MIGHTY MAC™
LIGHTING FOR SECURITY DETENTION
LETTER FROM THE PRESIDENT
This product guide has been designed to provide specifiers of security detention lighting with the most objective
information available for the selection of housing styles,
materials, and light levels. By reviewing the introduction
and supporting material for each specific security detention
application in this guide, you'll benefit from Kenall’s more
than 20 years of security detention lighting experience.
Over the years, security detention lighting has developed
through lighting manufacturers’ responses to specifications from both the federal government and state correctional departments. Although these unrelated government
authorities each developed their own set of specifications,
a number of categories and criteria have become acknowledged throughout the industry as “Best Practices” for
lighting security detention facilities.
There are currently “Best Practices” for three areas of
security detention lighting: housing style, material selection, and lighting levels. Only lighting levels have been
defined in terms of performance while the other areas are
defined by features.
The first of these Best Practice categories is Housing
Style. Two basic housing styles are typically used. One is a
seam-welded housing with a hinged lens frame; the other
is a seam-welded housing with an integral lens hinged to a
baseplate. You'll find detailed information on the features
and benefits of both styles on pages 6-7.
Jim Hawkins, President, Kenall Manufacturing
Table of contents
what's new..............................................................3
levels of security.............................................4-5
housing styles...................................................6-7
product universe..............................................8-9
Cells...................................................................10-11
corridors.........................................................12-13
dayroom/catwalk..........................................14-15
washroom........................................................16-17
cafeteria................................................................18
recreation area..................................................19
sally port..............................................................20
building mounted...............................................21
Specification pages.......................................22-82
The second category, Materials and Gauges, pertains to
both housings and lenses. A chart showing the materials
and gauges recommended for different security levels can
be found on page 4.
The final category is Lighting Levels. Recommended levels
of illumination for most security detention facility areas
are published in the Illuminating Engineering Society (IES)
Handbook. The Best Practice for cell lighting levels in
particular, however, has been developed by the American
Correctional Association. These ACA cell lighting levels are
also on page 4 of this product guide.
Once you’ve selected the housing styles, materials and
gauges, and light levels appropriate to your security detention applications, you’ll find Kenall Mighty Mac™ or Millenium™ products that will easily meet or exceed all your
performance needs. In fact, the products presented in this
guide are the finest lighting fixtures available anywhere for
security detention applications including:
• Cells
• Cafeterias
• Recreation Areas
• Corridors
• Dayrooms/Catwalks
• Sally Ports
•Washrooms
•Building Exteriors
As president of Kenall Manufacturing, you have my assurance that the products presented in this guide have been
designed and built to exhibit the very highest levels of
design, materials, workmanship, and performance – the
“Best Practices” – in security detention lighting.
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
WHAT'S NEW
IN SECURITY DETENTION
lighting FIXTURES
RMC Convertible fixture series (Pgs. 12-13)
Kenall’s new grid/flange convertible RMC series is the ideal
solution when specifying fixtures for areas where the final
ceiling type may be in question. This fixture series is easily converted between flange and grid by simply adding or removing a
few brackets, thereby saving time and money should the ceiling
design change after fixtures are ordered. The convertible fixture
is available in flange/grid 1'x4', 2'x2', and 2'x4'.
PRC High performance series (pgs. 14-15)
The new T5HO high performance PRC series combines high
lumen output with exceptional efficiency. This 6-lamp, 30,000
lumen fixture is an ideal replacement for 250-watt HID fixtures
because it eliminates the long warm up time required by HID
luminaires, thereby saving energy by allowing the lighting to
be energized only when needed, as well as providing instanton lighting after power interruptions. The PRC series is also
available with a multi-circuit configuration to easily adjust light
levels, and a self-contained emergency lighting system.
The PRC series is ideal for cafeterias, dayrooms, gymnasiums
and any other applications traditionally illuminated by HID
systems.
PRC Series Cross Section
Most Mighty Mac series are now
available with T5 AND T5HO lamps
Given the strict new energy guidelines adopted in many states,
we have incorporated the T5 and T5HO lamp technology in our
most popular housing styles. You will now find these energy
efficient options in the lamp section on the individual product
specification sheets (pages 22-82).
LED Night lights
Combine energy efficiency with low maintenance costs with
Kenall's new LED Night Light option (DLN), offered with most
Mighty Mac™ lighting fixtures. The LED circuit board night light
allows the facility to field adjust light levels, thereby minimizing
vandalism caused by excessive brightness. To check availability,
see specification sheets (pages 22-82).
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Levels of Security and
installation details
Levels of Security
Kenall fixtures meet or exceed every security requirement for their intended application. Whether a
minimum, medium, maximum, or super-maximum application, our fixtures are engineered to resist
everything from the most violent abuse to the cleverest attempts at tampering and concealment.
SECURITY LEVELSMINIMUMMEDIUMMAXIMUM
Housing Gauge – CRS
18
Housing Gauge – SS
Lensing – Polycarbonate
Lensing – Tempered Glass
Fasteners (Lock-Ups)
16
14
SUPER-MAXIMUM
12
20
18
16
14
.187"
.250"
.375"
.500"
.250"
.375"
.500"
.750"
TP (tamperproof)
Recessed TP
Recessed TP
Recessed TP
recommended Lighting levels (footcandles)
Our fixtures’ optical systems are specifically engineered to provide Illuminating Engineering Society
(IES), American Correctional Association (ACA), and Federal Bureau of Prisons (FBOP)-recommended
footcandle levels for their intended applications. Because they utilize the most up-to-date lamp and
ballast combinations, their energy efficiency matches their lighting performance.
RECOMMENDED LIGHTING LEVELS (FOOTCANDLES)
Application
IES RecommendedACA Required FBOP Required
Cells N/A
Corridors
10-20 FTC
Dayrooms
30-50 FTC
Catwalks
10-20 FTC
Washroom
20 FTC
Showers
10 FTC
Cafeteria
5-10 FTC
Kitchens
50-100 FTC
Recreation Area
30 FTC
Sally Port
20 FTC
20 FTC*
20 FTC
* Grooming and desk area only
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
installation and maintenance
Not only are Kenall's security detention fixtures tamper-resistant and able to withstand the critical environments of security
facilities, they are easy to install and maintain. The drawings
below illustrate some of the features designed to ensure
simple installation and quick, easy maintenance by authorized
personnel.
Clamshell Housing Style
• Irretrievable bladetrap/contraband drop slot
• Embossed mounting holes
• Internal hinge (2' or full length)
• Recessed fasteners
• Housing hinges from either side of baseplate
Baseplate
Wiring Access
Hole with Cover
Mounting Access
Holes (2)
Housing
with Lens
Optional
Removable
Gear Tray
DoorFrame Housing Style
Internal
Toolless Fasteners
Housing
• Caulkable (e.g., Pecora Dynapoxy or Sika Dural)
• Full length external hinge for ease of servicing
• Cell fixtures feature internal hinges
•Available with knockouts for surface conduit
Wiring Access
Hole with Cover
Mounting Access
Holes (2)
Optional
Removable
Gear Tray
Door & Lens
Internal
Toolless Fasteners
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Housing Styles – Clamshell
Clamshell Housing features
• One-piece prime grade material housing.
• Corners continuously seam welded and smooth with
no post grinding.
• TGIC polyester powder coat finish, 5-stage pre-treatment,
1,000-hour salt spray tested, 92% reflectance.
Embossed standoffs allow
the most secure fixture
installation without fixture
distortion.
Reversible, concealed
hinging prevents
fixture tampering.
Slope-sided
design maximizes
resistance to
physical abuse.
Fully recessed fasteners
resist gripping/prying and
prevent unauthorized
fixture entry.
Optional removable power
tray with quick disconnects
and fixture housing design
reduces installation and
maintenance time.
Die-formed blade trap
(3/8" minimum depth)
prevents concealment
of weapons and
contraband.
Vertically adjustable,
continuous "Z"- bracket
lens retention system is
secured to housing with
heavy gauge thru-studs 6" maximum spacing.
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Housing Styles – doorframe
DoorFrame Housing features
• One-piece prime grade material housing.
• Corners continuously seam welded and smooth with
no post grinding.
• TGIC polyester powder coat finish, 5-stage pre-treatment,
1,000-hour salt spray tested, 92% reflectance.
•Kenall recommends using security strength caulking material
to reduce risk of contraband storage.
Optional removable power
tray with quick disconnects
and fixture housing design
reduces installation and
maintenance time.
Fully recessed fasteners
resist gripping/prying and
prevent unauthorized
fixture entry.
Vertically adjustable,
continuous "Z"- bracket lens
retention system is
secured to housing with
heavy gauge thru-studs 6" maximum spacing.
Slope-sided
design maximizes
resistance to
physical abuse.
Completely concealed
hinging prevents
fixture tampering.
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
security detention lighting Product Universe
Rec Area
Cells
Sally Port
Corridors
Cafeteria
Washroom
ceiling mount
SSA/SSB/SSC/SSD
Surface/Clamshell
Pages 11, 13, 15, 23, 27-29
SSAT5
Surface/Clamshell
Pages 11, 24
SCA/SCB/SCC/SCD
Surface/Clamshell
Pages 30-33
SDA/SDD
Surface/Hinged Door
Pages 11, 13, 15, 34-35
SDSA
Surface/Hinged Door
Page 25
Cells
Cells
Cells
Cells
Cells
Corridors
Dayroom
Dayroom
Corridors
Dayroom
Corridors
Dayroom
SDSAT5
Surface/Hinged Door
Page 26
PSDT5
Surface/Hinged Door
Page 36
SCT
Surface/Clamshell
Page 38
SCH
Surface/Clamshell
Page 37
Cells
Cells
Cells
Cells
Corridors
Dayroom
RMCA/RMCD
Recessed Grid/Doorframe
Pages 13, 18, 19, 39-40
Dayroom
Corridors
Corridors
Dayroom
PRCT5
Recessed Grid/Clamshell
Pages 15, 18, 19, 41
Dayroom
Corridors
Dayroom
RGA/RGD
Recessed Grid/Clamshell
Pages 18, 46-47
Washroom
Sally Port
Corridors
Dayroom
N548/N1048
Surface/Ceiling or Wall Mount
Pages 17, 20, 75-76
Washroom
Dayroom
Sally Port
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Corridors Dayroom
RCA/RCB/RCC/RCD
Recessed Flange/
Doorframe
Pages 13, 17, 18, 42-45
Corridors Cafeteria
SH524-548/SH824-848/SH1248
Surface/Ceiling or Wall Mount
Pages 20, 77-79
Washroom
Dayroom
Sally Port
WaLL MOUNT
WCU
Surface/Clamshell
Pages 11, 48
Cells
Washroom
WCD
Surface/Clamshell
Page 53
Cells
Washroom
WCH
Surface/Clamshell
Page 49
Cells
Washroom
WDU
Surface/Hinged Door
Page 54
Cells
Washroom
WCBU
Surface/Clamshell
Page 50
Cells
Washroom
WDD
Surface/Hinged Door
Page 55
Cells
Washroom
WCB
Surface/Clamshell
Page 51
Cells
Washroom
WDS
Surface/Clamshell
Page 56
Cells
Washroom
WCT
Surface/Clamshell
Page 52
Cells
Washroom
RFW - Step Light
Recessed Flange
Page 57
Corridor
ceiling squares
SSQA
Surface/Clamshell
Page 60
Corridors Cafeteria
SQCA
Surface/Clamshell
Page 61
Corridors Cafeteria Rec Area
Cells
Corridors Rec Area Dayrooms
RQCA/RQCB/RQCD
Recessed Flange/
Grid Clamshell
Pages 15, 17, 19, 66-68
Washroom Rec Area Dayrooms
RQPA/RQPB
Recessed Flange/
Clamshell
Pages 69-70
Washroom Rec Area Dayrooms
Complementary Products
CORNER MOUNT
CC
Surface/Clamshell
Pages 11, 17, 58
CD
Surface/Hinged Door
Page 59
Cells
Cells
Washroom
SQDA/SQDB/
SQDC/SQDD
Surface/Hinged Door
Page 15, 19, 62-65
WSP/WPP - Wall Plates
Surface & Concrete Pour
Page 71
MMEX
Mighty Mac Exit Sign
Wall/Ceiling Mount
Page 72
METSW/METSU/METDU
Millenium Metrex Exit Signs
Wall/Ceiling Mount
Pages 73-74
Washroom
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Cells
Because of the highly demanding nature of the application, the cell is
the focus of the security detention lighting industry. Cell lighting must
be able to withstand extreme physical abuse, clever entry and concealment attempts, and repeated tampering.
Levels of Security
Because inmates are unsupervised for the majority of their
in-cell time, cells represent the toughest possible environment for lighting fixtures. That’s why Kenall’s maximum
security fixtures incorporate best practices such as fully
recessed fasteners and irretrievable blade traps designed to
effectively resist unauthorized fixture entry and tampering. In
addition, 16,14, or 12-gauge housing construction and a wide
selection of impact resistant lensing materials and thicknesses mean they’ll withstand exceptionally high levels of abuse
at any security level.
Kenall cell fixtures meet or exceed the
ACA requirement of 20 footcandles of
illumination for desk and grooming areas.
INSTALLATION AND MAINTENANCE
Our optional removable gear tray makes Kenall cell lighting fixtures a snap to install and maintain. Using a special,
tamper-proof screwdriver, maintenance personnel can easily
remove the power tray using the quick-connect plug, and
replace the tray with a spare assembly, reducing the amount
of time spent in the cell. Necessary repairs can be completed back in the maintenance shop rather than in the cell.
With Kenall’s effective and efficient housing, removable gear
tray and modular design, installation and maintenance time
is minimized.
RECOMMENDED LIGHT LEVELS
Kenall’s efficient optical systems provide high levels of
uniform lighting that meet or exceed ACA’s required 20
footcandles at the desk and grooming area with a single
ceiling-mounted fixture. If preferred, Kenall also offers wall
and corner mounted fixtures for both overall and localized
cell illumination. Kenall's optional heavy gauge mechanical
and solid state electronic switching devices allow detainees to adjust light output to comfortable levels within ACA
guidelines.
Housing Styles
Two different housing styles are available for cell lighting
applications: clamshell and doorframe. In the clamshell
version, the housing is attached to a baseplate by an internal
hinge that is protected from tampering by an integral blade
trap. It is important to note that the clamshell is not
designed for use with surface conduit or surface caulking.
The doorframe version features a hinged door providing
access to the fixture’s interior and is protected against
tampering by pickproof caulking material (by others).
10
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Recommended cell Fixtures
SSAT5
Ceiling Mount Surface
page 24
SDA
Ceiling Mount Surface
page 34
CC
CORNER Mount Surface
page 58
WCU
Wall Mount Surface Up/Down
page 48
PHOTOMETRICS – TYPICAL CELL
26
23
25
29
32
28
29
34
35
30
30
35
35
30
26
26
23
32
29
35
31
39
34
45 44
38 38
59
41
42
51
51
42
41
49
45
38
41
34
36
31
63
57
59
66
66
59
57
63
58
52
51
46
44
40
54
46
28
43
39
48
44
58 55
52 50
46
46
54
54
61
61
67
67
70
70
70
70
67
66
54
46
61
67
63
51
44
58
59
57
52
47
40
61
24
29
41
36
45
49
51
27 27 25 23
37 36 33 29 24
53 52 46 38 30
74 65 51 39
88 68 49
59
84 60
66 63 57
51
42
41
34
31
38
29
35
AVG
FC
42
44
45
MAX
FC
54
88
70
MIN
FC
31
23
22
AVG/
MIN
1.4:1
1.9:1
2.0:1
MAX/
MIN
1.8:1
3.8:1
3.1:1
26
22
25
28
29
25
25
29
27
24
23
25
24
20
19
19
18
22
22
39
32
41
34
41 42
34 36
33
39
35
31
28
32
29
26
23
26
23
22
22
21
50
45
40
44
38
35
31
33
29
27
26
25
24
23
27
25
20
51
46
54
48
54 55
48 49
56
59
58
53
47
40
35
56
60
58
53
47
27
25
30
39
40
35
43
26
24
29
25
24
30
103
136
53
36
32
24
22
28
33
29
22
26
29
26
23
21
24
24
22
21
22
19
21
18
20
24
22
MIN
FC
28
19
19
26
20 21 23 24
22 25 27 30 33
25 29 35 40 46
35 44 54 65
54 70 90
41
87 11
5
45 51 55
56
48
72
21
25
27
28
24
29
32
33
33
32
30
26
25
28
29
28
33
37 37
38
37
35
33
28
26
30
43
41
38
35
30
28
32
28
32
37
42 42
47
44
41
38
31
29
34
27
35
41
47 46
46
32
30
25
36
39
43
49 48
49
49
49
46
46
42
42
39
39
32
30
35
31
29
35
36
43
47
47
44
41
37
38
35
30
28
32
34
32
30
28
26
34
46
63
33
24
32
31
27
29
26
26
24
27
24
23
25
22
21
23
24
24
21 21 20 20
23 23 24 23 22
26 28 29 29 27
33 36 37 37
45 49 50
36
63 68
41 43 42
39
22
22
20
21
STAT AREA
Desk
Grooming
Room
Cell (WCU Wall Surface 1 Lamp Up, 2 Lamps Down/F32T8)
19
MAX
FC
48
67
49
34
29
MAX/
MIN
1.6:1
3.0:1
2.8:1
11’ x 7’ x 8’ Area
70/70/20 Room Reflectance, .80 LLF (Source: ACA)
Catalog No. CC4-0/0-3-32-EB-1-1/B-1
AVG
FC
38
34
33
25
27
AVG/
MIN
1.3:1
1.7:1
1.9:1
Cell (CC Corner Surface 3 Lamps/F32T8)
STAT AREA
Desk
Grooming
Room
29
35
32
MIN
FC
43
37
32
32
37
36
41
38
44
40
47
41
41
40
54
56
48
48
56
54
47
44
41
37
51
47
42
MAX
FC
71
113
87
23
51 51
AVG
FC
56
65
59
26
48
43
53
47
60 59
63
66
66
63
54
48
59
79
72
76
83
83
76
72
79
73
67
66
61
58
53
69
60
32
57
53
64
59
74 71
67 65
61
61
70
70
77
77
83
83
87
87
87
87
83
83
69
60
77
83
79
66
58
73
75
72
67
61
53
77
57
65
59
40
48
54
48
59
63
65
44 44 41 37
57 56 52 46 40
76 74 68 58 49
99 89 75 60
113 93 73
75
112 86
83 80 74
67
56
54
47
42
50
40
47
46
39
38
43
35
40
32
36
38
11’ x 7’ x 8’ Area
70/70/20 Room Reflectance, .80 LLF (Source: ACA)
Catalog No. SDA4-0/0-3-32-EB-1-1/B-1
11’ x 7’ x 8’ Area
70/70/20 Room Reflectance, .80 LLF (Source: ACA)
Catalog No. SSAT5-0/0-2-54-EB-1-1/B-1
STAT AREA
Desk
Grooming
Room
35
41
44
Cell (SDA Ceiling Surface 3 Lamps/F32T8)
Cell (SSAT5 Ceiling Surface 2 Lamps/F54T5HO)
11’ x 7’ x 8’ Area
70/70/20 Room Reflectance, .80 LLF (Source: ACA)
Catalog No. WCU4-0/0-1/2-32-EB-1-1/9-1
AVG/
MIN
1.4:1
1.7:1
1.7:1
MAX/
MIN
1.7:1
3.5:1
2.6:1
STAT AREA
Desk
Grooming
Room
AVG
FC
44
51
32
MAX
FC
55
136
60
MIN
FC
32
20
18
AVG/
MIN
1.4:1
2.6:1
1.8:1
MAX/
MIN
1.7:1
6.9:1
3.3:1
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
11
Corridors
Whether your corridor project has a security, suspended, metal pan, or
gypsum ceiling, Kenall has a convertible fixture design perfectly suited to
the ceiling type.
INSTALLATION AND MAINTENANCE
Because it works with most ceiling types, Kenall’s convertible
fixture is ideal when a corridor ceiling design has not been
determined or is expected to change in the future.
Kenall’s unique convertible fixture
accommodates a variety of
corridor ceiling types.
LEVELS OF SECURITY
Since corridors are typically supervised, they do not require the
use of maximum security fixtures. Designed to accommodate
a variety of applications, Kenall’s exclusive new convertible
recessed fixture can be specified with a 16-gauge steel housing and .187" to .250" lensing.
RECOMMENDED LIGHT LEVELS
All our recommended corridor fixtures easily produce the 10-20
footcandles recommended by the IES for detention facility
corridor applications.
aesthetics
Due to the reduced security requirements, many minimum
security facilities need not appear as "institutional" as other
correctional facilities. Kenall’s high abuse fixtures may be
used to give common areas a more residential feel in those
applications.
