Reset Form
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
Fixture Catalog number:
Approvals:
Fixture Options:
UE
D
Ordered Separately from Fixture
See pages 2-3
Mounting Options:
Fixture and Finish
Date:
Page: 1 of 6
Ordered Separately from Fixture
See pages 4-6
Specifications
ORDERING INFORMATION
Fixture
Finish
C745NB
Natural Brass
C745VG
Verde Green Patina
TIN
Housing: Die-cast brass body, lamp housing and socket
enclosure.
Swivel: Die-cast brass with locking teeth and K" solid brass
NPT mount. Provides horizontal rotation independent of the
threaded mount. Swivel locked by J-20 stainless set screw.
Lens Frame: Integral die-cast brass lens ring and glare shield.
Lens: Tempered clear soda lime glass with silicone gasket.
Flush with lens frame to promote water runoff when
positioned upward.
Gasketing: Silicone gaskets used throughout.
Socket: Nickel plated brass/porcelain socket. 4KV pulse rated.
Wiring: No. 18AWM rated 105°C.
Finish: Natural Brass (NB) and Verde Green Patina (VG).
Certification: UL Listed to U.S. and Canadian safety standards
for wet locations.
CO
N
Wattage / Lamp
45W - 150W
PAR38
Incandescent / Halogen
10M"
9K"r.
(261.9 mm)
6K"
(165.1 mm)
5D"
(142.9 mm)
2B"
(54.0 mm)
DIS
K" NPT
U.S. PATENT D424,731
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
UE
D
Page: 2 of 6
Fixture Options
Ordered Separately from Fixture
HL74 - Hex Cell Louver: Constructed of hex cell aluminum
louvers providing 45° cutoff, mounted in a circular frame, finished in
baked high-heat flat black. Can be used in combination with colored
lenses. Inserts behind lens into lens gasket. Cannot be used in
combination with SL spread or PL prismatic lenses.
Cat. No.
HL74
Hex Cell Louver
TIN
Lens Accessories
Cat. No. (See right)
No Option
PL74 - Prismatic Lens: Softens lamp distribution and flattens
beam spread. Best with flood lamps. Inserts behind lens into lens
gasket. Cannot be used in combination with HL74 louver.
Cat. No.
PL74
Prismatic Lens
DIS
CO
N
SL74 - Spread Lens: Creates an oval beam pattern, more narrow in
one beam axis. Best with spot lamps. Inserts behind lens into lens
gasket. Cannot be used in combination with HL74 louver.
Cat. No.
SL74
Spread Lens
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
UE
D
Page: 3 of 6
Fixture Options
Ordered Separately from Fixture
Copper
Adjustable Glare Shield
Cat. No.
Finish
AGS74NB Natural
Copper and
Brass
AGS74VG Verde Green
Patina
No Option
Spun copper shield with 45° cut and drain hole. Includes die-cast
brass lens ring. The shield is rotatable 360°. Replaces standard lens
ring/hood on fixture.
Copper
Full Glare Shield
Cat. No.
Finish
FGS74NB Natural
Copper and
Brass
FGS74VG Verde
Green
Patina
No Option
Spun copper shield with drain hole. Includes die-cast
brass lens ring. Replaces standard lens ring/hood on fixture.
Debris Screen
Cat. No.
Finish
DS74
Black
No Option
Stainless steel wire screen welded to flange, and held in place with
spring clips. Screen inserts inside full glare shield only. All debris
screens are black iridite colored.
6L"
(171.5 mm
5H" DIA.
DIS
CO
N
TIN
(144.5 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
8L"
(222.3 mm)
5N" DIA.
(141.3 mm)
32° cutoff
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
UE
D
Page: 4 of 6
Mounting Options
Ordered Separately from Fixture
Die-cast aluminum with K" NPSM fixture mount. Internal
set screw provided for locking position. Two K" NPSM in
bottom, 17 cu in. internal volume. Super TGIC powder coat
paint over clear anodizing and titanated zirconium
conversion coating.
NOTE: May also be used to hard mount low voltage fixtures.
Application Notes
• Elevates Accent Lights above ground cover to prevent
foliage from blocking the light.
• Elevates Path Lights above ground cover to achieve a
greater light throw.
CO
N
Architectural Junction
Box
Cat. No.
Finish
JB1/BL
Black
JB1/DB
Dark Bronze
JB1/GR
Verde Green
No Option
PVC fixture molded in black with K" NPT mount is
corrosion free and UV resistant. Replaces EMT, conduit
connectors and weatherproof boxes. 100% shatter resistant
against denting and cracking. Angled bottom to eliminate
cable congestion.
17K" post length
x = required depth of conduit
locallisted
codesfixture
NOTE: EP17 should be used with per
a UL
and grounding means (i.e., third wire) suitable for use
in wet locations.
“x” = required depth of conduit per local codes.
TIN
Landscape Light Post by
Engineered Products Co.
Cat. No.
EP17
No Option
3J" DIA.
K" NPT
Fixture
Mount
2J"
(57.2 mm)
x
(82.6 mm)
1"
(25.4 mm)
17K"
17K"
17
(444.5 mm)
3K"
3K"
(88.9 mm)
5"
5"
(127.0 mm)
Rigid Conduit
(by others)
3" DIA.
