NEW CHAINSAW
GS 35 C GS 350 C
NEW CHAINSAW
GS 35 C GS 350 C
Chainsaw
designed to provide a reliable and eco-
technical features that enhance quality and cutting
compatible solution for home users for limbing and
performance while guaranteeing compliance with anti-
pruning, cutting small-medium diameter trunks
pollution regulations. The new engines, designed to
and general firewood duties.
limit noise levels and the emission of unburnt
Developed using technology associated with higher
hydrocarbons (HC + NOx), ensure low running costs
category chainsaws, this model incorporates several
and environmental respect.
New automatic constant flow rate oiler: the
oiler operates only when the chain is running. so
no oil used unless the tool is actually cutting.
Nickel-plated cylinder, aluminium breech,
forged and machined 3-piece steel crankshaft
and connecting rod, big end roller cage, small
end roller bearing.
Primer device: boosts the fuel flow to the
carburettor to facilitate cold starts, starts after
refuelling, and starts after long periods of disuse.
Carburettor installed on 4 antivibration mounts:
improved stability and more reliable use of the
tool.
Large size sponge + cloth air filter: guarantees
high filtration efficiency and easy maintenance.
Naturally advanced
A series of design features optimize the practicality and ease of use of the tool,
allowing anyone to work with the chainsaw with confidence.
Antivibration system composed of 3 springtype and 3 rubber shock absorbers: protect
operator from vibration to ensure enhanced levels
of comfort.
Large size ergonomically shaped inertia
brake lever mounted to crankcase at two points:
designed to ensure correct brake activation in all
working conditions and positions.
The illustrated step-by-step start-up
instructions ensure quick and safe starting, even
for inexpert users.
On-Off switch and choke incorporated in a
single multifunction lever: guaranteed practicality
and ease of use.
Transparent tanks: oil and fuel levels checked
at a glance.
TECHNICAL DATA
. Power/Displacement
. Bar length
. Chain (pitch x gauge)
. Oiler
. Oil reservoir / fuel tank capacity
. Weight
2.0 HP - 1.5 kW/38.9 cm
35-41 cm / 14”-16”
3/8” x .050”
automatic
0.26 L / 0.36 L
4.4 Kg
3
NEW CHAINSAW
001101915
GS 35 C GS 350 C
It’s an Emak S.p.A. trademark
42011 Bagnolo in Piano (RE) Italy
Tel. +39 0522 956611 • Fax +39 0522 951555
[email protected] • www.myoleomac.com
www.youtube.com/MyOleoMac