12
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Recommended corridor Fixtures
SSB
Ceiling Mount Surface
page 27
RCA
Ceiling Mount
Recessed flange/grid page 42
SDA
Ceiling Mount Surface
page 34
photometrics – Typical Corridor
20
18
15
13
24
21
17
15
23 27 27
21 23 23
17 19 19
15 16 16
20
18
15
13
18
20
21
23
21 23 23
23 27 27
18
20
13
15
15
17
15 16 16
15
15 16 16
13
17 19 19
15
13
17
17 18 18
14
13
17
20
20 22 22
17
15
19
19
23
23
23 26 26
23 26 26
19
19
Corridor (RMCD Ceiling Recessed 3 Lamps/F32T8)
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog No. RMCD4-FL-0/0-3-32-EB-1-120-1/B-1
STAT AREA
Corridor
AVG
FC
19
MAX
FC
27
MIN
FC
13
AVG/
MIN
1.4:1
MAX/
MIN
2.0:1
AVG/
MIN
1.3:1
MAX/
MIN
1.7:1
AVG/
MIN
1.4:1
MAX/
MIN
1.9:1
23
16
16
20
18
20 21 21
18 19 19
18
16
26
26 28 28
22
21
21
23
23
23 25 25
21
26
16
20
20 21 21
18
23
16
18
18 19 19
16
26 28 28
16
17
17 18 18
16
23 25 25
19
19
19 20 20
17
22
20
22
22 24 24
20
21
22
22
25
25
25 27 27
25 27 27
22
22
Corridor (SSC Ceiling Surface 3 Lamps/F32T8)
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog No. SSC4-0/0-3-32-EB-1-1/9-1
STAT AREA
Corridor
AVG
FC
21
MAX
FC
28
MIN
FC
16
21
17
15
19
17
19 21 21
17 18 18
17
15
21
25
25 28 28
21
19
19
22
22 25 25
19
25
17
19
19 21 21
17
22
15
17
17 18 18
15
25 28 28
15
16
16 18 18
15
22 25 25
16
18
18 20 20
16
21
18
21
21 24 24
18
19
20
20
24
24
24 28 28
24 27 27
20
Corridor (SDA Ceiling Surface 2 Lamps/F54T5HO)
20
RMCD
Ceiling Mount
recessed flange/grid page 40
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog No. SDA4-0/0-2-54-EB-1-120-1/B-1
STAT AREA
Corridor
AVG
FC
21
MAX
FC
28
MIN
FC
15
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
13
Dayroom/Catwalk
Combined catwalks and open dayroom areas call for variations in lighting
fixtures. Ceiling mounted luminaires of the High Abuse category, such as
Kenall’s Millenium Stretch™, often provide sufficient durability for dayroom
use while also avoiding the warm-up time problem of HID systems. Security
level fixtures are appropriate for use on catwalks and similar locations where
fixtures may be accessible to detainees.
RECOMMENDED LIGHT LEVELS
installation and maintenance
A wide selection of Kenall fixtures meet or exceed the 30-50
footcandles recommended by the IES for dayroom applications,
while lighting catwalks to the 10-20 IES-recommended footcandle level is easily achieved with any of Kenall’s security fixtures.
Our security fixtures are also 10% to 15% more efficient than
the industry standard – an important consideration in the design
of any public facility.
Both our high abuse and security fixtures are designed for easy
installation and maintenance. Our security clamshell housing
style fixtures, for example, feature housings keyed on both
sides. Since the baseplate can be installed first, there’s no need
to support the entire fixture weight during installation. Maintenance is particularly easy when you specify Kenall's innovative
removable gear tray that comes complete with electrical quick
connects. In the high abuse category, Millenium Stretch’s IP64
rating ensures the fixture is sealed against moisture and dust,
eliminating maintenance headaches for years to come. Because
it works with most ceiling types, our recessed convertible
fixture is ideal when a dayroom or catwalk ceiling type has not
been determined, or is expected to change in the future.
LEVELS OF SECURITY
Being supervised areas, dayrooms can utilize less severe
looking, ceiling-mounted high abuse fixtures. Because lighting
fixtures for catwalks that overlook dayrooms are more accessible, security category fixtures are recommended.
AESTHETICS
With its sleek, extruded aluminum linear housing, optical
quality lens, and choice of colored joiner pieces, Millenium
Stretch helps de-institutionalize the look of most dayrooms.
And while no fixture appropriate for use in catwalk areas is
designed with aesthetics as a high priority, the expertly
designed mounting details, powder-coated finish, and lack of
visible hardware of Kenall security fixtures make them cleanlooking and unobtrusive.
Recessed security fixtures are an
appropriate choice for catwalk lighting...
...while high abuse lighting, such as our
Millenium Stretch™, can often be used to
de-institutionalize the look of dayrooms.
14
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
80’ x 50’ x 20’ Type Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog Nos. MLHA12-48-F-MW-CP-4-54-PB-2, SSA4-0/0-2-32-EB-1/B-1
80’ x 50’ x 20’ Type Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog Nos. SQDC-0/0-1-150IND-EB-1-120-1/C-1, SSA4-0/0-2-32-EB-1/B-1
STAT AREA
Dayroom
Catwalk
STAT AREA
Dayroom
Catwalk
AVG
FC
47
13
MAX
FC
50
19
MIN
FC
37
10
AVG/
MIN
1.3:1
1.3:1
MAX/
MIN
1.4:1
2.0:1
AVG
FC
40
10
41
41
40
40
40
41
41
41
43
41
43
40
MAX
FC
43
14
38
40
MIN
FC
33
8
AVG/
MIN
1.2:1
1.4:1
35
34
35
40
39
40
41
38
35
41
40
40
41
35
41
42
42
36
41
42
42
35
41
42
42
42
42
42
41
41
42
42
41
41
42
42
42
42
43
35
35
40
41
41
41
41
41
40
40
40
40
40
40
41
41
41
41
41
41
33
39
40
40
40
40
40
39
39
40
40
40
39
40
40
40
40
40
40
34
39
34
40
40
40
41
40
40
40
40
40
40
40
40
40
40
41
41
40
40
35
41
41
42
43
41
42
42
41
42
42
41
42
42
41
43
42
41
41
35
42
41
34
48
48
33
38
37
40
40
38
40
40
38
40
40
38
40
40
38
40
40
37
38
33
40
45
44
AVG/
MIN
1.5:1
1.3:1
33
41
40
41
42
37
42
42
42
41
41
42
42
41
41
42
42
42
43
43
35
42
41
47
48
48
47
MIN
FC
33
8
40
42
42
42
36
42
41
48
48
50
48
MAX
FC
54
16
41
41
42
42
41
41
42
42
42
42
43
42
35
42
41
50
49
48
45
40
39
46
36
50
49
50
44
45
41
51
47
45
50
51
52
47
45
51
46
46
52
50
47
45
49
51
50
46
44
49
44
46
47
41
49
45
37
57
52
45
56
51
33
55
53
40
48
55
45
53
56
56
54
54
51
54
54
53
49
38
45
47
50
50
50
51
52
51
52
51
51
52
51
50
50
49
48
45
37
44
53
51
50
48
48
49
50
51
37
44
48
50
50
38
45
48
51
51
52
53
52
52
53
53
52
53
53
52
52
53
53
52
52
52
51
50
53
51
50
51
49
48
52
38
45
37
51
60
60
57
55
48
57
57
56
54
54
56
57
57
56
55
57
59
59
45
46
55
54
52
50
48
52
51
50
48
47
48
47
50
51
51
51
50
51
53
47
47
49
49
48
48
49
51
45
54
49
38
45
49
51
52
53
54
54
54
54
54
54
54
54
53
52
52
50
46
38
50
59
59
56
54
49
56
55
54
52
52
54
55
55
55
53
55
57
58
45
38
45
49
51
52
52
53
54
54
53
53
54
54
53
53
52
52
50
46
39
46
55
54
51
49
49
50
50
49
47
47
49
50
50
49
49
51
53
54
49
38
45
49
51
52
53
54
54
54
54
54
54
54
54
53
52
52
50
46
38
50
59
58
56
54
49
55
55
54
52
52
54
55
55
55
53
55
57
58
51
38
45
48
51
51
52
53
53
53
53
53
53
53
53
52
51
51
49
45
38
51
60
60
57
55
57
57
57
56
54
54
56
57
57
56
55
57
59
59
45
37
44
48
50
50
51
52
52
52
52
52
52
52
52
51
50
50
48
45
37
46
55
54
52
50
51
51
51
50
48
48
50
51
51
50
49
51
53
54
43
38
44
47
50
50
50
51
52
51
51
51
51
52
51
50
50
49
48
45
37
44
53
51
49
48
48
49
49
47
47
47
47
49
49
48
48
49
50
52
48
39
45
47
50
50
49
51
51
50
52
52
50
52
51
49
50
49
47
45
37
48
57
55
55
55
54
55
55
53
54
54
53
55
55
54
54
55
55
56
45
36
41
41
45
45
44
47
47
45
48
47
45
48
46
44
46
44
42
41
34
46
53
51
53
53
51
54
55
51
53
53
51
55
54
51
53
53
51
52
MLHA1248
Ceiling Mount Surface
millenium stretch™
41
40
40
40
40
40
41
41
43
38
40
41
41
40
40
41
41
43
43
41
40
40
41
41
41
41
41
41
35
41
50
50
50
48
45
47
AVG
FC
48
11
41
40
40
41
40
43
41
40
38
40
40
41
41
41
40
41
43
40
43
41
41
43
40
38
41
41
41
37
40
34
40
35
40
41
48
50
50
50
48
49
47
48
47
47
Dayroom (MLHA1248 Ceiling Surface 4 Lamps/F54T5HO;
SSA Ceiling Surface 2 Lamps/F32T8)
41
42
40
48
48
49
50
50
48
48
MAX/
MIN
1.4:1
2.1:1
35
48
45
48
48
48
49
STAT AREA
Dayroom
Catwalk
AVG/
MIN
1.2:1
1.3:1
42
48
44
48
48
49
49
49
48
54
53
43
52
Dayroom (PRCT5 Ceiling Recessed 6 Lamps/F54T5HO;
SSA Ceiling Surface 2 Lamps/F32T8)
33
50
47
48
47
48
50
47
48
46
47
STAT AREA
Dayroom
Catwalk
MIN
FC
43
10
48
49
49
48
47
48
48
47
47
56
53
54
51
54
55
53
56
55
52
51
55
51
54
48
57
45
52
SSA
Ceiling Mount Surface
page 23
38
48
49
45
49
45
48
47
47
49
47
48
80’ x 50’ x 20’ Type Area
80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)
Catalog Nos. RQCD-1/1-1-400M-DT-A/1-1, SDA4-0/0-2-32-EB-1/B-1
MAX
FC
61
22
47
48
49
48
48
49
47
48
47
50
47
47
48
49
47
48
48
48
47
47
49
50
47
47
47
47
47
48
45
47
47
46
47
47
47
49
46
48
50
47
46
48
48
44
48
49
37
45
39
48
48
47
47
47
48
47
48
47
48
48
48
48
48
48
49
47
40
47
39
47
40
48
PRCT5
Ceiling Mount Recessed
T5, T5HO LAMPS page 41
48
49
49
47
48
48
48
49
49
49
50
50
48
47
48
45
41
50
49
47
49
47
47
49
47
49
50
47
48
48
48
48
48
47
47
47
47
49
49
49
49
48
49
49
48
47
48
50
50
48
48
48
50
50
49
48
47
41
50
41
50
40
48
39
48
80’ x 50’ x 20’ Type Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog Nos. PRCT5-0/0-6-54-PB-2-1/B-1, SSA4-0/0-2-32-EB-1-1/B-1
AVG
FC
52
14
48
48
47
50
48
48
46
48
48
49
48
50
48
49
48
49
46
46
48
48
44
47
40
48
40
48
37
44
Recommended dayroom Fixtures
SQDC
Ceiling Mount Surface
HID/Induction page 64
photometrics – Typical Dayroom
Dayroom (RQCD Ceiling Squares Recessed 1 Lamp/400 Watt MH;
SDA Ceiling Surface 2 Lamps/F32T8)
MAX/
MIN
1.6:1
1.9:1
Dayroom (SQDC Ceiling Squares Surface 1 Lamp/150 Induction;
SSA Ceiling Surface 2 Lamps/F32T8)
MAX/
MIN
1.3:1
1.9:1
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
15
Washroom
Kenall meets challenging washroom lighting requirements with fixtures
that are safe, secure, and impervious to the rust and corrosion typically
caused by washroom moisture.
INSTALLATION AND MAINTENANCE
Due to the regular exposure of washroom lighting to moisture,
maintenance can be an ongoing and expensive issue if fixtures
aren’t properly designed for use in wet environments. Specified as “Wet Location Listed,” Kenall’s stainless steel security
fixtures are resistant to the rust and corrosion that results in
excessive maintenance and replacement.
Wet Location Listed (WL option)
Kenall security fixtures resist the rust
and corrosion-causing conditions
present in institutional washrooms.
LEVELS OF SECURITY
Since light fixtures may be accessible to detainees in unsupervised washrooms, security level fixtures are recommended.
Kenall offers medium and maximum security ceiling and corner
mounted security-classification fixtures, both of which deliver
unsurpassed quality and durability for washroom applications.
RECOMMENDED LIGHT LEVELS
The IES recommends 10 footcandles for shower areas and 20
footcandles at the mirrors – levels easily achieved with Kenall’s
washroom-recommended fixtures. Corner mount fixtures
are typically used over mirrors at sink locations while ceilingmounted fixtures are typically applied in shower areas.
Housing Styles
Most security detention washroom fixtures use the doorframe
housing style. The doorframe version provides access to the
fixture’s interior by means of a hinged door and is protected
against tampering by pickproof caulking material (by others).
The doorframe style is also available with a Wet Location
listing.
aesthetics
With their stainless steel construction and powder coat
finishes, Kenall’s recommended washroom fixtures won’t
suffer from the moisture-related problems that make most
security detention fixtures look old and need replacement
before their time.
16
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
STAT AREA
Entry
Sink
Shower & General Area
AVG
FC
20
33
32
27
27
28
34
32 31 27
33 31 28
43 37 34
41
42
51
40 39 38
42 41 40
49 48 47
36
35 43
33 31 28
23
24
23
23
23
27
26 24
26 24
26 24
27 25
33 31
27
26
26
28
34
28
27
27
28
35
24
24 23
25 24
26
27
27
21
22 21
24
26
28
16
19
21 19
21 19
25
22
29 28 25
MAX
FC
24
51
65
MAX
FC
22
41
51
28 29
31 35
26 27
28
27
32 31 27
31 31 27
42
40 38 37
40 38 37
33
35 35
27 28
41
27
32 32 27
32 32 27
41
40 38 36
34 34
22 24
42
27
32 32 27
39
39 38 37
33
40 37 33
37 34 31
27
28
30
40 37 34
41 38 34
26
29
32
35 33 30
38 36 33
AVG
FC
22
42
42
40 38 36
29
27
33 33 29
33 32 27
40
39
37 37 36
38 37 37
32 32
23 32
24 25
20 22
31
29 27 25
32 30 28
STAT AREA
Entry
Sink
Shower & General Area
27 33
32
34 34 32
39
36 36 36
29
32
33
35
33
33
34
35
31
33
32
29
31
35
25
26
47 43 43
52 48 47
35
45 43
43 41 42
45 42 42
39 36
36 36
42 42
37 37
44 49
43 41 42
43 41 42
27
32 33
32 31
45 42 45
44 42 44
33
39 34
40 40
47 45 46
46 43 45
39 36
34 34
37 38
54 54 46
63 65 57
43
53 52 42
53 52 43
42
42
48
54 54 41
54 53 42
43
42
55 53 40
54 54 41
45
44
56 55 46
55 54 40
47
46
55 55 49
32 33
53 54 50
47
47 46 46
32
51
47 47 46
35 37
36 36
51 51 47
48 46 48
48 47 46
46 47 48
32
41 39
40 41
50
43
40 42 42
49
40
32 36 38
56
47
44
43
43
42
41
40
40
43
49
46
47
46
44
37
29 33 35
44 44 44
34
28 30 32
45
30
25 27 28
43 45 45
21
23
23
23
21
25 31
22
24
24
23
22
19 22
21
22
22
24
23
24
22
23
21
22
50 46 41
45 42
56 53
46
57
47
41 40
42 40
43
43
43
44
57
41 39
42 40
42
43
43
43
39 37
40 39
40
41
40
42
35 31
37 36
45
39
39
38
38
38
38
37
35
30
37 35 31
43 40 35
47 44 39
41
35
42
50 48 42
51 48 42
39
40
43
45 43 38
49 46 41
42
43
37 35 31
42 40 35
39
43
42
42
45
42
41
46
39
38
42
36
36
44
30
31
CC
Corner Mount Surface
page 58
30 31
34
37 35 34
39
36 36 36
24 31
36
22 23
37
39 36 35
36 36 37
39 38 37
35 36 38
26
30 30
23 24
39
37
36 38 37
39
35
32 35 35
37
34
30 32 33
38 38 37
31
28 30 31
37
27
24 26 26
32 34 37
18
20
21
20
18
18 25
19
21
22
21
19
14 15
18
19
20
21
21
22
20
21
18
RCA
Ceiling Mount
Recessed Flange page 42
19
Recommended washroom Fixtures
N1048
Ceiling Mount Surface
NOVA™ page 76
N548
Ceiling Mount Surface
NOVA™ page 75
photometrics – Typical Washroom
Washroom (RQCA Ceiling Squares Recessed 1 Lamp/42 Watt PLT;
CC Corner Surface 2 Lamp/F32T8)
20’ x 15’ x 9’ Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog Nos. RQCA-0/0-1-42P-EB-1-1/B-1, CC-0/0-2-32-EB-1-1/B-1
MIN
FC
21
31
19
Washroom (N1048 Ceiling Surface 2 Lamps/F32T8,
N548 Ceiling Surface 1 Lamp/F32T8)
20’ x 15’ x 9’ Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog Nos. N1048-C-2-32-EB/1-120, N548-C-1-32-EB-1-1R
MIN
FC
18
25
14
AVG/
MIN
1.1:1
1.4:1
2.2:1
MAX/
MIN
1.2:1
1.7:1
3.4:1
AVG/
MIN
1.1:1
1.3:1
2.3:1
MAX/
MIN
1.2:1
1.6:1
3.7:1
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
17
Cafeteria
Only Kenall offers maximum security detention lighting fixtures listed
with the National Sanitation Foundation (NSF). Designed for use in
food preparation, serving, and dining areas, NSF-listed security detention lighting meets the toughest safety standards while providing the
security necessary for cafeteria use.
Levels of Security
Kenall's National Sanitation Foundation listing
assures that security detention lighting fixtures
specified with this option are toxic-free, corrosion
resistant, and easy to clean.
When specified with the NSF-listed option (SN),
our security fixtures provide unmatched safety and
security for cafeterias and food preparation areas.
recommended Lighting levels
The IES recommends a minimum of 5-10 footcandles average illumination for institutional eating
areas and 50-100 footcandles for institutional
kitchens. Kenall’s ceiling mounted maximum security fixtures can easily meet these recommended
levels. Kenall security fixtures are also 10% to
15% more efficient than the industry standard
– an important consideration in the design of any
public facility.
photometrics – Typical CAFETERIA
installation and maintenance
30
36
34
29
40
50
44
35
51
63
55
42
56
71
61
46
52
66
58
45
45
56
51
41
39
48
45
38
39
48
45
39
45
56
51
42
58
73
63
49
45
56
52
42
39
48
46
39
54
67
59
46
53
66
57
43
42
51
46
36
57
72
62
47
45
56
51
42
39
48
46
39
54
68
59
47
54
68
59
46
35 34
46 42
60 52
68 57
35 36
46 48
60 64
68 73
32 34
39 42
46 52
49 57
33 32
42 39
52 46
57 49
34 34
46 45
62 59
72 68
29 32
37 43
47 57
52 66
32 32
39 39
46 46
48 48
33 34
41 45
51 58
56 66
22 20
22 20
34 31 28 24
45 42 36 30
61 55 45 35
71 64 50 37
45 36
36 30
28 25
45 45 42
34 34 32
26 26 24
26 26 25
39 39 41
32 32 33
26 26 26
26 26 26
48 46 42
37 36 34
28 28 27
28 28 27
39 42 46
32 34 36
27 27 28
27 27 28
45 42 39
35 33 32
27 27 26
27 27 26
37 43 46
30 33 35
23 25 26
23 25 26
51 38
41 31
50 37
67 71 64
53 57 51
67 71 64
59 61 56
49 49 57
40 39 45
49 48 56
47 46 52
74 69 57
59 55 46
74 68 57
64 60 52
49 57 69
40 46 54
49 57 68
47 53 60
68 57 49
54 46 40
68 57 49
59 52 47
53 67 72
43 54 58
52 67 73
47 58 62
27 27
33 34
41 45
52 59
27 26
32 32
39 39
47 46
28 27
36 34
47 42
61 53
28 29
36 37
47 48
60 64
27 27
33 34
39 43
47 53
27 27
34 33
42 39
52 47
27 27
35 35
46 46
63 60
23 25
29 33
37 43
47 58
47 46 52
39 39 41
32 32 35
27 26 27
64 60 53
48 46 42
37 36 34
28 28 27
47 53 60
39 42 46
33 34 36
27 27 28
60 52 47
45 42 39
35 33 33
27 27 27
47 58 62
37 43 46
29 33 35
23 25 26
28 25
23 21
26 25 23 21
34 32 28 25
46 42 36 30
61 56 46 36
59 61 56
45 45 42
34 34 32
27 26 25
46 46 52
49 48 56
40 39 45
49 49 56
64 60 52
74 68 57
59 55 46
74 69 57
47 53 60
49 57 68
40 46 54
49 57 69
60 52 47
68 57 49
54 46 40
68 57 49
47 58 62
52 66 72
43 54 58
52 67 73
50 37
45 36
36 30
59 61 56
67 71 64
53 57 51
67 71 64
26 26 26
26 26 26
32 32 33
39 39 41
28 28 27
28 28 27
36 36 34
48 47 42
27 27 28
27 27 28
32 34 36
39 42 46
27 27 26
27 27 26
35 33 32
46 42 39
23 25 26
23 25 26
30 33 34
37 43 46
45 36
51 37
41 31
36 30
28 24
26 26 24 22 20
26 26 24 22 20
34 34 32 28 25
45 46 42 36 30
40 30
50 37
45 35
66 71 64
58 61 55
44 45 42
34 34 31
48 48 56
46 46 51
39 39 41
32 32 33
73 68 57
64 60 52
48 46 42
36 35 33
48 57 68
46 52 60
39 42 46
32 34 35
68 56 48
59 52 46
45 42 39
34 33 32
52 66 72
47 57 62
37 43 46
29 32 34
35 29
44 34
50 36
45 46 42
58 61 55
66 70 63
52 56 51
38 38 41
45 45 51
48 48 56
39 39 45
49 47 42
63 59 51
73 68 56
58 54 45
39 42 47
46 51 59
48 56 68
39 45 54
A typical cafeteria uses the doorframe housing
style. The doorframe version features a hinged
door providing access to the fixture’s interior and
is protected against tampering by pickproof caulking material (by others).
