For quotes & orders, please contact the
Vogue Doors office via e-mail on [email protected] or
via phone on 021 529 8040 (ext 2)
visit us at www.voguedoors.co.za
DISTRIBUTED BY:
ABOUT VOGUE DOORS
OUR FACTORY
Vogue Doors manufactures fully assembled custom made aluminium framed glass cabinet doors
and wardrobe sliding doors
Vogue Doors is the leading manufacturer of custom aluminium framed glass doors in South Africa.
Our focus is on producing exceptional quality aluminium framed glass doors for kitchen, bath, office
and furniture applications. We strive to provide the highest level of customer service and support in
a prompt and professional manner.
We have a range in natural anodised, brushed anodised, stainless steel effect and various powder
coated finishes available. Your choice of frame and one of our numerous glass insert options make
design possibilities almost endless. Features of our aluminium framed doors include: Custom made
to your specific size. No minimum orders. Lead time of 10-15 working days. Doors are fully
assembled with hinge holes as per customer specifications. Distribution through
leading hardware supplier nationally.
Vogue Doors
021 529 8040 | [email protected]
www.voguedoors.co.za
Proudly made
in South Africa
Our Vogue Doors
are made from
recyclable materials
3
ALUMINIUM CABINET DOORS
Vogue Aluminium Cabinet Doors will become a focal point in your kitchen design. Vogue Cabinet
Doors will accentuate and highlight cabinet styles. Whether used for top cupboards or bases units
they will add individuality and sophistication to your kitchen environment. Vogue Doors in your
kitchen is a great way to add colour and clean lines to your kitchen interior while maintaining the
simple design aesthetic prevalent in today’s cabinetry designs.
Quality – It’s a non-negotiable for us. We believe that our quality standard in aluminium cabinet
doors is of the highest in the industry. We strive to ensure that each door leaves the factory with the
best possible quality.
Custom manufactured – All our Vogue Doors are manufactured to our customers exact specifications with our precision cutting equipment.
Lead times – Certain doors have more steps in the manufacturing process than others, but in all
cases we strive to complete your orders in good time, maintaining our high quality standard.
Ready to hang – Our doors are sent fully assembled, in a ready to hang state. We drill for hinges and
certain lift mechanisms. We do also offer a ‘frames only’ option for those who require that.
Aluminium options – We offer a range of finishes, including: Natural Anodised, various brushed
finished (i.e. stainless steel effect) as well as a range of powder coated finishes. Please enquire with
us to see if we can accommodate your desired finish.
Design Potential – with the amount of frame options, aluminium finishes and glass choices, your
design potential is virtually endless. (Glass options on pg. 10 )
Warrantee – We offer a lifetime warrantee on the workmanship of our aluminium framed cabinet
doors for their functional lifetime.
Support Local – Our products are proudly manufactured in Cape Town, South Africa using as many
local suppliers as possible.
VD 1 - 20 X 20MM PROFILE
Available in Natural anodised, various brushed finishes and
many powder coated finishes
Accepts all 4mm glass types
Limited hardware options - Special hinge required
Cannot be used with all lift mechanisms
Cannot be used for drawer fronts
VD 2 - 45 X 20MM PROFILE
VD 3 - 50 X 22MM PROFILE
Available in Natural anodised, various brushed
finishes and many powder coated finishes
The most versatile profile
Can be used with all 4mm glass types, and all
lift mechanisms
Can be used as drawer fronts
Ideal with Sandblast film glass
Available in Natural anodised, various brushed finishes and
many powder coated finishes
Very modern minimalist looking profile
Shows a 1.5mm boarder, which finishes off the door in a neat
way, without leaving a vulnerable, exposed glass edge.
Accepts the following 4mm glass types only*: Mirror (with
vinyl backing) Colour / Back painted glass
Accepts all lift mechanisms
Can be used as drawer fronts
*Clear glass, sandblast, sandblast film, cannot be used with this
profile, as it requires the glass to be stuck down with adhesive, it
does not make use of a gasket. Therefore the adhesive would
show through the glass.
VD 4 - 45 X 16MM PROFILE
VD 5 & 6 - 32MM & 38MM STRIP HANDLE
Available in Natural anodised, various brushed
finishes and many powder coated finishes
Very modern minimalist looking profile
Frameless appearance, but therefore leaving a
vulnerable, exposed glass edge.