(76 mm)
K" NPSM
Fixture
Mount
4L"
(121 mm)
CAUTION: Junction box must be installed high enough to
avoid contact with soil or standing water.
Cast iron with K" NPSM fixture mount. Hot dip galvanized
finish. 5.5 cu in. splice compartment. (SJTW-A) 3 wire cord
and plug.
9' cord length
DIS
Portable Spear Mount
Cat. No.
J-25N
No Option
3K" DIA.
(88.9 mm)
K" NPSM
Fixture Mount
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
2J"
(57.2 mm)
6E"
6E"
(174.6 mm)
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
UE
D
Page: 5 of 6
Mounting Options
Ordered Separately from Fixture
TIN
Die-cast brass with K" NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 18 cu in. internal volume.
JBR-2 (2) K" NPT in bottom
JBR-3 (2) L" NPT in bottom
JBR-21 (2) K" NPT in sides, (2) K" NPT in bottom
JBR-24 (4) K" NPT in sides, (2) K" NPT in bottom
All side taps provided with plugs.
NOTE: May also be used to hard mount low voltage fixtures.
25 Year Limited Warranty:
Solid brass junction boxes are warranted for 25 years, from
date of sale, against manufacturing defects and failure due
to corrosion.
Application Notes
• Creates a flush-mounted appearance.
• May be cast in concrete for increased stability.
CAUTION: Fixture stem and swivel must not contact soil or
standing water. Provide drainage away from junction box.
CO
N
Brass In-grade
Architectural Junction
Box
Cat. No.
JBR-2
JBR-3
JBR-21
JBR-24
No Option
Brass In-grade Staked
Junction Box
Cat. No.
JBR30
No Option
(95.3 mm)
JBR32
BRASS IN-GRADE STAKED JUNCTION BOX WITH
CORD
Die-cast brass with K" NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 18 cu in. internal volume. (SJTW-A) 3 wire cord
and plug.
(2) 19" long brass stakes with 9' cord
25 Year Limited Warranty:
Solid brass junction boxes are warranted for 25 years, from
date of sale, against manufacturing defects and failure due
to corrosion.
Application Notes
• Creates a flush-mounted appearance.
• May be cast in concrete for increased stability.
CAUTION: Fixture stem and swivel must not contact soil or
standing water. Provide drainage away from junction box.
K"
K" NPSM
Fixture
Mount
(12.7 mm)
3"
(76.2 mm)
JBR30
BRASS IN-GRADE STAKED JUNCTION BOX
Die-cast brass with K" NPSM fixture mount and
die-cast cover. Internal set screw provided for locking
position. 18 cu in. internal volume.
(2) K" NPT in bottom with (2) 19" long brass stakes
NOTE: May also be used to hard mount low voltage fixtures.
DIS
Brass In-grade Staked
Junction Box with Cord
Cat. No.
JBR32
No Option
3L" DIA.
3L" DIA.
K" NPSM
Fixture Mount
(95.3 mm)
3K"
(88.9 mm
19C"
(492.1 mm)
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
18D"
(473.1 mm)
1"
(25.4 mm)
Scarab C745
TM
120 Volt Die-Cast Brass, PAR38 Incandescent / Halogen
revision 8/15/11 • c745.pdf
Type:
Job:
UE
D
Page: 6 of 6
Mounting Options
Ordered Separately from Fixture
3" O.D. by .188" wall cast aluminum with K" NPSM fixture
mount and hand hole with flush cover. Internal set screw
fixture lock accessible through hand hole. Internal ground
lug supplied with installed lead. Super TGIC powder coat
paint over clear anodizing and titanated zirconium
conversion coating.
NOTE: May also be used to hard mount low voltage fixtures.
TIN
Stanchion Mount
Cat. No.
Finish
SM18/BL Black
SM18/DB Dark Bronze
SM18/GR Verde Green
No Option
Cast aluminum with K" NPSM fixture mount. Internal set
screw provided for locking position. 5 cu in. internal
volume. Super TGIC powder coat paint over clear anodizing
and titanated zirconium conversion coating.
NOTE: May also be used to hard mount low voltage fixtures.
Brass Architectural Wall
Mount
Cat. No.
Finish
JWBR/NB Natural
Brass
JWBR/VG Verde Green
Patina
No Option
Die-cast brass with K" NPSM fixture mount. Internal set
screw provided for locking position. Canopy attaches to
stainless steel wall plate for mounting to any standard
electrical outlet box.
NOTE: May also be used to hard mount low voltage fixtures.
(76.2 mm)
6" Min. (152.4 mm)
12" Max. (304.8 mm)
18"
(457.2 mm)
Optional
Concrete
(by others)
DIS
CO
N
Surface Mount
Cat. No.
Finish
J-27N/BL Black
J-27N/DB Dark Bronze
J-27N/GR Verde Green
No Option
3" DIA.
K" NPSM
Fixture Mount
© 2011 KIM LIGHTING INC. • P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Rigid
Conduit
(by others)
2F"
(55.6 mm)
1L"
(44.5 mm)
K" NPSM
Fixture
Mount
4K"
(114.3 mm)
J-Box in wall (by others)
5" DIA.
(127.0 mm)
K" NPSM
Fixture Mount