46 42 39
59 51 45
67 56 48
54 45 39
Housing Styles
Cafeteria (PRCT5 Ceiling Recessed 4 Lamps/F54T5HO)
36 43 47
45 57 62
51 66 72
42 53 57
Kenall’s optional Removable Gear Tray means that
any servicing of our maximum security fixtures
can be performed in just a matter of minutes.
Specifying the NSF Splash Non-Food Zone (SN)
option ensures unmatched ease of cleanability.
80’ x 40’ x 10’ Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog No. PRCT5-0/0-4-54-PB-2-1/B-1
STAT AREA
Cafeteria
AVG
FC
44
MAX
FC
74
MIN
FC
20
AVG/
MIN
2.2:1
MAX/
MIN
3.6:1
Recommended cafeteria Fixtures
PRCT5
Ceiling Mount Recessed
T5, T5HO LAMPS page 41
18
RCA
Ceiling Mount
Recessed Flange page 42
RGD
Ceiling Mount
Recessed flange page 47
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
RMCD
Ceiling Mount
recessed flange/grid page 40
Recreation Area
Kenall makes fixtures for indoor recreation areas of all ceiling heights.
For high ceiling applications where fixture accessibility is not an issue,
our high abuse fixtures present an economical, durable, and attractive
lighting solution. In lower ceiling facilities where fixtures are accessible
to detainees, our security detention fixtures provide appropriate illumination without fear of tampering or breakage.
Levels of Security
High abuse lighting can be used effectively in high
ceiling applications, while security-rated fixtures are
necessary for low ceiling areas where lighting may be
accessible to detainees. In both cases, Kenall offers
fixtures that do the job effectively, economically, and
in the case of our high abuse Millenium™ fixtures,
attractively.
recommended Lighting levels
With a variety of lamp and ballast options to choose
from, meeting the IES recommendation for 30 footcandles in recreation area applications won’t present a
problem when you specify Kenall – whether your application calls for high abuse or security-type luminaires.
installation and maintenance
Kenall's fixtures are easy to install and require little
maintenance. Both high abuse Millenium and security-grade fixtures are designed for fast, trouble-free
installation, with high quality housings, impact-resistant
lenses and long-life lamps and ballasts that ensure
minimal maintenance requirements – especially important considerations in high-ceiling applications where
fixture inaccessibility can otherwise be a problem.
Even though detention
facility recreation areas are typically
well supervised, lighting fixtures must
be able to withstand the abuse typical of
normal gym activities.
photometrics – Typical Recreation Area
Recreation (RQCD Ceiling Squares Recessed 1 Lamp/320 Watt MH)
21
23
24
26
27
28
28
29
29
29
29
29
29
28
28
27
26
24
23
21
Housing Styles
Our ceiling-mounted security fixtures are available
in clamshell and doorframe housing configurations.
High abuse fixtures come in a variety of housing
shapes and sizes.
22
24
26
28
29
30
31
31
31
31
31
31
31
30
30
29
28
26
24
22
23
26
28
29
31
32
32
33
33
33
33
33
33
32
31
31
29
28
26
23
25
27
29
31
32
33
34
34
34
34
34
34
34
34
33
32
31
29
27
25
26
28
30
32
33
34
35
35
35
35
35
35
35
35
34
33
32
30
28
26
26
29
31
33
34
35
36
36
36
36
36
36
36
36
35
34
33
31
29
26
27
30
32
33
35
36
37
37
37
37
37
37
37
37
36
35
33
31
29
27
28
30
32
34
35
36
37
38
38
38
38
38
38
37
36
35
34
32
30
28
28
30
32
34
36
37
38
38
38
38
38
38
38
38
37
35
34
32
30
28
29
31
33
35
36
37
38
38
38
39
39
38
38
38
37
36
34
33
31
29
28
31
33
35
36
37
38
38
39
39
39
39
38
38
37
36
35
33
31
29
29
31
33
35
36
37
38
39
39
39
39
39
39
38
37
36
35
33
31
29
29
31
33
35
36
38
38
39
39
39
39
39
39
38
37
36
35
33
31
29
29
31
33
35
36
38
38
39
39
39
39
39
39
38
38
36
35
33
31
29
29
31
33
35
36
38
39
39
39
39
39
39
39
38
38
36
35
33
31
29
29
31
33
35
36
38
39
39
39
39
39
39
39
38
38
36
35
33
31
29
29
31
33
35
36
38
38
39
39
39
39
39
39
38
37
36
35
33
31
29
29
31
33
35
36
37
38
39
39
39
39
39
39
38
37
36
35
33
31
29
29
31
33
35
36
37
38
39
39
39
39
39
39
38
37
36
35
33
31
28
28
31
33
35
36
37
38
38
39
39
39
39
38
38
37
36
35
33
31
28
29
31
33
35
36
37
38
38
38
38
38
38
38
38
37
36
34
33
30
28
28
30
32
34
36
37
38
38
38
38
38
38
38
37
37
35
34
32
30
28
28
30
32
34
35
36
37
37
38
38
38
38
37
37
36
35
34
32
29
27
27
30
32
33
35
36
37
37
37
37
37
37
37
36
36
34
33
31
29
27
26
29
31
33
34
35
36
36
36
36
36
36
36
36
35
34
33
31
29
26
26
28
30
32
33
34
35
35
35
35
35
35
35
35
34
33
32
30
28
26
25
27
29
31
32
33
34
34
34
34
34
34
34
34
33
32
31
29
27
25
24
26
28
30
31
32
32
33
33
33
33
33
33
32
32
31
30
28
26
24
22
25
26
28
29
30
31
31
31
31
31
31
31
31
30
29
28
26
24
22
21
23
25
26
27
28
29
29
29
29
29
29
29
29
28
27
26
25
23
21
40’ x 60’ x 20’ Area
80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)
Catalog No. RQCD-1/1-1-320M-MH-A/1-1
STAT AREA
Recreation
AVG
FC
33
MAX
FC
39
MIN
FC
21
AVG/
MIN
1.6:1
MAX/
MIN
1.9:1
Recommended recreation area Fixtures
SQDC
Ceiling Mount Surface
page 64
RMCD
Ceiling Mount Recessed
T8 LAMPS page 40
PRCT5
Ceiling Mount Recessed
T5, T5HO LAMPS page 41
MLHA1248
Ceiling Mount Surface
millenium stretch™
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
19
Sally Port
Proper lighting is key to ensuring effective staff performance of important
processing-area duties. Being secured and supervised areas, sally ports are
excellent applications for Kenall’s high-performance, high abuse fixtures.
Levels of Security
Kenall's institutional fixtures deliver
the high lighting quality appropriate
for secured processing areas.
Institutional high abuse fixtures are perfectly suited
to secured and staffed areas such as sally ports and
other detention facility processing areas.
recommended Lighting levels
The IES recommendation for a minimum of five
footcandles is easily surpassed with Kenall’s wall or
ceiling-mounted fixtures.
installation and maintenance
Kenall high abuse lighting is designed for fast
installation, while routine maintenance couldn’t
be easier. In the highly unlikely event of a fixture
problem, our entire high abuse family of luminaires
is covered by Kenall’s exclusive Peace of Mind
Lifetime Guarantee™.
photometrics – Typical Sally Port
18
19
19
20
20
20
20
20
19
19
21
22
22
23
23
23
23
23
22
22
21
19
18
25 25 25 24 25 25 25 25 23
26 26 25 26 26 26 26 26 24
27 27 26 26 26 27 27 26 25
28 27 27 26 27 27 28 27 25
28 28 27 27 27 28 28 28 26
28 28 27 27 27 28 28 28 26
28 27 27 26 27 27 28 27 25
28 27 25
27 26 25
26 26 24
25 25 23
24 23 23 23 23 23 24 23 22
21 21 21 21 21 21 21 21 20
16
17
19
24 23 23 23 23 23 24 23 22
26
25
23
21
24
23
22
20
18 21
17 19
16 18
28 27 27
27 27 26
26 26 26
25 25 25
27
27
25
25
20 23
19 22
19 22
27
25
20 23
28
26
20 23
28
26
20 23
27
25
20 23
27
25
19 22
26
24
19 22
25
23
18 21
26 27 27
26 26 27
25 26 26
24 25 25
16
18
21 21 21 21 21 21 21 21 20
23
21
22
By using only the best housing materials powder
coated with high quality polyurethane, Kenall fixtures
keep their as-new appearance for years – even with
minimum maintenance.
20
aesthetics
17 19
Kenall’s institutional high abuse fixtures are Wet
Location listed and our architectural high abuse
lighting fixtures are both Wet Location listed and
IP64 rated.
16 18
housing styles
18
17
Sally Port (N1048 Ceiling Surface 4 Lamps/F32T8)
30’ x 30’ x 15’ Area
80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)
Catalog No. N1048-C-4-32-EB-1
STAT AREA
Sally Port
AVG
FC
24
MAX
FC
28
MIN
FC
16
Recommended sally port Fixtures
N1048
Ceiling Mount Surface
Nova™ page 76
20
SH848
Ceiling Mount Surface
Sheriff™ page 78
MLHA1248
Ceiling Mount Surface
millenium stretch™
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
AVG/
MIN
1.5:1
MAX/
MIN
1.8:1
Building Mounted
Correctional facilities need to blend in with – and even
complement – local architectural environments. That’s why
Kenall’s uniquely attractive and durable Millenium™ fixtures
are the perfect choice for exterior wall applications.
AESTHETICS
Correctional facilities are often located in urban areas
that require aesthetic sensitivity. Exterior lighting
fixtures must blend in with and complement the
surrounding architectural design, while eliminating
nuisance issues such as light trespass and glare.
Kenall offers a complete line of architecturally pleasing
luminaires that are guaranteed against breakage for the
lifetime of the installation.
Millenium™ adds architectural style and flair to
any building exterior, while being tough enough
to take the worst abuse people and nature can
dish out.
LEVELS OF SECURITY
In order to work effectively night after night, buildingmounted fixtures need to successfully resist physical
abuse and harsh environmental conditions. Kenall’s
Millenium™ high abuse fixtures are unsurpassed in
their ability to withstand both.
photometrics – Typical Building Exterior
Building Mounted (MR17WP Wall Surface 1 Lamp/150 Watt MH;
MR17RP Ceiling Surface 1 Lamp/100 Watt MH;
FS818RD Wall Surface 1 Lamp/50 Watt MH)
9
9
8
8
7
6
9
6
8
5
5
7
4
4
3
4
2
3
4
4
6
6
2
3
5
6
5
6
4
4
5
4
3
2
3
3
2
6
6
6
6
9
6
5
6
6
5
4
5
5
5
4
6
4
4
4
3
6
8
8
7
6
6
5
6
5
3
4
4
7
8
4
3
5
5
7
8
8
7
9
8
8
9
10
9
8
11
9
8
7
6
6
5
4
3
3
4
8
9
6
4
3
3
11
12
12
9
11
8
8
6
7
5
5
4
3
3
4
7
6
5
4
3
3
3
8
8
9
9
8
6
4
11
11
9
9
9
11
10
9
8
8
9
8
8
5
5
3
8
8
7
6
4
4
7
8
7
8
6
9
6
6
3
4
4
4
5
5
7
5
6
5
6
5
6
4
4
6
4
3
4
5
7
7
5
6
6
7
5
5
5
5
8
2
5
6
4
3
4
8
5
3
4
5
4
3
3
4
7
6
9
6
INSTALLATION AND MAINTENANCE
All Kenall architectural high abuse fixtures are
designed for easy installation. And when it comes to
ease of maintenance, no other fixtures even come
close. Millenium’s UL IP64 rating means dirt, bugs,
moisture, and environmental debris can’t get in.
Millenium’s corrosion resistant construction – diecast
marine-grade aluminum baseplates and stainless
steel hardware – are the finest components you’ll
find anywhere.
11
6
With their advanced optical systems, Millenium fixtures
can easily meet exterior illumination requirements
– even in widely-spaced layouts – without creating the
unattractive, uncomfortable glare all too common in
high abuse fixtures.
4
RECOMMENDED LIGHT LEVELS
100’ x 100’ Area, .72 LLF (Source: IESNA Handbook)
Catalog Nos. MR17WP-C-MW-150M-1, MR17RP-C-MW-100M-1,
FS818RD-0-PIA-MW-50M-1
AVG
STAT AREA
FC
Building Exterior 5
MAX
FC
9
MIN
FC
2
AVG/
MIN
2.1:1
MAX/
MIN
3.9:1
Recommended building mounted Fixtures
Wall Mount Surface
millenium high abuse™
Wall Mount Surface
millenium freescale™
Full cutoff/Wall Mount Surface
millenium finite™
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
21
specification pages – table of contents
Security Detention Area Lighting: Mighty Mac™
Ceiling - Surface Mount
Linear Fluorescent
SSA..................................23
SSAT5..............................24
SDSA...............................25
SDSAT5...........................26
SSB..................................27
SSC . ...............................28
SSD..................................29
SCA ................................30
SCB ................................31
SCC ................................32
SCD ............................... 33
SDA ............................... 34
SDD................................ 35
PSDT5..............................36
SCH ............................... 37
SCT ................................ 38
Ceiling - Recessed Adaptable
Linear Fluorescent
RMCA ........................... 39
RMCD . ...........................40
PRCT5..............................41
Ceiling - Recessed Flange
Linear Fluorescent
RCA ............................... 42
RCB ............................... 43
RCC ................................44
RCD ............................... 45
Ceiling - Recessed Grid
Linear Fluorescent
RGA .............................. 46
RGD .............................. 47
Wall - Surface Mount
Linear Fluorescent
WCU............................... 48
WCH .............................. 49
WCBU ........................... 50
WCB............................... 51
WCT................................ 52
WCD .............................. 53
WDU . ............................ 54
WDD............................... 55
WDS .............................. 56
Wall Recessed Concrete Pour
Compact Fluorescent
RFW .............................. 57
22
Corner Mount
Linear Fluorescent
CC . .............................. 58
CD ................................ 59
Ceiling Squares - Surface
Compact Fluorescent & HID
SSQA.............................. 60
SQCA . .......................... 61
SQDA ............................ 62
SQDB ............................ 63
SQDC ............................ 64
SQDD ............................ 65
Ceiling Squares Recessed Flange
Compact Fluorescent & HID
RQCA ........................... 66
RQCB ............................ 67
RQCD ............................ 68
Ceiling Squares Concrete Pour
Compact Fluorescent & HID
RQPA ..............................69
RQPB.............................. 70
Complementary Product –
Wall Plates
Surface & Concrete Pour
(1,2 and 3-Gang)
WSP/WPP........................71
Exit Signs
Mighty Mac™ LED
MMEX............................ 72
Millenium Metrex™ LED
METSW.......................... 73
METSU/METDU..............74
Institutional High Abuse
Nova™ & Sheriff™
N548................................75
N1048..............................76
SH524 & SH548..............77
SH824 & SH848..............78
SH1248............................79
Alpha Numeric Index
CC . .............................. 58
CD ................................ 59
METDU............................74
METSU............................74
METSW...........................73
MMEX.............................72
N548................................75
N1048..............................76
PRCT5..............................41
PSDT5..............................36
RCA ............................... 42
RCB ............................... 43
RCC ................................44
RCD ............................... 45
RFW .............................. 57
RGA .............................. 46
RGD .............................. 47
RMCA ........................... 39
RMCD . ...........................40
RQCA ........................... 66
RQCB ............................ 67
RQCD ............................ 68
RQPA ..............................69
RQPB.............................. 70
SCA ................................30
SCB ................................31
SCC ................................32
SCD ............................... 33
SCH ............................... 37
SCT ................................ 38
SDA ............................... 34
SDD................................ 35
SDSA...............................25
SDSAT5...........................26
SH524 & SH548..............77
SH824 & SH848..............78
SH1248............................79
SQCA . .......................... 61
SQDA ............................ 62
SQDB ............................ 63
SQDC ............................ 64
SQDD ............................ 65
SSA..................................23
SSAT5..............................24
SSB..................................27
SSC . ...............................28
SSD..................................29
SSQA.............................. 60
WCB............................... 51
WCBU ........................... 50
WCD .............................. 53
WCH .............................. 49
WCT................................ 52
WCU............................... 48
WDD............................... 55
WDS .............................. 56
WDU . ............................ 54
WSP/WPP........................71
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Mighty Mac®
SSA SERIES
Ceiling Mount SURFACE
HINGED CLAMSHELL
Lamps: Biax, T8, T5, T5HO
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
Lens RETENTION: Vertically adjustable continuous “Z" brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SSA4-0/0-232IS-1-120-1/B-1 = 67.2%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" embossed mounting holes
2.00" dia. Wiring hole
(4) .62" embossed mounting holes
2.00" dia. Wiring hole
13.00"
(330mm)
7.00"
3.50"
7.00"
13.00"”
13.00"
(178mm) (330mm)
(178mm) (330mm)
(89mm)
22.00"
23.00"
(559mm)
(584mm)
25.50"
49.50"
(648mm)
(1257mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SSA
Nominal Size
2 12" x 24"
4 12" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
3 Three
* Not available as Base Material
• Not available with F54T5HO
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1Lamp Max.)
40B F40TT (2 Lamp Max.)
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1
One
Two
2
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
(2 Lamp Max. w/ F54T5HO)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
23
Mighty Mac®
SSAT5 SERIES
Ceiling Mount Surface
HINGED CLAMSHELL
Lamps: T5, T5HO
Size: Nominal 12" x 48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
HOUSING: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
BASEPLATE: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband concealment and access. Embossed
standoffs prevent distortion.
HINGE: Completely concealed internal piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
LENS: As specified - maximum total thickness
.500" - see ordering information.
LENS RETENTION: Vertically adjustable “Z”
brackets - prime grade material. Secured to
housing via thru-studs.
BALLAST: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Standard removable reflector/lamp/ballast tray with quick disconnect.
LUMINOUS SEAL: Polyurethane foam prevents light leaks from luminaire base.
FASTENERS: Hardened security screws as
specified - see ordering information. Fully
recessed.
FINISH: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
LISTINGS: UL listed for damp locations. See
ordering information for wet location applications.
INSTALLATION: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: For photometric information, go to www.kenall.com.
LAMPS: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" Embossed Mounting Holes
2.00" Dia. Wiring Hole
11.250"
(286mm)
6.00"
2.750"
11.25"
(182mm) (286mm)
(70mm)
46.00"
(1168mm)
49.50"
(1256mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SSAT5
Nominal Size
4 12" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
Lamp Quantity
1 One
2 Two
3 Three (F28T5 only)
Lamp Type - 4’ Nominal Length
28 F28T5
54 F54T5HO (2 Lamp Max.)
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
1
One
Two
2
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
F** .125" Clear Polycarbonate
(Outer Lens Only)
*Not available as Base Material
**SN Option
24
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
TN Night Light Lamp by others
(Not available w/ 3 F54T5HO)
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food
Zone/National
Sanitation Foundation Listed
WLWet Location Listed
IH4 Full Length Internal Hinge
Mighty Mac®
SDSA SERIES
CEILING MOUNT SURFACE
hinged door
Lamps: Biax, T8, T5, T5HO
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
LENS RETENTION: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
HOUSING: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
DOOR: One-piece die-formed prime grade material as specified - see ordering information.
FASTENERS: Hardened security screws as
specified - see ordering information. Fully
recessed.
FINISH: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
HINGE: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for 2' (IH2) and full
length (IH4) internal hinge.
LAMPS: Quantity and type as specified - see
ordering information. Lamps supplied by others.
LENS: As specified - maximum thickness
.625" - see ordering information.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional Removable Gear Tray (RGT)
with quick disconnect.
Listings: UL listed for damp locations. See
ordering information for wet location applications. U.S. Patent No. 7,325,939.
PHOTOMETRICs: Efficiency of SDSa4-0/0232-IS-1-120-1/B-1 = 56.3%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
49.43"
1256mm
14.56"
370mm
36.00"
914mm
14.56" 8.00"
370mm 203mm
3.50"
89mm
12.25"
311mm
(4) .50" Dia.
