ITEM NO.: LS-22292
ASSEMBLY INSTRUCTIONS:
1. CAREFULLY UNPACK AND PLACE ALL LAMP
Led Shade (D)
Large Hex Spanner(F)
PARTS ON A SMOOTH SURFACE AND LINE THEM
UP AS PER THE SKETCH.
2. SCREW ARM (C) INTO BASE (A), USE SMALL HEX
SPANNER (G) TO SCREW NUT (H) INTO THREAD HOLE (I).
3. PUT LED DRIVER (B) INTO BASE (A).
4. ADJUST ARM (C) AND LED SHADE (D) AND ENJOY YOUR
NEW LAMP.
TOUCH SWITCH USE INSTRUCTIONS:
1. THE SWITCH OF THE LAMP IS A TOUCH SWITCH, WHEN THE POWER IS ON, THE SWITCH IS IN
THE LIGHTED CIRCLE ON BASE.
2. TOUCH THE LIGHT CIRCLE, WITHIN 1 SECOND THE LIGHT WILL COME ON, WHEN TOUCHING FOR
1 SECOND AGAIN, LIGHT WILL GO OFF.
3. HOLD THE LIGHT CIRCLE LONGER THAN 1 SECOND AND LIGHT WILL GRADUALLY BECOME
BRIGHTER; HOLD THE LIGHT CIRCLE AGAIN LONGER THAN 1 SECOND AND THE LIGHT WILL
GRADUALLY BECOME DIM.
4. MEMORY OF LAST OPERATION WILL BE STORED FOR NEXT USE.
ATTENTION:
WHEN ARM (C) OR LED SHADE (D) IS MOVED, SECURE WITH LARGE HEX SPANNER (G) BY
TURNING NUT (E), DO NOT OVER TIGHTEN.
USE 72PCS 0.06W (MAXIMUM) LED BULB. (BULBS INCLUDED)
※ PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.
※ SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.