Accepts the following 4mm glass types only*:
Mirror (with vinyl backing) Colour / Back
painted glass
Can be used with all lift mechanisms
Can be used as drawer fronts
*Clear glass, sandblast, sandblast film, cannot be used with this
profile, as it requires the glass to be stuck down with adhesive, it
does not make use of a gasket. Therefore the adhesive would
show through the glass.
38MM
For ideal use with VD3 profile and for those
wanting some more finger grip space.
Available in 3m lengths
Stocked in Natural anodised and brushed
stainless steel effect, but can be available
in various brushed and powder coated
finishes.
Excellent handle solution
Can be cut to custom sizes
Very well suited for timber doors
Ideally fitted on the vertical side of swing
doors* and horizontal on Flap doors
*If mounted on the top or bottom of a swing
door, check for suitable clearance when in
open position.
32MM
Available in 3m lengths
Stocked in Natural anodised and brushed
stainless steel effect, but can be available
in various brushed and powder coated
finishes.
Excellent handle solution
Can be cut to custom sizes
Very well suited for timber doors
Ideally fitted on the vertical side of swing
doors* and horizontal on Flap doors
*If mounted on the top or bottom of a swing
door, check for suitable clearance when in
open position.
GLASS TYPES
There is more to glass than meets the eye. Even though our trained team in the factory handle our
glass with the utmost care, glass is fragile and can result in unfortunate, untimely breakages before
delivery takes place. In the rare cases when this happens, we always strive to correct this as soon
as possible.
We use 4mm glass – Some of the most common glass types used are:
Clear float
Clear toughened
Clear + Sandblast film
Clear + Evakote (back painted glass)
Extra White + Evakote
Mirror + safety film
Grey mirror + safety film
some important terms explained
GLASS TERMINOLOGY
Clear Float: Normal / plain glass (non-safety) Has a natural ‘greenness’ to it.
Toughened: A heating and cooling process done to float glass to make it safety glass. All cutting /
polishing / drilling holes needs to be done before the toughening process. Once glass is
toughened, it cannot be cut down / drilled into.
Extra White: This is an imported glass type that has no ‘green’ in it compared to our local glass,
and therefore if you want pure / snow white glass look or you want to try match an exact colour as
close as possible to something else, you need to use Extra white glass. (Also sometimes referred to
as OptiWhite glass)
Evakote: This is the colour coating process of spraying paint onto the glass to see the colour
through. It is a specialised procedure in which paint and a unique additive is sprayed onto the glass
to create a long lasting bond and modern look. Virtually unlimited colour options.
IMPORTANT COLOUR GLASS NOTICE
To get a ‘mint’ looking colour, use Clear glass + white Evakote, to get pure white, use Extra white
glass + white Evakote.
There is a ‘human element’ to paint mixing, matching and spraying. We strive to offer colours as
close to the require specification as possible, however exact and consistent matching is virtually
impossible. Therefore, if painted glass doors are damaged and need to be replaced at a later stage,
an exact colour match is highly unlikely. It is recommended that two doors next to one another be
resprayed together to get them matching.
Light also plays a big role in the effect of the colour glass doors. Doors fitted at right angles to one
another will receive different natural and artificial light and this may make the colour appear different
from one another. Similar effect with flap doors and base cabinet doors.
10
11
VOGUE SLIDING SYSTEMS
Wardrobe sliding doors are widely recognised as an excellent space saving and aesthetically
pleasing solution for wardrobes and other functional areas.
We have ensured that all four of our sliding systems are functional with our European sliding mechanism to ensure superior sliding quality and functionality. We have received such positive feedback
on this system that we are confident it will be right for you.
Summary:
VSS1 – Vogue Sliding System – Wood
VSS2 – Vogue Sliding System – DIY/Pre-manufactured
VSS3 – Vogue Sliding System – Symmetrical
VSS4 – Vogue Sliding system – Frameless
12
VSS1 - WOOD
The most entry level / cost effective
sliding door
8mm visible vertical upright on each
side [If you use the strip handle]
This system is designed for wood
only – it cannot incorporate glass.
General application would be with
16mm, 17mm, 19mm board, used in
conjunction
with
the
32mm
Aluminium vertical strip handle.
You may use solid timber to a maximum thickness of 32mm – [Without
strip handle]
The wheel housing is fitted to the
back, which means that the actual
doors will sit ‘off centre’ of the tracks.
The wheels will also be visible from
the back.
Cannot be used as double sided.
Ideal application – wardrobes only.