Mounting Holes
2.00" Dia. Wiring Hole
(2) Mounting Keyholes
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SDSA
Nominal Size
2 12" x 24"
4 12" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
3 Three
*Not available as Door Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1 Lamp Max.)
40B F40TT (2 Lamp Max.)
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
KO 1/2" EMT Knockout
SK Speaker Housing Extension
TNPL Night Light Lamp by others (2 Lamp
Max. w/ F54T5HO)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
• Not available with F54T5HO
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
25
Mighty Mac®
SDSAT5 SERIES
CEILING MOUNT SURFACE
hinged door
Lamps: T5, T5HO
Size: Nominal 12" x 48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
LENS RETENTION: Vertically adjustable “Z”
brackets - prime grade material. Secured to
housing via thru-studs.
HOUSING: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
DOOR: One-piece die-formed prime grade material as specified - see ordering information.
FASTENERS: Hardened security screws as
specified - see ordering information. Fully
recessed.
HINGE: Full length staked and welded internal
piano type hinge (1/2" knuckle/1/8" diameter
pin) standard.
FINISH: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
LENS: As specified - maximum total thickness
.500" - see ordering information.
LAMPS: Quantity and type as specified - see
ordering information. Lamps supplied by others.
BALLAST: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Standard removable gear tray with
quick disconnect.
LISTINGS: UL listed for damp locations. See
ordering information for wet location applications. U.S. Patent No. 7,325,939.
PHOTOMETRICs: For photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .50" Mounting Holes
2.00" Dia. Wiring Hole
12.50"
(318mm)
2.62"
(2) Mounting
Keyholes
(67mm)
6.25"
12.50"
(156mm) (318mm)
46.00"
(1168mm)
49.44"
(1256mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SDSAT5
Nominal Size
4 12" x 48"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
A* 18 Gauge SS (Brushed)
B* 18 Gauge SS (Painted)
Lamp Quantity
1 One
2 Two
3 Three
Lamp Type - 4’ Nominal Length
28 F28T5
54 F54T5HO
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
F** .125" Clear Polycarbonate
(Outer Lens Only)
*Not available as Door Material
**SN Option
26
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
KO 1/2" EMT Knockouts
TN Night Light Lamp by others
(Not available w/ 3 F54T5HO)
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food
Zone/National Sanitation
Foundation Listed
WLWet Location Listed
Mighty Mac®
SSB SERIES
CEILING MOUNT SURFACE
hinged clamshell
Lamps: Biax, T8, T5, T5HO
Size: Nominal 16"x24" and 16"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SSB4-0/0-332IS-1-120-1/B-1 = 66.5%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" embossed mounting holes
2.00" dia. Wiring hole
(4) .62" embossed mounting holes
2.00" dia. Wiring hole
17.00"
(432mm)
3.50"
11.00"
(102mm)
11.00"
17.00"
17.00"
(279mm) (432mm)
(279mm) (432mm)
22.00"
23.00"
(559mm)
(584mm)
25.50"
49.50"
(648mm)
(1257mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SSB
Nominal Size
2 16" x 24"
4 16" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
* Not available as Base Material
• Two lamp max. w/ F54T5HO
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (2 Lamp Max.)
40B F40TT (3 Lamp Max.)
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO (3 Lamp Max.)
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
27
Mighty Mac®
SSC SERIES
CEILING MOUNT SURFACE
hinged clamshell
Lamps: Biax, T8, T5, T5HO
Size: Nominal 20"x24" and 20"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
HOUSING: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
LENS: As specified - maximum thickness
.625" - see ordering information.
BASEPLATE: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
FASTENERS: Hardened security screws as
specified - see ordering information. Fully
recessed.
HINGE: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
LENS RETENTION: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
FINISH: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
LAMPS: Quantity and type as specified - see
ordering information. Lamps supplied by others.
BALLAST: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
LUMINOUS SEAL: Polyurethane foam prevents light leaks from luminaire base.
LISTINGS: UL listed for damp locations. See
ordering information for wet location applications.
INSTALLATION: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SSC4-0/0-432IS-1-120-1/9-1 = 68%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" embossed mounting holes
2.00" dia. Wiring hole
(4) .62" embossed mounting holes
2.00" dia. Wiring hole
21.00"
(533mm)
3.50"
15.00"
(89mm)
15.00"
21.00"
22.00"
21.00"
(381mm) (533mm)
(381mm) (533mm)
23.00"
(559mm)
(584mm)
25.50"
49.50"
(648mm)
(1257mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
SSC
Nominal Size
2 20" x 24"
4 20" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
* Not available as Base Material
• Two lamp max. w/ F54T5HO
28
Lamp
Lamp Ballast
QtyTypeType
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Ballast
Voltage
Qty
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Lens Inner/Outer
Fasteners Options Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
Mighty Mac®
SSD SERIES
PROJECT INFORMATION
Ceiling Mount surface
hinged clamshell
Lamps: Biax, T8, T5, T5HO
Size: Nominal 24"x24" and 24"x48"
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
HOUSING: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
LENS: As specified - maximum thickness
.625" - see ordering information.
BASEPLATE: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
FASTENERS: Hardened security screws as
specified - see ordering information. Fully
recessed.
HINGE: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
LENS RETENTION: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SSD4-0/0-432IS-1-120-1/B-1 = 70%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" embossed mounting holes
2.00" dia. Wiring hole
(6) .62" embossed mounting holes
2.00" dia. Wiring hole
25.00"
(635mm)
3.50"
19.00"
(89mm)
19.00"
25.00"
22.00"
23.00"
(559mm)
(584mm)
25.50"
49.50"
(648mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
25.00"
(483mm) (635mm)
(483mm) (635mm)
(1257mm)
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SSD
Nominal Size
2 24" x 24"
4 24" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
* Not available as Base Material
• Three lamp max. w/ F54T5HO
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
29
Mighty Mac®
SCA SERIES
Ceiling Mount Surface
hinged clamshell
Lamps: Biax, T8
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.875" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Full length continuous heavy gauge
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to
baseplate via keyholes.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Lens RETENTION: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCA4-0/0-232IS-1-120-1/B-1 = 59.2%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" mounting holes
(4) .62" mounting holes
2.00" dia. Wiring hole
2.00" dia. Wiring hole
12.00"
(305mm)
8.00"
8.00"
12.00"
12.00"
(203mm) (305mm)
(203mm) (305mm)
5.00"
(127mm)
22.00"
24.00"
(558mm)
(609mm)
51.25"
27.75"
(1302mm)
(705mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCA
Nominal Size
2 12" x 24"
4 12" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
*Not available as Base Material
30
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGTRemovable Gear Tray
Mighty Mac®
SCB SERIES
Ceiling Mount surface
hinged clamshell
Lamps: Biax, T8
Size: Nominal 16"x24" and 16"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.875" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Full length continuous heavy gauge
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to
baseplate via keyholes.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCB4-0/0-332IS-1-120-1/B-1 = 63.5%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" Mounting Holes
2.00" Dia. Wiring Hole
(4) .62" mounting holes
2.00" dia. Wiring hole
16.00"
(406mm)
12.00"
5.00"
12.00"
16.00"
16.00"
(305mm) (406mm)
(305mm) (406mm)
(127mm)
22.00"
24.00"
(558mm)
(609mm)
51.25"
27.75"
(1296.6mm)
(705mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCB
Nominal Size
2 16" x 24"
4 16" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Base Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (2 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGTRemovable Gear Tray
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
31
Mighty Mac®
SCC SERIES
Ceiling Mount surface
hinged clamshell
Lamps: Biax, T8
Size: Nominal 20"x24" and 20"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.875" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Full length continuous heavy gauge
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to
baseplate via keyholes.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCC4-0/0-332IS-1-120-1/A-1 = 69.2%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" Mounting Holes
2.00" Dia. Wiring Hole
(4) .62" mounting holes
2.00" dia. Wiring hole
20.00"
(508mm)
5.00"
16.00"
(127mm)
16.00"
20.00"
20.00"
(406mm) (508mm)
(406mm) (508mm)
22.00"
24.00"
(558mm)
(609mm)
51.25"
27.75"
(705mm)
(1302mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCC
Nominal Size
2 20" x 24"
4 20" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Base Material
32
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGTRemovable Gear Tray
Mighty Mac®
SCD SERIES
Ceiling Mount Surface
hinged clamshell
Lamps: Biax, T8
Size: Nominal 24"x24" and 24"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.875" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Full length continuous heavy gauge
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to
baseplate via keyholes.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCD4-0/0-432IS-1-120-1/B-1 = 65.6%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
(6) .62" mounting holes
2.00" dia. Wiring hole
24.00"
(610mm)
5.00"
20.00"
(127mm)
20.00"
24.00"
(508mm)
(508mm) (610mm)
24.00"
(610mm)
22.00"
24.00"
(558mm)
(609mm)
51.25"
27.75"
(1302mm)
(705mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCD
Nominal Size
2 24" x 24"
4 24" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Base Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGTRemovable Gear Tray
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
33
Mighty Mac®
Ceiling Mount SURFACE
Hinged door
Lamps: Biax, T8, T5, T5HO
Size: Nominal 12"x24" and 12"x48"
SDA SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for internal hinge (IH2)
and full length (IH4) internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional Removable Gear Tray (RGT)
with quick disconnect.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SDA4-0/0-232IS-1-120-1/B-1 = 56.3%. For additional photometric information, go to www.kenall.com.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
49.43"
25.43"
(4) .50" mounting holes
(2) .50" mounting holes
46.00"
2.00" dia. Wiring
hole
3.50"
89mm
8.00"
12.00" 7.50"
12.37"
(203mm) (314mm)
(4) .50" Dia.
14.00"
Mounting
Holes
(356mm)
12.37"
314mm
22.00"
2.00" dia.
Wiring hole
12.00" 7.50"
2.00" Dia. Wiring Hole
(2) mounting
(2)
Mounting Keyholes
keyholes
25.43"
(646mm)
8.00"
(2) mounting
keyholes
12.37"
(203mm) (314mm)
2.00" Dia. Wiring Hole
36.00"
(2) Mounting
(914mm) Keyholes
(2) .50" Dia.
49.43"
Mounting
Holes
(1255mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SDA
Nominal Size
2 12" x 24"
4 12" x 48"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
3 Three (F32T8, F54T5HO
and F28T5 only)
*Not available as Door Material
34
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
KO 1/2" EMT Knockout
SK Speaker Housing Extension
TNPL Night Light Lamp by others
(2 Lamp Max. w/ F54T5HO)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food
Zone/National Sanitation
Foundation Listed
WLWet Location Listed
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
• Not available w/ F54T5HO
Mighty Mac®
Ceiling Mount Surface
hinged door
Lamps: Biax, T8, T5, T5HO
Size: Nominal 24"x24" and 24"x48"
SDD SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for internal hinge (IH2)
and full length (IH4) internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional Removable Gear Tray (RGT)
with quick disconnect.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SDD4-0/0432-IS-1-120-1/B-1 = 63.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
(2) .50" mounting holes
Cross Section
Mounting Holes
2.00" dia. Wiring hole
(4) .50" mounting holes
25.43"
49.43"
2.00" dia. Wiring hole
22.00"
3.50"
89mm
23.00"
46.00"
18.50"
23.00"
(470mm) (584mm)
23.00"
18.50"
18.50"
23.00"
(470mm) (584mm)
18.50"
23.00"
584mm
(2) mounting
keyholes
14.00"
(356mm)
mounting
(2) Mounting(2)
Keyholes
keyholes
2.00" Dia. Wiring Hole
25.43"
(2) .50" Dia.
(646mm)
SeriesNominal Hsg./Door
SizeMaterial
49.43"
(1255mm)
Mounting Holes
ORDERING INFORMATION
(2) Mounting Keyholes
2.00"36.00"
Dia. Wiring Hole
(4) .50" Dia.
(914mm)
Mounting Holes
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SDD
Nominal Size
2 24" x 24"
4 24" x 48"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Door Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
.125" Clear Polycarbonate
G
4
.156" Prismatic Polycarbonate
R
.156" Prismatic Tempered Glass
.187" Prismatic Polycarbonate
6
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A
.250" Clear Tempered Glass
B
.375" Clear Polycarbonate
C
.375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
KO 1/2" EMT Knockout
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food
Zone/National
Sanitation Foundation Listed
WLWet Location Listed
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
• Three lamp max. w/F54T5HO
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
35
Mighty Mac®
PSDT5 SERIES
Ceiling Mount Surface
hinged door
Lamps: T5, T5HO
Size: Nominal 24" x 48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Lens Retention: Vertically adjustable “Z”
brackets - prime grade material. Secured to
housing via thru-studs.
Door: One-piece die-formed prime grade material as specified - see ordering information.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Full length staked and welded internal
piano type hinge (1/2" knuckle/1/8" diameter
pin) standard.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lens: As specified - maximum total thickness
.500" - see ordering information.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Standard removable gear tray with
quick disconnect.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: For photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .50" Mounting Holes
2.00" Dia. Wiring Hole
2.62"
(67mm)
17.00"
22.00"
(559mm)
22.00"
(457mm) (559mm)
(2) Mounting
Keyholes
46.00"
(914mm)
49.25"
(1255mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options PSDT5
Nominal Size
4
24" x 48"
Door/Housing Material
0
14 Gauge CRS (Painted)
1
16 Gauge CRS (Painted)
2** 18 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
4
16 Gauge SS (Painted)
6
14 Gauge SS (Brushed)
7
16 Gauge SS (Brushed)
A** 18 Gauge SS (Brushed)
B** 18 Gauge SS (Painted)
Lamp Quantity
2
Two
3
Three
4
Four
5
Five
6
Six
Lamp Type - 4’ Nominal Length
28 F28T5
54 F54T5HO
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
1 One
2 Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
F* .125" Clear Polycarbonate
(Outer Lens Only)
*SN Option
**Not available in Door Material
36
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
KO 1/2" EMT Knockouts (Ends)
TN Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
Mighty Mac®
SCH SERIES
Ceiling Mount surface
hinged clamshell
Lamps: Biax, T8
Size: Nominal 20"x24" and 20"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCH4-0/0-332IS-1-120-1/B-1 = 60%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" embossed mounting holes
2.00" dia. Wiring hole
(4) .62" embossed mounting holes
2.00" dia. Wiring hole
21.00"
(533mm)
15.00"
15.00"
21.00"
21.00"
(381mm) (533mm)
(381mm) (533mm)
5.25"
(133mm)
23.00"
22.00"
(584mm)
(559mm)
49.50"
25.50"
(1232mm)
(648mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCH
Nominal Size
2 20" x 24"
4 20" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
*Not available as Base Material
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
37
Mighty Mac®
SCT SERIES
Ceiling Mount surface
hinged clamshell
Lamps: Biax, T8, T5, T5HO
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to either
side of baseplate via keyholes. See Options
for full length internal hinge (IH4).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of SCT4-0/0-232IS-1-120-1/B-1 = 57.5%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
(6) .62" mounting holes
2.00" dia. Wiring hole
13.00"
(330mm)
7.00"
7.00"
13.00"
5.25"
13.00"
(178mm) (330mm)
(178mm) (330mm)
(133mm)
22.50"
10.50"
(571mm)
(267mm)
26.50"
50.50"
(1283mm)
(673mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options SCT
Nominal Size
2 12" x 24"
4 12" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
* Not available as Base Material
• Not available w/ F54T5HO
38
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO (2 Lamp Max.)
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light Lamp by others
(2 Lamp Max. with F54T5HO)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
Mighty Mac®
RMCA SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Full length completely concealed
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to door.
Lens: As specified - maximum thickness
.500" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RMCA4-2/2232-IS-1-120-1/9-1 = 51%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .50" x .88" OBROUND
(2) 1/2" EMT K.O. Access Plate (On side)
4.360"
4.875"
(111mm)
(124mm)
.437"
11.750"
11.875"
(302mm)
20.50"
(11mm)
(521mm)
(298mm)
Recommended
Ceiling Cutout:
48.250" x 10.437"
20.50"
48.00”
(521mm)
(1219mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RMCA
Nominal Size
2
12" x 24"
4
12" x 48"
Ceiling Type
FL/TR Flange/Threaded Rod
FL/CC Flange/Cross Channel
FL/Y Flange/Yoke
FL/SA Flange/Swing-Out Arms
TG
T-Grid
MPMetal Pan
CZ
Concealed Z-Spline
Door/Housing Material
0
14 Gauge CRS (Painted)
1
16 Gauge CRS (Painted)
2
18 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
4
16 Gauge SS (Painted)
B
18 Gauge SS (Painted)
6*
14 Gauge SS (Brushed)
7*
16 Gauge SS (Brushed)
18 Gauge SS (Brushed)
A*
Lamp Quantity
1
One
2
Two
3
Three
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lamp Type - 2’ Nominal Length
17
F17T8
31U F31T8 (1 Lamp Max.)
40B F40TT (2 Lamp Max.)
Lamp Type - 4’ Nominal Length
32
F32T8
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SC Specified Ceiling
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
*Not available as Hsg. Material
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
39
Mighty Mac®
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8
Size: Nominal 24"x24" and 24"x48"
RMCD SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Full length completely concealed
piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to door.
Lens: As specified - maximum thickness
.500" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RMCD4-2/2432-IS-1-120-1/9-1 = 64.5%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .50" x .88" OBROUND
(2) 1/2" EMT K.O. Access Plate (On side)
Recommended
Ceiling Cutout:
48.250" x 22.437"
4.875"
(124mm)
23.875"
16.00"
(606mm)
(406mm)
.437"
(11mm)
23.750"
(603mm)
20.50"
(521mm)
20.50"
48.00”
(521mm)
(1219mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RMCD
Nominal Size
2
24" x 24"
4
24" x 48"
Ceiling Type
FL/TR Flange/Threaded Rod
FL/CC Flange/Cross Channel
FL/Y Flange/Yoke
FL/SA Flange/Swing-Out Arms
TG
T-Grid
MPMetal Pan
CZ
Concealed Z-Spline
Door/Housing Material
0
14 Gauge CRS (Painted)
1
16 Gauge CRS (Painted)
2
18 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
4
16 Gauge SS (Painted)
B
18 Gauge SS (Painted)
6*
14 Gauge SS (Brushed)
7*
16 Gauge SS (Brushed)
A*
18 Gauge SS (Brushed)
Lamp Quantity
2
Two
3
Three
4
Four
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
55B F55TT
Lamp Type - 4’ Nominal Length
32 F32T8
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1 One
2 Two
*Not available as Hsg. Material
40
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SC Specified Ceiling
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
Mighty Mac®
Ceiling Mount recessed
hinged doorframe
Lamps: T5, T5HO
Size: Nominal 24" x 48"
PRCT5 SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Hinge: Full length completely concealed internal piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door.
Lens: As specified - maximum total thickness
.500" - see ordering information.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
PHOTOMETRICs: For photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .50" x .88" OBROUND
(2) 1/2" EMT K.O. Access Plate
.221
Recommended
Ceiling Cutout:
48.25" x 22.50"
21.73"
(552mm)
2.88"
(73mm)
18.00"
23.88"
(533mm) (607mm)
.58"
(15mm)
23.75"
(603mm)
20.50"
20.50"
(521mm)
48.00"
(521mm)
(1219mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options PRCT5
Nominal Size
4
24" x 48"
Ceiling Type
FL/TR Flange/Threaded Rod
FL/CC Flange/Cross Channel
FL/Y Flange/Yoke
FL/SA Flange/Swing-Out Arms
TG
T-Grid
Door/Housing Material
14 Gauge CRS (Painted)
0
1
16 Gauge CRS (Painted)
2
18 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
4
16 Gauge SS (Painted)
B
18 Gauge SS (Painted)
6*
14 Gauge SS (Brushed)
7*
16 Gauge SS (Brushed)
18 Gauge SS (Brushed)
A*
*Not available as Base Material
**SN Option
Lamp Quantity
Two
2
3
Three
4
Four
5
Five
6
Six
Lamp Type - 4’ Nominal Length
28 F28T5
54 F54T5HO
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
.187" Prismatic Polycarbonate
6
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
F** .125" Clear Polycarbonate
(Outer Lens Only)
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
41
Mighty Mac®
RCA SERIES
Ceiling Mount recessed
HInged doorframe
Lamps: Biax, T8, T5, T5HO
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door and mounts
to housing via keyholes. See Options for full
length internal hinge (IH4).
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Installation: See Options for specific
mounting hardware required. See security
detention Recessed Installation Data Technical
Sheet or consult factory with questions.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RCA4-0/0-232IS-1-120-1/B-1 = 57.2%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
(4) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
3.00"
(76.2mm)
9.00"
9.00"
12.00"
12.00"
(229mm) (305mm)
(229mm) (305mm)
13.50"
(341.5mm)
18.00"
21.00"
18.00"
(457mm)
(533mm)
(457mm)
49.00"
25.00"
(1245mm)
(635mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RCA
Nominal Size
2 12" x 24"
4 12" x 48"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
3 Three
* Not available as Door Material
** Not available as Hsg. Material
• Not available w/ F54T5HO
42
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1Lamp Max.)
40B F40TT (2 Lamp Max.)
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO (2 Lamp Max.)
