All other adaptors like
24
48
72
96
144
192
Maximum no of trays
2
4
6
8
10
12
Weight (Kg)
3
4
6
8
10
12
Maximum capacity
FC, ST, SC, E-2000 ETC
Ordering Legend
X
Type of adaptor cutout
Y
Type of splice tray
1
ST, FC
A
Single fiber splice tray
B
Ribbon fiber splice tray
2
3
SC Simplex, E-2000, MTRJ, LC duplex
SC duplex
C-33