LOOK / COOL WALL
INSTALLATION SHEET
PAGE: 1 OF 3
MODELS: S7250, S7252, S7270
IMPORTANT - READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES, BY A PERSON FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THE PRODUCT, AND THE HAZARDS INVOLVED. PROPER GROUNDING IS REQUIRED FOR SAFETY.
INSTALLATION FOR DIRECT FEED
A - PREPARE SURFACE FOR INSTALLATION USING DIMENSIONS BELOW.
B - UNFASTEN THE SET SCREWS WITH INCLUDED ALLEN KEY TO REMOVE THE BASE FROM THE FIXTURE.
DO NOT COMPLETELY REMOVE SCREWS.
C - INSERT THE LIQUID TIGHT GROMMET INTO FIXTURE BASE.
D - PASS EXTERIOR CABLE THROUGH LIQUID TIGHT GROMMET.
A+B
D
C
FEED
POSITION
3½"
(87mm)
A
LIQUID TIGHT
GROMMET
(INCLUDED)
LIQUID TIGHT
GROMMET
(INCLUDED)
9⅝"
(245mm)
FIXTURE
BASE
FIXTURE
BASE
FIXTURE
BASE
FIXTURE
B
EXTERIOR CABLE
SET SCREW
ALLEN KEY
(INCLUDED)
3½"
(89mm)
E - INSTALL THE FIXTURE BASE TO THE WALL USING APPROPRIATE ANCHORS.
F - MAKE ALL NECESSARY WIRE CONNECTIONS USING A FLAT HEAD SCREWDRIVER (SEE WIRING DIAGRAM BELOW).
G - FASTEN THE FIXTURE ON ITS BASE WITH THE SET SCREWS USING INCLUDED ALLEN KEY.
F
E
FIXTURE
BASE
G
FIXTURE
BASE
FIXTURE
BASE
1
2
3
SCREWS
(NOT INCLUDED)
FIXTURE
SET SCREW
UNV (120-277V)
1
2
3
2x
RUBBER WASHER
2x
METAL WASHER
2x
NYLTITE WASHER
INS-459
!
REM (24V)
ALLEN KEY
(INCLUDED)
DISCONNECT MAIN LINE BEFORE
CONNECTING SECONDARY CONNECTOR
LAST UPDATE: APRIL 20, 2017
MD - R0
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
LOOK / COOL WALL
INSTALLATION SHEET
PAGE: 2 OF 3
MODELS: S7250, S7252, S7270
INSTALLATION FOR 4" JUNCTION BOX
A - UNFASTEN THE SET SCREWS WITH INCLUDED ALLEN KEY TO REMOVE THE BASE FROM THE FIXTURE.
DO NOT COMPLETELY REMOVE SCREWS.
B - FIX THE UNIVERSAL CROSSBAR TO THE JUNCTION BOX USING SCREWS (NOT INCLUDED).
MAKE SURE THE UNIVERSAL CROSSBAR IS PROPERLY ALIGNED.
C - INSTALL THE MOUNTING PLATE ON THE UNIVERSAL CROSSBAR WITH INCLUDED SCREWS.
A
B
C
JUNCTION BOX
FIXTURE
BASE
UNIVERSAL
CROSSBAR
UNIVERSAL
CROSSBAR
FIXTURE
SCREWS
(NOT INCLUDED)
SET SCREW
CROSSBAR ALIGNMENT
ALLEN KEY
(INCLUDED)
MOUNTING
PLATE
OR
HORIZONTAL
FLAT HEAD
PHILLIPS
SCREWS
(INCLUDED)
VERTICAL
D - MAKE ALL NECESSARY WIRE CONNECTIONS (SEE WIRING DIAGRAM BELOW).
E - SCREW THE FIXTURE BASE TO THE MOUNTING PLATE USING THE INCLUDED SCREWS.
F - FASTEN THE FIXTURE ON ITS BASE WITH THE SET SCREWS USING INCLUDED ALLEN KEY.
D+E
F
FIXTURE
BASE
MOUNTING
PLATE
FIXTURE
BASE
D
PAN HEAD
PHILLIPS
SCREWS
(INCLUDED)
E
UNV (120-277V)
24V INPUT
120-277V INPUT
FIXTURE
!
REM (24V)
FIXTURE
SET SCREW
ALLEN KEY
(INCLUDED)
FIXTURE
DISCONNECT MAIN LINE BEFORE
CONNECTING SECONDARY CONNECTOR
INS-459
LAST UPDATE: APRIL 20, 2017
MD - R0
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
LOOK / COOL WALL
INSTALLATION SHEET
PAGE: 3 OF 3
MODELS: S7250, S7252, S7270
INSTALLATION FOR 2" JUNCTION BOX
A - UNFASTEN THE SET SCREWS WITH INCLUDED ALLEN KEY TO REMOVE THE BASE FROM THE FIXTURE.
DO NOT COMPLETELY REMOVE SCREWS.
B - INSTALL THE MOUNTING PLATE ON THE JUNCTION BOX USING THE INCLUDED FLAT HEAD SCREWS.
MAKE SURE THE JUNCTION BOX IS PROPERLY ALIGNED.
C - MAKE ALL NECESSARY WIRE CONNECTIONS (SEE WIRING DIAGRAM BELOW).
D - SCREW THE FIXTURE BASE TO THE MOUNTING PLATE USING THE INCLUDED SCREWS.
E - FASTEN THE FIXTURE ON ITS BASE WITH THE SET SCREWS USING INCLUDED ALLEN KEY.
A
C+D
B
FIXTURE
BASE
JUNCTION BOX
MOUNTING
PLATE
D
C
FLAT HEAD
PHILIPS
SCREWS
(INCLUDED)
FIXTURE
MOUNTING
PLATE
SET SCREW
PAN HEAD
PHILIPS
SCREWS
(INCLUDED)
FIXTURE
BASE
UNV (120-277V)
ALLEN KEY
(INCLUDED)
JUNCTION BOX ALIGNMENT
HORIZONTAL
24V INPUT
120-277V INPUT
FIXTURE
OR
VERTICAL
!
REM (24V)
FIXTURE
DISCONNECT MAIN LINE BEFORE
CONNECTING SECONDARY CONNECTOR
E
FIXTURE
BASE
FIXTURE
SET SCREW
ALLEN KEY
(INCLUDED)
INS-459
LAST UPDATE: APRIL 20, 2017
MD - R0
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com