EPIGAP Optronic GmbH
Koepenicker Str. 325b
D-12555 Berlin
Fon: +49 (0)30 657637 60
Fax: +49 (0)30 657637 70
[email protected]
Data Sheet
Yellow-Orange SMD-LED
page 1 of 3
Rev. 03, 2017
EOLS-600-496
Radiation
yellow-orange
Type
AlInGaP
Case
SMD 3838 (1515)
Description:
- Size 3.8 (W) x 3.8 (L) x 1.0 (H) mm
- Circuit substrate: AIN ceramics
- Devices are RoHS conform
- Lead free solderable, soldering pads: silver plated
- Marking at cathode
Maximum Ratings
Tamb= 25°C, unless otherwise specified
Parameter
Forward current
Peak forward current
Reverse voltage
Reverse current
Operating temperature range
Storage temperature range
Thermal resistance
Optical and Electrical Characteristics
Tamb= 25°C, unless otherwise specified
Parameter
Symbol
VF
Forward voltage
Iv
Luminous intensity
λ
Dominant wavelength
d
Test conditions
tp ≤ 100 µs, τ =1:10
Symbol
IF
IFM
VR
IR
Tamb
Tstg
RthJA
Conditions
IF= 350 mA
IF= 350 mA
IF= 350 mA
Min
7000
590
typ
2.2
600
Value
350
800
1
20
-40 to +85
-40 to +85
10
Unit
mA
mA
V
max
3.0
12000
610
Unit
V
mcd
nm
µA
°C
°C
K/W
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All
operating parameters must be validated for each customer application by the customer.
EPIGAP Optronic GmbH
Koepenicker Str. 325b
D-12555 Berlin
Fon: +49 (0)30 657637 60
Fax: +49 (0)30 657637 70
[email protected]
Data Sheet
Yellow-Orange SMD-LED
EOLS-600-496
page 2 of 3
Rev. 03, 2017
Intensity vs. Forward Current
Forward Current vs. Operating Temperature
View Angle
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All
operating parameters must be validated for each customer application by the customer.
EPIGAP Optronic GmbH
Koepenicker Str. 325b
D-12555 Berlin
Fon: +49 (0)30 657637 60
Fax: +49 (0)30 657637 70
[email protected]
Data Sheet
Yellow-Orange SMD-LED
EOLS-600-496
page 3 of 3
Rev. 03, 2017
Recommended Soldering Pattern
Art. No. 133 207
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All
operating parameters must be validated for each customer application by the customer.