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CC Cross Channel Mounting Kit
PFPlaster Frame Mounting Kit
YF Yoke Frame Mounting Kit
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light - Lamp by others
(Two Lamp Max. w/ F54T5HO)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
IH4 Full Length Internal Hinge
Mighty Mac®
RCB SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8, T5, T5HO
Size: Nominal 16"x24" and 16"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door and mounts
to housing via keyholes. See Options for full
length internal hinge (IH4).
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Installation: See Options for specific
mounting hardware required. See security
detention Recessed Installation Data Technical
Sheet or consult factory with questions.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RCB4-0/0-332IS-1-120-1/B-1 = 57.8%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
(4) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
3.00"
(76.2mm)
13.00"
13.00"
16.00"
16.00"
(330mm) (406mm)
(330mm) (406mm)
17.50"
(442.7mm)
18.00"
21.00"
18.00"
(457mm)
(533mm)
(457mm)
49.00"
25.00"
(1245mm)
(635mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RCB
Nominal Size
2 16" x 24"
4 16" x 48"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
* Not available as Door Material
** Not available as Hsg. Material
• Three lamp max. w/ F54T5HO
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (2 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CC Cross Channel Mounting Kit
PFPlaster Frame Mounting Kit
YF Yoke Frame Mounting Kit
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light - Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
43
Mighty Mac®
RCC SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8, T5, T5HO
Size: Nominal 20"x24" and 20"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: As specified - maximum thickness
.625" - see ordering information.
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door and mounts
to housing via keyholes. See Options for full
length internal hinge (IH4).
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Installation: See Options for specific
mounting hardware required. See security
detention Recessed Installation Data Technical
Sheet or consult factory with questions.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RCC4-0/0-332IS-1-120-1/B-1 = 64.7%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
(6) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
3.00"
(76.2mm)
17.00"
17.00"
20.00"
20.00"
(432mm) (508mm)
(432mm) (508mm)
21.50"
(543.9mm)
18.00"
21.00"
18.00"
(457mm)
(533mm)
(457mm)
49.00"
25.00"
(1245mm)
(635mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RCC
Nominal Size
2 20" x 24"
4 20" x 48"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Door Material
**Not available as Hsg. Material
44
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CC Cross Channel Mounting Kit
PFPlaster Frame Mounting Kit
YF Yoke Frame Mounting Kit
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light - Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
IH4 Full Length Internal Hinge
Mighty Mac®
RCD SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8, T5, T5HO
Size: Nominal 24"x24" and 24"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: As specified - maximum thickness
.625" - see ordering information.
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door and mounts
to housing via keyholes. See Options for full
length internal hinge (IH4).
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Installation: See Options for specific
mounting hardware required. See security
detention Recessed Installation Data Technical
Sheet or consult factory with questions.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
PHOTOMETRICs: Efficiency of RCD4-0/0432-IS-1-120-1/B-1 = 66.4%. For additional
photometric information, go to www.kenall.
com.
(4) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
(6) 1.25" x .75" obround
(2) 1/2" emt k.o. access plate
3.00"
(76.2mm)
21.00"
21.00"
24.00"
24.00"
(533mm) (610mm)
(533mm) (610mm)
25.50"
(645.1mm)
18.00"
21.00"
18.00"
(457mm)
(533mm)
(457mm)
49.00"
25.00"
(1245mm)
(635mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RCD
Nominal Size
2 24" x 24"
4 24" x 48"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Door Material
**Not available as Hsg. Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CC Cross Channel Mounting Kit
PFPlaster Frame Mounting Kit
YF Yoke Frame Mounting Kit
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light - Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
SN Splash Non-Food Zone/
National Sanitation
Foundation Listed
WLWet Location Listed
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
45
Mighty Mac®
RGA SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8
Size: Nominal 12"x24" and 12"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). Pin secured to knuckle.
Hinge welded to door and mounts to housing
via keyholes. See Options for full length internal hinge (IH4).
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens RETENTION: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
PHOTOMETRICs: Efficiency of RGA4-2/2-232IS-1120-1/9-1 = 51%. For additional photometric information, go to www.kenall.com.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
12.00"
(2) 1/2" EMT K.O. Access Plate
(303.6mm)
(2) 1/2" EMT K.O. Access Plate
11.75"
11.75"
5.00"
(298mm)
(298mm)
(126.5mm)
48.00"
24.00"
(1219mm)
(610mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RGA
Nominal Size
2 12" x 24"
4 12" x 48"
Door/Housing Material
0**14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3**14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
B 18 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
Lamp Quantity
1 One
2 Two
3 Three
*Not available as Door Material
**Not available as Hsg. Material
46
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (1Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SC Specified Ceiling
TNPL Night Light Lamp by others
DLNLED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
Mighty Mac®
RGD SERIES
Ceiling Mount recessed
hinged doorframe
Lamps: Biax, T8
Size: Nominal 24"x24" and 24"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material
as specified - see ordering information. TIG
and spot welded construction.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to
knuckle. Hinge welded to door and mounts
to housing via keyholes. See Options for full
length internal hinge (IH4).
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
PHOTOMETRICs: Efficiency of RGD4-2/2432-IS-1-120-1/9-1 = 64.5%. For additional
photometric information, go to www.kenall.
com.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(2) 1/2" EMT K.O. Access Plate
24.00"
(2) 1/2" EMT K.O. Access Plate
(607.2mm)
5.00"
23.75"
23.75"
(126.5mm)
(603mm)
(603mm)
24.00"
48.00"
(610mm)
(1219mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options RGD
Nominal Size
2 24" x 24"
4 24" x 48"
Door/Housing Material
0**14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3**14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
B 18 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
Lamp Quantity
2 Two
3 Three
4 Four
*Not available as Door Material
**Not available as Hsg. Material
Lamp Type - 2’ Nominal Length
17 F17T8
31U F31T8 (3 Lamp Max.)
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
SC Specified Ceiling
TNPL Night Light Lamp by others
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
47
Mighty Mac®
Wall Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8
Size: Nominal (7"x11") x17", (7"x11") x29",
(7"x11") x53"
WCU SERIES
(Two Aperture)
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to baseplate via keyholes. See Options for full length
internal hinge (IH4) (standard on 1' housing).
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of WCU4-0/0332-IS-1-120-1/9-1 = 51.4%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(730mm)
12.00"
(610mm)
(260mm)
5.00"
10.25"
(260mm)
(1340mm)
48.00"
24.00"
(305mm)
10.25"
52.75"
28.75"
16.75"
(425mm)
(127mm)
(1219mm)
5.00"
10.25"
(127mm)
(260mm)
2.00" Dia. Wiring Hole
(4) .62" Mounting Holes
24.00"
(609mm)
5.00"
10.25"
(127mm)
(260mm)
2.00" Dia. Wiring Hole
(4) .62" Mounting Holes
2.00" Dia. Wiring Hole
(6) .62" Mounting Holes
7.00"
(178mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options WCU
Nominal Size
1 (7"x11") x 17"
2 (7"x11") x 29"
4 (7"x11") x 53"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Qty (Uplight Component)
1 One
2 Two
Lamp Qty (Downlight Component)
1 One
2 Two
*Not available as Base Material
48
Lamp Type - 1’ Nominal Length
13
13 Watt Twin
13Q 13 Watt Quad (3 Lamp Max.)
26Q 26 Watt Quad (3 Lamp Max.)
Lamp Type - 2’ Nominal Length
17
F17T8
40B F40TT (3 Lamp Max.)
Lamp Type - 4’ Nominal Length
F32T8
32
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CO Convenience Outlet
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
GFI Ground Fault Outlet
RP Recessed Push Switch
SK Speaker Housing Extension
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
Mighty Mac®
WCH SERIES
(One Aperture)
Wall Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8
Size: Nominal (7"x11") x17", (7"x11") x29",
(7"x11") x53"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to baseplate via keyholes. See Options for full length
internal hinge (IH4) (standard on 1' housing).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of WCH4-0/0232-IS-1-120-1/9-1 = 45.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
10.25"
(260mm)
24.00"
(1219mm)
12.00"
(610mm)
(305mm)
(260mm)
(1340mm)
(730mm)
(425mm)
10.25"
5.00"
(127mm)
48.00"
24.00"
(609mm)
5.00"
10.25"
(127mm)
(260mm)
2.00" Dia. Wiring Hole
(4) .62" Mounting Holes
52.75"
28.75"
16.75"
5.00"
10.25"
(127mm)
(260mm)
2.00" Dia. Wiring Hole
(4) .62" Mounting Holes
2.00" Dia. Wiring Hole
(6) .62" Mounting Holes
7.00"
(178mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options WCH
Nominal Size
1 (7"x11") x 17"
2 (7"x11") x 29"
4 (7"x11") x 53"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Qty
1 One
2 Two
Lamp Type - 1’ Nominal Length
13 13 Watt Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
*Not available as Base Material
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CO Convenience Outlet
EL
Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS
Single Fuse & Holder
GFI Ground Fault Outlet
RP Recessed Push Switch
SK
Speaker Housing Extension
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
49
Mighty Mac®
WCBU Bull Nose Series
(Two Aperture)
Wall Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8
Size: Nominal (9"x11") x17", (9"x11") x29",
(9"x11") x53"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband concealment and access. Embossed
standoffs prevent distortion.
8.750"
Hinge: Completely concealed (222mm)
drop
slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing
and mounts to base10.25"
(260mm)
plate via keyholes. See
Options for full length
internal hinge (IH4) (standard on 1' housing).
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
PHOTOMETRICs: Efficiency of WCBU4-0/0332-IS-1-120-1/9-1 = 51.4%. For additional
photometric information, go to www.kenall.
com.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
DIMENSIONAL DATA
Cross Section
Mounting Holes
8.750"
(222mm)
(730mm)
12.00"
(610mm)
10.25"
(260mm)
(1340mm)
48.00"
24.00"
(305mm)
10.25"
(260mm)
52.75"
28.75"
16.75"
(425mm)
5.00"
5.00"
10.25"
(127mm)
(127mm)
(260mm)
2.00" dia. Wiring hole
(4) .62" mounting holes
(1219mm) 24.00"
(609mm)
2.00" dia. Wiring hole
(4) .62" mounting holes
5.00"
10.25"
(127mm)
(260mm)
2.00" dia. Wiring hole
(6) .62" mounting holes
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
16.75"
WCBU
(425mm)
Lamp
Lamp Ballast
QtyTypeType
28.75"
(730mm)
24.00"
12.00"
(610mm)
Ballast
Voltage
52.75"
Qty (1340mm)
Lens Inner/Outer
Fasteners Options 48.00"
(1219mm) 24.00"
(609mm)
Voltage
Fasteners
Lamp Type - 1’ Nominal Length
®
Volts
13 Watt
Torx
1
5.00" Head w/ Center Pin
10.25"
5.00" 120 120
10.25"Twin
(127mm)Head w/ Center Pin
(127mm)
(260mm)
(260mm)
277 277
Volts
2Allen
13 Watt
Quad (3 Lamp Max.)
Max.)
26Q
347 347 Volts
2.00" dia. Wiring
hole26 Watt Quad (3 Lamp
2.00" dia. Wiring hole
2.00" dia. Wiring hole
Length
Lamp Type - 2’ Nominal
Options
(4) .62" mounting holes
(6) .62" mounting holes
(4) .62" mounting holes
17 F17T8
CO Convenience Outlet
Housing/Base Material
Lens (Inner/Outer)
40B F40TT (3 Lamp Max.)
0 14 Gauge CRS (Painted)
0 No Lens
EL Standard Lumen EL Pack
3 14 Gauge SS (Painted)
1 .125" Prismatic Acrylic
Lamp Type - 4’ Nominal Length
PEL High Lumen EL Pack
6* 14 Gauge SS (Brushed)
2 .125" Prismatic Polycarbonate
32 F32T8
SEL Specified EL Pack
3 .125" Textured Polycarbonate
FS Single Fuse & Holder
G .125" Clear Polycarbonate
Lamp Qty (Uplight Component)
Ballast Type
GFI Ground Fault Outlet
4 .156" Prismatic Polycarbonate
1 One
IS
Instant Start Electronic
RP Recessed Push Switch
R .156" Prismatic Tempered Glass
2 Two
<10% THD (T8)
SK Speaker Housing Extension
.187"
Prismatic
Polycarbonate
6
Lamp Qty (Downlight Component)
TC Touch Control Switch
RS Rapid Start Electronic
7 .187" Clear Polycarbonate
1 One
TNPL Night Light
<10% THD (CFL, T8)
8 .187" Clear Tempered Glass
2 Two
(Lamp by others)
SB Specified Ballast
9 .250" Clear Polycarbonate
DLN LED Night Light w/Light
A .250" Clear Tempered Glass
Ballast Qty
Level Control
B .375" Clear Polycarbonate
1
One
UV Ultraviolet Filter
C .375" Clear Tempered Glass
2
Two
RGT Removable Gear Tray
*Not available as Base Material
J
.500" Clear Polycarbonate
IH4 Full Length Internal Hinge
P .500" Clear Tempered Glass
Nominal Size
1 (9"x11") x 17"
2 (9"x11") x 29"
4 (9"x11") x 53"
50
(305mm)
10.25"
(260mm)
13
5.00"
(127mm)
13Q
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Mighty Mac®
WCB Bull Nose Series
(One Aperture)
Wall Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8
Size: Nominal (9"x11") x17", (9"x11") x29",
(9"x11") x53"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
8.750"
Hinge: Completely concealed drop(222mm)
slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
10.25"
Hinge welded to housing and
(260mm)mounts to baseplate via keyholes. See Options for full length
internal hinge (IH4) (standard on 1' housing).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of WCB4-0/0332-IS-1-120-1/9-1 = 67.2%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
8.750"
(222mm)
(730mm)
12.00"
(610mm)
(425mm)
10.25"
(260mm)
(1340mm)
48.00"
24.00"
(305mm)
10.25"
(260mm)
52.75"
28.75"
16.75"
5.00"
(127mm)
2.00" dia. Wiring hole
(4) .62" mounting holes
(1219mm) 24.00"
(609mm)
5.00"
10.25"
(127mm)
(260mm)
5.00"
10.25"
(127mm)
(260mm)
2.00" dia. Wiring hole
(6) .62" mounting holes
2.00" dia. Wiring hole
(4) .62" mounting holes
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
WCB
16.75"
(425mm)
12.00"
Lamp
Lamp Ballast
QtyTypeType
28.75"
(730mm)
24.00"
(610mm)
Ballast
Voltage
52.75"
Qty (1340mm)
Lens Inner/Outer
Fasteners Options 48.00"
(1219mm) 24.00"
(609mm)
Voltage
Lamp Type - 1’ Nominal Length
Fasteners
®
5.00"
10.25"
Volts
Head w/ Center Pin
1
Torx
13 13 Watt
Twin
5.00"120 120
10.25"
5.00"
10.25"
(127mm)
(127mm)
(260mm)
(260mm)
(260mm)
(127mm)
277 277
Volts
2Allen
Head w/ Center Pin
Quad
13Q 13 Watt
26Qhole
26 Watt Quad
347 347 Volts
2.00" dia. Wiring hole
2.00" dia. Wiring hole
2.00" dia. Wiring
Length
Options
(6) .62" mounting holes
(4) .62" mounting Lamp
holes Type - 2’ Nominal
(4) .62"
mounting holes
17 F17T8
CO Convenience Outlet
Lens (Inner/Outer)
Housing/Base Material
0 14 Gauge CRS (Painted)
40B F40TT
0
No Lens
EL Standard Lumen EL Pack
3 14 Gauge SS (Painted)
1
.125" Prismatic Acrylic
Lamp Type - 4’ Nominal Length
PEL High Lumen EL Pack
6* 14 Gauge SS (Brushed)
2
.125" Prismatic Polycarbonate
32 F32T8
SEL Specified EL Pack
3
.125" Textured Polycarbonate
FS Single Fuse & Holder
G .125" Clear Polycarbonate
Lamp Qty (Downlight Component)
Ballast Type
GFI Ground Fault Outlet
Prismatic
Polycarbonate
4
.156"
1 One
IS
Instant Start Electronic
RP Recessed Push Switch
R
.156"
Prismatic
Tempered
Glass
2 Two
<10% THD (T8)
SK Speaker Housing Extension
6
.187"
Prismatic
Polycarbonate
TC Touch Control Switch
RS Rapid Start Electronic
7
.187" Clear Polycarbonate
TNPL Night Light
<10% THD (CFL, T8)
.187" Clear Tempered Glass
8
(Lamp by others)
SB Specified Ballast
9
.250" Clear Polycarbonate
DLN LED Night Light w/Light
A .250" Clear Tempered Glass
Ballast Qty
Level Control
B .375" Clear Polycarbonate
1
One
UV Ultraviolet Filter
C .375" Clear Tempered Glass
2
Two
RGT Removable Gear Tray
*Not available as Base Material
J
.500" Clear Polycarbonate
IH4 Full Length Internal Hinge
P
.500" Clear Tempered Glass
Nominal Size
1 (9"x11") x 17"
2 (9"x11") x 29"
4 (9"x11") x 53"
(305mm)
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
51
Mighty Mac®
WCT SERIES
(One Aperture)
Wall Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8
Size: Nominal (9"x14") x17", (9"x14") x29",
(9"x14") x53"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens: As specified - maximum thickness
.625" - see ordering information.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed drop slot piano
type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle.
Hinge welded to housing and mounts to baseplate via keyholes. See Options for full length
internal hinge (IH4 (standard on 1' housing)).
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of WCT4-0/0232-IS-1-120-1/B-1 = 47.2%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(730mm)
(1340mm)
12.00"
(610mm)
24.00"
(1219mm)
(305mm)
13.37"
(339mm)
13.37"
(339mm)
52.75"
28.75"
16.75"
(425mm)
7.00"
(178mm)
48.00"
(178mm)
(339mm)
7.00"
13.37"
(178mm)
(339mm)
2.00" dia. Wiring hole
(4) .62" mounting holes
2.00" dia. Wiring hole
(4) .62" mounting holes
24.00"
(609mm)
7.00"
13.37"
2.00" dia. Wiring hole
(6) .62" mounting holes
8.37"
(212mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options WCT
Nominal Size
1 (9"x14") x 17"
2 (9"x14") x 29"
4 (9"x14") x 53"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Qty
1 One
2 Two
Lamp Type - 1’ Nominal Length
13 13 Watt Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
*Not available as Base Material
52
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
CO Convenience Outlet
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
GFI Ground Fault Outlet
RP Recessed Push Switch
SK Speaker Housing Extension
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
Mighty Mac®
WCD Series
(Two Aperture)
Wall Mount surface
HINGED CLAMSHELL
Lamps: Biax, T8
Size: Nominal (7"x17") x27", (7"x17") x51"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Hinge: Completely concealed, spring loaded
clevis style drop slot internal hinge spot
welded to housing. Mounts to baseplate via
slots.
Lens: As specified - maximum thickness
.875" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of WCD4-0/0332-IS-1-120-1/7-1 = 53.2%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(6) .62" mounting holes
2.00" dia. Wiring hole
(4) .62" mounting holes
2.00" dia. Wiring hole
11.00"
11.00" 16.87"
16.87"
16.87"
(279mm) (428mm)
(279mm) (428mm)
(428mm)
21.00"
19.00"
(533mm)
(482mm)
50.50"
26.50"
(1283mm)
(673mm)
6.25"
(159mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options WCD
Nominal Size
2
(7"x17") x 27"
4
(7"x17") x 51"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Qty
2 Two
3 Three
*Not available as Base Material
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
55B F55TT
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL
Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS
Single Fuse & Holder
SK
Speaker Housing Extension
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
53
Mighty Mac®
Wall Mount Surface
HINGED door
Lamps: CFL, Biax, T8
Size: Nominal (6"x10") x14", (6"x10") x26",
(6"x10") x50"
WDU SERIES
(Two Aperture)
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for internal hinge (IH2)
and full length (IH4) internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Listings: UL listed for damp locations.
PHOTOMETRICs: Efficiency of WDU4-0/0232-IS-1-120-1/7-1 = 60.3%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
8.37"
(212mm)
10.00"
(254mm)
5.25"
49.50"
(1257mm)
25.50"
13.50"
(648mm)
(343mm)
22.00"
3.50"
3.50"
(1168mm)
(89mm)
(559mm)
(89mm)
46.00"
23.00"
(584mm)
(133mm)
5.25"
(133mm)
(1) 1/2" emt k.o.'s
5.25"
(133mm)
4.62"
9.25"
(3) 1/2" EMT K.O.'S
(4) .50" Mounting Holes
5.25"
(133mm)
(117mm)
(235mm)
(3) 1/2" EMT K.O.'S
(4) .50" Mounting Holes
3.50"
(89mm)
(2) Mounting
Keyholes
(4) .50" mounting holes
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
WDU
Fasteners Options 1
Nominal Size
1 (6"x10") x 14"
2 (6"x10") x 26"
4 (6"x10") x 50"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
Lamp Qty
1 One
2 Two
Lamp Type - 1’ Nominal Length
13 13 Watt Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT (1 Lamp Max.)
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
*Not available as Base Material
54
Lens Inner/Outer
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
.125" Clear Polycarbonate
G
.156" Prismatic Polycarbonate
4
R
.156" Prismatic Tempered Glass
.187" Prismatic Polycarbonate
6
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A
.250" Clear Tempered Glass
B
.375" Clear Polycarbonate
C
.375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
PSPush Switch
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
Mighty Mac®
Wall Mount Surface
HINGED door
Lamps: CFL, Biax, T8
Size: Nominal (6"x10") x14", (6"x10") x26",
(6"x10") x50"
WDD SERIES
(One Aperture)
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for internal hinge (IH2)
and full length (IH4) internal hinge.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Lens: As specified - maximum thickness
.625" - see ordering information.
