V-‐Count 3D+ set consists of 3 pieces of software and they are

V-­‐Count 3D+ set consists of 3 pieces of software and they are configured in 2 different hardware: 1. Hardware V-­‐Count 3D+ Hardware Version 5.x.2 Software V-­‐Count People Counting 2. 3. V-­‐Count 3D+ V-­‐Count Satellite 5.x.2 6.x.2 V-­‐Count Slave V-­‐Count Satellite -­‐The software is included in V-­‐Count People counter and V-­‐Count Slave hardware which has double cameras. Their visuals are identical with V-­‐Count 3D. -­‐Those devices are going to be installed exactly like V-­‐Count 3D, which is just above the entrance. -­‐V-­‐Count Sattellite is going to be installed approximately 4 meters from V-­‐Count 3D+ inside the store. -­‐The ports of devices are as below: V-­‐Count Satellite V-­‐Count Satellite 192.168.1.31 Default IP 13102/13103 Web Interface Port 13104 SSH port 12100/12101 Cloud data write port 13108/13109 V-­‐Count 3D+ V-­‐Count People Counter 192.168.1.30 12108/12109 Web Interface Port 12102/12103 Web Interface Port 12104 SSH port -­‐-­‐ 12100/12101 Cloud data write port Data Write port to Slave data read port 13108/13109 -­‐-­‐ Satellite 12223 Time Port which is taken from Cloud V-­‐Count Slave System in here Works basically as below: -­‐Results are being sent to Cloud by V-­‐Count Satellite and V-­‐Count People Counter. -­‐V-­‐Count Slave sends its results to V-­‐Count Satellite. -­‐The calibration and settings of V-­‐Count 3D+ are exaclty the same with the V-­‐Count 3D. -­‐Serial ID addition, Cloud settings and calibration are exactly the same. Wi-­‐Fi system is added to our basic system. Put in use of V-­‐Count Wi-­‐Fi System There are two systems, which should be set up: -­‐V-­‐Count Slave -­‐V-­‐Count Satellite Since slave is inside of the 3D, its ports should be different than 3D+. cloud.v-­‐count.com 12100 12100 12223 12223 V-­‐Count S atellite 13108/13109 Slave-­‐Satellite V-­‐Count 3D+ (People Counter +Slave) Satellite Web Interface: 13102/13103 SSH: 13104 SLAVE Web Interface : 12108/12109 SSH: 12104 People Counter Web Interface: 12102/12103 SSH: 12104 In this scheme ports, which are going to be directed can be seen. The ports which are going to be reached from outside are as below: Ports for Port Forwarding To V-­‐Count Satellite IP Address To V-­‐Count 3D+ Adress 13102, 13103, 13104 12102, 12103, 12104, 12108, 12109 Access for cloud.v-­‐count.com For V-­‐Count Satellite IP Address For V-­‐Count 3D+ IP Address 12100,12223 12100,12223 13108,13109 ports are the ports for internal communication between devices. For devices/software, which are installed more than 1; Next port which is given to next device should be +10 of old one. Ex: When 3 V-­‐Count 3D+ and 2 V-­‐Count Satellite are being installed: 1. V-­‐Count 3D+ Device 12102, 12103, 12104, 12108, 12109 2. V-­‐Count 3D+ Device 12112, 12113, 12114, 12118, 12119 3. V-­‐Count 3D+ Device 12122, 12123, 12124, 12128, 12129 1. V-­‐Count Satellite 13102, 13103, 13104 2. V-­‐Count Satellite 13112, 13113, 13114 Ports are being forwarded.