Recommended size per door
= 2500h x 1000w
Max 70 Kg per door.
16
17
VSS2 - PRE-MANUFACTURED / DIY
Entry level / contract type sliding door
18mm visible vertical upright on each
side
This system was designed for 16mm /
17mm Melamine / Veneer / Duco
Should you require the need for a
19mm board, you can router a 2mm
rebate off the back, so that it will fit
into the profile. Alternatively, us the
Vogue Sliding Wood system.
This Pre-manufactured / DIY system
is Pre-cut, drilled and self-tapped,
based on your given measurements.
It is then sent in a cardboard tube to
be assembled by yourselves, with
your cut to size board (we will provide
you with the board cutting list)
When glass / mirror is required –
there is a 4mm gasket for this profile,
so that you can mix glass and
16/17mm board.
There must always be a mix of materials in this case, the system is not
designed to just take glass [For this
need, refer to the Vogue Sliding
Symmetrical]
Can be used as a double sided door
Recommended size per door
= 2500h x 1000w
Max 70 Kg per door.
18
19
VSS3 - SYMMETRICAL
High end sliding door
22mm visible vertical upright on each
side
Can take any inlay panel for the
following thicknesses:
- 4mm – Mainly toughened glass or
mirror
- 6mm – Mainly MDF + veneer or +
duco
- 8mm – Mainly double sided colour
glass (4mm+4mm back to back)
When glass / mirror is required – this
can be ordered from us & the doors
will be delivered fully assembled.
If you are going to use 6mm MDF or
other timber material – this is to be
supplied and fitted by yourself. We
will manufacture the frames and send
in kit format.
If you require doors with sandblast
glass, clear glass or grey/bronze
tinted glass, then this is your best
sliding option.
Can be ordered as a ‘Type 1’ door, i.e
1 full sheet of glass, no dividers, or as
many dividers as you wish.
Can be used as a double sided door
Recommended size per door =
2500h x 1000w
Max 70 Kg per door.
20
21
VSS4 - FRAMELESS
Top of the range sliding door
3mm visible vertical upright on each
side
The glass covers the top horizontal
profile & the bottom horizontal profile
Glass is stuck to the frame with adhesive, therefore you can only use :
- Colour glass: Snow white or
special mix colour / Standard
‘green’ glass with dark colours /
black glass.
- Mirror: Normal silver mirror or Grey
/ Bronze mirror
- Glass with digital print / wallpaper
An alternative option is to order this
system as ‘Frames Only’ and then
supply your own 6mm MDF + Duco
or + Veneer onto the framework. Very
neat option..
Generally used for wardrobe sliding
doors, however the system can be
used for divider doors – the glass
would then need to be double sided.
Can only be ordered as a ‘Type 1’
door, i.e 1 full sheet of glass, no dividers.
Recommended size per door =
2500h x 1000w
Max 70 Kg per door.
22
23
INSTALLATION INSTRUCTIONS
TRACK DETAIL
Single Top Track
Double Top Track
Single Bottom Track
Double Bottom Track
Install top track first in the desired position,
then mark out centre positions for the lining up
of the bottom track.
For a hassle free installation, fit sliding doors
within the cupboard carcass. (do this by
extending your carcass by 100mm and fitting
the tracks within. This ensures that the opening
can be level and you can have a firmer fixing
surface.
Vogue Sliding wood requires off centre track
layout. Specification document available.
24
Fit the Sliding door by lifting the bottom wheel
into the profile and placing the top of the door
into the top track first, then lower the door
directly over the bottom track and release the
bottle wheel. Use allen key to adjust if
necessary.
Insert Track
25
RECOMMENDED DOOR OVERLAP
Please keep in mind the overlap of the sliding doors when fitting drawers behind.
There needs to be suitable clearance for proper functionality.
SOFT CLOSE
Now available with all Vogue sliding
doors. No need to worry about your
wardrobe sliding doors slamming
against the wall or side panel.
Install the soft close mechanism to
gently slow the movement of your Vogue
Sliding doors.
Soft Close comes standard on the
Vogue Sliding – Frameless and Symmetrical systems and optional on the
Pre-manufactured and Wood systems.
Technical fitting details supplied with
component.
A SPECIAL THANKS TO THE FOLLOWING COMPANIES
FOR THEIR IMAGES OF VOGUE DOORS.
lifestyle-projects.co.za
joos.co.za
spotlightkitchens.co.za