Listings: UL listed for damp locations.
PHOTOMETRICs: Efficiency of WDD4-0/0232-IS-1-120-1/7-1 = 45.9%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
49.50"
8.37"
(212mm)
(1257mm)
13.50"
25.50"
(343mm)
10.00"
(254mm)
5.25"
46.00"
(648mm)
3.50"
22.00"
(89mm)
(1168mm)
3.50"
23.00"
(89mm)
(559mm)
(584mm)
3.50"
(89mm)
(133mm)
5.25"
(133mm)
9.25"
(1) 1/2" emt k.o.'s
4.62"
(117mm)
(235mm)
5.25"
(133mm)
5.25"
(3) 1/2" EMT K.O.'S
(4) .50" Mounting Holes
(133mm)
(3) 1/2" EMT K.O.'S
(4) .50" Mounting Holes
(2) Mounting
Keyholes
(4) .50" mounting holes
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
Lamp Qty
1 One
2 Two
Lamp Type - 1’ Nominal Length
13 13 Watt Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT (1 Lamp Max.)
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
*Not available as Base Material
Fasteners Options 1
WDD
Nominal Size
1 (6"x10") x 14"
2 (6"x10") x 26"
4 (6"x10") x 50"
Lens Inner/Outer
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
PSPush Switch
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
55
Mighty Mac®
Wall Mount Book Shelf
HINGED door
Lamps: Biax, T8
Size: Nominal (10"x11") x26",
(10"x11") x51"
WDS SERIES
(One Aperture)
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for internal hinge (IH2)
and full length (IH4) internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Listings: UL listed for damp locations.
PHOTOMETRICs: Efficiency of WDS4-0/0232-IS-1-120-1/7-1 = 45.9%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
49.50"
25.50"
(1257mm)
22.00"
(1168mm)
(648mm)
46.00"
(559mm)
11.00"
(279mm)
11.00"
8.75"
(279mm) (222mm)
3.50"
3.50"
11.00"
(89mm)
(89mm)
8.75"
(279mm) (222mm)
(7) .50" Mounting Holes
(3) 1/2" EMT K.O.'S
(3) 1/2" EMT K.O.'S
(6) .50" Mounting Holes
9.25"
(2) Mounting
Keyholes
(235mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Fasteners Options 1
WDS
Nominal Size
2
(10"x11") x 26"
4
(10"x11") x 50"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
Lamp Qty
1 One
2 Two
56
Lens Inner/Outer
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT (1 Lamp Max.)
Lamp Type - 4’ Nominal Length
32 F32T8
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8)
SB Specified Ballast
Ballast Qty
1
One
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
PSPush Switch
TC Touch Control Switch
TNPL Night Light
(Lamp by others)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
RGT Removable Gear Tray
IH2 Internal Hinge
IH4 Full Length Internal Hinge
Mighty Mac®
RFW SERIES
(Step Light)
Wall Mount RECEssed
Lamps: CFL
Size: Nominal 6"x9"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed 14-gauge prime grade
material. Corners continuously seam welded
and smooth with no post grinding (TIG).
Lens Retention: Vertically adjustable continuous “L” brackets - prime grade material.
Secured to housing via thru-studs.
Door: One-piece die-formed 14-gauge prime
grade material as specified - see ordering information. Corners continuously seam welded
and smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lens: As specified - maximum thickness
.375" - see ordering information.
Ballast: Type as specified - see ordering
information. All ballasts UL listed class P.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL 1570 listed for damp location
applications.
PHOTOMETRICs: For photometric information, go to www.kenall.com.
Lamps: One 9-Watt twin tube compact fluorescent lamp (by others).
DIMENSIONAL DATA
Cross Section
Mounting Holes
3.50"
(89mm)
10.08"
8.62"
(256mm)
(219mm)
1.06"
(27mm)
2.56"
5.12"
(130mm)
6.50"
(165mm)
(65mm)
6.50"
6.50"
(165mm)
5.12"
(130mm)
(165mm)
(3) 1/2" emt holes
(2) .31" dia mtg. holes
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
RFW
A
Nominal Size
A 6" x 9"
Housing/Door Material
0 14 Gauge CRS (Painted)
Lamp Qty
1 One
0
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Ballast Type
NPF Normal Power Factor
PFCPower Factor Corrected
RS Rapid Start Electronic
<10% THD (13Q only)
Ballast Qty
1
One
Fasteners Options 1
1
Lamp Type
7
7 Watt Twin
9
9 Watt Twin
13Q 13 Watt Quad
Lens Inner/Outer
Voltage
120 120 Volts
277 277 Volts
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
Options
FS Single Fuse & Holder
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
57
Mighty Mac®
CC SERIES
Corner Mount surface
HINGED CLAMSHELL
Lamps: CFL, Biax, T8, T5, T5HO
Size: Nominal 9"x12", 9"x24", 9"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: As specified - maximum thickness
.875" - see ordering information.
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Continuous heavy gauge piano type
2' internal hinge (1/2" knuckle/1/8" diameter
pin) standard. Pin secured to knuckle. Hinge
welded to housing and mounts to baseplate
via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Installation: Fixture not suitable for Surface Conduit or Continuous Row Mounting.
PHOTOMETRICs: Efficiency of CC4-0/0-232IS-1-120-1/B-1 = 49%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring k.o.
3.50"
6.00"
(89mm)
(152mm)
9.00"
3.50"
(4) .62" mounting holes
2.00" dia. Wiring k.o.
6.00"
(89mm)
(152mm)
(6) .62" mounting holes
2.00" dia. Wiring k.o.
3.50"
6.00"
(89mm)
(152mm)
(229mm)
8.00"
(203mm)
12.00"
(305mm)
20.00"
21.937"
(508mm)
(557mm)
26.00"
43.87"
(660mm)
(1114mm)
9.00"
50.00"
(229mm)
(1270mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options CC
Nominal Size
1 9" x 12"
2 9" x 24"
4 9" x 48"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Qty
1 One
2 Two
3 Three
* Not available as Base Material
• Not available with F54T5HO
58
Lamp Type - 1’ Nominal Length
13 13 Watt Twin
13Q 13 Watt Quad (2 Lamp Max.)
26Q 26 Watt Quad (2 Lamp Max.)
Lamp Type - 2’ Nominal Length
17 F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
28 F28T5
32 F32T8
54 F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
.125" Clear Polycarbonate
G
.156" Prismatic Polycarbonate
4
R
.156" Prismatic Tempered Glass
.187" Prismatic Polycarbonate
6
7
.187" Clear Polycarbonate
8
.187" Clear Tempered Glass
9
.250" Clear Polycarbonate
A
.250" Clear Tempered Glass
B
.375" Clear Polycarbonate
C
.375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
.750" Clear Tempered Glass
N
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
SK Speaker Housing Extension
TNPL Night Light
(Lamp by others)
(2 Lamp Max.)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
Mighty Mac®
CD SERIES
Corner Mount surface
HINGED door
Lamps: CFL, Biax, T8, T5, T5HO
Size: Nominal 8"x12", 8"x24", 8"x48"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
door: One-piece die-formed prime grade material as specified – see ordering information.
Hinge: Continuous heavy gauge piano type
2' internal hinge (1/2" knuckle/1/8" diameter
pin) standard. Pin secured to knuckle. Hinge
welded to door and secured to housing. See
Options for full length internal hinge (IH4)
(standard on 1' housing).
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: Quantity and type as specified see ordering information. All ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of CD4-0/0-232IS-1-120-1/B-1 = 49%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
2.75"
(70mm)
(4) .62" mounting holes
2.00" dia. Wiring k.o.
8.00"
8.00"
2.75"
(4) .62" mounting holes (70mm)
2.00" dia. Wiring k.o.
8.00"
(203mm)
(203mm)
2.75"
(70mm)
8.00"
(203mm)
(203mm)
6.43"
(163mm)
8.00"
6.43"
(203mm)
(163mm)
12.00"
(305mm)
(6) .62" mounting holes
2.00" dia. Wiring k.o.
8.00"
(203mm)
12.00"
6.43"
(163mm)
21.75"
(552mm)
43.50"
(1105mm)
(305mm)
49.37"
(1254mm)
8.00"
(203mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options CD
Nominal Size
1 8" x 12"
2 8" x 24"
4 8" x 48"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
Lamp Qty
1 One
2 Two
3 Three
*Not available as Door Material
Lamp Type - 1’ Nominal Length
13
13 Watt Twin
13Q 13 Watt Quad (2 Lamp Max.)
26Q 26 Watt Quad (2 Lamp Max.)
Lamp Type - 2’ Nominal Length
17
F17T8
40B F40TT
Lamp Type - 4’ Nominal Length
F28T5
28
32
F32T8
54
F54T5HO
Ballast Type
IS
Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
SB Specified Ballast
Ballast Qty
1
One
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
KO 1/2" EMT Knockout
SK Speaker Housing Extension
TNPL Night Light
(Lamp by others)
(Two Lamp Max.)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
IH4 Full Length Internal Hinge
• Not available with F54T5HO
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
59
Mighty Mac®
Ceiling Mount SURFACE
HINGED CLAMSHELL
Lamps: CFL
Size: Nominal 12"X12"
SSQA SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Hinge: Completely concealed drop slot piano
type internal hinge (1/2" knuckle/1/8" diameter
pin). Pin secured to knuckle. Hinge welded to
housing and mounts to either side of baseplate via keyholes.
Lens: As specified - maximum thickness
.875" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. All lamps supplied by
others.
Ballast: Type as specified - see ordering
information. All ballasts UL listed class P.
Optional removable reflector/lamp/ballast tray
with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SSQA-0/0213-MB-1-120-1/9-1 = 40.5%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
13.00"
(330mm)
7.00"
4.00"
13.00"
(178mm) (330mm)
(102mm)
10.00"
(254mm)
13.50"
(343mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
Ballast
Voltage
Qty
Lens Inner/Outer
Fasteners Options A
SSQ
Nominal Size
A 12" x 12"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One
2 Two
3 Three (13 Watt Twin only)
*Not available as Base Material
60
Lamp
Lamp Ballast
QtyTypeType
Lamp Type
13 13 Watt Twin
13E 13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J .500" Clear Polycarbonate
P .500" Clear Tempered Glass
N .750" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL Standard Lumen EL Pack
PEL High Lumen EL Pack
SEL Specified EL Pack
FS Single Fuse & Holder
TNPL Night Light
(5,7,9 Watt Only)
DLN LED Night Light w/Light
Level Control
UV Ultraviolet Filter
WLWet Location Listed
RGT Removable Gear Tray
Mighty Mac®
SQCA SERIES
Ceiling Mount surface
HINGED CLAMSHELL
Lamps: CFL, HID, Incandescent
Size: Nominal 13"x13"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Clamshell
housing resistant to penetration and contraband concealment.
Baseplate: Prime grade material as specified - see ordering information. Die-formed
blade trap (1/4" minimum) prevents contraband
concealment and access. Embossed standoffs
prevent distortion.
Hinge: Completely concealed drop slot piano
type internal hinge (1/2" knuckle/1/8" diameter
pin). Pin secured to knuckle. Hinge welded to
housing and mounts to baseplate via keyholes.
Lens: As specified - maximum thickness
.875" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. All lamps supplied by
others.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. All HID ballasts UL listed HPF type.
See options listing for alternates. Optional removable reflector/lamp/ballast tray with quick
disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SQCA-0/0113-MB-1-120-1/G-1 = 55.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
13.50"
(343mm)
6.00"
(146mm)
8.00"
13.50"
(203mm) (343mm)
ORDERING INFORMATION
SeriesNominal Hsg./Base
SizeMaterial
SQC
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage Lens †Inner/Outer
Qty
Fasteners Options A
Nominal Size
A 13" x 13"
Housing/Base Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6* 14 Gauge SS (Brushed)
7* 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One (INC, 2D, & HID only)
2 Two
3 Three (13 Watt Twin only)
• Fluorescent Only
* Not available as Base Material
† Glass interior lens required
Lamp Type
13
13 Watt Twin
13E 13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
50S† 50 Watt HPS
70S† 70 Watt HPS
70M† 70 Watt MH
150I† 150 Watt Incandescent
Ballast Type - Fluorescent only
RS
Rapid Start Electronic
<10% THD
Ballast Type - HID only
See Specifications
SB
Specified Ballast
Ballast Qty
One
1
2
Two (Fluorescent only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
N .750" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL•Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS
Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
TNPL Night Light
(5,7,9,13 Watt Only)
DLN LED Night Light w/Light
Level Control
WLWet Location Listed
RGT Removable Gear Tray
(Fluorescent only)
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
61
Mighty Mac®
SQDA SERIES
Ceiling Mount Surface
HINGED door
Lamps: CFL, HID, Incandescent
Size: Nominal 12"x12"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for full length (IH4)
internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. All HID ballasts UL listed HPF type.
See options listing for alternates. Optional removable reflector/lamp/ballast tray with quick
disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SQDA-0/0113-MB-1-120-1/G-1 = 55.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
12.50"
(317mm)
6.50"
(165mm)
6.00" sQ.
(152mm)
12.50" sQ.
(317mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
Ballast
Voltage Lens †Inner/Outer
Qty
Fasteners Options A
SQD
Nominal Size
A 12" x 12"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
62
Lamp
Lamp Ballast
QtyTypeType
Lamp Type
13
13 Watt Twin
13E 13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
50S† 50 Watt HPS
70S† 70 Watt HPS
70M† 70 Watt MH
150I† 150 Watt Incandescent
Lamp Quantity
1 One (INC, 2D, & HID only)
2 Two
3 Three (13 Watt Twin only)
Ballast Type - Fluorescent only
RS
Rapid Start Electronic
<10% THD
Ballast Type - HID only
See Specifications
SB
Specified Ballast
*Not available as Door Material
• Fluorescent Only
† Glass interior lens required
Ballast Qty
1
One
2
Two (Fluorescent only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
Lens (Inner/Outer)
0
No Lens
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
TNPL Night Light
(5,7,9,13 Watt Only)
DLN LED Night Light w/Light
Level Control
WLWet Location Listed
RGT Removable Gear Tray
(Fluorescent only)
IH4 Full Length Internal Hinge
Mighty Mac®
SQDB SERIES
Ceiling Mount SURFACE
HINGED door
Lamps: CFL, HID, Incandescent
Size: Nominal 16"x16"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for full length (IH4)
internal hinge.
Lens: As specified - maximum thickness
.625" - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. All HID ballasts UL listed HPF type.
See options listing for alternates.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others. Medium base socket for incandescent
and HID applications.
PHOTOMETRICs: Efficiency of SQDB-1/1175M-1-120-A/1-1 = 53.8%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
16.50"
(419mm)
9.00" sQ.
16.50" sQ.
8.00"
(229mm)
(203mm)
(419mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
SQD
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options B
Nominal Size
B 16" x 16"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
Lamp Quantity
1 One (INC, 2D, & HID only)
2 Two
3 Three
* Not available as Door Material
• Fluorescent Only
† Glass interior lens required
Lamp Type
13
13 Watt Twin
13 Watt (4) Pin Twin
13E
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
50S† 50 Watt HPS
50M† 50 Watt MH
70S† 70 Watt HPS
70M† 70 Watt MH
100S† 100 Watt HPS
100M† 100 Watt MH
150S† 150 Watt HPS
175M† 175 Watt MH
150I† 150 Watt Incandescent
Ballast Type - Fluorescent only
Rapid Start Electronic
RS
<10% THD
Ballast Type - HID only
See Specifications
SB
Specified Ballast
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
Lens (Inner/Outer)
No Lens
0
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
DP Drop Dish Polycarbonate
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
WLWet Location Listed
RGT Removable Gear Tray
(Fluorescent only)
IH4 Full Length Internal Hinge
Ballast Qty
One
1
2
Two (Fluorescent only)
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
63
Mighty Mac®
Ceiling Mount SURFACE
HINGED door
Lamps: HID, Induction
Size: Nominal 20"x20"
SQDC SERIES
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Door: One-piece die-formed prime grade material as specified - see ordering information.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for full length (IH4)
internal hinge.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others. Mogul base socket.
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: UL listed HPF type 150 Watt
induction fluorescent system (150IND) UL
listed and approved for use with Icetron™
lamp/ballast by Osram Sylvania. See options
for alternates.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SQDC-1/1250M-1-120-A/1-1 = 53.4%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
20.50"
(521mm)
13.00" sQ.
(330mm)
20.50" sQ.
10.00"
(254mm)
(521mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
C
SQD
Nominal Size
C 20" x 20"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2**18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
Lamp Quantity
1 One
**Not available as Door Material
† Glass interior lens required
* Product UL listed and approved for
use with Icetron™ lamp/ballast by
Osram Sylvania.
64
Lamp
Lamp Ballast
QtyTypeType
1
Lamp Type
100S† 100 Watt HPS
150S† 150 Watt HPS
175M† 175 Watt MH
250S† 250 Watt HPS
250M† 250 Watt MH
150IND*150 Watt Induction
Fluorescent
Ballast Type
See Specifications
Specified Ballast
SB
Ballast Qty
1
One
Voltage
120 277 347 DT
QT
120 Volts
277 Volts
347 Volts
120/277 Volts (HID only)
120/208/240/277 Volts
NA
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options 1
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
WLWet Location Listed
IH4 Full Length Internal Hinge
Mighty Mac®
SQDD SERIES
Ceiling Mount SUrface
HINGED door
Lamps: HID
Size: Nominal 24"x24"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade material as specified - see ordering information.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Staked and welded external piano
type hinge (1/2" knuckle/1/8" diameter pin)
standard. See Options for full length (IH4)
internal hinge.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others. Mogul base socket.
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: UL listed HPF type. See options for
alternates.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications.
PHOTOMETRICs: Efficiency of SQDD-1/1400M-DT-A/1-1 = 56.9%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" mounting holes
2.00" dia. Wiring hole
24.50"
(622mm)
17.00" sQ.
24.50" sQ.
(432mm)
12.00"
(305mm)
(622mm)
ORDERING INFORMATION
SeriesNominal Hsg./Door
SizeMaterial
SQD
Lamp
Lamp Ballast
QtyTypeType
D
Nominal Size
D 24" x 24"
Housing/Door Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
Lamp Quantity
1 One
* Not available as Door Material
† Glass interior lens required
1
Lamp Type
150S† 150 Watt HPS
175M† 175 Watt MH
250S† 250 Watt HPS
250M† 250 Watt MH
400S† 400 Watt HPS
400M† 400 Watt MH
Ballast Type
See Specifications
SB Specified Ballast
Ballast Qty
1 One
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts
QT 120/208/240/277 Volts
NA
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options 1
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
WLWet Location Listed
IH4 Full Length Internal Hinge
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
65
Mighty Mac®
RQCA SERIES
Ceiling Mount recessed
HINGED doorframe
Lamps: CFL, HID, Incandescent
Size: Nominal 12"x12"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material as specified - see ordering information.
Lapped and spot welded construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to housing via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). Pin secured to knuckle.
Hinge welded to door and mounts to either
side of housing via keyholes.
Lens: As specified - maximum thickness
.625" - see ordering information.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. All lamps supplied by
others. Medium base socket on incandescent
and HID lamps.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. All HID ballasts UL listed HPF type.
See options listing for alternates. Optional removable reflector/lamp/ballast tray with quick
disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated. See security detention
Recessed Installation Technical Data Sheet.
PHOTOMETRICs: Efficiency of RQCA-0/0113-MB-1-120-1/G-1 = 55.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) 1.25" x .75 obrounds
(3) 1/2" emt k.o.'s
5.00"
(127mm)
8.00"
12.00"
(203mm) (305mm)
13.50"
(343mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
RQC
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options A
Nominal Size
A 12" x 12"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9**12 Gauge CRS (Painted)
Lamp Quantity
1 One (INC, 2D, & HID only)
2 Two
3 Three (13 Watt Twin only)
*Not available as Door Material
** Not available with Hsg. Material
† Glass interior lens required
• Fluorescent Only
66
Lamp
Lamp Ballast
QtyTypeType
Lamp Type
13
13 Watt Twin
13 Watt (4) Pin Twin
13E
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
50S† 50 Watt HPS
70S† 70 Watt HPS
70M† 70 Watt MH
150I† 150 Watt Incandescent
Ballast Type - Fluorescent only
RS
Rapid Start Electronic
<10% THD
Ballast Type - HID only
See Specifications
SB
Specified Ballast
Ballast Qty
1One
2Two (Fluorescent only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
TNPL Night Light
(5,7,9,13 Watt Max.)
DLN LED Night Light w/Light
Level Control
WLWet Location Listed
PFPlaster Frame
CC Cross Channels
YF Yoke Frame Mounting Kit
RGT Removable Gear Tray
(Fluorescent Only)
Mighty Mac®
RQCB SERIES
Ceiling Mount recessed
HINGED doorframe
Lamps: CFL, HID, Incandescent
Size: Nominal 16"x16"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material as specified - see ordering information.
Lapped and spot welded construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). Pin secured to knuckle.
