Title of the Paper Prepared for BWP 2016
(Each Word of the Title should be capitalised)
Name Surname 1, Name Surname 2
1 Department/ Division/Centre
Institute/ University/ Company
2 Department / Division/Centre
Institute/ University/ Company
12 Main Street, City, Code City, Country
[email protected], [email protected]
PAPER
This file provides a template for writing papers for the BWP 2016 conference. The
proceedings will be published in an electronic format. The full paper in MS Word file shall be
written in compliance with these instructions. It will be converted into Portable Document Format
(PDF), before publishing.
Please send your paper as a word file (97, 2000, 2003, XP or 2007). The authors should
use this template file to write their papers including; related conference topic, full title, full name
and address of author(s) for all correspondence(s), full name, affiliation, phone, fax, e-mail,
purpose of the work, approach, scientific innovation and relevance, quite brief insights about the
results and conclusions of the work.
Keywords: Renewable energy, carbon capture.
INTRODUCTION
The objective of this template is to help you to style your paper in an easy way in a word file. This
will help the final appearance of your paper in print and media to be very similar. We are
providing this document as a template for paper submissions to BWP 2016. Proceedings will be
produced directly from these electronic files in this format.
We will get back to you with the reference number as a filename, for example BWP2016.doc.
The main text of the manuscript should be divided into sections. The paper length, including
figures, tables and references should not exceed 8 pages.
Papers are to be prepared in Portuguese, Spanish or English (British or American) and IS-units
(International System Units) shall be used. Acronyms should be written out at their first
appearance.
PAPER FORMAT
The authors should use this template file to write their manuscripts. Please note the following
details: this template is on A4 page format with 20 mm margins on left, right, top and bottom.
Header and footer shall be positioned 16 mm from the edge.
All text paragraphs should be spaced 6 pt, with first line intended by 10 mm. Double spacing
should only be used before and after headings and subheadings as shown in this example.
Position and style of headings and subheadings should follow this example. No spaces should be
placed between paragraphs. Please DO NOT change any of the above mentioned page,
paragraph and font settings.
Fonts
Papers should use 12-point Arial font. The styles available are bold, italic and underlined.
It is recommended that text in figures is not smaller than 10-point font size.
Tables and Figures
Figure captions and table headings should be sufficient to explain the figure or table without
needing to refer to the text. Figures and tables not cited in the text should not be presented.
Styles Heading Table and Caption Figure are available in this template for tables and figures.
"Use of Color and Line Density”; The Proceedings are to be printed in black and white, so, do
not use color for emphasis, use line thickness in your graphics and sketches in your full paper.
The following is the example for Table 1.
Table 1 Title of Example Table
Factor
Prefix
Symbol
1024
yotta
Y
1021
zetta
Z
1018
exa
E
Tables and figures should be placed close after their first reference in the text. All figures and
tables should be numbered with Arabic numerals. Table headings should be centred above the
tables. Figure captions should be centred below the figures. An example is shown in Figure 1.
Figure 1 – Annual Precipitation.
Equations
Each equation should be presented on a separate line from the text with a blank space above
and below. Equations should be clear and expressions used should be explained in the text. The
equations should be numbered consecutively at the outer right margin, as shown in Eq. (1) and
(2) below:
  
