SPECIFICATIONS
LIGHTPLANE 2 ROUND
RLP2 | Wall
Find additional images and information at
alwusa.com/rlp2
LIGHTPLANE 2 ROUND – RLP2
Wall
SPECIFICATIONS
1. BASE MODEL
RLP2H
RLP2V
RLP2W1
Page 2 of 5
Horizontal wall, central canopy
Vertical wall, central canopy
Vertical wall, bottom canopy
Type:
1
Size (in Section 2) limited to lengths up to 6'
2. RUN LENGTH/
SIZE
___
Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’)
All lengths are nominal and may vary based on lamping and other
specfication selections. Consult factory when exact lengths are required.
2
3. LAMPING
LED3
LOW4
MED
HI4
TUNE 5
DECOR4
RGB
RLP2W (in Section 1) limited to lenghts up to 6'
Pair lamping with CCT (where applicable), ex: MED/2700K
Low-output, high-performance LED – 551 delivered lm/ft, 7.2 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
Medium-output, high performance LED – 735 delivered lm/ft, 9.6 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
High-output, high-performance LED – 919 delivered lm/ft, 12.0 W/lf, 76 lm/W
2700K
3000K
3500K
4000K
Tunable white LED, 2700K-5700K – 613 delivered lumens, 8.0 W/lf, 76 lm/W
(must select DMX driver below; controller not included)
Decorative constant voltage LED, 267 delivered lm/ft, 5.9 W/lf, 45 lm/W
3000K
3500K
4000K
Color-changing RGB LED, 5 W/lf
(must select DMX driver below; controller not included)
3
LED board options may be limited and/or subsituted to accomodate requests
for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
4
Performance calculations are extrapolated estimates based on the actual
IES test results of MED option at 3500K
5
Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs
based on the actual IES test results of MED option at 3500K. Cooler and warmer CCT
settings will provide lower delivered lumens, lower lm/W and higher W/lf.
FLUORESCENT
1T5
1T5HO
Lamps not provided
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 2 ROUND – RLP2
Wall
SPECIFICATIONS
4. DRIVER
LED
0/10V/
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI
DMX
HILUME/A3
DALI dimming to 0%
DMX dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
Page 3 of 5
1% Dimming to 1%
0% Premium dimming to 0%
FLUORESCENT
STD Standard, non-dimming, <10% THD
FL/0/10V Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTARStep-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
5. LENS
LENS
Extra diffuse, flush
LENS
6. FINISH
AL
Standard, natural “Ultimatte” aluminum
BK Black powdercoat
WH
White powdercoat
RAL/ ___ Specify RAL powdercoat code (ex: #RAL/3003)
7. VOLTAGE
120
277
UNV
3476
120 volt
277 volt
Universal voltage
347 volt
6
8. ADDITIONAL
OPTIONS
Driver/ballast options may be limited with 347 voltage. Consult factory.
NONE
None
EMC/___7
Emergency circuit (indicate total quantity, ex: EMC/4)
EMB/___7 Remote Emergency battery pack (indicate total quantity, ex: EMB/4)
ENLGHT/___8,9,10 Enlighted ® 0-10V remoted smart sensor (occupancy, daylight, networking and more)
OS/___9,10 0-10V remoted occupancy sensor (indicate total quantity, ex: OS/4)
PH/___9,10 0-10V remoted photocell/daylight sensor (indicate total quantity, ex: PH/4)
7
Consult factory for available options
Enlighted Gateway and Energy Manager (by others) plus programming required.
Learn more at enlightedinc.com.
9
Compatible with 0-10V driver only. Contact factory for alternative options.
10
Select quantity of 1 for every 8 ft. (ex:ENLGHT3 for a 24' fixture run; OS4 for a 32' fixture run)
8
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 2 ROUND – RLP2
Wall
SPECIFICATIONS
Page 4 of 5
DIMENSIONS
"
3
3 4"
1
3
22 48""
3
2 4"
5
4 8"
3
2 4"
1
1
2214""
4
2 4"
WALL MOUNT
1
1
2 4
2 4"
MOUNTING OPTIONS
HORIZONTAL WALL, CENTRAL CANOPY
(RLP2H)
VERTICAL WALL, CENTRAL CANOPY
(RLP2V)
VERTICAL WALL, BOTTOM CANOPY
(RLP2W)
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 2 ROUND – RLP2
Wall
SPECIFICATIONS
HOUSING
Page 5 of 5
LINEAR LENS OPTIONS
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
Extruded, twin-layered, high-impact acrylic. EXT is
white and extra diffuse with minimal-to-no source
visibility.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers
are Class 2. L80 >50,000 hours. 80+ CRI.
ETL listed for damp location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit
and/or emergency battery backup. Consult factory
for details.
EXT Lens
FINISH
Standard finish is "Ultimatte" aluminum — a smooth,
clean and durable finish achieved from a deep-etch
and two-step clear anodizing process. White, black
and color RAL powdercoat options also available.
ALUMINUM – AL
WHITE – WH
BLACK – BK
COLOR – RAL
© 2016 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
1035 22nd Avenue, Unit 1
n
Oakland, CA 94606
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n