Hinge welded to door and mounts to either
side of housing via keyholes.
Lens: As specified - maximum thickness
.625" - see ordering information.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others. Medium base socket on incandescent and
HID lamps.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. All HID ballasts UL listed HPF type.
See options listing for alternates.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated. See security detention
Recessed Technical Data Sheet.
PHOTOMETRICs: Efficiency of RQCB-1/1175M-1-120-A/4-1 = 47.9%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" dia. mounting holes
(2) 1/2" emt k.o.'s
7.50"
(190mm)
9.00" sQ.
(229mm)
15.75" sQ.
(400mm)
16.50"
(419mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
RQC
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options B
Nominal Size
B 16" x 16"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9**12 Gauge CRS (Painted)
Lamp Quantity
1 One (INC, 2D, & HID only)
2 Two
3 Three
*Not available as Door Material
** Not available as Hsg. Material
† Glass interior lens required
• Fluorescent Only
Lamp Type
13 Watt Twin
13
13E
13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
50S† 50 Watt HPS
50M† 50 Watt MH
70S† 70 Watt HPS
70M† 70 Watt MH
100S† 100 Watt HPS
100M† 100 Watt MH
150S† 150 Watt HPS
150I† 150 Watt Incandescent
Ballast Type - Fluorescent only
RS
Rapid Start Electronic
<10% THD
Ballast Type - HID only
See Specifications
SB
Specified Ballast
Ballast Qty
1
One
2
Two (Fluorescent only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
Lens (Inner/Outer)
No Lens
0
1
.125" Prismatic Acrylic
2
.125" Prismatic Polycarbonate
3
.125" Textured Polycarbonate
G .125" Clear Polycarbonate
4
.156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6
.187" Prismatic Polycarbonate
7
.187" Clear Polycarbonate
.187" Clear Tempered Glass
8
9
.250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P
.500" Clear Tempered Glass
DP Drop Dish Polycarbonate
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
WLWet Location Listed
PFPlaster Frame
CC Cross Channels
YF Yoke Frame Mounting Kit
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
67
Mighty Mac®
RQCD SERIES
Ceiling Mount recessed
HINGED doorframe
Lamps: HID
Size: Nominal 24"x24"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed prime grade material as specified - see ordering information.
Lapped and spot welded construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). Pin secured to knuckle.
Hinge welded to door and mounts to either
side of housing via keyholes.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others. Mogul base socket.
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: HID ballast UL listed HPF type.
See options listing for alternates.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated. See security detention
Recessed Installation Technical Data Sheet.
PHOTOMETRICs: Efficiency of RQCD-1/1400M-DT-A/1-1 = 54.5%. For additional photometric information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(4) .62" Dia. Mounting Holes
(2) 1/2" EMT K.O.'S
12.25"
(311mm)
17.00" SQ.
(432mm)
23.25" SQ.
(590mm)
24.00"
(610mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
RQC
1
D
Nominal Size
D 24" x 24"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
2* 18 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6**14 Gauge SS (Brushed)
7**16 Gauge SS (Brushed)
9**12 Gauge CRS (Painted)
Lamp Quantity
1 One
*Not available as Door Material
** Not available with Hsg. Material
† Glass interior lens required
68
Lamp
Lamp Ballast
QtyTypeType
Lamp Type
150S† 150 Watt HPS
175M† 175 Watt MH
250S† 250 Watt HPS
250M† 250 Watt MH
320M† 320 Watt MH
400S† 400 Watt HPS
400M† 400 Watt MH
Ballast Type
See Specifications
SB
Specified Ballast
Ballast Qty
1
One
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT
120/277 Volts
QT
120/208/240/277 Volts
NA
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options 1
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
1 Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
FS Single Fuse & Holder
QR Hot restrike system for
maximum 100-Watt
DC Bayonet Quartz Lamp
QSQuartz Socket Only
WLWet Location Listed
PFPlaster Frame
CC Cross Channels
YF Yoke Frame Mounting Kit
Mighty Mac®
RQPA SERIES
Ceiling Mount RECESSED
HINGED doorframe
Lamps: CFL, Incandescent
Size: Nominal 12"X12"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed 16 gauge galvanized
prime grade material. Lapped and spot welded
construction.
Lens Retention: Vertically adjustable continuous “Z” brackets - prime grade material.
Secured to door via thru-studs.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Hinge: Completely concealed spring loaded
drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). Pin secured to knuckle.
Hinge welded to door and mounts to either
side of housing via keyholes.
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RQPA-0/0113-MB-1-120-1/G-1 = 55.6%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
(3) 1/2" emt k.o.'s
16.00"
(406mm)
5.00"
(127mm)
12.00"
(305mm)
13.50"
(343mm)
16.00"
(406mm)
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
RQP
A
Nominal Size
A 12" x 12"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One (INC & 2D only)
2 Two
3 Three (13 Watt Twin only)
† Glass interior lens required
• Fluorescent Only
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options NA
Lamp Type
13 13 Watt Twin
13E 13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
150I†150 Watt Incandescent
Ballast Type
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
One
1
2
Two
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL• High Lumen EL Pack
SEL• Specified EL Pack
FS Single Fuse & Holder
TNPL Night Light
(5,7,9 Watt Only)
DLN LED Night Light w/Light
Level Control
WLWet Location Listed
RGT Removable Gear Tray
(Fluorescent Only)
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
69
Mighty Mac®
RQPB SERIES
Ceiling Mount recessed
secured doorframe
Lamps: CFL, Incandescent
Size: Nominal 16"x16"
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: Die-formed 16 gauge galvanized
prime grade material. Lapped and spot welded
construction.
Lens Retention: Vertically adjustable continuous “L” brackets - prime grade material.
Secured to door via screws.
Door: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG). Door
secured to housing with stainless steel aircraft
cables.
Fasteners: Hardened security screws as
specified - see ordering information. Fully
recessed.
Lens: As specified - maximum thickness
.625" - see ordering information.
Ballast: Type as specified - see ordering
information. All fluorescent ballasts UL listed
class P. Optional removable reflector/lamp/ballast tray with quick disconnect.
Luminous Seal: Polyurethane foam prevents light leaks from luminaire base.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Listings: UL listed for damp locations. See
ordering information for wet location applications. Non IC rated.
Lamps: Quantity and type as specified - see
ordering information. Lamps supplied by others.
PHOTOMETRICs: Efficiency of RQPB-1/1213-MB-1-120-1/9-1 = 53.1%. For additional
photometric information, go to www.kenall.
com.
DIMENSIONAL DATA
Cross Section
Mounting Holes
16.12"
(409mm)
OUTER FLANGE
15.00"
(381mm)
HOUSING
5.00"
(127mm)
16.25"
(413mm)
19.25"
(489mm)
MOUNTING FLANGE
ORDERING INFORMATION
SeriesNominal Door/Hsg.
SizeMaterial
B
RQP
Nominal Size
B 16" x 16"
Door/Housing Material
0 14 Gauge CRS (Painted)
1 16 Gauge CRS (Painted)
3 14 Gauge SS (Painted)
4 16 Gauge SS (Painted)
6 14 Gauge SS (Brushed)
7 16 Gauge SS (Brushed)
9 12 Gauge CRS (Painted)
Lamp Quantity
1 One (INC & 2D only)
2 Two
3 Three (13 Watt Twin only)
† Glass interior lens required
• Fluorescent Only
70
Lamp
Lamp Ballast
QtyTypeType
Ballast
Voltage Lens Qty
†Inner/Outer
Fasteners Options NA
Lamp Type
13 13 Watt Twin
13E 13 Watt (4) Pin Twin
13Q 13 Watt Quad
26Q 26 Watt Quad
28D 28 Watt 2D
38D 38 Watt 2D
150I†150 Watt Incandescent
Ballast Type - Fluorescent only
RS Rapid Start Electronic
<10% THD
SB Specified Ballast
Ballast Qty
1
One
2
Two (Fluorescent only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lens (Inner/Outer)
0 No Lens
1 .125" Prismatic Acrylic
2 .125" Prismatic Polycarbonate
3 .125" Textured Polycarbonate
G .125" Clear Polycarbonate
4 .156" Prismatic Polycarbonate
R .156" Prismatic Tempered Glass
6 .187" Prismatic Polycarbonate
7 .187" Clear Polycarbonate
8 .187" Clear Tempered Glass
9 .250" Clear Polycarbonate
A .250" Clear Tempered Glass
B .375" Clear Polycarbonate
C .375" Clear Tempered Glass
J
.500" Clear Polycarbonate
P .500" Clear Tempered Glass
DP Drop Dish Polycarbonate
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Fasteners
Torx® Head w/ Center Pin
1
2Allen Head w/ Center Pin
Options
EL• Standard Lumen EL Pack
PEL•High Lumen EL Pack
SEL•Specified EL Pack
FS Single Fuse & Holder
WLWet Location Listed
RGT Removable Gear Tray
(Fluorescent Only)
Mighty Mac®
WSP/WPP SERIES
Wall plates
surface and concrete pour
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Fasteners: Flat head POSIGRIP™ hardened
security screws. See Ordering Information for
additional options.
Cover Plate: One-piece heavy gauge prime
grade material as specified - see ordering
information. Die formed with four countersunk
holes for security fasteners.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%. See ordering information
for additional finish options.
Backplate: Prime grade 11-gauge galvanized steel.
DIMENSIONAL DATA
3.74"
5.54"
(95mm)
.5"
7.34"
(141mm)
Listings: UL listed.
Electrical devices and junction boxes supplies
by others. Consult factory for larger size/
”Gang Plates”.
Devices
(13mm)
(186mm)
5.50"
(139mm)
Single Gang
Duplex
Receptacle
GFI Duplex
Receptacle
Switch
TV/Telephone
Outlet
Touch Control
(Remote Device)
Blank
Triple Gang
Double Gang
J-Box
J-Box
Backplate
Backplate
Electrical
Device
Electrical
Device
Wall Plate
Wall Plate
ORDERING INFORMATION
SeriesMaterial
WSPWall Surface Mount Plate
WPPWall Pour-in-Place Plate
Material
A
10 Gauge CRS (Painted)
0
14 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
6
14 Gauge SS (Brushed)
Gang Size
Devices
FastenersOptions
Gang Size
1
Single Gang (1 Device Max.)
2
Double Gang (2 Devices Max.)
3
Triple Gang (3 Devices Max.)
Devices
BBlank
D
Duplex Receptacle
G
GFCI Duplex Receptacle
Single Round Receptacle
N
S
Switch
T
TV/Telephone Outlet
(specify hole size)
TC Touch Control
(Consult Factory)
Accessories
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
IVY
Ivory Color
Accessories
D-0418POSIGRIP™ Screwdriver
D-0377Allen Head Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
71
Mighty Mac®
MMEX SERIES
Wall/ceiling mount
indirect led
SINGLE and Double face
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Housing: One-piece die-formed prime grade
material as specified - see ordering information. Corners continuously seam welded and
smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade
14-gauge CRS. Corners continuously seam
welded and smooth with no post grinding
(TIG).
Legend: Legend illuminated by internal high
output LEDs. Lettering six inches high with
.750 inch stroke. Internal panels with stencil
cut letters and red or green filter panel. External panel .188 inch thick clear polycarbonate.
Universal arrows.
Electrical: Meets all UL requirements for
Green and Red LED technology in regards to
nanometer wavelength, MAX/MIN ratios and
footlamberts in both AC and DC modes.
Options: Sealed nickel-cadmium Emergency
Battery Pack (EL) with standard battery conditioning, self test and self diagnostic circuitry,
remote laser activated test switch, protected
mechanical test switch and status indicator.
Provides 120 minutes of emergency operation. Emergency Battery Pack (EL) suitable for
50ºF to 113ºF. Cold Weather Emergency Battery Pack (CEL) suitable for -49ºF to 113ºF.
Fasteners: Hardened security screws as
specified - see ordering information.
Finish: TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%. See Options for black
exterior.
DIMENSIONAL DATA
Cross Section
Single Face
Listings: UL listed for Wet Location.
Mounting Details
5.44"
(138mm)
14.53"
(369mm)
7.00"
(178mm)
14.53"
(369mm)
5.44"
(138mm)
4.00"
(102mm)
8.44"
(214mm)
7.00"
(178mm)
11.96"
(304mm)
4.00"
11.40"
(290mm) (102mm)
5.44"
4.00"
(138mm) (102mm)
(4) .31" Dia. KOs
2.78"
(70mm)
5.44"
(138mm)
Back Mount
8.44"
(214mm)
7.00"
(178mm)
End Mount
8.44"
(214mm)
5.44"
4.00"
(138mm) (102mm)
7.00"
11.40"
(290mm) (178mm)
(4) .31" Dia. KOs
3.07"
(78mm)
7.00"
11.40"
(290mm) (178mm)
5.44"
(138mm)
4.00"
(102mm)
14.53"
(369mm)
11.96"
(304mm)
(4) .31" Dia. KOs
(4) 1/2" EMT KOs
Top Mount
Double Face
8.44"
(214mm)
(3) 1/2" EMT KOs
Top Mount
End Mount
ORDERING INFORMATION
Series
FaceMaterial
Letter Color
Voltage
FastenersOptions
MMEX
Face
1
2
Single Face
Double Face
Material
0
14 Gauge CRS (Painted)
3
14 Gauge SS (Painted)
6
14 Gauge SS (Brushed)
72
Letter Color
G Green
R Red
Voltage
120 120 Volts
277 277 Volts
Fasteners
1
Torx® Head w/ Center Pin
2Allen Head w/ Center Pin
Options
EL
Standard Lumen EL Pack
Cold Weather EL Pack
CEL
XACAuxiliary AC Supply
(specify X120 or X277 Volt)
XDCAuxiliary DC Supply
(specify X6, X12 or X24 Volt)
BLKBlack Exterior
Accessories
LP
Laser Pointer
9500POSIGRIP™ Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Millenium Metrex™
METSW SERIES
Wall mount
INDIRECT LED
SINGLE face
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Shield: U.V. stabilized, high impact, injection
molded clear polycarbonate. Nominal thickness .125". Captive stainless steel POSIGRIP™ fasteners secure shield to housing.
Continuous closed cell silicone gasket seals
shield to housing.
Legend: Legend illuminated by internal high
output LEDs. Lettering six inches high with
.750 inch stroke. Polycarbonate red or green
filter panels. High impact, injection molded
polycarbonate stencil and field selectable
chevron inserts.
mechanical test switch and status indicator.
Provides 120 minutes of emergency operation; 60 minutes with CSA option. Emergency
Battery Pack (EL) suitable for 50ºF to 113ºF.
Cold Weather Emergency Battery Pack (CEL)
suitable for -49ºF to 113ºF.
Housing: High impact, injection molded
polycarbonate. Housing provided with fourpoint mounting holes, one wireway hole and
temporary junction box mounting drill points
– see Cross Section/Details. Closed cell diecut Neoprene gasket seals housing to mounting surface.
Electrical: Electrical components mounted
to removable high impact, injection molded
polycarbonate chassis. Drill points provided for
optional surface conduit entry.
Options: Sealed nickel-cadmium Emergency
Battery Pack (EL) with standard battery conditioning, self test and self diagnostic circuitry,
remote laser activated test switch, protected
Listings/Certifications: UL and CUL
listed for Wet Locations. UL Classified IP64.
Meets or exceeds UL924 and NFPA 101
standards. Optional CSA Certified and labeled.
Meets or exceeds CSA C22.2 No. 141, C86001 and NRCAN/C860-01 requirements.
DIMENSIONAL DATA
Cross Section
Installation: Standard four-point mounting
required for Peace of Mind Lifetime Guarantee™.
Baseplate Mounting View
14.00"
(356mm)
7.00"
(178mm)
3.27"
(83mm)
8.80"
(224mm)
4.00"
(102mm)
(4) .31" Mounting Holes
.875" Dia. Hole
ORDERING INFORMATION
Series
Finish
Legend Color
VoltageOptions
Accessories
METSW
Finish
MBMatte Black Exterior
MWMatte White Exterior
Legend Color
R
Red
G
Green
Voltage
DT 120/277 Volts
DTC*120/347 Volts
* Available only with CSA Option.
Options
EL Standard Lumen EL Pack
CEL Cold Weather EL Pack
XACAuxiliary AC Supply
(matches voltage selection)
XDCAuxiliary DC Supply (6/12/24 volts)
CSA Certified and Labeled to Comply with
Canadian Standards
Accessories
LP Laser Pointer
9500POSIGRIP™ Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
73
Millenium Metrex™
METSU AND METDU SERIES
Wall/ceiling mount
INDIRECT LED
SINGLE and Double face
PROJECT INFORMATION
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Shield: U.V. stabilized, high impact, injection
molded clear polycarbonate. Nominal thickness .125". Captive stainless steel POSIGRIP™ fasteners secure shield to housing.
Continuous closed cell silicone gasket seals
shield to housing.
Housing: High impact, injection molded
polycarbonate. Housing provided with canopy
mounting and wireway drill points top and side
– see Cross Section/Details. Closed cell diecut Neoprene gasket seals housing to canopy.
Canopy: High impact, injection molded
polycarbonate canopy cover with heavy gauge
galvanized steel mounting plate with integral
1/4-20 threaded studs. Canopy mounting plate
provided with four-point mounting holes, one
Legend: Legend illuminated by internal high
output LEDs. Lettering six inches high with
.750 inch stroke. Polycarbonate red or green
filter panels. High impact, injection molded
polycarbonate stencil and field selectable
chevron inserts.
Listings/Certifications: UL and CUL
listed for Wet Locations. UL Classified IP64.
Meets or exceeds UL924 and NFPA 101
standards. Optional CSA Certified and labeled.
Meets or exceeds CSA C22.2 No. 141, C86001 and NRCAN/C860-01 requirements.
Electrical: Electrical components mounted
to removable high impact, injection molded
polycarbonate chassis. Drill points provided for
optional conduit entry.
Options: Sealed nickel-cadmium Emergency
Battery Pack (EL) with standard battery conditioning, self test and self diagnostic circuitry,
DIMENSIONAL DATA
Cross Section
Ceiling Mount
Installation: Standard four-point mounting
required for Peace of Mind Lifetime Guarantee™.
Ceiling Canopy Mounting View
8.80"
(224mm)
7.00"
(178mm)
8.80"
(224mm)
7.00"
(178mm)
9.55"
(243mm)
9.55"
(243mm)
4.04"
(103mm)
3.27"
(83mm)
remote laser activated test switch, protected
mechanical test switch and status indicator.
Provides 120 minutes of emergency operation; 60 minutes with CSA option. Emergency
Battery Pack (EL) suitable for 50ºF to 113ºF.
Cold Weather Emergency Battery Pack (CEL)
suitable for -49ºF to 113ºF.
wireway hole and temporary junction box
mounting holes. Closed cell die-cut Neoprene
gasket seals canopy to mounting surface.
4.00"
(102mm) 5.80"
(147 mm)
4.00"
(102mm) 5.80"
(147 mm)
.31" Mounting Holes
2.00" Dia.(4)
Hole
(4) .31" Mounting Holes
14.00"
(356mm)
14.00"
(356mm)
2.00" Dia. Hole
METSU Single FaceMETDU Double Face
End Canopy Mounting View
End Mount
5.80"
(147 mm)
4.00"
(102mm)
4.00"
(102mm)
4.04"
(103mm)
8.80"
(224mm)
8.80"
(224mm)
8.80"
(224mm)
8.80"
(224mm)
3.27"
(83mm)
5.80"
(147 mm)
7.00"
(178mm)
(4) 14.75"
.31" Mounting Holes
(375mm)
14.75"
(375mm)
(4) .31" Mounting Holes
2.00" Dia. Hole
7.00"
(178mm)
2.00" Dia. Hole
METSU Single FaceMETDU Double Face
ORDERING INFORMATION
Series
Finish
METSU Single Face
METDU Double Face
Finish
MBMatte Black Exterior
MWMatte White Exterior
Legend Color
VoltageOptions
Legend Color
R
Red
G
Green
Voltage
DT 120/277 Volts
DTC*120/347 Volts
* Available only with CSA Option.
Accessories
Options
EL Standard Lumen EL Pack
CEL Cold Weather EL Pack
XACAuxiliary AC Supply
(matches voltage selection)
XDCAuxiliary DC Supply (6/12/24 volts)
CSA Certified and Labeled to Comply with
Canadian Standards
Accessories
LP Laser Pointer
9500POSIGRIP™ Screwdriver
74
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Nova I™
N548 Series (7100)
Ceiling/wall mount/surface
Lamps: Biax, T8, T5
Size: Nominal 5"x48"
PROJECT INFORMATION
Width Length
5"
49.5"
Depth
4.5"
Job Name
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Listings/Certifications: UL and CUL listed for Damp Locations – wall mount. UL and
CUL listed for Wet Location – covered ceilings
only. U.S. Patent Nos. 246330; 4025780.
Lens/Housing: One-piece wraparound lens/
housing with ten alignment security tabs for
baseplate engagement (U.V. stabilized, high
impact, virgin injection molded polycarbonate).
Clear Prismatic refractor. Nominal thickness
.125".
Electrical: Class P ballasts. Fluorescent
electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute
nickel-cadmium battery pack (EL) includes
inverter charger, test switch and charging
indicator lamp – indoor use only.