2
    2  2 T
E  0.49 H s T e 1  H 2 H  2 HT H T  H T 2 H
Hs
H sT e
H sTe

Q =  kA
dT
dx




(1)
(2)
References
Reference numbers in the text should be designated by square brackets, e.g., [1-4]. The
references should be listed in the same order as cited in the text. See also examples in the
REFERENCES section of this template [1-4].
SUBMITTING THE PAPER
Speakers should send their presentation electronically on May 30th, or earlier, by a link at the
event website. Abstracts sent by e-mail, fax or postal will not be accepted.
CONCLUSION
Please note that the references at the end of this document are in the preferred referencing style.
Give all authors’ names; do not use “et al.” unless there are six authors or more. Use a space
after authors' initials. Please give affiliations and addresses for private communications.
Capitalize only the first word in a paper title, except for proper nouns and element symbols. For
papers published in translation journals, please give the English citation first, followed by the
original foreign-language citation.
All publications cited in the text should be presented in a list of full references in the Reference
section as they appear in the text (not in alphabetical order). Typical examples of references are
as follows:
Journal references should contain: name of author(s); year; article title; journal name (in
italic); volume; issue number; and page number(s). Typical example: [1] Zonooz, M.R.F., Nopiah,
Z.M., Yusof, A.M. and Sopian, K. 2009. A review of MARKAL energy modeling. European Journal
of Scientific Research 26(3): 352-361.
Book references should contain: name of author(s); year of publication; title; edition; location
and publisher. Typical example: [2] Çengel, Y.A., Boles, M.A. 2002. Thermodynamics. Newyork:
Mcgraw-hill.
Proceedings reference example: [3] Mayer, A., Biscaglia, S. 1989. Modelling and analysis
of lead acid battery operation. In Proceedings of the Ninth EC PV Solar Conference. Reiburg,
Germany, 25-29 September. London: Kluwer Academic Publishers.
Review reference example: [4] Lehmann, J., Gaunt, J., & Rondon, M. (2006). Bio-char
Sequestration in Terrestrial Ecosystems — a review. Mitigation and Adaptation Strategies for
Global Change, 11, 403-427.
Technical Paper reference example: [5] Parry, M. L., Canziani, O. F., Palutikof, J. P., van
der Linden, P. J., & Hanson, C. E. Eds. Contribution of Working Group II to the Fourth Assessment
Report of the Intergovernmental Panel on Climate Change, Cambridge, UK, 976
Online journal reference example: [6] Folger, P. (2009). Carbon Capture and Sequestration
(CCS). Congressional Research Service, Retrieved November 14, 2009 from the World Wide Web:
http://ncseonline.org/NLE/ CRSreports/09July/RL33801.pdf.
MISCELLANEOUS RECOMMENDATIONS
Do not number the Acknowledgements, NOMENCLATURE, References and APPENDIX section
headings. Do not use page numbers or any other headers or footers in the paper.
ACKNOWLEDGEMENTS
This section is optional. If used, try to keep acknowledgements as brief as possible.
NOMENCLATURE
Nomenclature, if needed, appears before the references list. In this section, give SI (MKS) units,
abbreviations, symbols, Greek letters used in the text.
REFERENCES
[1] Zonooz, M.R.F., Nopiah, Z.M., Yusof, A.M. and Sopian, K. 2009. A review of MARKAL energy
modeling. European Journal of Scientific Research 26(3): 352-361.
[2] Çengel, Y.A., Boles, M.A. 2002. Thermodynamics. Newyork: Mcgraw-hill.
[3] Mayer, A. and Biscaglia, S. 1989. Modelling and analysis of lead acid battery operation. In
Proceedings of the Ninth EC PV Solar Conference. Reiburg, Germany, 25-29 September. London:
Kluwer Academic Publishers.
[4] Lehmann, J., Gaunt, J., & Rondon, M. (2006). Bio-char sequestration in terrestrial ecosystems —
a review. Mitigation and Adaptation Strategies for Global Change, 11, 403-427.
[5] Parry, M. L., Canziani, O. F., Palutikof, J. P., van der Linden, P. J., & Hanson, C. E. Eds.
Contribution of Working Group II to the Fourth Assessment Report of the Intergovernmental Panel
on Climate Change, Cambridge, UK, 976
[6] Folger, P. (2009). Carbon capture and sequestration (CCS). Congressional Research Service,
Retrieved November 14, 2009 from the World Wide Web: http://ncseonline.org/NLE/
CRSreports/09July/RL33 801.pdf.
APPENDIX
Appendixes, if needed, appear after the references list.
BIOGRAPHIES
(The names, the vitae and the research interests of the authors should be given at the end of the
paper.)
First Author’s Name – The first paragraph may contain a place and/or date of birth (list place,
then date). Next, the author’s educational background is listed: type of degree in what field, which
institution, city, state or country, and year degree was earned. The author’s major field of study
should be written.
The second paragraph uses the pronoun of the person (he or she) and not the author’s last
name. Information concerning previous publications may be included. Current and previous
research interests end the paragraph.
The third paragraph begins with the author’s title and last name (e.g., Dr. David, Prof. Kim, Mr.
Taylor, Ms. Cornwell). List any memberships in professional societies. Personal hobbies will be
deleted from the biography.
Second Author’s Name – The first paragraph may contain a place and/or date of birth (list
place, then date). Next, the author’s educational background is listed: type of degree in what field,
which institution, city, state or country, and year degree was earned. The author’s major field of
study should be written.
The second paragraph uses the pronoun of the person (he or she) and not the author’s last
name. Information concerning previous publications may be included. Current and previous
research interests end the paragraph.
The third paragraph begins with the author’s title and last name (e.g., Dr. David, Prof. Kim, Mr.
Taylor, Ms. Cornwell). List any memberships in professional societies. Personal hobbies will be
deleted from the biography.
Third Author’s Name – The first paragraph may contain a place and/or date of birth (list
place, then date). Next, the author’s educational background is listed: type of degree in what field,
which institution, city, state or country, and year degree was earned. The author’s major field of
study should be written.
The second paragraph uses the pronoun of the person (he or she) and not the author’s last
name. Information concerning previous publications may be included. Current and previous
research interests end the paragraph.
The third paragraph begins with the author’s title and last name (e.g., Dr. David, Prof. Kim, Mr.
Taylor, Ms. Cornwell). List any memberships in professional societies. Personal hobbies will be
deleted from the biography.