Baseplate: 16-gauge CRS. Baseplate
provided with eight-point mounting holes and
one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Sockets: Shock-resistant sockets with
internal locking collar to ensure positive lamp
retention.
Installation: Eight-point mounting
required for Peace of Mind Lifetime Guarantee™. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without
special adapter.
Gasket: Die-cut closed cell neoprene gasket
seals lens/housing to mounting surface.
PHOTOMETRICs: For additional photometric
information, go to www.kenall.com.
Hardware: Six stainless steel POSIGRIP™
fasteners secure lens/housing to baseplate.
DIMENSIONAL DATA
Cross Section
Baseplate
Convenience Outlet (CO)
Internal Reflector (IR)
4.75"
(121mm)
49.38”
13.97”
4.50"
(114mm)
4.75”
(343mm)
13.97”
(355mm)
2.25”
2" Dia.
(121mm)
(8) .41" Dia. Mounting Holes
Lens Tw ist-out and
Wireway 1/2" EMT KO
(1254mm)
13.5”
(355mm)
(57mm)
6.75”
(171mm)
6.75”
(171mm)
Corner Mounting Adapter (CM)
(2) 1/2" EMT 3.38”
(86mm)
KOs
.5”
(76mm)
2.25”
(4) 1/4-20 Weld Nuts
4.8”
(122mm)
2”
3”
(628mm)
3.38”
(86mm)
49.44”
(1256mm)
24.72”
(13mm)
(57mm)
2”
(51mm)
41.44”
(6) .38" Holes
21.72”
(1053mm)
(552mm)
(51mm)
21.72”
(552mm)
ORDERING INFORMATION
Series
Lens
Type
N548
Lamp
Lamp Ballast
QtyTypeType
Ballast
Qty
VoltageOptions Accessories C
Lens Type
C Clear Prismatic
Lamp Qty
1
One Lamp
2
Two Lamps
Lamp Type
28 F28T5 (One lamp only)
32 F32T8
40B F40TT
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5)
CW Cold Weather
SB Specified Ballast
Ballast Qty
1
One
T
Tandem Wiring
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DV 120/277 Volts (<10% THD),
electronic ballasts only
Options
CO Convenience Outlet Non GFI Receptacle (Wall Mount) 120 Volts only
EL T-8 One-Lamp Indoor
Battery Pack (32ºF)
EL2 T-8 1100 Lumen One-Lamp
Indoor Battery Pack (32ºF)
FS Single Fuse & Holder
IR Internal Reflector (Wall Mount)
PSPush Switch (Wall Mount)
TN 5 Watt Twin Tube
NPF Night Light
Accessories
CM Corner Mount Adapter –
Damp Locations only
CMW Corner Mount Adapter –
Wet Location Covered
Ceiling only
SA
Surface Adapter –
Wet Location Covered
Ceiling only
9500POSIGRIP™ Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
75
Nova II™
N1048 Series (7200)
Ceiling Mount/SURFACE
Lamps: Biax, T8, T5
Size: Nominal 10"x48"
PROJECT INFORMATION
Width Length
9.25" 51"
Job Name
Depth
3.25"
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens/Housing: One-piece wraparound lens/
housing with ten alignment security tabs for
baseplate engagement (U.V. stabilized, high
impact, virgin injection molded polycarbonate).
High efficiency Clear Prismatic or Pearlescent
refractor. Nominal thickness .125".
Electrical: Class P ballasts. Fluorescent
electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute
nickel-cadmium battery pack (EL) includes
inverter charger, test switch and charging
indicator lamp – indoor use only.
Hardware: Two stainless steel POSIGRIP™
fasteners secure lens/housing to baseplate.
Baseplate: 16-gauge CRS. Baseplate
provided with six-point mounting holes and
one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%.
Sockets: Shock-resistant sockets with
internal locking collar to ensure positive lamp
retention.
Installation: Six-point mounting required
for Peace of Mind Lifetime Guarantee™.
“Twist-out” sections, with gaskets, permit
1/2" conduit access on each end without
special adapter.
DIMENSIONAL DATA
Cross Section
Gasket: Die-cut closed cell neoprene gasket
seals lens/housing to mounting surface.
Baseplate
(235mm)
PHOTOMETRICs: For additional photometric
information, go to www.kenall.com.
2" dia. Wireway hole
50.75”
9.25”
(1289mm)
3.25”
(83mm)
Listings/Certifications: UL and CUL
listed for Wet Location – covered ceilings
only.
9.25”
7”
(235mm)
(178mm)
20”
20”
(508mm)
Corner Mounting Adapter (CM)
(4) .38” dia.
mounting holes
508mm
(2) mounting keyholes
50.75”
(2) 1/2" emt
kos
6.9”
(175mm)
6.9”
25.38”
(508mm)
(10) .38" holes
(175mm)
(1289mm)
20”
.5”
(13mm)
(645mm)
7”
(6) 1/4-20 Weld nuts
4”
(102mm)
(178mm)
9.75”
(248mm)
2”
(51mm)
1”
12.68”
11.68”
(25mm)
(297mm)
24.38”
(322mm)
(619mm)
12.68”
(322mm)
11.68”
24.38”
(297mm)
1”
(25mm)
(619mm)
ORDERING INFORMATION
Series
Lens
Type
Lamp
Lamp Ballast
QtyTypeType
Ballast
Qty
VoltageOptions Accessories N1048
Lens Type
C Clear Prismatic
PPearlescent
Lamp Qty
2
Two Lamps
3
Three Lamps (T8 only)
4
Four Lamps
Lamp Type
28 F28T5 (Two lamps only)
32 F32T8
40B F40TT
76
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5)
CW Cold Weather
SB Specified Ballast
Ballast Qty
1
One
2
Two
T
Tandem Wiring
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DV 120/277 Volts (<10% THD),
electronic ballasts only
Options
EL T-8 One-Lamp Indoor
Battery Pack (32ºF)
FS Single Fuse & Holder
MS6Six Maximum Security
Flange Retainer Clips
TN 5 Watt Twin Tube
NPF Night Light
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Accessories
CMCorner Mount Adapter (682)
Damp Locations only
SASurface Adapter (7200A)
9500POSIGRIP™ Screwdriver
Sheriff™
SH524 and SH548 SERIES
Ceiling/Wall Mount/Surface
Lamps: Biax, T8, T5, T5HO
Size: Nominal 5"x24" and 5"x48"
PROJECT INFORMATION
Width Length
5.14" 24.75"
5.14" 48.75"
Job Name
Depth
3.75"
3.75"
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: Cold formed .156" P12 polycarbonate
lens. See Options for alternate lenses.
Baseplate: One-piece 16-gauge CRS baseplate with welded corners. Baseplate provided
with four-point (2 foot) or six-point (4 foot)
mounting holes and one wireway hole – see
Cross Section/Details. TGIC polyester powder
coat – 5-stage pre-treatment. Salt spray test:
1,000 hours; Reflectance: 92%. Lens is
positioned in baseplate channels and retained
with stainless steel POSIGRIP™ fasteners
(two fasteners/2 foot; six fasteners/4 foot).
Baseplate/end caps mount flush to ceiling or
wall surface.
Electrical: Class P ballasts. Fluorescent
electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute
nickel-cadmium battery pack (EL) includes
inverter charger, test switch and charging
indicator lamp – indoor use only.
Sockets: Shock-resistant sockets with
internal locking collar to ensure positive lamp
retention.
Hardware: Stainless steel POSIGRIP™
fasteners secure lens in baseplate channel.
Listings/Certifications: UL and CUL
listed for Damp Locations – wall mount. UL
and CUL listed for Wet Location – covered
ceilings only.
Installation: Four-point (2 foot) or sixpoint (4 foot) mounting required for Peace of
Mind Lifetime Guarantee™.
PHOTOMETRICs: For additional photometric
information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Baseplate
4' unit
48.75"
2' unit
24.75"
32.00"
16.00"
24.00"
n/a
(1238mm) (628mm)
5.14"
(813mm) (406mm)
(130mm)
(610mm)
3.75"
(95mm)
3.75"
5.14"
(95mm)
(130mm)
4' unit (2) 1/2" emt kos
n/a
2' unit
2" dia. ko
.75" x 1.5" oblong hole
(6) .31" dia. holes
(4) .31" dia. holes
ORDERING INFORMATION
Series
Length Lamp
Lamp Ballast
QtyTypeType
Ballast
VoltageOptions Qty
Accessories
SH5
Nominal Length
24 2’
48
4’
Lamp Qty
1
One Lamp
2
Two Lamps
3
Three Lamps
* Available with one lamp only
Lamp Type
Two Foot Lengths
14* F14T5
17 F17T8 (2’ only)
40B F40TT (1)
Four Foot Lengths
28* F28T5
32 F32T8 (4’ only)
54* F54T5HO
40B F40TT (2)
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (CFL, T8, T5, T5HO)
CW Cold Weather
SB Specified Ballast
Ballast Qty
1
One
2
Two
T
Tandem Wiring
(Consult factory)
Voltage
120 120 Volt
277 277 Volt
347 347 Volt
DV 120/277 Volts (<10% THD),
electronic ballasts only
Options
.187 .187" P12 Polycarbonate Lens
OP Opal Polycarbonate Lens
ALMarine Grade Aluminum Housing
BSSBrush Stainless Steel Housing
PSSPainted Stainless Steel Housing
EL One-Lamp Indoor Battery
Pack (32ºF)
FS Single Fuse & Holder
KO Two 1/2" EMT Conduit Entry
Knockouts (one per end cap)
TN 5 Watt Twin Tube NPF
Night Light
DLN LED Night Light w/Light
Level Control
PMPendant Mount
Accessories
CMWCorner Mount Adapter – Wet
Location Covered, Ceiling only
9500POSIGRIP™ Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
77
Sheriff™
SH824 and SH848 SERIES
Ceiling/Wall Mount/surface
Lamps: T8, T5, T5HO
Size: Nominal 8"x24" and 8"x48"
PROJECT INFORMATION
Width Length
8.31" 24.75"
8.31" 48.75"
Job Name
Depth
2.75"
2.75"
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: Cold formed .156" P12 polycarbonate
lens. See Options for alternate lenses.
Housing: One-piece, seam welded 16gauge CRS baseplate and end caps. Baseplate
provided with four-point (2 foot) or six-point (4
foot) mounting holes and one wireway hole
– see Cross Section/Details. TGIC polyester
powder coat – 5-stage pre-treatment. Salt
spray test: 1,000 hours; Reflectance: 92%.
Lens is positioned in baseplate channels and
retained with stainless steel POSIGRIP™
fasteners two fasteners/2 foot; six fasteners/4
foot). Baseplate/end caps mount flush to ceiling or wall surface.
Electrical: Class P ballasts. Fluorescent
electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute
nickel-cadmium battery pack (EL) includes
inverter charger, test switch and charging
indicator lamp – indoor use only.
Sockets: Shock-resistant sockets with
internal locking collar to ensure positive lamp
retention.
Hardware: Stainless steel POSIGRIP™
fasteners secure lens in baseplate channel.
Listings/Certifications: UL and CUL
listed for Damp Locations – wall mount. UL
and CUL listed for Wet Location – covered
ceilings only.
Installation: Four-point (2 foot) or sixpoint (4 foot) mounting required for Peace of
Mind Lifetime Guarantee™.
PHOTOMETRICs: For additional photometric
information, go to www.kenall.com.
DIMENSIONAL DATA
Cross Section
Baseplate
48.75"
(1238mm)
8.312"
16.00"
(406mm)
(211mm)
2.75"
(69mm)
32.00"
(812mm)
3.50"
(89mm)
6.50"
(165mm)
(2) keyholes for
temporary "J"
box instalation
1.50" dia. Wire thru k.o.
24.00"
(609mm)
(2) 0.875" dia. k.o.'s
(6) .312" dia.
mounting holes
24.75"
(629mm)
16.00"
(406mm)
6.50"
(165mm)
(4) .312" dia.
mounting holes
1/2" emt hole (7/8" dia.)
ORDERING INFORMATION
Series
Length
Lamp
SH8
Lamp Ballast
Ballast
QtyTypeType
VoltageOptions Qty
Accessory
2
Nominal Length
24 2’
48
4’
Lamp Qty
2
Two Lamps
Lamp Type
Two Foot Lengths
F17T8
17
Four Foot Lengths
28
F28T5
32
F32T8
54
F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (T8, T5, T5HO)
CW Cold Weather
SB Specified Ballast
Ballast Qty
1
One
2
Two
T
Tandem Wiring
(Consult Factory)
Voltage
120 120 Volt
277 277 Volt
347 347 Volt
DV 120/277 Volts (<10% THD),
electronic ballasts only
Options
.187 .187" P12 Polycarbonate Lens
OP Opal Polycarbonate Lens
ALMarine Grade Aluminum Housing
BSSBrush Stainless Steel Housing
PSSPainted Stainless Steel Housing
EL T-8 One-Lamp Indoor Battery
Pack (32ºF)
EL2 T-8 1100 Lumen One-Lamp
Indoor Battery Pack
(32ºF) (4' only)
FS Single Fuse & Holder
KO Two 1/2" EMT Conduit Entry
Knockouts (one per end cap)
TN 5 Watt Twin Tube
NPF Night Light
DLN LED Night Light w/Light
Level Control
PMPendant Mount
Accessory
9500POSIGRIP™ Screwdriver
78
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
Sheriff™
SH1248 SERIES
Ceiling/Wall mount/surface
Lamps: T8, T5, T5HO
Size: Nominal 12"x48"
PROJECT INFORMATION
Width Length
12.3" 48.75"
Job Name
Depth
2.75"
Fixture Type
Catalog Number Approved by
SPECIFICATIONS
Lens: Cold formed .156" P12 polycarbonate
lens. See Options for alternate lenses.
Housing: One-piece, 16-gauge CRS baseplate and seam welded end caps. Baseplate
provided with four-point mounting holes and
one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage
pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%. See Options for alternative materials and finishes. Lens is positioned
in baseplate channels and retained with six
stainless steel POSIGRIP™ fasteners. Baseplate/end caps mount flush to ceiling or wall
surface.
Listings/Certifications: UL and CUL
listed for Damp Locations – wall mount. UL
and CUL listed for Wet Location – covered
ceilings only.
Electrical: Class P ballasts. Fluorescent
electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute
nickel-cadmium battery pack (EL) includes
inverter charger, test switch and charging
indicator lamp – indoor use only.
Installation: Six-point mounting required
for Peace of Mind Lifetime Guarantee™.
Sockets: Shock-resistant sockets with
internal locking collar to ensure positive lamp
retention.
PHOTOMETRICs: For additional photometric
information, go to www.kenall.com.
Hardware: Stainless steel POSIGRIP™
fasteners secure lens in baseplate channel.
DIMENSIONAL DATA
Cross Section
Baseplate
12.31"
16.00"
(406mm)
(312mm)
2.75"
(69mm)
3.50"
(89mm)
9.50"
(241mm)
1.50" Dia. Wire Thru K.O.
(2) Keyholes For
Temporary "J"
Box Installation
12.31"
(312mm)
16.00"
(406mm)
2.75"
(69mm)
48.75"
(1238mm)
32.00"
(812mm)
9.50"
(241mm)
(2) Keyholes For
Temporary "J"
Box Installation
(6) .312" Dia.
Mounting Holes
48.75"
(1238mm)
32.00"
(812mm)
3.50"
(89mm)
1.50" Dia. Wire Thru K.O.
24.00"
(609mm)
(2) 0.875" Dia. K.O.'s
(6) .312" Dia.
Mounting Holes
ORDERING INFORMATION
Series
Length
Lamp
SH12
Lamp Ballast
Ballast
QtyTypeType
VoltageOptions Qty
Accessory
48
Nominal Length
48
4’
Lamp Qty
2
Two Lamps
3
Three Lamps
4
Four Lamps
* Available with two/three lamps only.
Lamp Type
28* F28T5
32 F32T8
54* F54T5HO
Ballast Type
IS Instant Start Electronic
<10% THD (T8)
RS Rapid Start Electronic
<10% THD (T8, T5, T5HO)
CW Cold Weather
SB Specified Ballast
Ballast Qty
1
One
2
Two
T
Tandem Wiring
(Consult Factory)
Voltage
120 120 Volt
277 277 Volt
347 347 Volt (T8 only)
DV 120/277 Volts (<10% THD),
electronic ballasts only
Options
.187 .187" P12 Polycarbonate Lens
OP Opal Polycarbonate Lens
ALMarine Grade Aluminum Housing
BSSBrush Stainless Steel Housing
PSSPainted Stainless Steel Housing
EL T-8 One-Lamp Indoor Battery
Pack (32ºF)
EL2 T-8 1100 Lumen One-Lamp
Indoor Battery Pack (32ºF)
FS Single Fuse & Holder
KO Two 1/2" EMT Conduit Entry
Knockouts (one per end cap)
TN 5 Watt Twin Tube
NPF Night Light
DLN LED Night Light w/Light
Level Control
PMPendant Mount - 2 and 4 lamp
PM3Pendant Mount - 3 lamp
Accessory
9500POSIGRIP™ Screwdriver
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
79
RECOMMENDED FIXTURES FOR BUILDING EXTERIORS
For more information, visit us at www.kenall.com.
Millenium™ Rounds AND OVALS
MR17EL/ESR/EDMR17BL/BSR/BDMR17CL/CSR/CDMR17FL/FSR/FDMR17SP/RPMR17NP/WP
MR13EL/ESR/EDMR13BL/BSR/BDMR13CL/CSR/CDMR13FL/FSR/FD
MO13EL/ED MO13BL/BD
MO13CL/CDMO13FL/FD
MO13HL/HDMO13HBL/HBD
Millenium Freescale™
80
FS512R/T
FS812R/T
FS1212R/T
FS518R/T
FS818R/T
FS1218R/T
FS524R/T
FS824R/T
FS1224R/T
FS548R/T
FS848R/T
FS1248R/T
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
RECOMMENDED FIXTURES FOR BUILDING EXTERIORS
For more information, visit us at www.kenall.com.
Millenium Finite™
FN15L
FN15D
FN9L
FN9D
HERCULUX™
H69FL/FM/FD
H69EL/EM/ED
H612FL/FM/FD
H612EL/EM/ED
H99SL/SM/SD H99DSL/DSM/DSD
H1212SL/SM/SD
H1212DSL/DSM/DSD
H99FL/FM/FD
H1212FL/FM/FD
H99EL/EM/ED
H1212EL/EM/ED
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
81
QUICK SHIP
This unique two week (10 working day, holidays excluded) shipment program offers nominal four foot linear fluorescent pre-engineered Wall, Corner, Recessed or Surface fixtures for small order quantities. The weekly order quantity
maximum is 50 per customer ship to address. Standard specification sheet PDFs are available at www.kenall.com to
promote these products. No UPS shipments.
Hsg/Base Lamp
SeriesMaterialQty
LampBallastBallast
Type
TypeQtyVoltage
Lens
Inner/Outer Fastener
XWCU4
0/0
1/2
32
RS
1 or 2
120 or 277
1/B
1
TN
XCC4 XCC4
0/0
0/0
2
3
32
32
RS
RS
1 or 2 1 or 2
120 or 277
120 or 277
1/B
1/B
1
1
TN
TN
XRCA4
XRCA4
0/0
0/0
2
3
32
32
RS
RS
1 or 2
1 or 2
120 or 277
120 or 277
1/B
1/B
1
1
TN-YF
TN-YF
XRCD4
0/0
4
32
RS
1 or 2
120 or 277
1/B
1
TN-YF
XSSA4
0/0
2
32
RS
1 or 2
120 or 277
1/B
1
TN
XSSB4
XSSB4
0/0
0/0
2
3
32
32
RS
RS
1 or 2
1 or 2
120 or 277
120 or 277
1/B
1/B
1
1
TN
TN
XSSD4
0/0
4
32
RS
1 or 2
120 or 277
1/B
1
TN
XSDA4
0/0
2
32
RS
1 or 2
120 or 277
1/B
1
TN
XSDD4
0/0
3
32
RS
1 or 2
120 or 277
1/B
1
TN
Note: Lamps by others.
82
Standard
Options
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
additional literature available
architectural high abuse lighting
for schools and universities
KENALL DARK SKY LUMINAIRES
Millenium Finite™ – Wall Mount
Millenium Edge™ – Ceiling Mount
Herculux™ – Wall and Ceiling Mount
APPROVED
Dark-Sky Friendly ®
Fixture
kenall express™ – 24 hour ship
MILLENIUM FREESCALE™
ARCHITECTURAL SCONCES
architectural high abuse
lighting for schools & universities
kenall dark sky luminaires
herculux™
compact fluorescent and hid luminaires
for ceiling and Wall installation
millenium metrex™
architectural high abuse led exit signs
Attractive, Tough and Efficient
CUSTOMIZABLE LIGHTING SOLUTIONS
millenium freescale™
millenium metrex™
herculux™
Visit Kenall's web site at www.kenall.com for our latest product information.
At this site you can:
•Obtain up-to-date technical information
•Download photometric files
•View the latest product installations
The Kenall web site is frequently updated to bring you the most current information available on the full line of Kenall products.
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FAX 847-360-1781 www.kenall.com
© Copyright 2009 Kenall Manufacturing Co. Inc. All rights reserved.
83
1020 Lakeside Drive
Gurnee, Illinois 60031
847-360-8200 FAX 847-360-1781
www.kenall.com
©2009 kenall